1. 19 Sep, 2019 14 commits
    • Xin Long's avatar
      tipc: add NULL pointer check before calling kfree_rcu · 9a459842
      Xin Long authored
      [ Upstream commit 42dec1db ]
      
      Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When
      tipc_nametbl_remove_publ returns NULL, the panic below happens:
      
         BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
         RIP: 0010:__call_rcu+0x1d/0x290
         Call Trace:
          <IRQ>
          tipc_publ_notify+0xa9/0x170 [tipc]
          tipc_node_write_unlock+0x8d/0x100 [tipc]
          tipc_node_link_down+0xae/0x1d0 [tipc]
          tipc_node_check_dest+0x3ea/0x8f0 [tipc]
          ? tipc_disc_rcv+0x2c7/0x430 [tipc]
          tipc_disc_rcv+0x2c7/0x430 [tipc]
          ? tipc_rcv+0x6bb/0xf20 [tipc]
          tipc_rcv+0x6bb/0xf20 [tipc]
          ? ip_route_input_slow+0x9cf/0xb10
          tipc_udp_recv+0x195/0x1e0 [tipc]
          ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
          udp_queue_rcv_skb+0x180/0x460
          udp_unicast_rcv_skb.isra.56+0x75/0x90
          __udp4_lib_rcv+0x4ce/0xb90
          ip_local_deliver_finish+0x11c/0x210
          ip_local_deliver+0x6b/0xe0
          ? ip_rcv_finish+0xa9/0x410
          ip_rcv+0x273/0x362
      
      Fixes: 97ede29e ("tipc: convert name table read-write lock to RCU")
      Reported-by: default avatarLi Shuang <shuali@redhat.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9a459842
    • Neal Cardwell's avatar
      tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR · 67fe3b94
      Neal Cardwell authored
      [ Upstream commit af38d07e ]
      
      Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
      TCP_ECN_QUEUE_CWR.
      
      Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about
      the behavior of data receivers, and deciding whether to reflect
      incoming IP ECN CE marks as outgoing TCP th->ece marks. The
      TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders,
      and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function
      is only called from tcp_undo_cwnd_reduction() by data senders during
      an undo, so it should zero the sender-side state,
      TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of
      incoming CE bits on incoming data packets just because outgoing
      packets were spuriously retransmitted.
      
      The bug has been reproduced with packetdrill to manifest in a scenario
      with RFC3168 ECN, with an incoming data packet with CE bit set and
      carrying a TCP timestamp value that causes cwnd undo. Before this fix,
      the IP CE bit was ignored and not reflected in the TCP ECE header bit,
      and sender sent a TCP CWR ('W') bit on the next outgoing data packet,
      even though the cwnd reduction had been undone.  After this fix, the
      sender properly reflects the CE bit and does not set the W bit.
      
      Note: the bug actually predates 2005 git history; this Fixes footer is
      chosen to be the oldest SHA1 I have tested (from Sep 2007) for which
      the patch applies cleanly (since before this commit the code was in a
      .h file).
      
      Fixes: bdf1ee5d ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      67fe3b94
    • Xin Long's avatar
      sctp: use transport pf_retrans in sctp_do_8_2_transport_strike · 7c34a292
      Xin Long authored
      [ Upstream commit 10eb56c5 ]
      
      Transport should use its own pf_retrans to do the error_count
      check, instead of asoc's. Otherwise, it's meaningless to make
      pf_retrans per transport.
      
      Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg")
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7c34a292
    • Christophe JAILLET's avatar
      sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' · 41b624ff
      Christophe JAILLET authored
      [ Upstream commit b456d724 ]
      
      The '.exit' functions from 'pernet_operations' structure should be marked
      as __net_exit, not __net_init.
      
      Fixes: 8e2d61e0 ("sctp: fix race on protocol/netns initialization")
      Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      41b624ff
    • Cong Wang's avatar
      sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero · a9e91767
      Cong Wang authored
      [ Upstream commit d4d6ec6d ]
      
      In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
      it would make no progress inside the loop in hhf_dequeue() thus
      kernel would get stuck.
      
      Fix this by checking this corner case in hhf_change().
      
      Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
      Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
      Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
      Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
      Cc: Jamal Hadi Salim <jhs@mojatatu.com>
      Cc: Jiri Pirko <jiri@resnulli.us>
      Cc: Terry Lam <vtlam@google.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a9e91767
    • Eric Dumazet's avatar
      net: sched: fix reordering issues · a7f46e18
      Eric Dumazet authored
      [ Upstream commit b88dd52c ]
      
      Whenever MQ is not used on a multiqueue device, we experience
      serious reordering problems. Bisection found the cited
      commit.
      
      The issue can be described this way :
      
      - A single qdisc hierarchy is shared by all transmit queues.
        (eg : tc qdisc replace dev eth0 root fq_codel)
      
      - When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting
        a different transmit queue than the one used to build a packet train,
        we stop building the current list and save the 'bad' skb (P1) in a
        special queue. (bad_txq)
      
      - When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this
        skb (P1), it checks if the associated transmit queues is still in frozen
        state. If the queue is still blocked (by BQL or NIC tx ring full),
        we leave the skb in bad_txq and return NULL.
      
      - dequeue_skb() calls q->dequeue() to get another packet (P2)
      
        The other packet can target the problematic queue (that we found
        in frozen state for the bad_txq packet), but another cpu just ran
        TX completion and made room in the txq that is now ready to accept
        new packets.
      
      - Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent
        at next round. In practice P2 is the lead of a big packet train
        (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/
      
      To solve this problem, we have to block the dequeue process as long
      as the first packet in bad_txq can not be sent. Reordering issues
      disappear and no side effects have been seen.
      
      Fixes: a53851e2 ("net: sched: explicit locking in gso_cpu fallback")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: John Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a7f46e18
    • Stefan Chulski's avatar
      net: phylink: Fix flow control resolution · 3600a311
      Stefan Chulski authored
      [ Upstream commit 63b2ed4e ]
      
      Regarding to IEEE 802.3-2015 standard section 2
      28B.3 Priority resolution - Table 28-3 - Pause resolution
      
      In case of Local device Pause=1 AsymDir=0, Link partner
      Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
      transmit, disable PAUSE receive.
      And in case of Local device Pause=1 AsymDir=1, Link partner
      Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
      receive, disable PAUSE transmit.
      
