Pull RCU updates from Ingo Molnar:

 - Support for "N" as alias for last bit in bitmap parsing library (eg
   using syntax like "nohz_full=2-N")

 - kvfree_rcu updates

 - mm_dump_obj() updates. (One of these is to mm, but was suggested by
   Andrew Morton.)

 - RCU callback offloading update

 - Polling RCU grace-period interfaces

 - Realtime-related RCU updates

 - Tasks-RCU updates

 - Torture-test updates

 - Torture-test scripting updates

 - Miscellaneous fixes

* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
  rcu: Provide polling interfaces for Tiny RCU grace periods
  torture: Fix kvm.sh --datestamp regex check
  torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
  torture: Print proper vmlinux path for kvm-again.sh runs
  torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
  torture: Make kvm-transform.sh update jitter commands
  torture: Add --duration argument to kvm-again.sh
  torture: Add kvm-again.sh to rerun a previous torture-test
  torture: Create a "batches" file for build reuse
  torture: De-capitalize TORTURE_SUITE
  torture: Make upper-case-only no-dot no-slash scenario names official
  torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
  torture: Remove no-mpstat error message
  torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
  torture: Record jitter start/stop commands
  torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
  torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
  torture: Abstract jitter.sh start/stop into scripts
  rcu: Provide polling interfaces for Tree RCU grace periods
  ...

Pull drm updates from Dave Airlie:
 "The usual lots of work all over the place.

  i915 has gotten some Alderlake work and prelim DG1 code, along with a
  major locking rework over the GEM code, and brings back the property
  of timing out long running jobs using a watchdog. amdgpu has some
  Alderbran support (new GPU), freesync HDMI support along with a lot
  other fixes.

  Outside of the drm, there is a new printf specifier added which should
  have all the correct acks/sobs:

   - printk fourcc modifier support added %p4cc

  Summary:

  core:
   - drm_crtc_commit_wait
   - atomic plane state helpers reworked for full state
   - dma-buf heaps API rework
   - edid: rework and improvements for displayid

  dp-mst:
   - better topology logging

  bridge:
   - Chipone ICN6211
   - Lontium LT8912B
   - anx7625 regulator support

  panel:
   - fix lt9611 4k panels handling

  simple-kms:
   - add plane state helpers

  ttm:
   - debugfs support
   - removal of unused sysfs
   - ignore signaled moved fences
   - ioremap buffer according to mem caching

  i915:
   - Alderlake S enablement
   - Conversion to dma_resv_locking
   - Bring back watchdog timeout support
   - legacy ioctl cleanups
   - add GEM TDDO and RFC process
   - DG1 LMEM preparation work
   - intel_display.c refactoring
   - Gen9/TGL PCH combination support
   - eDP MSO Support
   - multiple PSR instance support
   - Link training debug updates
   - Disable PSR2 support on JSL/EHL
   - DDR5/LPDDR5 support for bw calcs
   - LSPCON limited to gen9/10 platforms
   - HSW/BDW async flip/VTd corruption workaround
   - SAGV watermark fixes
   - SNB hard hang on ring resume fix
   - Limit imported dma-buf size
   - move to use new tasklet API
   - refactor KBL/TGL/ADL-S display/gt steppings
   - refactoring legacy DP/HDMI, FB plane code out

  amdgpu:
   - uapi: add ioctl to query video capabilities
   - Iniital AMD Freesync HDMI support
   - Initial Adebaran support
   - 10bpc dithering improvements
   - DCN secure display support
   - Drop legacy IO BAR requirements
   - PCIE/S0ix/RAS/Prime/Reset fixes
   - Display ASSR support
   - SMU gfx busy queues for RV/PCO
   - Initial LTTPR display work

  amdkfd:
   - MMU notifier fixes
   - APU fixes

  radeon:
   - debugfs cleanps
   - fw error handling ifix
   - Flexible array cleanups

  msm:
   - big DSI phy/pll cleanup
   - sc7280 initial support
   - commong bandwidth scaling path
   - shrinker locking contention fixes
   - unpin/swap support for GEM objcets

  ast:
   - cursor plane handling reworked

  tegra:
   - don't register DP AUX channels before connectors

  zynqmp:
   - fix OOB struct padding memset

  gma500:
   - drop ttm and medfield support

  exynos:
   - request_irq cleanup function

  mediatek:
   - fine tune line time for EOTp
   - MT8192 dpi support
   - atomic crtc config updates
   - don't support HDMI connector creation

  mxsdb:
   - imx8mm support

  panfrost:
   - MMU IRQ handling rework

  qxl:
   - locking fixes
   - resource deallocation changes

  sun4i:
   - add alpha properties to UI/VI layers

  vc4:
   - RPi4 CEC support

  vmwgfx:
   - doc cleanups

  arc:
   - moved to drm/tiny"

* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
  drm/ttm: Don't count pages in SG BOs against pages_limit
  drm/ttm: fix return value check
  drm/bridge: lt8912b: fix incorrect handling of of_* return values
  drm: bridge: fix LONTIUM use of mipi_dsi_() functions
  drm: bridge: fix ANX7625 use of mipi_dsi_() functions
  drm/amdgpu: page retire over debugfs mechanism
  drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
  drm/amd/display: Fix the Wunused-function warning
  drm/radeon/r600: Fix variables that are not used after assignment
  drm/amdgpu/smu7: fix CAC setting on TOPAZ
  drm/amd/display: Update DCN302 SR Exit Latency
  drm/amdgpu: enable ras eeprom on aldebaran
  drm/amdgpu: RAS harvest on driver load
  drm/amdgpu: add ras aldebaran ras eeprom driver
  drm/amd/pm: increase time out value when sending msg to SMU
  drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
  drm/amd/pm: add the callback to get vbios bootup values for vangogh
  drm/radeon: Fix size overflow
  drm/amdgpu: Fix size overflow
  drm/amdgpu: move mmhub ras_func init to ip specific file
  ...

