Now that hpd/display related calls are split from the rest in
intel_irq_init(), skip all of that in case we don't have display.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-8-lucas.demarchi@intel.com

In intel_irq_init() move what's display/hpd related after what is gt and
guc. This makes it easier to support !HAS_DISPLAY() in future.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-7-lucas.demarchi@intel.com

Use the convention of new platforms first. No need to special case
HAS_GMCH() since that stopped being true at the lattest on gen8 (for
cherryview).
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-6-lucas.demarchi@intel.com

!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com

Display is always disabled and enabled when resetting any engine, but if
there is no display it should not do anything with display and only
reset the needed engines.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-3-lucas.demarchi@intel.com

Rename intel_finish_reset to intel_display_finish_reset, so it's clear
from gt/ that we are calling out the display code.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-2-lucas.demarchi@intel.com

Rename intel_prepare_reset to intel_display_prepare_reset, so it's clear
from gt/ that we are calling out the display code.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-1-lucas.demarchi@intel.com

Reduce this maintenance nightmare a bit by converting the plane
min/max width/height stuff into vfuncs.

Now, if I could just think of a nice way to also use this for
intel_mode_valid_max_plane_size()...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924185113.30849-1-ville.syrjala@linux.intel.comReviewed-by: Aditya Swarup <aditya.swarup@intel.com>

JSL has update in vswing table for eDP.

BSpec: 21257

Changes since V1:
        - Fixed few checkpatch errors

Cc: Souza Jose <jose.souza@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020053657.99890-1-tejaskumarx.surendrakumar.upadhyay@intel.com

DG1 uses 2 registers for the ddi clock mapping, with PHY A and B using
DPCLKA_CFGCR0 and PHY C and D using DPCLKA1_CFGCR0. Hide this behind a
single macro that chooses the correct register according to the phy
being accessed, use the correct bitfields for each pll/phy and implement
separate functions for DG1 since it doesn't share much with ICL/TGL
anymore.

The previous values were correct for PHY A and B since they were using
the same register as before and the bitfields were matching.

v2: Add comment and try to simplify DG1_DPCLKA* macros by reusing
previous ones
v3:
  - Fix DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK() after wrong macro reuse
  - Move phy -> id map to a separate macro (Aditya)
  - Remove DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK where not required
    (Aditya)
  - Use drm_WARN_ON

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106210006.837953-1-lucas.demarchi@intel.com

To help diagnose modifier related issues let's include that
information in the various state dumps.

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103153026.16566-1-ville.syrjala@linux.intel.comAcked-by: Simon Ser <contact@emersion.fr>

Sort the EHL/JSL PCI IDs numerically. Some order seems better than
randomness.

v2: Deal with the JSL vs. EHL split
v3: Rebase due to 0x4500 removal

Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030164124.16922-1-ville.syrjala@linux.intel.com

As per W/A implemented for TGL to program half of the nominal
DCO divider fraction value which is also applicable on EHL.

Changes since V2:
	- Apply stepping B0 till FOREVER
	- B0 - revid update as per Bspec 29153
Changes since V1:
        - ehl_ used as to keep earliest platform prefix
        - WA required B0 stepping onwards

Cc: Deak Imre <imre.deak@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104050655.171185-1-tejaskumarx.surendrakumar.upadhyay@intel.com

Replace the previous approach to force compute the initial PSR state
after i915 take over from firmware by the better and recently added
initial_fastset_check() hook.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221048.104294-1-jose.souza@intel.com

Catch up with v5.10-rc2 and drm-misc-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Fix a typo that led to some MST short pulse event handling issue (the
short pulse event was handled for both encoder instances, each having
its own state).