      Fixes: 9525ae83 ("phylink: add phylink infrastructure")
      Signed-off-by: default avatarStefan Chulski <stefanc@marvell.com>
      Reported-by: default avatarShaul Ben-Mayor <shaulb@marvell.com>
      Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3600a311
    • Shmulik Ladkani's avatar
      net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list · 821302dd
      Shmulik Ladkani authored
      [ Upstream commit 3dcbdb13 ]
      
      Historically, support for frag_list packets entering skb_segment() was
      limited to frag_list members terminating on exact same gso_size
      boundaries. This is verified with a BUG_ON since commit 89319d38
      ("net: Add frag_list support to skb_segment"), quote:
      
          As such we require all frag_list members terminate on exact MSS
          boundaries.  This is checked using BUG_ON.
          As there should only be one producer in the kernel of such packets,
          namely GRO, this requirement should not be difficult to maintain.
      
      However, since commit 6578171a ("bpf: add bpf_skb_change_proto helper"),
      the "exact MSS boundaries" assumption no longer holds:
      An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but
      leaves the frag_list members as originally merged by GRO with the
      original 'gso_size'. Example of such programs are bpf-based NAT46 or
      NAT64.
      
      This lead to a kernel BUG_ON for flows involving:
       - GRO generating a frag_list skb
       - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
       - skb_segment() of the skb
      
      See example BUG_ON reports in [0].
      
      In commit 13acc94e ("net: permit skb_segment on head_frag frag_list skb"),
      skb_segment() was modified to support the "gso_size mangling" case of
      a frag_list GRO'ed skb, but *only* for frag_list members having
      head_frag==true (having a page-fragment head).
      
      Alas, GRO packets having frag_list members with a linear kmalloced head
      (head_frag==false) still hit the BUG_ON.
      
      This commit adds support to skb_segment() for a 'head_skb' packet having
      a frag_list whose members are *non* head_frag, with gso_size mangled, by
      disabling SG and thus falling-back to copying the data from the given
      'head_skb' into the generated segmented skbs - as suggested by Willem de
      Bruijn [1].
      
      Since this approach involves the penalty of skb_copy_and_csum_bits()
      when building the segments, care was taken in order to enable this
      solution only when required:
       - untrusted gso_size, by testing SKB_GSO_DODGY is set
         (SKB_GSO_DODGY is set by any gso_size mangling functions in
          net/core/filter.c)
       - the frag_list is non empty, its item is a non head_frag, *and* the
         headlen of the given 'head_skb' does not match the gso_size.
      
      [0]
      https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
      https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/
      
      [1]
      https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/
      
      Fixes: 6578171a ("bpf: add bpf_skb_change_proto helper")
      Suggested-by: default avatarWillem de Bruijn <willemdebruijn.kernel@gmail.com>
      Cc: Daniel Borkmann <daniel@iogearbox.net>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Cc: Alexander Duyck <alexander.duyck@gmail.com>
      Signed-off-by: default avatarShmulik Ladkani <shmulik.ladkani@gmail.com>
      Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
      Reviewed-by: default avatarAlexander Duyck <alexander.h.duyck@linux.intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      821302dd
    • Subash Abhinov Kasiviswanathan's avatar
      net: Fix null de-reference of device refcount · 88a46756
      Subash Abhinov Kasiviswanathan authored
      [ Upstream commit 10cc514f ]
      
      In event of failure during register_netdevice, free_netdev is
      invoked immediately. free_netdev assumes that all the netdevice
      refcounts have been dropped prior to it being called and as a
      result frees and clears out the refcount pointer.
      
      However, this is not necessarily true as some of the operations
      in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
      invocation after a grace period. The IPv4 callback in_dev_rcu_put
      tries to access the refcount after free_netdev is called which
      leads to a null de-reference-
      
      44837.761523:   <6> Unable to handle kernel paging request at
                          virtual address 0000004a88287000
      44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
      44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
      44837.762393:   <2> Call trace:
      44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
      44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
      44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
      44837.762418:   <2>  kthread+0x118/0x128
      44837.762424:   <2>  ret_from_fork+0x10/0x1c
      
      Fix this by waiting for the completion of the call_rcu() in
      case of register_netdevice errors.
      
      Fixes: 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.")
      Cc: Sean Tranchetti <stranche@codeaurora.org>
      Signed-off-by: default avatarSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      88a46756
    • Steffen Klassert's avatar
      ixgbe: Fix secpath usage for IPsec TX offload. · b26f4892
      Steffen Klassert authored
      [ Upstream commit f39b683d ]
      
      The ixgbe driver currently does IPsec TX offloading
      based on an existing secpath. However, the secpath
      can also come from the RX side, in this case it is
      misinterpreted for TX offload and the packets are
      dropped with a "bad sa_idx" error. Fix this by using
      the xfrm_offload() function to test for TX offload.
      
      Fixes: 59259470 ("ixgbe: process the Tx ipsec offload")
      Reported-by: default avatarMichael Marley <michael@michaelmarley.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b26f4892
    • Eric Biggers's avatar
      isdn/capi: check message length in capi_write() · 2354e925
      Eric Biggers authored
      [ Upstream commit fe163e53 ]
      
      syzbot reported:
      
          BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
          CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
          Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
          Call Trace:
            __dump_stack lib/dump_stack.c:77 [inline]
            dump_stack+0x173/0x1d0 lib/dump_stack.c:113
            kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
            __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
            capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
            do_loop_readv_writev fs/read_write.c:703 [inline]
            do_iter_write+0x83e/0xd80 fs/read_write.c:961
            vfs_writev fs/read_write.c:1004 [inline]
            do_writev+0x397/0x840 fs/read_write.c:1039
            __do_sys_writev fs/read_write.c:1112 [inline]
            __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
            __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
            do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
            entry_SYSCALL_64_after_hwframe+0x63/0xe7
          [...]
      
      The problem is that capi_write() is reading past the end of the message.
      Fix it by checking the message's length in the needed places.
      
      Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com
      Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2354e925
    • Christophe JAILLET's avatar
      ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' · ea6ec671
      Christophe JAILLET authored
      [ Upstream commit d23dbc47 ]
      
      The '.exit' functions from 'pernet_operations' structure should be marked
      as __net_exit, not __net_init.
      
      Fixes: d862e546 ("net: ipv6: Implement /proc/net/icmp6.")
      Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ea6ec671
    • Bjørn Mork's avatar
      cdc_ether: fix rndis support for Mediatek based smartphones · a20c8e4a
      Bjørn Mork authored
      [ Upstream commit 4d7ffcf3 ]
      
      A Mediatek based smartphone owner reports problems with USB
      tethering in Linux.  The verbose USB listing shows a rndis_host
      interface pair (e0/01/03 + 10/00/00), but the driver fails to
      bind with
      
      [  355.960428] usb 1-4: bad CDC descriptors
      
      The problem is a failsafe test intended to filter out ACM serial
      functions using the same 02/02/ff class/subclass/protocol as RNDIS.
      The serial functions are recognized by their non-zero bmCapabilities.
      