Pull media updates from Mauro Carvalho Chehab:

 - addition of a maintainer's profile for the media subsystem

 - addition of i.MX8 IP support

 - qcom/camss gained support for hardware version Titan 170

 - new RC keymaps

 - Lots of other improvements, cleanups and bug fixes

* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
  media: coda: fix macroblocks count control usage
  media: rkisp1: params: fix wrong bits settings
  media: cedrus: Fix H265 status definitions
  media: meson-ge2d: fix rotation parameters
  media: v4l2-ctrls: fix reference to freed memory
  media: venus : hfi: add venus image info into smem
  media: venus: Fix internal buffer size calculations for v6.
  media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
  media: venus: fix hw overload error log condition
  media: venus: core: correct firmware name for sm8250
  media: venus: core,pm: fix potential infinite loop
  media: venus: core: Fix kerneldoc warnings
  media: gscpa/stv06xx: fix memory leak
  media: cx25821: remove unused including <linux/version.h>
  media: staging: media/meson: remove redundant dev_err call
  media: adv7842: support 1 block EDIDs, fix clearing EDID
  media: adv7842: configure all pads
  media: allegro: change kernel-doc comment blocks to normal comments
  media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
  media: i2c: rdamc21: Fix warning on u8 cast
  ...

Pull security layer fixes from James Morris:
 "Miscellaneous minor fixes"

* tag 'fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: commoncap: clean up kernel-doc comments
  security: commoncap: fix -Wstringop-overread warning

Merge tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several fixes and a new feature to support failure from dynamic
  analysis tools such as UBSAN and fake ops for testing.

   - a fake ops struct for testing a "free" function to complain if it
     was called with an invalid argument, or caught a double-free. Most
     return void and have no normal means of signalling failure (e.g.
     super_operations, iommu_ops, etc.)"

* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: add tips for using current->kunit_test
  kunit: fix -Wunused-function warning for __kunit_fail_current_test
  kunit: support failure from dynamic analysis tools
  kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
  kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
  kunit: Match parenthesis alignment to improve code readability

Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre

 - fixes to Kselftest documentation, framework

 - minor spelling correction in timers test

* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests/resctrl: Change a few printed messages
  Documentation: kselftest: fix path to test module files
  selftests/resctrl: Create .gitignore to include resctrl_tests
  selftests/resctrl: Fix checking for < 0 for unsigned values
  selftests/resctrl: Fix incorrect parsing of iMC counters
  selftests/resctrl: Fix unmount resctrl FS
  selftests/resctrl: Skip the test if requested resctrl feature is not supported
  selftests/resctrl: Modularize resctrl test suite main() function
  selftests/resctrl: Don't hard code value of "no_of_bits" variable
  selftests/resctrl: Fix MBA/MBM results reporting format
  selftests/resctrl: Use resctrl/info for feature detection
  selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
  selftests/resctrl: Add config dependencies
  selftests/resctrl: Fix a printed message
  selftests/resctrl: Share show_cache_info() by CAT and CMT tests
  selftests/resctrl: Call kselftest APIs to log test results
  selftests/resctrl: Rename CQM test as CMT test
  selftests/resctrl: Fix missing options "-n" and "-p"
  selftests/resctrl: Ensure sibling CPU is not same as original CPU
  selftests/resctrl: Clean up resctrl features check
  ...

Pull cgroup changes from Tejun Heo:
 "The only notable change is Vipin's new misc cgroup controller.

  This implements generic support for resources which can be controlled
  by simply counting and limiting the number of resource instances - ie
  there's X number of these on the system and this cgroup subtree can
  have upto Y of those.

  The first user is the address space IDs used for virtual machine
  memory encryption and expected future usages are similar - niche
  hardware features with concrete resource limits and simple usage
  models"

* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
  cgroup/cpuset: fix typos in comments
  cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
  svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
  cgroup: Miscellaneous cgroup documentation.
  cgroup: Add misc cgroup controller

Merge tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Use TIF_NOTIFY_SIGNAL infrastructure instead of the fake signal

* tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructure

Pull printk updates from Petr Mladek:

 - Stop synchronizing kernel log buffer readers by logbuf_lock. As a
   result, the access to the buffer is fully lockless now.

   Note that printk() itself still uses locks because it tries to flush
   the messages to the console immediately. Also the per-CPU temporary
   buffers are still there because they prevent infinite recursion and
   serialize backtraces from NMI. All this is going to change in the
   future.

 - kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
   removal.

 - Make bstr_printf() aware that %pf and %pF formats could deference the
   given pointer.

 - Show also page flags by %pGp format.

 - Clarify the documentation for plain pointer printing.

 - Do not show no_hash_pointers warning multiple times.

 - Update Senozhatsky email address.

 - Some clean up.

* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
  lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
  printk: clarify the documentation for plain pointer printing
  kernel/printk.c: Fixed mundane typos
  printk: rename vprintk_func to vprintk
  vsprintf: dump full information of page flags in pGp
  mm, slub: don't combine pr_err with INFO
  mm, slub: use pGp to print page flags
  MAINTAINERS: update Senozhatsky email address
  lib/vsprintf: do not show no_hash_pointers message multiple times
  printk: console: remove unnecessary safe buffer usage
  printk: kmsg_dump: remove _nolock() variants
  printk: remove logbuf_lock
  printk: introduce a kmsg_dump iterator
  printk: kmsg_dumper: remove @active field
  printk: add syslog_lock
  printk: use atomic64_t for devkmsg_user.seq
  printk: use seqcount_latch for clear_seq
  printk: introduce CONSOLE_LOG_MAX
  printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
  printk: refactor kmsg_dump_get_buffer()
  ...

Pull kgdb updates from Daniel Thompson:
 "Exclusively tidy ups this cycle. Most of them are thanks to Sumit Garg
  and, as it happens, the clean ups do result in a slight increase in
  the line count. This is due to registering kdb commands using data
  structures rather than function calls which, in turn, simplifies the
  memory management during command registration.

  In addition to changes to command registration we also have some dead
  code removal, a clearer implementation of environment variable
  handling and a typo fix"

* tag 'kgdb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Refactor env variables get/set code
  kernel: debug: Ordinary typo fixes in the file gdbstub.c
  kdb: Simplify kdb commands registration
  kdb: Remove redundant function definitions/prototypes

Pull s390 updates from Heiko Carstens:

 - fix buffer size for in-kernel disassembler for ebpf programs.