Fixes: 1d8ca002 ("drm/i915: Add PORT_TCn aliases to enum port")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104010000.4165574-1-imre.deak@intel.com

Merge tag 'drm-intel-next-queued-2020-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 features for v5.11

Highlights:
- More DG1 enabling (Lucas, Matt, Aditya, Anshuman, Clinton, Matt, Stuart, Venkata)
- Integer scaling filter support (Pankaj Bharadiya)
- Asynchronous flip support (Karthik)

Generic:
- Fix gen12 forcewake tables (Matt)
- Haswell PCI ID updates (Alexei Podtelezhnikov)

Display:
- ICL+ DSI command mode enabling (Vandita)
- Shutdown displays grafecully on reboot/shutdown (Ville)
- Don't register display debugfs when there is no display (Lucas)
- Fix RKL CDCLK table (Matt)
- Limit EHL/JSL eDP to HBR2 (José)
- Handle incorrectly set (by BIOS) PLLs and DP link rates at probe (Imre)
- Fix mode valid check wrt bpp for "YCbCr 4:2:0 only" modes (Ville)
- State checker and dump fixes (Ville)
- DP AUX backlight updates (Aaron Ma, Sean Paul)
- Add DP LTTPR non-transparent link training mode (Imre)
- PSR2 selective fetch enabling (José)
- VBT updates (José)
- HDCP updates (Ramalingam)

Cleanups and refactoring:
- HPD pin, AUX channel, and Type-C port identifier cleanup (Ville)
- Hotplug and irq refactoring (Ville)
- Better DDI encoder and AUX channel names (Ville)
- Color LUT code cleanups (Ville)
- Combo PHY code cleanups (Ville)
- LSPCON code cleanups (Ville)
- Documentation fixes (Mauro, Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87o8kehbaj.fsf@intel.com

drm-misc-next for 5.11:

UAPI Changes:

  - doc: rules for EBUSY on non-blocking commits; requirements for fourcc
    modifiers; on parsing EDID
  - fbdev/sbuslib: Remove unused FBIOSCURSOR32
  - fourcc: deprecate DRM_FORMAT_MOD_NONE
  - virtio: Support blob resources for memory allocations; Expose host-visible
    and cross-device features

Cross-subsystem Changes:

  - devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display
    Optoelectronics
  - dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag;
    dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro

Core Changes:

  - atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during
    non-blocking commits
  - dp: Prepare for DP 2.0 DPCD
  - dp_mst: Receive extended DPCD caps
  - dma-buf: Documentation
  - doc: Format modifiers; dma-buf-map; Cleanups
  - fbdev: Don't use compat_alloc_user_space(); mark as orphaned
  - fb-helper: Take lock in drm_fb_helper_restore_work_fb()
  - gem: Convert implementation and drivers to GEM object functions, remove
    GEM callbacks from struct drm_driver (expect gem_prime_mmap)
  - panel: Cleanups
  - pci: Add legacy infix to drm_irq_by_busid()
  - sched: Avoid infinite waits in drm_sched_entity_destroy()
  - switcheroo: Cleanups
  - ttm: Remove AGP support; Don't modify caching during swapout; Major
    refactoring of the implementation and API that affects all depending
    drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of
    TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify()
    callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE;
    Replace caching flags with init-time cache setting; Push ttm_tt_bind() into
    drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy();
    no more ttm_set_populated()
  - vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM
    object functions with defaults; Default placement in system memory; Cleanups

Driver Changes:

  - amdgpu: Use GEM object functions
  - armada: Use GEM object functions
  - aspeed: Configure output via sysfs; Init struct drm_driver with
  - ast: Reload LUT after FB format changes
  - bridge: Add driver and DT bindings for anx7625; Cleanups
  - bridge/dw-hdmi: Constify ops
  - bridge/ti-sn65dsi86: Add retries for link training
  - bridge/lvds-codec: Add support for regulator
  - bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups
  - display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
    dma-coherent
  - display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
    dma-coherent
  - etnaviv: Use GEM object functions
  - exynos: Use GEM object functions
  - fbdev: Cleanups and compiler fixes throughout framebuffer drivers
  - fbdev/cirrusfb: Avoid division by 0
  - gma500: Use GEM object functions; Fix double-free of connector; Cleanups
  - hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups
  - i915: Use GEM object functions
  - imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups
  - ingenic: Reset pixel clock when parent clock changes; support reserved
    memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats;
    Revert support for cached mmap buffers
    on F0/F1; support 30-bit/24-bit/8-bit-palette modes
  - komeda: Use DEFINE_SHOW_ATTRIBUTE
  - mcde: Detect platform_get_irq() errors
  - mediatek: Use GEM object functions
  - msm: Use GEM object functions
  - nouveau: Cleanups; TTM-related changes; Use GEM object functions
  - omapdrm: Use GEM object functions
  - panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT
    bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30;
    Cleanups
  - panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes()
  - panel/otm8009a: Allow non-continuous dsi clock; Cleanups
  - panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS
  - panfrost: Fix job timeout handling; Cleanups
  - pl111: Use GEM object functions
  - qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved()
  - radeon: Cleanups; TTM-related changes; Use GEM object functions
  - rockchip: Use GEM object functions
  - shmobile: Cleanups
  - tegra: Use GEM object functions
  - tidss: Set drm_plane_helper_funcs.prepare_fb
  - tilcdc: Don't keep vblank interrupt enabled all the time
  - tve200: Detect platform_get_irq() errors
  - vc4: Use GEM object functions; Only register components once DSI is attached;
    Add Maxime as maintainer
  - vgem: Use GEM object functions
  - via: Simplify critical section in via_mem_alloc()
  - virtgpu: Use GEM object functions
  - virtio: Implement blob resources, host-visible and cross-device features;
    Support mapping of host-allocated resources; Use UUID APi; Cleanups
  - vkms: Use GEM object functions; Switch to SHMEM
  - vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all()
  - xen: Use GEM object functions
  - xlnx: Use GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g

Update the EHL PCI IDs from BSpec.
Remove the invalid ones.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102193034.28055-1-anusha.srivatsa@intel.com

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Pull x86 fixes from Thomas Gleixner:
 "Three fixes all related to #DB:

   - Handle the BTF bit correctly so it doesn't get lost due to a kernel
     #DB

   - Only clear and set the virtual DR6 value used by ptrace on user
     space triggered #DB. A kernel #DB must leave it alone to ensure
     data consistency for ptrace.

   - Make the bitmasking of the virtual DR6 storage correct so it does
     not lose DR_STEP"

* tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)
  x86/debug: Only clear/set ->virtual_dr6 for userspace #DB
  x86/debug: Fix BTF handling

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timers/timekeeping:

   - Prevent undefined behaviour in the timespec64_to_ns() conversion
     which is used for converting user supplied time input to
     nanoseconds. It lacked overflow protection.

   - Mark sched_clock_read_begin/retry() to prevent recursion in the
     tracer

   - Remove unused debug functions in the hrtimer and timerlist code"

* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Prevent undefined behaviour in timespec64_to_ns()
  timers: Remove unused inline funtion debug_timer_free()
  hrtimer: Remove unused inline function debug_hrtimer_free()
  time/sched_clock: Mark sched_clock_read_begin/retry() as notrace

Pull smp fix from Thomas Gleixner:
 "A single fix for stop machine.

  Mark functions no trace to prevent a crash caused by recursion when
  enabling or disabling a tracer on RISC-V (probably all architectures
  which patch through stop machine)"

* tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine, rcu: Mark functions as notrace

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - Fix incorrect failure injection handling in the fuxtex code

   - Prevent a preemption warning in lockdep when tracking
     local_irq_enable() and interrupts are already enabled

   - Remove more raw_cpu_read() usage from lockdep which causes state
     corruption on !X86 architectures.

   - Make the nr_unused_locks accounting in lockdep correct again"

* tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix nr_unused_locks accounting
  locking/lockdep: Remove more raw_cpu_read() usage
  futex: Fix incorrect should_fail_futex() handling
  lockdep: Fix preemption WARN for spurious IRQ-enable

Pull char/misc fixes/removals from Greg KH:
 "Here's some small fixes for 5.10-rc2 and a big driver removal.