      No RNDIS function with non-zero bmCapabilities were known at the time
      this failsafe was added. But it turns out that some Wireless class
      RNDIS functions are using the bmCapabilities field. These functions
      are uniquely identified as RNDIS by their class/subclass/protocol, so
      the failing test can safely be disabled.  The same applies to the two
      types of Misc class RNDIS functions.
      
      Applying the failsafe to Communication class functions only retains
      the original functionality, and fixes the problem for the Mediatek based
      smartphone.
      
      Tow examples of CDC functional descriptors with non-zero bmCapabilities
      from Wireless class RNDIS functions are:
      
      0e8d:000a  Mediatek Crosscall Spider X5 3G Phone
      
            CDC Header:
              bcdCDC               1.10
            CDC ACM:
              bmCapabilities       0x0f
                connection notifications
                sends break
                line coding and serial state
                get/set/clear comm features
            CDC Union:
              bMasterInterface        0
              bSlaveInterface         1
            CDC Call Management:
              bmCapabilities       0x03
                call management
                use DataInterface
              bDataInterface          1
      
      and
      
      19d2:1023  ZTE K4201-z
      
            CDC Header:
              bcdCDC               1.10
            CDC ACM:
              bmCapabilities       0x02
                line coding and serial state
            CDC Call Management:
              bmCapabilities       0x03
                call management
                use DataInterface
              bDataInterface          1
            CDC Union:
              bMasterInterface        0
              bSlaveInterface         1
      
      The Mediatek example is believed to apply to most smartphones with
      Mediatek firmware.  The ZTE example is most likely also part of a larger
      family of devices/firmwares.
      Suggested-by: default avatarLars Melin <larsm17@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a20c8e4a
    • Nicolas Dichtel's avatar
      bridge/mdb: remove wrong use of NLM_F_MULTI · f57fd58d
      Nicolas Dichtel authored
      [ Upstream commit 94a72b3f ]
      
      NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
      In fact, NLMSG_DONE is sent only at the end of a dump.
      
      Libraries like libnl will wait forever for NLMSG_DONE.
      
      Fixes: 949f1e39 ("bridge: mdb: notify on router port add and del")
      CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f57fd58d
  2. 16 Sep, 2019 26 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.73 · db2d0b7c
      Greg Kroah-Hartman authored
      db2d0b7c
    • yongduan's avatar
      vhost: make sure log_num < in_num · ba03ee62
      yongduan authored
      commit 060423bf upstream.
      
      The code assumes log_num < in_num everywhere, and that is true as long as
      in_num is incremented by descriptor iov count, and log_num by 1. However
      this breaks if there's a zero sized descriptor.
      
      As a result, if a malicious guest creates a vring desc with desc.len = 0,
      it may cause the host kernel to crash by overflowing the log array. This
      bug can be triggered during the VM migration.
      
      There's no need to log when desc.len = 0, so just don't increment log_num
      in this case.
      
      Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server")
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarLidong Chen <lidongchen@tencent.com>
      Signed-off-by: default avatarruippan <ruippan@tencent.com>
      Signed-off-by: default avataryongduan <yongduan@tencent.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Reviewed-by: default avatarTyler Hicks <tyhicks@canonical.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ba03ee62
    • Gustavo Romero's avatar
      powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts · 569775bd
      Gustavo Romero authored
      [ Upstream commit a8318c13 ]
      
      When in userspace and MSR FP=0 the hardware FP state is unrelated to
      the current process. This is extended for transactions where if tbegin
      is run with FP=0, the hardware checkpoint FP state will also be
      unrelated to the current process. Due to this, we need to ensure this
      hardware checkpoint is updated with the correct state before we enable
      FP for this process.
      
      Unfortunately we get this wrong when returning to a process from a
      hardware interrupt. A process that starts a transaction with FP=0 can
      take an interrupt. When the kernel returns back to that process, we
      change to FP=1 but with hardware checkpoint FP state not updated. If
      this transaction is then rolled back, the FP registers now contain the
      wrong state.
      
      The process looks like this:
         Userspace:                      Kernel
      
                     Start userspace
                      with MSR FP=0 TM=1
                        < -----
         ...
         tbegin
         bne
                     Hardware interrupt
                         ---- >
                                          <do_IRQ...>
                                          ....
                                          ret_from_except
                                            restore_math()
      				        /* sees FP=0 */
                                              restore_fp()
                                                tm_active_with_fp()
      					    /* sees FP=1 (Incorrect) */
                                                load_fp_state()
                                              FP = 0 -> 1
                        < -----
                     Return to userspace
                       with MSR TM=1 FP=1
                       with junk in the FP TM checkpoint
         TM rollback
         reads FP junk
      
      When returning from the hardware exception, tm_active_with_fp() is
      incorrectly making restore_fp() call load_fp_state() which is setting
      FP=1.
      
      The fix is to remove tm_active_with_fp().
      
      tm_active_with_fp() is attempting to handle the case where FP state
      has been changed inside a transaction. In this case the checkpointed
      and transactional FP state is different and hence we must restore the
      FP state (ie. we can't do lazy FP restore inside a transaction that's
      used FP). It's safe to remove tm_active_with_fp() as this case is
      handled by restore_tm_state(). restore_tm_state() detects if FP has
      been using inside a transaction and will set load_fp and call
      restore_math() to ensure the FP state (checkpoint and transaction) is
      restored.
      
      This is a data integrity problem for the current process as the FP
      registers are corrupted. It's also a security problem as the FP
      registers from one process may be leaked to another.
      
      Similarly for VMX.
      
      A simple testcase to replicate this will be posted to
      tools/testing/selftests/powerpc/tm/tm-poison.c
      
      This fixes CVE-2019-15031.
      
      Fixes: a7771176 ("powerpc: Don't enable FP/Altivec if not checkpointed")
      Cc: stable@vger.kernel.org # 4.15+
      Signed-off-by: default avatarGustavo Romero <gromero@linux.ibm.com>
      Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      569775bd
    • Breno Leitao's avatar
      powerpc/tm: Remove msr_tm_active() · 052bc385
      Breno Leitao authored
      [ Upstream commit 5c784c84 ]
      
      Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if
      CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that
      returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set.
      