 - fix two memory leaks in zcrypt driver.

 - expose PCI device UID as index, including an indicator if the uid is
   unique.

 - remove some oprofile leftovers.

 - improve stack unwinder tests.

 - don't use gcc atomic builtins anymore, just like all other
   architectures. Even though I'm sure the current code is ok, I totally
   dislike that s390 is the only architecture being special here;
   especially considering that there was a lengthly discussion about
   this topic and the outcome was not to use the builtins. Therefore
   open-code atomic ops again with inline assembly and switch to gcc
   builtins as soon as other architectures are doing.

 - couple of other changes to atomic and cmpxchg, and use
   atomic-instrumented.h for KASAN.

 - separate zbus creation, registration, and scanning in our PCI code
   which allows for cleaner and easier handling.

 - a rather large change to the vfio-ap code to fix circular locking
   dependencies when updating crypto masks.

 - move QAOB handling from qdio layer down to drivers.

 - add CRW inject facility to common I/O layer. This adds debugs files
   which allow to generate artificial events from user space for testing
   purposes.

 - increase SCLP console line length from 80 to 320 characters to avoid
   odd wrapped lines.

 - add protected virtualization guest and host indication files, which
   indicate either that a guest is running in pv mode or if the
   hypervisor is capable of starting pv guests.

 - various other small fixes and improvements all over the place.

* tag 's390-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
  s390/disassembler: increase ebpf disasm buffer size
  s390/archrandom: add parameter check for s390_arch_random_generate
  s390/zcrypt: fix zcard and zqueue hot-unplug memleak
  s390/pci: expose a PCI device's UID as its index
  s390/atomic,cmpxchg: always inline __xchg/__cmpxchg
  s390/smp: fix do_restart() prototype
  s390: get rid of oprofile leftovers
  s390/atomic,cmpxchg: make constraints work with old compilers
  s390/test_unwind: print test suite start/end info
  s390/cmpxchg: use unsigned long values instead of void pointers
  s390/test_unwind: add WARN if tests failed
  s390/test_unwind: unify error handling paths
  s390: update defconfigs
  s390/spinlock: use R constraint in inline assembly
  s390/atomic,cmpxchg: switch to use atomic-instrumented.h
  s390/cmpxchg: get rid of gcc atomic builtins
  s390/atomic: get rid of gcc atomic builtins
  s390/atomic: use proper constraints
  s390/atomic: move remaining inline assemblies to atomic_ops.h
  s390/bitops: make bitops only work on longs
  ...

Pull x86 updates from Borislav Petkov:

 - Turn the stack canary into a normal __percpu variable on 32-bit which
   gets rid of the LAZY_GS stuff and a lot of code.

 - Add an insn_decode() API which all users of the instruction decoder
   should preferrably use. Its goal is to keep the details of the
   instruction decoder away from its users and simplify and streamline
   how one decodes insns in the kernel. Convert its users to it.

 - kprobes improvements and fixes

 - Set the maximum DIE per package variable on Hygon

 - Rip out the dynamic NOP selection and simplify all the machinery
   around selecting NOPs. Use the simplified NOPs in objtool now too.

 - Add Xeon Sapphire Rapids to list of CPUs that support PPIN

 - Simplify the retpolines by folding the entire thing into an
   alternative now that objtool can handle alternatives with stack ops.
   Then, have objtool rewrite the call to the retpoline with the
   alternative which then will get patched at boot time.

 - Document Intel uarch per models in intel-family.h

 - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
   exception on Intel.

* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, sched: Treat Intel SNC topology as default, COD as exception
  x86/cpu: Comment Skylake server stepping too
  x86/cpu: Resort and comment Intel models
  objtool/x86: Rewrite retpoline thunk calls
  objtool: Skip magical retpoline .altinstr_replacement
  objtool: Cache instruction relocs
  objtool: Keep track of retpoline call sites
  objtool: Add elf_create_undef_symbol()
  objtool: Extract elf_symbol_add()
  objtool: Extract elf_strtab_concat()
  objtool: Create reloc sections implicitly
  objtool: Add elf_create_reloc() helper
  objtool: Rework the elf_rebuild_reloc_section() logic
  objtool: Fix static_call list generation
  objtool: Handle per arch retpoline naming
  objtool: Correctly handle retpoline thunk calls
  x86/retpoline: Simplify retpolines
  x86/alternatives: Optimize optimize_nops()
  x86: Add insn_decode_kernel()
  x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
  ...

It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".

Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).

This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.

At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.

[ It was a mistake to upgrade one of my machines to Fedora 34 while
  being busy with the merge window, but if this is the extent of the
  compiler upgrade problems, things are better than usual    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull audit updates from Paul Moore:
 "Another small pull request for audit, most of the patches are
  documentation updates with only two real code changes: one to fix a
  compiler warning for a dummy function/macro, and one to cleanup some
  code since we removed the AUDIT_FILTER_ENTRY ages ago (v4.17)"

* tag 'audit-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: drop /proc/PID/loginuid documentation Format field
  audit: avoid -Wempty-body warning
  audit: document /proc/PID/sessionid
  audit: document /proc/PID/loginuid
  MAINTAINERS: update audit files
  audit: further cleanup of AUDIT_FILTER_ENTRY deprecation

Pull selinux updates from Paul Moore:

 - Add support for measuring the SELinux state and policy capabilities
   using IMA.

 - A handful of SELinux/NFS patches to compare the SELinux state of one
   mount with a set of mount options. Olga goes into more detail in the
   patch descriptions, but this is important as it allows more
   flexibility when using NFS and SELinux context mounts.

 - Properly differentiate between the subjective and objective LSM
   credentials; including support for the SELinux and Smack. My clumsy
   attempt at a proper fix for AppArmor didn't quite pass muster so John
   is working on a proper AppArmor patch, in the meantime this set of
   patches shouldn't change the behavior of AppArmor in any way. This
   change explains the bulk of the diffstat beyond security/.

 - Fix a problem where we were not properly terminating the permission
   list for two SELinux object classes.

* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: add proper NULL termination to the secclass_map permissions
  smack: differentiate between subjective and objective task credentials
  selinux: clarify task subjective and objective credentials
  lsm: separate security_task_getsecid() into subjective and objective variants
  nfs: account for selinux security context when deciding to share superblock
  nfs: remove unneeded null check in nfs_fill_super()
  lsm,selinux: add new hook to compare new mount to an existing mount
  selinux: fix misspellings using codespell tool
  selinux: fix misspellings using codespell tool
  selinux: measure state and policy capabilities
  selinux: Allow context mounts for unpriviliged overlayfs

Merge tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull AFS updates from David Howells:
 "Use the new netfs lib.

  Begin the process of overhauling the use of the fscache API by AFS and
  the introduction of support for features such as Transparent Huge
  Pages (THPs).

   - Add some support for THPs, including using core VM helper functions
     to find details of pages.

   - Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
     as this handles THPs and doesn't require allocation of large bvec
     arrays.

   - Delegate address_space read/pre-write I/O methods for AFS to the
     netfs helper library. A method is provided to the library that
     allows it to issue a read against the server.

     This includes a change in use for PG_fscache (it now indicates a
     DIO write in progress from the marked page), so a number of waits
     need to be deployed for it.

   - Split the core AFS writeback function to make it easier to modify
     in future patches to handle writing to the cache. [This might
     feasibly make more sense moved out into my fscache-iter branch].

  I've tested these with "xfstests -g quick" against an AFS volume
  (xfstests needs patching to make it work). With this, AFS without a
  cache passes all expected xfstests; with a cache, there's an extra
  failure, but that's also there before these patches. Fixing that
  probably requires a greater overhaul (as can be found on my
  fscache-iter branch, but that's for a later time).

  Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
  exercising the patches in their test farm also"

Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/

* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Use the netfs_write_begin() helper
  afs: Use new netfs lib read helper API
  afs: Use the fs operation ops to handle FetchData completion
  afs: Prepare for use of THPs
  afs: Extract writeback extension into its own function
  afs: Wait on PG_fscache before modifying/releasing a page
  afs: Use ITER_XARRAY for writing
  afs: Set up the iov_iter before calling afs_extract_data()
  afs: Log remote unmarshalling errors
  afs: Don't truncate iter during data fetch
  afs: Move key to afs_read struct
  afs: Print the operation debug_id when logging an unexpected data version
  afs: Pass page into dirty region helpers to provide THP size
  afs: Disable use of the fscache I/O routines

Pull network filesystem helper library updates from David Howells:
 "Here's a set of patches for 5.13 to begin the process of overhauling
  the local caching API for network filesystems. This set consists of
  two parts:

  (1) Add a helper library to handle the new VM readahead interface.

      This is intended to be used unconditionally by the filesystem
      (whether or not caching is enabled) and provides a common
      framework for doing caching, transparent huge pages and, in the
      future, possibly fscrypt and read bandwidth maximisation. It also
      allows the netfs and the cache to align, expand and slice up a
      read request from the VM in various ways; the netfs need only
      provide a function to read a stretch of data to the pagecache and
      the helper takes care of the rest.

  (2) Add an alternative fscache/cachfiles I/O API that uses the kiocb
      facility to do async DIO to transfer data to/from the netfs's
      pages, rather than using readpage with wait queue snooping on one
      side and vfs_write() on the other. It also uses less memory, since
      it doesn't do buffered I/O on the backing file.

      Note that this uses SEEK_HOLE/SEEK_DATA to locate the data
      available to be read from the cache. Whilst this is an improvement
      from the bmap interface, it still has a problem with regard to a
      modern extent-based filesystem inserting or removing bridging
      blocks of zeros. Fixing that requires a much greater overhaul.

  This is a step towards overhauling the fscache API. The change is
  opt-in on the part of the network filesystem. A netfs should not try
  to mix the old and the new API because of conflicting ways of handling
  pages and the PG_fscache page flag and because it would be mixing DIO
  with buffered I/O. Further, the helper library can't be used with the
  old API.

  This does not change any of the fscache cookie handling APIs or the
  way invalidation is done at this time.

  In the near term, I intend to deprecate and remove the old I/O API
  (fscache_allocate_page{,s}(), fscache_read_or_alloc_page{,s}(),
  fscache_write_page() and fscache_uncache_page()) and eventually
  replace most of fscache/cachefiles with something simpler and easier
  to follow.

  This patchset contains the following parts:

   - Some helper patches, including provision of an ITER_XARRAY iov
     iterator and a function to do readahead expansion.

   - Patches to add the netfs helper library.

   - A patch to add the fscache/cachefiles kiocb API.

   - A pair of patches to fix some review issues in the ITER_XARRAY and
     read helpers as spotted by Al and Willy.

  Jeff Layton has patches to add support in Ceph for this that he
  intends for this merge window. I have a set of patches to support AFS
  that I will post a separate pull request for.

  With this, AFS without a cache passes all expected xfstests; with a
  cache, there's an extra failure, but that's also there before these
  patches. Fixing that probably requires a greater overhaul. Ceph also
  passes the expected tests.

  I also have patches in a separate branch to tidy up the handling of
  PG_fscache/PG_private_2 and their contribution to page refcounting in
  the core kernel here, but I haven't included them in this set and will
  route them separately"

Link: https://lore.kernel.org/lkml/3779937.1619478404@warthog.procyon.org.uk/

* tag 'netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Miscellaneous fixes
  iov_iter: Four fixes for ITER_XARRAY
  fscache, cachefiles: Add alternate API to use kiocb for read/write to cache
  netfs: Add a tracepoint to log failures that would be otherwise unseen
  netfs: Define an interface to talk to a cache
  netfs: Add write_begin helper
  netfs: Gather stats
  netfs: Add tracepoints
  netfs: Provide readahead and readpage netfs helpers
  netfs, mm: Add set/end/wait_on_page_fscache() aliases
  netfs, mm: Move PG_fscache helper funcs to linux/netfs.h
  netfs: Documentation for helper library
  netfs: Make a netfs helper module
  mm: Implement readahead_control pageset expansion
  mm/readahead: Handle ractl nr_pages being modified
  fs: Document file_ra_state
  mm/filemap: Pass the file_ra_state in the ractl
  mm: Add set/end/wait functions for PG_private_2
  iov_iter: Add ITER_XARRAY

Merge tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull fs mapping helper updates from Christian Brauner:
 "This adds kernel-doc to all new idmapping helpers and improves their
  naming which was triggered by a discussion with some fs developers.
  Some of the names are based on suggestions by Vivek and Al.