  The fixes are for some reported issues in the interconnect and
  coresight drivers, nothing major.

  The "big" driver removal is the MIC drivers have been asked to be
  removed as the hardware never shipped and Intel no longer wants to
  maintain something that no one can use. This is welcomed by many as
  the DMA usage of these drivers was "interesting" and the security
  people were starting to question some issues that were starting to be
  found in the codebase.

  Note, one of the subsystems for this driver, the "VOP" code, will
  probably come back in future kernel versions as it was looking to
  potentially solve some PCIe virtualization issues that a number of
  other vendors were wanting to solve. But as-is, this codebase didn't
  work for anyone else so no actual functionality is being removed.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: cti: Initialize dynamic sysfs attributes
  coresight: Fix uninitialised pointer bug in etm_setup_aux()
  coresight: add module license
  misc: mic: remove the MIC drivers
  interconnect: qcom: use icc_sync state for sm8[12]50
  interconnect: qcom: Ensure that the floor bandwidth value is enforced
  interconnect: qcom: sc7180: Init BCMs before creating the nodes
  interconnect: qcom: sdm845: Init BCMs before creating the nodes
  interconnect: Aggregate before setting initial bandwidth
  interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
 "Here is one tiny debugfs change to fix up an API where the last user
  was successfully fixed up in 5.10-rc1 (so it couldn't be merged
  earlier), and a much larger Documentation/ABI/ update to the files so
  they can be automatically parsed by our tools.

  The Documentation/ABI/ updates are just formatting issues, small ones
  to bring the files into parsable format, and have been acked by
  numerous subsystem maintainers and the documentation maintainer. I
  figured it was good to get this into 5.10-rc2 to help wih the merge
  issues that would arise if these were to stick in linux-next until
  5.11-rc1.

  The debugfs change has been in linux-next for a long time, and the
  Documentation updates only for the last linux-next release"

* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
  scripts: get_abi.pl: assume ReST format by default
  docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
  docs: ABI: sysfs-class-backlight: unify ABI documentation
  docs: ABI: sysfs-c2port: remove a duplicated entry
  docs: ABI: sysfs-class-power: unify duplicated properties
  docs: ABI: unify /sys/class/leds/<led>/brightness documentation
  docs: ABI: stable: remove a duplicated documentation
  docs: ABI: change read/write attributes
  docs: ABI: cleanup several ABI documents
  docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
  docs: ABI: vdso: use the right format for ABI
  docs: ABI: fix syntax to be parsed using ReST notation
  docs: ABI: convert testing/configfs-acpi to ReST
  docs: Kconfig/Makefile: add a check for broken ABI files
  docs: abi-testing.rst: enable --rst-sources when building docs
  docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  docs: ABI: create a 2-depth index for ABI
  docs: ABI: make it parse ABI/stable as ReST-compatible files
  docs: ABI: sysfs-uevent: make it compatible with ReST output
  docs: ABI: testing: make the files compatible with ReST output
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for issues that have been
  reported in 5.10-rc1:

   - octeon driver fixes

   - wfx driver fixes

   - memory leak fix in vchiq driver

   - fieldbus driver bugfix

   - comedi driver bugfix

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fieldbus: anybuss: jump to correct label in an error path
  staging: wfx: fix test on return value of gpiod_get_value()
  staging: wfx: fix use of uninitialized pointer
  staging: mmal-vchiq: Fix memory leak for vchiq_instance
  staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice
  staging: octeon: Drop on uncorrectable alignment or FCS error
  staging: octeon: repair "fixed-link" support

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for reported issues
  for 5.10-rc2. They include:

   - vt ioctl bugfix for reported problems

   - fsl_lpuart serial driver fix

   - 21285 serial driver bugfix

  All have been in linux-next with no reported issues"

* tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt_ioctl: fix GIO_UNIMAP regression
  vt: keyboard, extend func_buf_lock to readers
  vt: keyboard, simplify vt_kdgkbsent
  tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A
  tty: serial: 21285: fix lockup on open

Pull USB driver fixes from Greg KH:
 "Here are a number of small bugfixes for reported issues in some USB
  drivers. They include:

   - typec bugfixes

   - xhci bugfixes and lockdep warning fixes

   - cdc-acm driver regression fix

   - kernel doc fixes

   - cdns3 driver bugfixes for a bunch of reported issues

   - other tiny USB driver fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdns3: gadget: own the lock wrongly at the suspend routine
  usb: cdns3: Fix on-chip memory overflow issue
  usb: cdns3: gadget: suspicious implicit sign extension
  xhci: Don't create stream debugfs files with spinlock held.
  usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC
  xhci: Fix sizeof() mismatch
  usb: typec: stusb160x: fix signedness comparison issue with enum variables
  usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x
  USB: apple-mfi-fastcharge: don't probe unhandled devices
  usbcore: Check both id_table and match() when both available
  usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()
  usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe
  usb: typec: tcpm: reset hard_reset_count for any disconnect
  usb: cdc-acm: fix cooldown mechanism
  usb: host: fsl-mph-dr-of: check return of dma_set_mask()
  usb: fix kernel-doc markups
  usb: typec: stusb160x: fix some signedness bugs
  usb: cdns3: Variable 'length' set but not used

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - selftest fix
   - force PTE mapping on device pages provided via VFIO
   - fix detection of cacheable mapping at S2
   - fallback to PMD/PTE mappings for composite huge pages
   - fix accounting of Stage-2 PGD allocation
   - fix AArch32 handling of some of the debug registers
   - simplify host HYP entry
   - fix stray pointer conversion on nVHE TLB invalidation
   - fix initialization of the nVHE code
   - simplify handling of capabilities exposed to HYP
   - nuke VCPUs caught using a forbidden AArch32 EL0

  x86:
   - new nested virtualization selftest
   - miscellaneous fixes
   - make W=1 fixes
   - reserve new CPUID bit in the KVM leaves"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: remove unused variable
  KVM: selftests: Don't require THP to run tests
  KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
  KVM: selftests: test behavior of unmapped L2 APIC-access address
  KVM: x86: Fix NULL dereference at kvm_msr_ignored_check()
  KVM: x86: replace static const variables with macros
  KVM: arm64: Handle Asymmetric AArch32 systems
  arm64: cpufeature: upgrade hyp caps to final
  arm64: cpufeature: reorder cpus_have_{const, final}_cap()
  KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code()
  KVM: arm64: Force PTE mapping on fault resulting in a device mapping
  KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes
  KVM: arm64: Fix masks in stage2_pte_cacheable()
  KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR
  KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT
  KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition
  KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation
  KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call
  x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID

Pull vhost fixes from Michael Tsirkin:
 "Fixes all over the place.

  A new UAPI is borderline: can also be considered a new feature but
  also seems to be the only way we could come up with to fix addressing
  for userspace - and it seems important to switch to it now before
  userspace making assumptions about addressing ability of devices is
  set in stone"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpasim: allow to assign a MAC address
  vdpasim: fix MAC address configuration
  vdpa: handle irq bypass register failure case
  vdpa_sim: Fix DMA mask
  Revert "vhost-vdpa: fix page pinning leakage in error path"
  vdpa/mlx5: Fix error return in map_direct_mr()
  vhost_vdpa: Return -EFAULT if copy_from_user() fails
  vdpa_sim: implement get_iova_range()
  vhost: vdpa: report iova range
  vdpa: introduce config op to get valid iova range

Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull more flexible-array member conversions from Gustavo A. R. Silva:
 "Replace zero-length arrays with flexible-array members"

* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  printk: ringbuffer: Replace zero-length array with flexible-array member
  net/smc: Replace zero-length array with flexible-array member
  net/mlx5: Replace zero-length array with flexible-array member
  mei: hw: Replace zero-length array with flexible-array member
  gve: Replace zero-length array with flexible-array member
  Bluetooth: btintel: Replace zero-length array with flexible-array member
  scsi: target: tcmu: Replace zero-length array with flexible-array member
  ima: Replace zero-length array with flexible-array member
  enetc: Replace zero-length array with flexible-array member
  fs: Replace zero-length array with flexible-array member
  Bluetooth: Replace zero-length array with flexible-array member
  params: Replace zero-length array with flexible-array member
  tracepoint: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
  mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
  dmaengine: ti-cppi5: Replace zero-length array with flexible-array member

Pull dma-mapping fix from Christoph Hellwig:
 "Fix an integer overflow on 32-bit platforms in the new DMA range code
  (Geert Uytterhoeven)"

* tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n

Pull SCSI fixes from James Bottomley:
 "Four driver fixes and one core fix.

  The core fix closes a race window where we could kick off a second
  asynchronous scan because the test and set of the variable preventing
  it isn't atomic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Stop using queue #0 always for v2 hw
  scsi: ibmvscsi: Fix potential race after loss of transport
  scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()
  scsi: qla2xxx: Return EBUSY on fcport deletion
  scsi: core: Don't start concurrent async scan on same host

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Unless we want to test with THP, then we shouldn't require it to be
configured by the host kernel. Unfortunately, even advising with
MADV_NOHUGEPAGE does require it, so check for THP first in order
to avoid madvise failing with EINVAL.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
nowadays despite the code checking 'enable_evmcs' static key looking
correct. Turns out, static key magic doesn't work in '__init' section
(and it is unclear when things changed) but setup_vmcs_config() is called
only once per CPU so we don't really need it to. Switch to checking
'enlightened_vmcs' instead, it is supposed to be in sync with
'enable_evmcs'.

Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
extra newline from it.
Reported-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a regression test for commit 671ddc70 ("KVM: nVMX: Don't leak
L1 MMIO regions to L2").

First, check to see that an L2 guest can be launched with a valid
APIC-access address that is backed by a page of L1 physical memory.

Next, set the APIC-access address to a (valid) L1 physical address
that is not backed by memory. KVM can't handle this situation, so
resuming L2 should result in a KVM exit for internal error
(emulation).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201026180922.3120555-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull block fixes from Jens Axboe:

 - null_blk zone fixes (Damien, Kanchan)

 - NVMe pull request from Christoph:
       - improve zone revalidation (Keith Busch)
       - gracefully handle zero length messages in nvme-rdma (zhenwei pi)
       - nvme-fc error handling fixes (James Smart)
       - nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)"

 - xsysace platform fixes (Andy)

 - scatterlist type cleanup (David)

 - blk-cgroup memory fixes (Gabriel)

 - nbd block size update fix (Ming)

 - Flush completion state fix (Ming)

 - bio_add_hw_page() iteration fix (Naohiro)

* tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
  blk-mq: mark flush request as IDLE in flush_end_io()
  lib/scatterlist: use consistent sg_copy_buffer() return type
  xsysace: use platform_get_resource() and platform_get_irq_optional()
  null_blk: Fix locking in zoned mode
  null_blk: Fix zone reset all tracing
  nbd: don't update block size after device is started
  block: advance iov_iter on bio_add_hw_page failure
  null_blk: synchronization fix for zoned device
  nvmet: fix a NULL pointer dereference when tracing the flush command
  nvme-fc: remove nvme_fc_terminate_io()
  nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery
  nvme-fc: remove err_work work item
  nvme-fc: track error_recovery while connecting
  nvme-rdma: handle unexpected nvme completion data length
  nvme: ignore zone validate errors on subsequent scans
  blk-cgroup: Pre-allocate tree node on blkg_conf_prep
  blk-cgroup: Fix memleak on error path