      This function is not necessary, since MSR_TM_ACTIVE() just do the same and
      could be used, removing the dualism and simplifying the code.
      
      This patchset remove every instance of msr_tm_active() and replaced it
      by MSR_TM_ACTIVE().
      Signed-off-by: default avatarBreno Leitao <leitao@debian.org>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      052bc385
    • Lyude Paul's avatar
      PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround · f193e022
      Lyude Paul authored
      [ Upstream commit ad54567a ]
      
      quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around
      an apparent BIOS defect.  It previously used pci_reset_function(), and
      the available method was a bus reset, which was fine because there was
      only one function on the bus.  After b516ea58 ("PCI: Enable NVIDIA
      HDA controllers"), there are now two functions (the HDA controller and
      the GPU itself) on the bus, so the reset fails.
      
      Use pci_reset_bus() explicitly instead of pci_reset_function() since it's
      OK to reset both devices.
      
      [bhelgaas: commit log, add e0547c81]
      Fixes: b516ea58 ("PCI: Enable NVIDIA HDA controllers")
      Fixes: e0547c81 ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary")
      Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.comSigned-off-by: default avatarLyude Paul <lyude@redhat.com>
      Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      Acked-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Lukas Wunner <lukas@wunner.de>
      Cc: Daniel Drake <drake@endlessm.com>
      Cc: Aaron Plattner <aplattner@nvidia.com>
      Cc: Peter Wu <peter@lekensteyn.nl>
      Cc: Ilia Mirkin <imirkin@alum.mit.edu>
      Cc: Karol Herbst <kherbst@redhat.com>
      Cc: Maik Freudenberg <hhfeuer@gmx.de>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f193e022
    • Colin Ian King's avatar
      ext4: unsigned int compared against zero · ff693225
      Colin Ian King authored
      [ Upstream commit fbbbbd2f ]
      
      There are two cases where u32 variables n and err are being checked
      for less than zero error values, the checks is always false because
      the variables are not signed. Fix this by making the variables ints.
      
      Addresses-Coverity: ("Unsigned compared against 0")
      Fixes: 345c0dbf ("ext4: protect journal inode's blocks using block_validity")
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ff693225
    • Theodore Ts'o's avatar
      ext4: fix block validity checks for journal inodes using indirect blocks · 292666d2
      Theodore Ts'o authored
      [ Upstream commit 170417c8 ]
      
      Commit 345c0dbf ("ext4: protect journal inode's blocks using
      block_validity") failed to add an exception for the journal inode in
      ext4_check_blockref(), which is the function used by ext4_get_branch()
      for indirect blocks.  This caused attempts to read from the ext3-style
      journals to fail with:
      
      [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
      
      Fix this by adding the missing exception check.
      
      Fixes: 345c0dbf ("ext4: protect journal inode's blocks using block_validity")
      Reported-by: default avatarArthur Marsh <arthur.marsh@internode.on.net>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      292666d2
    • Theodore Ts'o's avatar
      ext4: don't perform block validity checks on the journal inode · 97fbf573
      Theodore Ts'o authored
      [ Upstream commit 0a944e8a ]
      
      Since the journal inode is already checked when we added it to the
      block validity's system zone, if we check it again, we'll just trigger
      a failure.
      
      This was causing failures like this:
      
      [   53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode
      #8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0)
      [   53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
      [   53.938480] Aborting journal on device sda-8.
      
      ... but only if the system was under enough memory pressure that
      logical->physical mapping for the journal inode gets pushed out of the
      extent cache.  (This is why it wasn't noticed earlier.)
      
      Fixes: 345c0dbf ("ext4: protect journal inode's blocks using block_validity")
      Reported-by: default avatarDan Rue <dan.rue@linaro.org>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Tested-by: default avatarNaresh Kamboju <naresh.kamboju@linaro.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      97fbf573
    • Lyude Paul's avatar
      drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors · 1e88a1f8
      Lyude Paul authored
      [ Upstream commit 34ca26a9 ]
      
      It appears when testing my previous fix for some of the legacy
      modesetting issues with MST, I misattributed some kernel splats that
      started appearing on my machine after a rebase as being from upstream.
      But it appears they actually came from my patch series:
      
      [    2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
      [    2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
      [    2.980516] ------------[ cut here ]------------
      [    2.980519] Could not determine valid watermarks for inherited state
      [    2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
      [    2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G           O      4.19.0-rc7Lyude-Test+ #1
      [    2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
      [    2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
      [    2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
      [    2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
      [    2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
      [    2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
      [    2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
      [    2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
      [    2.980630] FS:  00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
      [    2.980633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [    2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
      [    2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [    2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [    2.980645] Call Trace:
      [    2.980675]  i915_driver_load+0xb0e/0xdc0 [i915]
      [    2.980681]  ? kernfs_add_one+0xe7/0x130
      [    2.980709]  i915_pci_probe+0x46/0x60 [i915]
      [    2.980715]  pci_device_probe+0xd4/0x150
      [    2.980719]  really_probe+0x243/0x3b0
      [    2.980722]  driver_probe_device+0xba/0x100
      [    2.980726]  __driver_attach+0xe4/0x110
      [    2.980729]  ? driver_probe_device+0x100/0x100
      [    2.980733]  bus_for_each_dev+0x74/0xb0
      [    2.980736]  driver_attach+0x1e/0x20
      [    2.980739]  bus_add_driver+0x159/0x230
      [    2.980743]  ? 0xffffffffa0393000
      [    2.980746]  driver_register+0x70/0xc0
      [    2.980749]  ? 0xffffffffa0393000
      [    2.980753]  __pci_register_driver+0x57/0x60
      [    2.980780]  i915_init+0x55/0x58 [i915]
      [    2.980785]  do_one_initcall+0x4a/0x1c4
      [    2.980789]  ? do_init_module+0x27/0x210
      [    2.980793]  ? kmem_cache_alloc_trace+0x131/0x190
      [    2.980797]  do_init_module+0x60/0x210
      [    2.980800]  load_module+0x2063/0x22e0
      [    2.980804]  ? vfs_read+0x116/0x140
      [    2.980807]  ? vfs_read+0x116/0x140
      [    2.980811]  __do_sys_finit_module+0xbd/0x120
      [    2.980814]  ? __do_sys_finit_module+0xbd/0x120
      [    2.980818]  __x64_sys_finit_module+0x1a/0x20
      [    2.980821]  do_syscall_64+0x5a/0x110
      [    2.980824]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
      [    2.980826] RIP: 0033:0x7f4754e32879
      [    2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
      [    2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
      [    2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
      [    2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
      [    2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
      [    2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
      [    2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
      [    2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
      [    2.980884] ---[ end trace 5eb47a76277d4731 ]---
      
      The cause of this appears to be due to the fact that if there's
      pre-existing display state that was set by the BIOS when i915 loads, it
      will attempt to perform a modeset before the driver is registered with
      userspace. Since this happens before the driver's registered with
      userspace, it's connectors are also unregistered and thus-states which
      would turn on DPMS on a connector end up getting rejected since the
      connector isn't registered.
      