  Also remove the open-coded permission checking in a few places with
  simple helpers. Overall this should lead to more clarity and make it
  easier to maintain"

* tag 'fs.idmapped.helpers.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: introduce two inode i_{u,g}id initialization helpers
  fs: introduce fsuidgid_has_mapping() helper
  fs: document and rename fsid helpers
  fs: document mapping helpers

Pull fs helper kernel-doc updates from Christian Brauner:
 "In the last cycles we forgot to update the kernel-docs in some places
  that were changed during the idmapped mount work. Lukas and Randy took
  the chance to not just fixup those places but also fixup and expand
  kernel-docs for some additional helpers.

  No functional changes"

* tag 'fs.idmapped.docs.v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: update kernel-doc for vfs_rename()
  fs: turn some comments into kernel-doc
  xattr: fix kernel-doc for mnt_userns and vfs xattr helpers
  namei: fix kernel-doc for struct renamedata and more
  libfs: fix kernel-doc for mnt_userns

Pull iomap update from Darrick Wong:
 "A single patch to the iomap code, which augments what gets logged when
  someone tries to swapon an unacceptable swap file. (Yes, this is a
  continuation of the swapfile drama from last season...)"

* tag 'iomap-5.13-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: improve the warnings from iomap_swapfile_activate

Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
 "This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
  separate method.

  The interface is reasonably uniform across the filesystems that
  support it and gives nice boilerplate removal"

* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
  ovl: remove unneeded ioctls
  fuse: convert to fileattr
  fuse: add internal open/release helpers
  fuse: unsigned open flags
  fuse: move ioctl to separate source file
  vfs: remove unused ioctl helpers
  ubifs: convert to fileattr
  reiserfs: convert to fileattr
  ocfs2: convert to fileattr
  nilfs2: convert to fileattr
  jfs: convert to fileattr
  hfsplus: convert to fileattr
  efivars: convert to fileattr
  xfs: convert to fileattr
  orangefs: convert to fileattr
  gfs2: convert to fileattr
  f2fs: convert to fileattr
  ext4: convert to fileattr
  ext2: convert to fileattr
  btrfs: convert to fileattr
  ...

Pull coredump updates from Al Viro:
 "Just a couple of patches this cycle: use of seek + write instead of
  expanding truncate and minor header cleanup"

* 'work.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coredump.h: move CONFIG_COREDUMP-only stuff inside the ifdef
  coredump: don't bother with do_truncate()

Pull vfs inode type handling updates from Al Viro:
 "We should never change the type bits of ->i_mode or the method tables
  (->i_op and ->i_fop) of a live inode.

  Unfortunately, not all filesystems took care to prevent that"

* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  spufs: fix bogosity in S_ISGID handling
  9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
  openpromfs: don't do unlock_new_inode() until the new inode is set up
  hostfs_mknod(): don't bother with init_special_inode()
  cifs: have cifs_fattr_to_inode() refuse to change type on live inode
  cifs: have ->mkdir() handle race with another client sanely
  do_cifs_create(): don't set ->i_mode of something we had not created
  gfs2: be careful with inode refresh
  ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
  orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
  vboxsf: don't allow to change the inode type
  afs: Fix updating of i_mode due to 3rd party change
  ceph: don't allow type or device number to change on non-I_NEW inodes
  ceph: fix up error handling with snapdirs
  new helper: inode_wrong_type()

Pull CFI on arm64 support from Kees Cook:
 "This builds on last cycle's LTO work, and allows the arm64 kernels to
  be built with Clang's Control Flow Integrity feature. This feature has
  happily lived in Android kernels for almost 3 years[1], so I'm excited
  to have it ready for upstream.

  The wide diffstat is mainly due to the treewide fixing of mismatched
  list_sort prototypes. Other things in core kernel are to address
  various CFI corner cases. The largest code portion is the CFI runtime
  implementation itself (which will be shared by all architectures
  implementing support for CFI). The arm64 pieces are Acked by arm64
  maintainers rather than coming through the arm64 tree since carrying
  this tree over there was going to be awkward.

  CFI support for x86 is still under development, but is pretty close.
  There are a handful of corner cases on x86 that need some improvements
  to Clang and objtool, but otherwise works well.

  Summary:

   - Clean up list_sort prototypes (Sami Tolvanen)

   - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"

* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  arm64: allow CONFIG_CFI_CLANG to be selected
  KVM: arm64: Disable CFI for nVHE
  arm64: ftrace: use function_nocfi for ftrace_call
  arm64: add __nocfi to __apply_alternatives
  arm64: add __nocfi to functions that jump to a physical address
  arm64: use function_nocfi with __pa_symbol
  arm64: implement function_nocfi
  psci: use function_nocfi for cpu_resume
  lkdtm: use function_nocfi
  treewide: Change list_sort to use const pointers
  bpf: disable CFI in dispatcher functions
  kallsyms: strip ThinLTO hashes from static functions
  kthread: use WARN_ON_FUNCTION_MISMATCH
  workqueue: use WARN_ON_FUNCTION_MISMATCH
  module: ensure __cfi_check alignment
  mm: add generic function_nocfi macro
  cfi: add __cficanonical
  add support for Clang CFI

Pull overflow update from Kees Cook:
 "I was expecting more in this tree for this cycle, but the other work
  has not yet landed for -next. As a result, only this single typo fix
  exists. Yay tiny pulls. :)

   - Fix typo in check_shl_overflow() kern-dec (Keith Busch)"

* tag 'overflow-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  overflow: Correct check_shl_overflow() comment

Pull pstore update from Kees Cook:

 - Add mem_type property to expand support for >2 memory types (Mukesh Ojha)

* tag 'pstore-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Add mem_type property DT parsing support

Pull seccomp updates from Kees Cook:

 - Fix "cacheable" typo in comments (Cui GaoSheng)

 - Fix CONFIG for /proc/$pid/status Seccomp_filters (Kenta.Tada@sony.com)

* tag 'seccomp-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Fix "cacheable" typo in comments
  seccomp: Fix CONFIG tests for Seccomp_filters

Harald Arnesen reported [1] a deadlock at reboot time, and after
he captured a stack trace a picture developed of what's going on:

The distribution he's using is using iwd (not wpa_supplicant) to
manage wireless. iwd will usually use the "socket owner" option
when it creates new interfaces, so that they're automatically
destroyed when it quits (unexpectedly or otherwise). This is also
done by wpa_supplicant, but it doesn't do it for the normal one,
only for additional ones, which is different with iwd.

