- 12 Apr, 2016 26 commits
-
-
Phil Elwell authored
commit 2c7e3306 upstream. The DT bindings for pinctrl-bcm2835 allow both the function and pull to contain either one entry or one per pin. However, an error in the DT parsing can cause failures if the number of pulls differs from the number of functions. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Reviewed-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Ott authored
commit 80c544de upstream. The function measurement block must not cross a page boundary. Ensure that by raising the alignment requirement to the smallest power of 2 larger than the size of the fmb. Fixes: d0b08853 ("s390/pci: performance statistics and debug infrastructure") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 8f100bb1 upstream. Add the missing lpp magic initialization for cpu 0. Without this all samples on cpu 0 do not have the most significant bit set in the program parameter field, which we use to distinguish between guest and host samples if the pid is also 0. We did initialize the lpp magic in the absolute zero lowcore but forgot that when switching to the allocated lowcore on cpu 0 only. Reported-by:
Shu Juan Zhang <zhshuj@cn.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: e22cf8ca ("s390/cpumf: rework program parameter setting to detect guest samples") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit e370e476 upstream. There is a tricky interaction between the machine check handler and the critical sections of load_fpu_regs and save_fpu_regs functions. If the machine check interrupts one of the two functions the critical section cleanup will complete the function before the machine check handler s390_do_machine_check is called. Trouble is that the machine check handler needs to validate the floating point registers *before* and not *after* the completion of load_fpu_regs/save_fpu_regs. The simplest solution is to rewind the PSW to the start of the load_fpu_regs/save_fpu_regs and retry the function after the return from the machine check handler. Tested-by:
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Tony Luck authored
commit eb1af3b7 upstream. Large memory Haswell-EX systems with multiple DIMMs per channel were sometimes reporting the wrong DIMM. Found three problems: 1) Debug printouts for socket and channel interleave were not interpreting the register fields correctly. The socket interleave field is a 2^X value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2, 2=3. 3=4). 2) Actual use of the socket interleave value didn't interpret as 2^X 3) Conversion of address to channel address was complicated, and wrong. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Hildenbrand authored
commit b15d53d0 upstream. kmap_coherent needs disabled preemption to not schedule in the critical section, just like kmap_coherent on mips and kmap_atomic in general. Fixes: 8222dbe2 "sched/preempt, mm/fault: Decouple preemption from the page fault logic" Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Byungchul Park authored
commit 7400d3bb upstream. decay_load_missed() cannot handle nagative values, so we need to prevent using the function with a negative value. Reported-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: perterz@infradead.org Fixes: 59543275 ("sched/fair: Prepare __update_cpu_load() to handle active tickless") Link: http://lkml.kernel.org/r/20160115070749.GA1914@X58A-UD3RSigned-off-by:
-
Chris Friesen authored
commit f9c904b7 upstream. The callers of steal_account_process_tick() expect it to return whether a jiffy should be considered stolen or not. Currently the return value of steal_account_process_tick() is in units of cputime, which vary between either jiffies or nsecs depending on CONFIG_VIRT_CPU_ACCOUNTING_GEN. If cputime has nsecs granularity and there is a tiny amount of stolen time (a few nsecs, say) then we will consider the entire tick stolen and will not account the tick on user/system/idle, causing /proc/stats to show invalid data. The fix is to change steal_account_process_tick() to accumulate the stolen time and only account it once it's worth a jiffy. (Thanks to Frederic Weisbecker for suggestions to fix a bug in my first version of the patch.) Signed-off-by:
Chris Friesen <chris.friesen@windriver.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/56DBBDB8.40305@mail.usask.caSigned-off-by:
-
Zhang Rui authored
commit 81ad4276 upstream. In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba2 Author: Zhang Rui <rui.zhang@intel.com> Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by:
Manuel Krause <manuelkrause@netscape.net> Tested-by:
szegad <szegadlo@poczta.onet.pl> Tested-by:
prash <prash.n.rao@gmail.com> Tested-by:
amish <ammdispose-arch@yahoo.com> Tested-by:
Matthias <morpheusxyz123@yahoo.de> Reviewed-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551Signed-off-by:
-
Jiri Olsa authored
commit 67d52689 upstream. The util/python-ext-sources file contains source files required to build the python extension relative to $(srctree)/tools/perf, Such a file path $(FILE).c is handed over to the python extension build system, which builds the final object in the $(PYTHON_EXTBUILD)/tmp/$(FILE).o path. After the build is done all files from $(PYTHON_EXTBUILD)lib/ are carried as the result binaries. Above system fails when we add source file relative to ../lib, which we do for: ../lib/bitmap.c ../lib/find_bit.c ../lib/hweight.c ../lib/rbtree.c All above objects will be built like: $(PYTHON_EXTBUILD)/tmp/../lib/bitmap.c $(PYTHON_EXTBUILD)/tmp/../lib/find_bit.c $(PYTHON_EXTBUILD)/tmp/../lib/hweight.c $(PYTHON_EXTBUILD)/tmp/../lib/rbtree.c which accidentally happens to be final library path: $(PYTHON_EXTBUILD)/lib/ Changing setup.py to pass full paths of source files to Extension build class and thus keep all built objects under $(PYTHON_EXTBUILD)tmp directory. Reported-by:
Jeff Bastian <jbastian@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Josh Boyer <jwboyer@fedoraproject.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20160227201350.GB28494@krava.redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Wang Nan authored
commit 26dee028 upstream. According to man pages, asprintf returns -1 when failure. This patch fixes two incorrect return value checker. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Fixes: ffeb883e ("perf tools: Show proper error message for wrong terms of hw/sw events") Link: http://lkml.kernel.org/r/1455882283-79592-5-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Andi Kleen authored
commit 940db6dc upstream. When an error happens during alias parsing currently the complete parsing of all attributes of the PMU is stopped. This is breaks old perf on a newer kernel that may have not-yet-know alias attributes (such as .scale or .per-pkg). Continue when some attribute is unparseable. This is IMHO a stable candidate and should be backported to older versions to avoid problems with newer kernels. v2: Print warnings when something goes wrong. v3: Change warning to debug output Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1455749095-18358-1-git-send-email-andi@firstfloor.orgSigned-off-by:
-
Alexander Shishkin authored
commit 927a5570 upstream. The error path in perf_event_open() is such that asking for a sampling event on a PMU that doesn't generate interrupts will end up in dropping the perf_sched_count even though it hasn't been incremented for this event yet. Given a sufficient amount of these calls, we'll end up disabling scheduler's jump label even though we'd still have active events in the system, thereby facilitating the arrival of the infernal regions upon us. I'm fixing this by moving account_event() inside perf_event_alloc(). Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit ef697a71 upstream. Old KVM guests invoke single-context invvpid without actually checking whether it is supported. This was fixed by commit 518c8aee ("KVM: VMX: Make sure single type invvpid is supported before issuing invvpid instruction", 2010-08-01) and the patch after, but pre-2.6.36 kernels lack it including RHEL 6. Reported-by: jmontleo@redhat.com Tested-by: jmontleo@redhat.com Fixes: 99b83ac8Reviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit f6870ee9 upstream. A guest executing an invalid invvpid instruction would hang because the instruction pointer was not updated. Reported-by: jmontleo@redhat.com Tested-by: jmontleo@redhat.com Fixes: 99b83ac8Reviewed-by:
-
Paolo Bonzini authored
commit 2849eb4f upstream. A guest executing an invalid invept instruction would hang because the instruction pointer was not updated. Fixes: bfd0a56bReviewed-by:
-
Paolo Bonzini authored
commit e9ad4ec8 upstream. Moving the initialization earlier is needed in 4.6 because kvm_arch_init_vm is now using mmu_lock, causing lockdep to complain: [ 284.440294] INFO: trying to register non-static key. [ 284.445259] the code is fine but needs lockdep annotation. [ 284.450736] turning off the locking correctness validator. ... [ 284.528318] [<ffffffff810aecc3>] lock_acquire+0xd3/0x240 [ 284.533733] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.541467] [<ffffffff81715581>] _raw_spin_lock+0x41/0x80 [ 284.546960] [<ffffffffa0305aa0>] ? kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.554707] [<ffffffffa0305aa0>] kvm_page_track_register_notifier+0x20/0x60 [kvm] [ 284.562281] [<ffffffffa02ece70>] kvm_mmu_init_vm+0x20/0x30 [kvm] [ 284.568381] [<ffffffffa02dbf7a>] kvm_arch_init_vm+0x1ea/0x200 [kvm] [ 284.574740] [<ffffffffa02bff3f>] kvm_dev_ioctl+0xbf/0x4d0 [kvm] However, it also helps fixing a preexisting problem, which is why this patch is also good for stable kernels: kvm_create_vm was incrementing current->mm->mm_count but not decrementing it at the out_err label (in case kvm_init_mmu_notifier failed). The new initialization order makes it possible to add the required mmdrop without adding a new error label. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Radim Krčmář authored
commit 7dd0fdff upstream. Discard policy uses ack_notifiers to prevent injection of PIT interrupts before EOI from the last one. This patch changes the policy to always try to deliver the interrupt, which makes a difference when its vector is in ISR. Old implementation would drop the interrupt, but proposed one injects to IRR, like real hardware would. The old policy breaks legacy NMI watchdogs, where PIT is used through virtual wire (LVT0): PIT never sends an interrupt before receiving EOI, thus a guest deadlock with disabled interrupts will stop NMIs. Note that NMI doesn't do EOI, so PIT also had to send a normal interrupt through IOAPIC. (KVM's PIT is deeply rotten and luckily not used much in modern systems.) Even though there is a chance of regressions, I think we can fix the LVT0 NMI bug without introducing a new tick policy. Reported-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4e422bdd upstream. Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in both the host and the guest, for example by running "./bp 0 1" on the host and "./bp 14 15" under QEMU. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Suggested-by:
Nadadv Amit <namit@cs.technion.ac.il> Reported-by:
Andrey Wagin <avagin@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit b8941571 upstream. The Home Agent and PCU PCI devices in Broadwell-EP have a non-BAR register where a BAR should be. We don't know what the side effects of sizing the "BAR" would be, and we don't know what address space the "BAR" might appear to describe. Mark these devices as having non-compliant BARs so the PCI core doesn't touch them. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by:
-
Stephane Eranian authored
commit 5690ae28 upstream. This patch adds a definition for GLOBAL_OVFL_STATUS bit 55 which is used with the Processor Trace (PT) feature. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Andy Lutomirski authored
commit 4e79e182 upstream. Signal delivery needs to know the sign of an interrupted syscall's return value in order to detect -ERESTART variants. Normally this works independently of bitness because syscalls internally return long. Under ptrace, however, this can break, and syscall_get_error is supposed to sign-extend regs->ax if needed. We were clearing TS_COMPAT too early, though, and this prevented sign extension, which subtly broke syscall restart under ptrace. Reported-by:
Robert O'Callahan <robert@ocallahan.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c5c46f59 ("x86/entry: Add new, comprehensible entry and exit handlers written in C") Link: http://lkml.kernel.org/r/cbce3cf545522f64eb37f5478cb59746230db3b5.1455142412.git.luto@kernel.orgSigned-off-by:
-
Borislav Petkov authored
commit 5f9c01aa upstream. Thomas Voegtle reported that doing oldconfig with a .config which has CONFIG_MICROCODE enabled but BLK_DEV_INITRD disabled prevents the microcode loading mechanism from being built. So untangle it from the BLK_DEV_INITRD dependency so that oldconfig doesn't turn it off and add an explanatory text to its Kconfig help what the supported methods for supplying microcode are. Reported-by:
Thomas Voegtle <tv@lio96.de> Tested-by:
-
Borislav Petkov authored
commit 264285ac upstream. Set the initrd @start depending on the presence of an initrd. Otherwise, builtin microcode loading doesn't work as the start is wrong and we're using it to compute offset to the microcode blobs. Tested-by:
-
- 14 Mar, 2016 1 commit
-
-
Linus Torvalds authored
-
- 13 Mar, 2016 8 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.5: - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780 - Fix build with DEBUG_ZBOOT and MACH_JZ4780 - Fix issue with uninitialised temp_foreign_map - Fix awk regex compile failure with certain versions of awk. At this time, the sole user, ld-ifversion, is only used on MIPS" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: smp.c: Fix uninitialised temp_foreign_map MIPS: Fix build error when SMP is used without GIC ld-version: Fix awk regex compile failure MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780 -
James Hogan authored
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map cpumask it uses the local variable temp_foreign_map without initialising it to zero. Since the calculation only ever sets bits in this cpumask any existing bits at that memory location will remain set and find their way into cpu_foreign_map too. This could potentially lead to cache operations suboptimally doing smp calls to multiple VPEs in the same core, even though the VPEs share primary caches. Therefore initialise temp_foreign_map using cpumask_clear() before use. Fixes: cccf34e9 ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12759/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Hauke Mehrtens authored
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also selected, otherwise it results in a compile error. smp-gic.c uses some functions from include/linux/irqchip/mips-gic.h like plat_ipi_call_int_xlate() which are only added to the header file when MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP. The calls top the functions from smp-gic.c are already protected by some #ifdefs The first part of this was introduced in commit 72e20142 ("MIPS: Move GIC IPI functions out of smp-cmp.c") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12774/Signed-off-by:
-
James Hogan authored
The ld-version.sh script fails on some versions of awk with the following error, resulting in build failures for MIPS: awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(') This is due to the regular expression ".*)", meant to strip off the beginning of the ld version string up to the close bracket, however brackets have a meaning in regular expressions, so lets escape it so that awk doesn't expect a corresponding open bracket. Fixes: ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion ...") Reported-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Michal Marek <mmarek@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/12838/Signed-off-by:
-
Aaro Koskinen authored
Ingenic SoC declares ZBOOT support, but debug definitions are missing for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set. The UART addresses are same as with JZ4740, so fix by covering JZ4780 with those as well. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12830/Signed-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block merge fix from Jens Axboe. This fixes the block segment counting bug and resulting sg overrun reported by Kent Overstreet, introduced with the last block pull. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't optimize for non-cloned bio in bio_get_last_bvec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "This fixes 3 FPU handling related bugs, an EFI boot crash and a runtime warning. The EFI fix arrived late but I didn't want to delay it to after v4.5 because the effects are pretty bad for the systems that are affected by it" [ Actually, I don't think the EFI fix really matters yet, because we haven't switched to the separate EFI page tables in mainline yet ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables x86/fpu: Fix eager-FPU handling on legacy FPU machines x86/delay: Avoid preemptible context checks in delay_mwaitx() x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off") x86/fpu: Fix 'no387' regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target bug fix from Nicholas Bellinger: "Here is an outstanding target-core bug-fix for v4.5 code." This patch addresses a recent Task Management (TMR) regression related to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5. It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within ABORT_TASK failure path, once a se_cmd descriptor has already completed posting response to fabric driver logic, and must be skipped during normal ABORT_TASK se_cmd->tag lookup" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect ABORT_TASK put for completed commands
-
- 12 Mar, 2016 5 commits
-
-
Ming Lei authored
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1] because the start postion may have been moved in the middle of the bvec, such as splitting in the middle of bvec. Fixes: 7bcd79ac(block: bio: introduce helpers to get the 1st and last bvec) Cc: stable@vger.kernel.org Reported-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Matt Fleming authored
Some machines have EFI regions in page zero (physical address 0x00000000) and historically that region has been added to the e820 map via trim_bios_range(), and ultimately mapped into the kernel page tables. It was not mapped via efi_map_regions() as one would expect. Alexis reports that with the new separate EFI page tables some boot services regions, such as page zero, are not mapped. This triggers an oops during the SetVirtualAddressMap() runtime call. For the EFI boot services quirk on x86 we need to memblock_reserve() boot services regions until after SetVirtualAddressMap(). Doing that while respecting the ownership of regions that may have already been reserved by the kernel was the motivation behind this commit: 7d68dc3f ("x86, efi: Do not reserve boot services regions within reserved areas") That patch was merged at a time when the EFI runtime virtual mappings were inserted into the kernel page tables as described above, and the trick of setting ->numpages (and hence the region size) to zero to track regions that should not be freed in efi_free_boot_services() meant that we never mapped those regions in efi_map_regions(). Instead we were relying solely on the existing kernel mappings. Now that we have separate page tables we need to make sure the EFI boot services regions are mapped correctly, even if someone else has already called memblock_reserve(). Instead of stashing a tag in ->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it generally makes no sense to mark a boot services region as required at runtime, it's pretty much guaranteed the firmware will not have already set this bit. For the record, the specific circumstances under which Alexis triggered this bug was that an EFI runtime driver on his machine was responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during SetVirtualAddressMap(). The event handler for this driver looks like this, sub rsp,0x28 lea rdx,[rip+0x2445] # 0xaa948720 mov ecx,0x4 call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720) mov r11,QWORD PTR [rip+0x2434] # 0xaa948720 xor eax,eax mov BYTE PTR [r11+0x1],0x1 add rsp,0x28 ret Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting instruction because ConvertPointer() was being called to convert the address 0x0000000000000000, which when converted is left unchanged and remains 0x0000000000000000. The output of the oops trace gave the impression of a standard NULL pointer dereference bug, but because we're accessing physical addresses during ConvertPointer(), it wasn't. EFI boot services code is stored at that address on Alexis' machine. Reported-by:
Alexis Murzeau <amurzeau@gmail.com> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raphael Hertzog <hertzog@debian.org> Cc: Roger Shimizu <rogershimizu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125Signed-off-by:
-
Borislav Petkov authored
i486 derived cores like Intel Quark support only the very old, legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and our FPU code wasn't handling the saving and restoring there properly in the 'eagerfpu' case. So after we made eagerfpu the default for all CPU types: 58122bf1 x86/fpu: Default eagerfpu=on on all CPUs these old FPU designs broke. First, Andy Shevchenko reported a splat: WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160 which was us trying to execute FXRSTOR on those machines even though they don't support it. After taking care of that, Bryan O'Donoghue reported that a simple FPU test still failed because we weren't initializing the FPU state properly on those machines. Take care of all that. Reported-and-tested-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnicSigned-off-by:
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Late MTD fix for v4.5: - A simple error code handling fix for the NAND ECC test; this was a regression in v4.5-rc1 - A MAINTAINERS update, which might as well go in ASAP" * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd: MAINTAINERS: add a maintainer for the NAND subsystem mtd: nand: tests: fix regression introduced in mtd_nandectest -
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm/i915 fixes from Dave Airlie: "Just two i915 regression fixes, that should be it from me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Actually retry with bit-banging after GMBUS timeout drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
-