      These bugs managed to get past Intel's CI partially due to the fact it
      never ran a full test on my patches for some reason, but also because
      all of the tests unload the GPU once before running. Since this bug is
      only really triggered when the drivers tries to perform a modeset before
      it's been fully registered with userspace when coming from whatever
      display configuration the firmware left us with, it likely would never
      have been picked up by CI in the first place.
      
      After some discussion with vsyrjala, we decided the best course of
      action would be to just move the unregistered connector checks out of
      update_connector_routing() and into drm_atomic_set_crtc_for_connector().
      The reason for this being that legacy modesetting isn't going to be
      expecting failures anywhere (at least this is the case with X), so
      ideally we want to ensure that any DPMS changes will still work even on
      unregistered connectors. Instead, we now only reject new modesets which
      would change the current CRTC assigned to an unregistered connector
      unless no new CRTC is being assigned to replace the connector's previous
      one.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reported-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Fixes: 4d802739 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com
      (cherry picked from commit b5d29843)
      Fixes: e9655095 ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
      Signed-off-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      1e88a1f8
    • Halil Pasic's avatar
      virtio/s390: fix race on airq_areas[] · b1dd1d06
      Halil Pasic authored
      [ Upstream commit 4f419eb1 ]
      
      The access to airq_areas was racy ever since the adapter interrupts got
      introduced to virtio-ccw, but since commit 39c7dcb1 ("virtio/s390:
      make airq summary indicators DMA") this became an issue in practice as
      well. Namely before that commit the airq_info that got overwritten was
      still functional. After that commit however the two infos share a
      summary_indicator, which aggravates the situation. Which means
      auto-online mechanism occasionally hangs the boot with virtio_blk.
      Signed-off-by: default avatarHalil Pasic <pasic@linux.ibm.com>
      Reported-by: default avatarMarc Hartmayer <mhartmay@linux.ibm.com>
      Reviewed-by: default avatarCornelia Huck <cohuck@redhat.com>
      Cc: stable@vger.kernel.org
      Fixes: 96b14536 ("virtio-ccw: virtio-ccw adapter interrupt support.")
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b1dd1d06
    • Ville Syrjälä's avatar
      drm/i915: Make sure cdclk is high enough for DP audio on VLV/CHV · 057cdb6f
      Ville Syrjälä authored
      [ Upstream commit a8f196a0 ]
      
      On VLV/CHV there is some kind of linkage between the cdclk frequency
      and the DP link frequency. The spec says:
      "For DP audio configuration, cdclk frequency shall be set to
       meet the following requirements:
       DP Link Frequency(MHz) | Cdclk frequency(MHz)
       270                    | 320 or higher
       162                    | 200 or higher"
      
      I suspect that would more accurately be expressed as
      "cdclk >= DP link clock", and in any case we can express it like
      that in the code because of the limited set of cdclk (200, 266,
      320, 400 MHz) and link frequencies (162 and 270 MHz) we support.
      
      Without this we can end up in a situation where the cdclk
      is too low and enabling DP audio will kill the pipe. Happens
      eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
      to pump the pixels (241.5 MHz dotclock) but is too low for
      the DP audio due to the link frequency being 270 MHz.
      
      v2: Spell out the cdclk and link frequencies we actually support
      
      Cc: stable@vger.kernel.org
      Tested-by: default avatarStefan Gottwald <gottwald@igel.com>
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.comAcked-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      (cherry picked from commit bffb31f7)
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      057cdb6f
    • Coly Li's avatar
      bcache: fix race in btree_flush_write() · b113f984
      Coly Li authored
      [ Upstream commit 50a260e8 ]
      
      There is a race between mca_reap(), btree_node_free() and journal code
      btree_flush_write(), which results very rare and strange deadlock or
      panic and are very hard to reproduce.
      
      Let me explain how the race happens. In btree_flush_write() one btree
      node with oldest journal pin is selected, then it is flushed to cache
      device, the select-and-flush is a two steps operation. Between these two
      steps, there are something may happen inside the race window,
      - The selected btree node was reaped by mca_reap() and allocated to
        other requesters for other btree node.
      - The slected btree node was selected, flushed and released by mca
        shrink callback bch_mca_scan().
      When btree_flush_write() tries to flush the selected btree node, firstly
      b->write_lock is held by mutex_lock(). If the race happens and the
      memory of selected btree node is allocated to other btree node, if that
      btree node's write_lock is held already, a deadlock very probably
      happens here. A worse case is the memory of the selected btree node is
      released, then all references to this btree node (e.g. b->write_lock)
      will trigger NULL pointer deference panic.
      
      This race was introduced in commit cafe5635 ("bcache: A block layer
      cache"), and enlarged by commit c4dc2497 ("bcache: fix high CPU
      occupancy during journal"), which selected 128 btree nodes and flushed
      them one-by-one in a quite long time period.
      
      Such race is not easy to reproduce before. On a Lenovo SR650 server with
      48 Xeon cores, and configure 1 NVMe SSD as cache device, a MD raid0
      device assembled by 3 NVMe SSDs as backing device, this race can be
      observed around every 10,000 times btree_flush_write() gets called. Both
      deadlock and kernel panic all happened as aftermath of the race.
      
      The idea of the fix is to add a btree flag BTREE_NODE_journal_flush. It
      is set when selecting btree nodes, and cleared after btree nodes
      flushed. Then when mca_reap() selects a btree node with this bit set,
      this btree node will be skipped. Since mca_reap() only reaps btree node
      without BTREE_NODE_journal_flush flag, such race is avoided.
      