Anyway, during shutdown, iwd quits while the netdev is still UP,
i.e. IFF_UP is set. This causes the stack trace that Linus so
nicely transcribed from the pictures:

cfg80211_destroy_iface_wk() takes wiphy_lock
 -> cfg80211_destroy_ifaces()
  ->ieee80211_del_iface
    ->ieeee80211_if_remove
      ->cfg80211_unregister_wdev
        ->unregister_netdevice_queue
          ->dev_close_many
            ->__dev_close_many
              ->raw_notifier_call_chain
                ->cfg80211_netdev_notifier_call
and that last call tries to take wiphy_lock again.

In commit a05829a7 ("cfg80211: avoid holding the RTNL when
calling the driver") I had taken into account the possibility of
recursing from cfg80211 into cfg80211_netdev_notifier_call() via
the network stack, but only for NETDEV_UNREGISTER, not for what
happens here, NETDEV_GOING_DOWN and NETDEV_DOWN notifications.

Additionally, while this worked still back in commit 78f22b6a
("cfg80211: allow userspace to take ownership of interfaces"), it
missed another corner case: unregistering a netdev will cause
dev_close() to be called, and thus stop wireless operations (e.g.
disconnecting), but there are some types of virtual interfaces in
wifi that don't have a netdev - for that we need an additional
call to cfg80211_leave().

So, to fix this mess, change cfg80211_destroy_ifaces() to not
require the wiphy_lock(), but instead make it acquire it, but
only after it has actually closed all the netdevs on the list,
and then call cfg80211_leave() as well before removing them
from the driver, to fix the second issue. The locking change in
this requires modifying the nl80211 call to not get the wiphy
lock passed in, but acquire it by itself after flushing any
potentially pending destruction requests.

[1] https://lore.kernel.org/r/09464e67-f3de-ac09-28a3-e27b7914ee7d@skogtun.org

Cc: stable@vger.kernel.org # 5.12
Reported-by: Harald Arnesen <harald@skogtun.org>
Fixes: 776a39b8 ("cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held")
Fixes: 78f22b6a ("cfg80211: allow userspace to take ownership of interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Harald Arnesen <harald@skogtun.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi updates from Mark Brown:
 "The only core work for SPI this time around is the completion of the
  conversion to the new style method for specifying transfer delays,
  meaning we can cope with what most controllers support more directly
  using conversions in the core rather than open coding in drivers.

  Otherwise it's a good stack of cleanups and fixes plus a few new
  drivers.

  Summary:

   - Completion of the conversion to new style transfer delay
     configuration

   - Introduction and use of module_parport_driver() helper, merged here
     as there's no parport tree

   - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon
     Kunpeng, MediaTek MT8195"

* tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits)
  spi: Rename enable1 to activate in spi_set_cs()
  spi: Convert Freescale QSPI binding to json schema
  spi: stm32-qspi: fix debug format string
  spi: tools: make a symbolic link to the header file spi.h
  spi: fsi: add a missing of_node_put
  spi: Make error handling of gpiod_count() call cleaner
  spidev: Add Micron SPI NOR Authenta device compatible
  spi: brcm,spi-bcm-qspi: convert to the json-schema
  spi: altera: Add DFL bus driver for Altera API Controller
  spi: altera: separate core code from platform code
  spi: stm32-qspi: Fix compilation warning in ARM64
  spi: Handle SPI device setup callback failure.
  spi: sync up initial chipselect state
  spi: stm32-qspi: Add dirmap support
  spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer
  spi: stm32-qspi: fix pm_runtime usage_count counter
  spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
  spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
  spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug
  spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
  ...

Pull regulator updates from Mark Brown:
 "Not much going on with regulator this cycle, even in terms of cleanups
  and fixes things were fairly quiet.

   - New helper for setting ramp delay

   - Conversion of the Qualcomm RPMH bindings to YAML

   - Support for Tang Cheng TCS4525"

* tag 'regulator-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
  regulator: Add binding for TCS4525
  regulator: fan53555: Add TCS4525 DCDC support
  dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)
  regulator: core: Fix off_on_delay handling
  regulator: core: Respect off_on_delay at startup
  regulator: core.c: Improve a comment
  regulator: Avoid a double 'of_node_get' in 'regulator_of_get_init_node()'
  regulator: core.c: Fix indentation of comment
  regulator: s2mps11: Drop initialization via platform data
  regulator: s2mpa01: Drop initialization via platform data
  regulator: da9121: automotive variants identity fix
  regulator: Add regmap helper for ramp-delay setting
  regulator: helpers: Export helper voltage listing
  regulator: Add compatibles for PM7325/PMR735A
  regulator: Convert RPMh regulator bindings to YAML
  regulator: qcom-rpmh: Add PM7325/PMR735A regulator support
  regulator: qcom-rpmh: Add pmic5_ftsmps520 buck
  regulator: mt6360: remove redundant error print
  regulator: bd9576: Fix return from bd957x_probe()
  regulator: add missing call to of_node_put()
  ...

Pull regmap updates from Mark Brown:
 "A couple of fixes in this release, plus a couple of new features for
  regmap-irq - we now support sub-irq blocks at arbatrary addresses and
  can remap configuration bitfields for interrupts split over multiple
  registers to the Linux configurations"

* tag 'regmap-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Fix dereference of a potentially null d->virt_buf
  regmap-irq: Add driver callback to configure virtual regs
  regmap-irq: Introduce virtual regs to handle more config regs
  regmap-irq: Extend sub-irq to support non-fixed reg strides
  regmap: set debugfs_name to NULL after it is freed

Pull mtd updates from Miquel Raynal:
 "MTD core:
   - Handle possible -EPROBE_DEFER from parse_mtd_partitions()
   - Constify buf in mtd_write_user_prot_reg()
   - Constify name param in mtd_bdi_init
   - Fix fall-through warnings for Clang
   - Get rid of Big MTD Lock ouf of mtdchar
   - Drop mtd_mutex usage from mtdchar_open()
   - Don't lock when recursively deleting partitions
   - Use module_mtd_blktrans() to register driver when relevant
   - Parse MTD as NVMEM cells
   - New OTP (one-time-programmable) erase ioctl
   - Require write permissions for locking and badblock ioctls
   - physmap:
      - Fix error return code of physmap_flash_remove()
      - physmap-bt1-rom: Fix unintentional stack access
   - ofpart parser:
      - Support Linksys Northstar partitions
      - Make symbol 'bcm4908_partitions_quirks' static
      - Limit parsing of deprecated DT syntax
      - Support BCM4908 fixed partitions
   - Qcom parser:
      - Incompatible with spi-nor 4k sectors
      - Fix error condition
      - Extend Qcom SMEM parser to SPI flash

  CFI:
   - Disable broken buffered writes for CFI chips within ID 0x2201
   - Address a Coverity report for unused value

  SPI NOR core:
   - Add OTP support
   - Fix module unload while an op in progress
   - Add various cleanup patches
   - Add Michael and Pratyush as designated reviewers in MAINTAINERS

  SPI NOR controller drivers:
   - intel-spi:
      - Move platform data header to x86 subfolder

  NAND core:
   - Fix error handling in nand_prog_page_op() (x2)
   - Add a helper to retrieve the number of ECC bytes per step
   - Add a helper to retrieve the number of ECC steps
   - Let ECC engines advertize the exact number of steps
   - ECC Hamming:
      - Populate the public nsteps field
      - Use the public nsteps field
   - ECC BCH:
      - Populate the public nsteps field
      - Use the public nsteps field

  Raw NAND core:
   - Add support for secure regions in NAND memory
   - Try not to use the ECC private structures
   - Remove duplicate include in rawnand.h
   - BBT:
      - Skip bad blocks when searching for the BBT in NAND (APPLIED THEN REVERTED)

  Raw NAND controller drivers:
   - Qcom:
      - Convert bindings to YAML
      - Use dma_mapping_error() for error check
      - Add missing nand_cleanup() in error path
      - Return actual error code instead of -ENODEV
      - Update last code word register
      - Add helper to configure location register
      - Rename parameter name in macro
      - Add helper to check last code word
      - Convert nandc to chip in Read/Write helper
      - Update register macro name for 0x2c offset
   - GPMI:
      - Fix a double free in gpmi_nand_init
   - Rockchip:
      - Use flexible-array member instead of zero-length array
   - Atmel:
      - Update ecc_stats.corrected counter
   - MXC:
      - Remove unneeded of_match_ptr()
   - R852:
      - replace spin_lock_irqsave by spin_lock in hard IRQ
   - Brcmnand:
      - Move to polling in pio mode on oops write
      - Read/write oob during EDU transfer
      - Fix OOB R/W with Hamming ECC
   - FSMC:
      - Fix error code in fsmc_nand_probe()
   - OMAP:
      - Use ECC information from the generic structures

  SPI-NAND core:
   - Add missing MODULE_DEVICE_TABLE()

  SPI-NAND drivers:
   - gigadevice: Support GD5F1GQ5UExxG"

* tag 'mtd/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (89 commits)
  Revert "mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND"
  mtd: core: Constify buf in mtd_write_user_prot_reg()
  Revert "mtd: spi-nor: macronix: Add support for mx25l51245g"
  mtd: spi-nor: core: Fix an issue of releasing resources during read/write
  mtd: cfi_cmdset_0002: remove redundant assignment to variable timeo
  mtd: cfi_cmdset_0002: Disable buffered writes for AMD chip 0x2201
  mtd: rawnand: qcom: Use dma_mapping_error() for error check
  mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
  mtd: rawnand: qcom: Add missing nand_cleanup() in error path
  mtd: rawnand: Add support for secure regions in NAND memory
  dt-bindings: mtd: Add a property to declare secure regions in NAND chips
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  mtd: spi-nor: winbond: add OTP support to w25q32fw/jw
  mtd: spi-nor: implement OTP support for Winbond and similar flashes
  mtd: spi-nor: add OTP support
  mtd: spi-nor: swp: Improve code around spi_nor_check_lock_status_sr()
  mtd: spi-nor: Move Software Write Protection logic out of the core
  mtd: rawnand: bbt: Skip bad blocks when searching for the BBT in NAND
  include: linux: mtd: Remove duplicate include of nand.h
  mtd: parsers: ofpart: support Linksys Northstar partitions
  ...

Pull dmi update from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  MAINTAINERS: The DMI/SMBIOS tree has moved
  firmware/dmi: Include product_sku info to modalias

Fix some miscellaneous things in the new netfs lib[1]:

 (1) The kerneldoc for netfs_readpage() shouldn't say netfs_page().

 (2) netfs_readpage() can get an integer overflow on 32-bit when it
     multiplies page_index(page) by PAGE_SIZE.  It should use
     page_file_offset() instead.

 (3) netfs_write_begin() should use page_offset() to avoid the same
     overflow.

Note that netfs_readpage() needs to use page_file_offset() rather than
page_offset() as it may see swap-over-NFS.
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/161789062190.6155.12711584466338493050.stgit@warthog.procyon.org.uk/ [1]

Pull device properties framework update from Rafael Wysocki:
 "Add MAINTAINERS entry for software nodes core code (Heikki Krogerus)"

* tag 'devprop-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: Add entry for the software nodes

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision including (but not limited to) new material introduced in the
  6.4 version of the spec, update message printing in the ACPI-related
  code, address a few issues and clean up code in a number of places.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210331
     including the following changes:

      * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
        Monakov).

      * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
        Widawsky, Bob Moore).

      * NFIT: add Location Cookie field (Bob Moore).

      * HMAT: add new fields/flags (Bob Moore).

      * Add new flags in SRAT (Bob Moore).

      * PMTT: add new fields/structures (Bob Moore).