      Once corner case should be noticed, that is btree_node_free(). It might
      be called in some error handling code path. For example the following
      code piece from btree_split(),
              2149 err_free2:
              2150         bkey_put(b->c, &n2->key);
              2151         btree_node_free(n2);
              2152         rw_unlock(true, n2);
              2153 err_free1:
              2154         bkey_put(b->c, &n1->key);
              2155         btree_node_free(n1);
              2156         rw_unlock(true, n1);
      At line 2151 and 2155, the btree node n2 and n1 are released without
      mac_reap(), so BTREE_NODE_journal_flush also needs to be checked here.
      If btree_node_free() is called directly in such error handling path,
      and the selected btree node has BTREE_NODE_journal_flush bit set, just
      delay for 1 us and retry again. In this case this btree node won't
      be skipped, just retry until the BTREE_NODE_journal_flush bit cleared,
      and free the btree node memory.
      
      Fixes: cafe5635 ("bcache: A block layer cache")
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Reported-and-tested-by: default avatarkbuild test robot <lkp@intel.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b113f984
    • Coly Li's avatar
      bcache: add comments for mutex_lock(&b->write_lock) · f73c35d9
      Coly Li authored
      [ Upstream commit 41508bb7 ]
      
      When accessing or modifying BTREE_NODE_dirty bit, it is not always
      necessary to acquire b->write_lock. In bch_btree_cache_free() and
      mca_reap() acquiring b->write_lock is necessary, and this patch adds
      comments to explain why mutex_lock(&b->write_lock) is necessary for
      checking or clearing BTREE_NODE_dirty bit there.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f73c35d9
    • Coly Li's avatar
      bcache: only clear BTREE_NODE_dirty bit when it is set · 7989a502
      Coly Li authored
      [ Upstream commit e5ec5f47 ]
      
      In bch_btree_cache_free() and btree_node_free(), BTREE_NODE_dirty is
      always set no matter btree node is dirty or not. The code looks like
      this,
      	if (btree_node_dirty(b))
      		btree_complete_write(b, btree_current_write(b));
      	clear_bit(BTREE_NODE_dirty, &b->flags);
      
      Indeed if btree_node_dirty(b) returns false, it means BTREE_NODE_dirty
      bit is cleared, then it is unnecessary to clear the bit again.
      
      This patch only clears BTREE_NODE_dirty when btree_node_dirty(b) is
      true (the bit is set), to save a few CPU cycles.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      7989a502
    • Trond Myklebust's avatar
      NFSv4: Fix delegation state recovery · 652993a5
      Trond Myklebust authored
      [ Upstream commit 5eb8d18c ]
      
      Once we clear the NFS_DELEGATED_STATE flag, we're telling
      nfs_delegation_claim_opens() that we're done recovering all open state
      for that stateid, so we really need to ensure that we test for all
      open modes that are currently cached and recover them before exiting
      nfs4_open_delegation_recall().
      
      Fixes: 24311f88 ("NFSv4: Recovery of recalled read delegations...")
      Signed-off-by: default avatarTrond Myklebust <trond.myklebust@hammerspace.com>
      Cc: stable@vger.kernel.org # v4.3+
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      652993a5
    • Arnd Bergmann's avatar
      iio: adc: gyroadc: fix uninitialized return code · 5026932a
      Arnd Bergmann authored
      [ Upstream commit 90c6260c ]
      
      gcc-9 complains about a blatant uninitialized variable use that
      all earlier compiler versions missed:
      
      drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
      
      Return -EINVAL instead here and a few lines above it where
      we accidentally return 0 on failure.
      
      Cc: stable@vger.kernel.org
      Fixes: 059c53b3 ("iio: adc: Add Renesas GyroADC driver")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
      Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5026932a
    • Ralph Campbell's avatar
      mm/migrate.c: initialize pud_entry in migrate_vma() · 2e7e7c8f
      Ralph Campbell authored
      [ Upstream commit 7b358c6f ]
      
      When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls
      migrate_vma_collect() which initializes a struct mm_walk but didn't
      initialize mm_walk.pud_entry.  (Found by code inspection) Use a C
      structure initialization to make sure it is set to NULL.
      
      Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com
      Fixes: 8763cb45 ("mm/migrate: new memory migration helper for use with device memory")
      Signed-off-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarJohn Hubbard <jhubbard@nvidia.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: "Jérôme Glisse" <jglisse@redhat.com>
      Cc: Mel Gorman <mgorman@techsingularity.net>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2e7e7c8f
    • Michał Mirosław's avatar
      i2c: at91: fix clk_offset for sama5d2 · b8ad18a1
      Michał Mirosław authored
      [ Upstream commit b1ac6704 ]
      
      In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
      offset of 3 cycles (compared to 4 in eg. SAMA5D3).
      
      Cc: stable@vger.kernel.org # 5.2.x
      [needs applying to i2c-at91.c instead for earlier kernels]
      Fixes: 0ef6f321 ("i2c: at91: add support for new alternative command mode")
      Signed-off-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
      Acked-by: default avatarLudovic Desroches <ludovic.desroches@microchip.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b8ad18a1
    • Michał Mirosław's avatar
      i2c: at91: disable TXRDY interrupt after sending data · 4c9170b5
      Michał Mirosław authored
      [ Upstream commit d12e3aae ]
      
      Driver was not disabling TXRDY interrupt after last TX byte.
      This caused interrupt storm until transfer timeouts for slow
      or broken device on the bus. The patch fixes the interrupt storm
      on my SAMA5D2-based board.
      
      Cc: stable@vger.kernel.org # 5.2.x
      [v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
      Fixes: fac368a0 ("i2c: at91: add new driver")
      Signed-off-by: default avatarMichał Mirosław <mirq-linux@rere.qmqm.pl>
      Acked-by: default avatarLudovic Desroches <ludovic.desroches@microchip.com>
      Tested-by: default avatarRaag Jadav <raagjadav@gmail.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4c9170b5
    • Bartosz Golaszewski's avatar
      gpio: don't WARN() on NULL descs if gpiolib is disabled · c9c90711
      Bartosz Golaszewski authored
      [ Upstream commit ffe0bbab ]
      
      If gpiolib is disabled, we use the inline stubs from gpio/consumer.h
      instead of regular definitions of GPIO API. The stubs for 'optional'
      variants of gpiod_get routines return NULL in this case as if the
      relevant GPIO wasn't found. This is correct so far.
      
      Calling other (non-gpio_get) stubs from this header triggers a warning
      because the GPIO descriptor couldn't have been requested. The warning
      however is unconditional (WARN_ON(1)) and is emitted even if the passed
      descriptor pointer is NULL.
      
      We don't want to force the users of 'optional' gpio_get to check the
      returned pointer before calling e.g. gpiod_set_value() so let's only
      WARN on non-NULL descriptors.
      
      Cc: stable@vger.kernel.org
      Reported-by: default avatarClaus H. Stovgaard <cst@phaseone.com>
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      c9c90711
    • Chris Wilson's avatar
      iommu/iova: Remove stale cached32_node · a532a120
      Chris Wilson authored
      [ Upstream commit 9eed17d3 ]
      
      Since the cached32_node is allowed to be advanced above dma_32bit_pfn
      (to provide a shortcut into the limited range), we need to be careful to
      remove the to be freed node if it is the cached32_node.
      
      [   48.477773] BUG: KASAN: use-after-free in __cached_rbnode_delete_update+0x68/0x110
      [   48.477812] Read of size 8 at addr ffff88870fc19020 by task kworker/u8:1/37
      [   48.477843]
      [   48.477879] CPU: 1 PID: 37 Comm: kworker/u8:1 Tainted: G     U            5.2.0+ #735
      [   48.477915] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
      [   48.478047] Workqueue: i915 __i915_gem_free_work [i915]
      [   48.478075] Call Trace:
      [   48.478111]  dump_stack+0x5b/0x90
      [   48.478137]  print_address_description+0x67/0x237
      [   48.478178]  ? __cached_rbnode_delete_update+0x68/0x110
      [   48.478212]  __kasan_report.cold.3+0x1c/0x38
      [   48.478240]  ? __cached_rbnode_delete_update+0x68/0x110
      [   48.478280]  ? __cached_rbnode_delete_update+0x68/0x110
      [   48.478308]  __cached_rbnode_delete_update+0x68/0x110
      [   48.478344]  private_free_iova+0x2b/0x60
      [   48.478378]  iova_magazine_free_pfns+0x46/0xa0
      [   48.478403]  free_iova_fast+0x277/0x340
      [   48.478443]  fq_ring_free+0x15a/0x1a0
      [   48.478473]  queue_iova+0x19c/0x1f0
      [   48.478597]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
      [   48.478712]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
      [   48.478826]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
      [   48.478940]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
      [   48.479053]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
      [   48.479081]  ? __sg_free_table+0x9e/0xf0
      [   48.479116]  ? kfree+0x7f/0x150
      [   48.479234]  i915_vma_unbind+0x1e2/0x240 [i915]
      [   48.479352]  i915_vma_destroy+0x3a/0x280 [i915]
      [   48.479465]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
      [   48.479579]  __i915_gem_free_work+0x41/0xa0 [i915]
      [   48.479607]  process_one_work+0x495/0x710
      [   48.479642]  worker_thread+0x4c7/0x6f0
      [   48.479687]  ? process_one_work+0x710/0x710
      [   48.479724]  kthread+0x1b2/0x1d0
      [   48.479774]  ? kthread_create_worker_on_cpu+0xa0/0xa0
      [   48.479820]  ret_from_fork+0x1f/0x30
      [   48.479864]
      [   48.479907] Allocated by task 631:
      [   48.479944]  save_stack+0x19/0x80
      [   48.479994]  __kasan_kmalloc.constprop.6+0xc1/0xd0
      [   48.480038]  kmem_cache_alloc+0x91/0xf0
      [   48.480082]  alloc_iova+0x2b/0x1e0
      [   48.480125]  alloc_iova_fast+0x58/0x376
      [   48.480166]  intel_alloc_iova+0x90/0xc0
      [   48.480214]  intel_map_sg+0xde/0x1f0
      [   48.480343]  i915_gem_gtt_prepare_pages+0xb8/0x170 [i915]
      [   48.480465]  huge_get_pages+0x232/0x2b0 [i915]
      [   48.480590]  ____i915_gem_object_get_pages+0x40/0xb0 [i915]
      [   48.480712]  __i915_gem_object_get_pages+0x90/0xa0 [i915]
      [   48.480834]  i915_gem_object_prepare_write+0x2d6/0x330 [i915]
      [   48.480955]  create_test_object.isra.54+0x1a9/0x3e0 [i915]
      [   48.481075]  igt_shared_ctx_exec+0x365/0x3c0 [i915]
      [   48.481210]  __i915_subtests.cold.4+0x30/0x92 [i915]
      [   48.481341]  __run_selftests.cold.3+0xa9/0x119 [i915]
      [   48.481466]  i915_live_selftests+0x3c/0x70 [i915]
      [   48.481583]  i915_pci_probe+0xe7/0x220 [i915]
      [   48.481620]  pci_device_probe+0xe0/0x180
      [   48.481665]  really_probe+0x163/0x4e0
      [   48.481710]  device_driver_attach+0x85/0x90
      [   48.481750]  __driver_attach+0xa5/0x180
      [   48.481796]  bus_for_each_dev+0xda/0x130
      [   48.481831]  bus_add_driver+0x205/0x2e0
      [   48.481882]  driver_register+0xca/0x140
      [   48.481927]  do_one_initcall+0x6c/0x1af
      [   48.481970]  do_init_module+0x106/0x350
      [   48.482010]  load_module+0x3d2c/0x3ea0
      [   48.482058]  __do_sys_finit_module+0x110/0x180
      [   48.482102]  do_syscall_64+0x62/0x1f0
      [   48.482147]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
      [   48.482190]
      [   48.482224] Freed by task 37:
      [   48.482273]  save_stack+0x19/0x80
      [   48.482318]  __kasan_slab_free+0x12e/0x180
      [   48.482363]  kmem_cache_free+0x70/0x140
      [   48.482406]  __free_iova+0x1d/0x30
      [   48.482445]  fq_ring_free+0x15a/0x1a0
      [   48.482490]  queue_iova+0x19c/0x1f0
      [   48.482624]  cleanup_page_dma.isra.64+0x62/0xb0 [i915]
      [   48.482749]  __gen8_ppgtt_cleanup+0x63/0x80 [i915]
      [   48.482873]  __gen8_ppgtt_cleanup+0x42/0x80 [i915]
      [   48.482999]  __gen8_ppgtt_clear+0x433/0x4b0 [i915]
      [   48.483123]  __gen8_ppgtt_clear+0x462/0x4b0 [i915]
      [   48.483250]  i915_vma_unbind+0x1e2/0x240 [i915]
      [   48.483378]  i915_vma_destroy+0x3a/0x280 [i915]
      [   48.483500]  __i915_gem_free_objects+0xf0/0x2d0 [i915]
      [   48.483622]  __i915_gem_free_work+0x41/0xa0 [i915]
      [   48.483659]  process_one_work+0x495/0x710
      [   48.483704]  worker_thread+0x4c7/0x6f0
      [   48.483748]  kthread+0x1b2/0x1d0
      [   48.483787]  ret_from_fork+0x1f/0x30
      [   48.483831]
      [   48.483868] The buggy address belongs to the object at ffff88870fc19000
      [   48.483868]  which belongs to the cache iommu_iova of size 40
      [   48.483920] The buggy address is located 32 bytes inside of
      [   48.483920]  40-byte region [ffff88870fc19000, ffff88870fc19028)
      [   48.483964] The buggy address belongs to the page:
      [   48.484006] page:ffffea001c3f0600 refcount:1 mapcount:0 mapping:ffff8888181a91c0 index:0x0 compound_mapcount: 0
      [   48.484045] flags: 0x8000000000010200(slab|head)
      [   48.484096] raw: 8000000000010200 ffffea001c421a08 ffffea001c447e88 ffff8888181a91c0
      [   48.484141] raw: 0000000000000000 0000000000120012 00000001ffffffff 0000000000000000
      [   48.484188] page dumped because: kasan: bad access detected
      [   48.484230]
      [   48.484265] Memory state around the buggy address:
      [   48.484314]  ffff88870fc18f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [   48.484361]  ffff88870fc18f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [   48.484406] >ffff88870fc19000: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
      [   48.484451]                                ^
      [   48.484494]  ffff88870fc19080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [   48.484530]  ffff88870fc19100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108602
      Fixes: e60aa7b5 ("iommu/iova: Extend rbtree node caching")
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: Robin Murphy <robin.murphy@arm.com>
      Cc: Joerg Roedel <jroedel@suse.de>
      Cc: Joerg Roedel <joro@8bytes.org>
      Cc: <stable@vger.kernel.org> # v4.15+
      Reviewed-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      a532a120
    • Suraj Jitindar Singh's avatar
      powerpc/mm: Limit rma_size to 1TB when running without HV mode · c4fc7cb9
      Suraj Jitindar Singh authored
      [ Upstream commit da0ef933 ]
      