      * Add CSI2Bus resource template (Bob Moore).

      * iASL: Decode subtable type field for VIOT (Bob Moore).

      * Fix various typos and spelling mistakes (Colin Ian King).

      * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).

      * Add USB4 capabilities UUID (Erik Kaneda).

      * Add CXL ACPI device ID and _CBR object (Erik Kaneda).

      * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).

      * PCCT: add support for subtable type 5 (Erik Kaneda).

      * PPTT: add new version of subtable type 1 (Erik Kaneda).

      * Add SDEV secure access components (Erik Kaneda).

      * Add support for PHAT table (Erik Kaneda).

      * iASL: Add definitions for the VIOT table (Jean-Philippe
        Brucker).

      * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
        Brucker).

      * IORT: Updates for revision E.b (Shameer Kolothum).

   - Rearrange message printing in ACPI-related code to avoid using the
     ACPICA's internal message printing macros outside ACPICA and do
     some related code cleanups (Rafael Wysocki).

   - Modify the device enumeration code to turn off all of the unused
     ACPI power resources at the end (Rafael Wysocki).

   - Change the ACPI power resources handling code to turn off unused
     ACPI power resources without checking their status which should not
     be necessary by the spec (Rafael Wysocki).

   - Add empty stubs for CPPC-related functions to be used when
     CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).

   - Simplify device enumeration code (Rafael Wysocki).

   - Change device enumeration code to use match_string() for string
     matching (Andy Shevchenko).

   - Modify irqresource_disabled() to retain the resouce flags that have
     been set already (Angela Czubak).

   - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
     Jones).

   - Modify the ACPI backlight driver to let the native backlight
     handling take over on hardware-reduced systems (Hans de Goede).

   - Introduce acpi_dev_get() and switch over the ACPI core code to
     using it (Andy Shevchenko).

   - Use kobj_attribute as callback argument instead of a local struct
     type in the CPPC linrary code (Nathan Chancellor).

   - Drop unneeded initializatio of a static variable from the ACPI
     processor driver (Tian Tao).

   - Drop unnecessary local variable assignment from the ACPI APEI code
     (Colin Ian King).

   - Document for_each_acpi_dev_match() macro (Andy Shevchenko).

   - Address assorted coding style issues in multiple places (Xiaofei
     Tan).

   - Capitalize TLAs in a few comments (Andy Shevchenko).

   - Correct assorted typos in comments (Tom Saeger)"

* tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  ACPI: video: use native backlight for GA401/GA502/GA503
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: utils: Capitalize abbreviations in the comments
  ACPI: utils: Document for_each_acpi_dev_match() macro
  ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
  ACPI: scan: Utilize match_string() API
  resource: Prevent irqresource_disabled() from erasing flags
  ACPI: CPPC: Replace cppc_attr with kobj_attribute
  ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
  ACPI: scan: Drop sta argument from acpi_init_device_object()
  ACPI: scan: Drop sta argument from acpi_add_single_object()
  ACPI: scan: Rearrange checks in acpi_bus_check_add()
  ACPI: scan: Fold acpi_bus_type_and_status() into its caller
  ACPI: video: Check LCD flag on ACPI-reduced-hardware devices
  ACPI: utils: Add acpi_reduced_hardware() helper
  ACPI: dock: fix some coding style issues
  ACPI: sysfs: fix some coding style issues
  ACPI: PM: add a missed blank line after declarations
  ACPI: custom_method: fix a coding style issue
  ACPI: CPPC: fix some coding style issues
  ...

Pull hwmon updates from Guenter Roeck:
 "The most notable change is the removal of the amd_energy driver. It
  was rendered all but unusable by making its attributes privileged-only
  to work around a security issue. A suggested remedy was rejected by
  AMD, so the only real solution was to remove the driver. For the
  future, we'll have to make sure that no privileged-access-only drivers
  are accepted into the hwmon subsystem in the first place. The hwmon
  ABI document was updated accordingly.

  Other changes:

  PMBus drivers:
   - Added driver for MAX15301
   - Added driver for BluTek BPA-RS600
   - Added driver for fsp-3y PSUs and PDUs
   - Added driver for Infineon IR36021
   - Added driver for ST STPDDC60
   - Added support for TI TPS53676 to tps53679 driver
   - Introduced PMBUS symbol namespace. This was made necessary by a
     suggestion to use its exported functions from outside the hwmon
     subsystem.
   - Minor improvements and bug fixes

  New drivers:
   - Driver for NZXT Kraken X42/X52/X62/X72

  Driver enhancements:
   - Added support for Intel D5005 to intel-m10-bmc-hwmon driver
   - Added support for NCT6686D to nct6683 driver

  Other:
   - Converted sch5627 and amd9240 drivers to
     hwmon_device_register_with_info()
   - Added support for fan drawers capability and present registers to
     mlxreg-fan driver
   - Added Dell Latitude E7440 to fan control whitelist in dell-smm
     driver
   - Replaced snprintf in show functions with sysfs_emit. Done with
     coccinelle script for all drivers to preempt endless per-driver
     submissions of the same change.
   - Use kobj_to_dev().  Another coccinelle based change to preempt
     endless per-driver submissions of the same change.
   - Various minor fixes and improvements"

* tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits)
  hwmon: Remove amd_energy driver
  hwmon: Clarify scope of attribute access
  hwmon: (pmbus) Introduce PMBUS symbol namespace
  hwmon: (pmbus) Add pmbus driver for MAX15301
  hwmon: (sch5627) Remove unnecessary error path
  hwmon: (sch5627) Use devres function
  hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
  hwmon: Add driver for fsp-3y PSUs and PDUs
  hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card
  hwmon: (sch5627) Split sch5627_update_device()
  hwmon: (sch5627) Convert to hwmon_device_register_with_info()
  hwmon: (nct6683) remove useless function
  hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist
  MAINTAINERS: Add keyword pattern for hwmon registration functions
  hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers
  hwmon: (pmbus/tps53679) Add support for TI TPS53676
  dt-bindings: Add trivial device entry for TPS53676
  hwmon: (ftsteutates) Rudimentary typo fixes
  hwmon: (pmbus) Add driver for BluTek BPA-RS600
  dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600
  ...