      The virtual real mode addressing (VRMA) mechanism is used when a
      partition is using HPT (Hash Page Table) translation and performs real
      mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode
      effective address bits 0:23 are treated as zero (i.e. the access is
      aliased to 0) and the access is performed using an implicit 1TB SLB
      entry.
      
      The size of the RMA (Real Memory Area) is communicated to the guest as
      the size of the first memory region in the device tree. And because of
      the mechanism described above can be expected to not exceed 1TB. In
      the event that the host erroneously represents the RMA as being larger
      than 1TB, guest accesses in real mode to memory addresses above 1TB
      will be aliased down to below 1TB. This means that a memory access
      performed in real mode may differ to one performed in virtual mode for
      the same memory address, which would likely have unintended
      consequences.
      
      To avoid this outcome have the guest explicitly limit the size of the
      RMA to the current maximum, which is 1TB. This means that even if the
      first memory block is larger than 1TB, only the first 1TB should be
      accessed in real mode.
      
      Fixes: c610d65c ("powerpc/pseries: lift RTAS limit for hash")
      Cc: stable@vger.kernel.org # v4.16+
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Tested-by: default avatarSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
      Reviewed-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Link: https://lore.kernel.org/r/20190710052018.14628-1-sjitindarsingh@gmail.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      c4fc7cb9
    • Takashi Iwai's avatar
      ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips · 5b9a6ba9
      Takashi Iwai authored
      [ Upstream commit 2756d914 ]
      
      It turned out that the recent Intel HD-audio controller chips show a
      significant stall during the system PM resume intermittently.  It
      doesn't happen so often and usually it may read back successfully
      after one or more seconds, but in some rare worst cases the driver
      went into fallback mode.
      
      After trial-and-error, we found out that the communication stall seems
      covered by issuing the sync after each verb write, as already done for
      AMD and other chipsets.  So this patch enables the write-sync flag for
      the recent Intel chips, Skylake and onward, as a workaround.
      
      Also, since Broxton and co have the very same driver flags as Skylake,
      refer to the Skylake driver flags instead of defining the same
      contents again for simplification.
      
      BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901Reported-and-tested-by: default avatarTodd Brandt <todd.e.brandt@linux.intel.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5b9a6ba9
    • Sébastien Szymanski's avatar
      drm/panel: Add support for Armadeus ST0700 Adapt · 87c36921
      Sébastien Szymanski authored
      [ Upstream commit c479450f ]
      
      This patch adds support for the Armadeus ST0700 Adapt. It comes with a
      Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
      that it can be connected on the TFT header of Armadeus Dev boards.
      
      Cc: stable@vger.kernel.org # v4.19
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarSébastien Szymanski <sebastien.szymanski@armadeus.com>
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190507152713.27494-1-sebastien.szymanski@armadeus.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      87c36921
    • Mike Snitzer's avatar
      dm thin metadata: check if in fail_io mode when setting needs_check · ecf99cde
      Mike Snitzer authored
      [ Upstream commit 54fa16ee ]
      
      Check if in fail_io mode at start of dm_pool_metadata_set_needs_check().
      Otherwise dm_pool_metadata_set_needs_check()'s superblock_lock() can
      crash in dm_bm_write_lock() while accessing the block manager object
      that was previously destroyed as part of a failed
      dm_pool_abort_metadata() that ultimately set fail_io to begin with.
      
      Also, update DMERR() message to more accurately describe
      superblock_lock() failure.
      
      Cc: stable@vger.kernel.org
      Reported-by: default avatarZdenek Kabelac <zkabelac@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ecf99cde
    • Norbert Manthey's avatar
      pstore: Fix double-free in pstore_mkfile() failure path · 5e9a2ce6
      Norbert Manthey authored
      [ Upstream commit 4c6d80e1 ]
      
      The pstore_mkfile() function is passed a pointer to a struct
      pstore_record. On success it consumes this 'record' pointer and
      references it from the created inode.
      
      On failure, however, it may or may not free the record. There are even
      two different code paths which return -ENOMEM -- one of which does and
      the other doesn't free the record.
      
      Make the behaviour deterministic by never consuming and freeing the
      record when returning failure, allowing the caller to do the cleanup
      consistently.
      Signed-off-by: default avatarNorbert Manthey <nmanthey@amazon.de>
      Link: https://lore.kernel.org/r/1562331960-26198-1-git-send-email-nmanthey@amazon.de
      Fixes: 83f70f07 ("pstore: Do not duplicate record metadata")
      Fixes: 1dfff7dd ("pstore: Pass record contents instead of copying")
      Cc: stable@vger.kernel.org
      [kees: also move "private" allocation location, rename inode cleanup label]
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5e9a2ce6