- 08 Jul, 2020 15 commits
-
-
Lihong Kou authored
In the f2fs_unlink we do not add trace end for some error paths, just add. Signed-off-by: Lihong Kou <koulihong@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
In f2fs_write_raw_pages(), we need to check page dirty status before writeback, because there could be a racer (e.g. reclaimer) helps writebacking the dirty page. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Wang Xiaojun authored
The parameter compr is unused in the f2fs_cluster_blocks function so we no longer need to pass it as a parameter. Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
to show f2fs_fiemap()'s result as below: f2fs_fiemap: dev = (251,0), ino = 7, lblock:0, pblock:1625292800, len:2097152, flags:0, ret:0 Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
to show f2fs_bmap()'s result as below: f2fs_bmap: dev = (251,0), ino = 7, lblock:0, pblock:396800 Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
If compression is disable, we should return zero rather than -EOPNOTSUPP to indicate f2fs_bmap() is not supported. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Liu Song authored
In current version, @state will only be FREE_NID. This parameter has no real effect so remove it to keep clean. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Liu Song authored
stakable/stackable Signed-off-by: Liu Song <fishland@aliyun.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Filesystem including f2fs should support stable page for special device like software raid, however there is one missing path that page could be updated while it is writeback state as below, fix this. - gc_node_segment - f2fs_move_node_page - __write_node_page - set_page_writeback - do_read_inode - f2fs_init_extent_tree - __f2fs_init_extent_tree i_ext->len = 0; Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
- Add to account and show per-log dirty_seg, full_seg and valid_blocks in debugfs. - reformat printed info. TYPE segno secno zoneno dirty_seg full_seg valid_blk - COLD data: 1523 1523 1523 1 0 399 - WARM data: 769 769 769 20 255 133098 - HOT data: 767 767 767 9 0 167 - Dir dnode: 22 22 22 3 0 70 - File dnode: 722 722 722 14 10 6505 - Indir nodes: 2 2 2 1 0 3 Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Qilong Zhang authored
When f2fs_ioc_gc_range performs multiple segments gc ops, the return value of f2fs_ioc_gc_range is determined by the last segment gc ops. If its ops failed, the f2fs_ioc_gc_range will be considered to be failed despite some of previous segments gc ops succeeded. Therefore, so we fix: Redefine the return value of getting victim ops and add exception handle for f2fs_gc. In particular, 1).if target has no valid block, it will go on. 2).if target sectoion has valid block(s), but it is current section, we will reminder the caller. Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Use validation of @fio to inidcate whether caller want to serialize IOs in io.io_list or not, then @add_list will be redundant, remove it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
- to avoid race between checkpoint and quota file writeback, it just needs to hold read lock of node_write in writeback path. - node_write lock has covered all LFS data write paths, it's not necessary, we only need to hold node_write lock at write path of quota file. This refactors commit ca7f76e6 ("f2fs: fix wrong discard space"). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
There is one reserved special compression extension: '*', which could be set via 'compress_extension="*"' mount option to enable compression for all files. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
to avoid polluting global symbol namespace. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
- 18 Jun, 2020 6 commits
-
-
Wang Xiaojun authored
Use kfree() instead of kvfree() to free variables allocated by match_strdup(). Because the memory is allocated with kmalloc inside match_strdup(). Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Jack Qiu authored
Assume each section has 4 segment: .___________________________. |_Segment0_|_..._|_Segment3_| . . . . .__________. |_section0_| Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks. It will fail if we want to gc section0 in this scenes, because all 4 segments in section0 is not dirty. So we should use dirty section bitmap instead of dirty segment bitmap to get right victim section. Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Wuyun Zhao authored
Under some condition, the __write_node_page will submit a page which is not f2fs_in_warm_node_list and will not call f2fs_add_fsync_node_entry. f2fs_gc continue to run to invoke f2fs_iget -> do_read_inode to read the same node page and set code node, which make f2fs_in_warm_node_list become true, that will cause f2fs_bug_on in f2fs_del_fsync_node_entry when f2fs_write_end_io called. - f2fs_write_end_io - f2fs_iget - do_read_inode - set_cold_node recover cold node flag - f2fs_in_warm_node_list - is_cold_node if node is cold, assume we have added node to fsync_node_list during writepages() - f2fs_del_fsync_node_entry - f2fs_bug_on() due to node page is not in fsync_node_list [ 34.966133] Call trace: [ 34.969902] f2fs_del_fsync_node_entry+0x100/0x108 [ 34.976071] f2fs_write_end_io+0x1e0/0x288 [ 34.981539] bio_endio+0x248/0x270 [ 34.986289] blk_update_request+0x2b0/0x4d8 [ 34.991841] scsi_end_request+0x40/0x440 [ 34.997126] scsi_io_completion+0xa4/0x748 [ 35.002593] scsi_finish_command+0xdc/0x110 [ 35.008143] scsi_softirq_done+0x118/0x150 [ 35.013610] blk_done_softirq+0x8c/0xe8 [ 35.018811] __do_softirq+0x2e8/0x578 [ 35.023828] irq_exit+0xfc/0x120 [ 35.028398] handle_IPI+0x1d8/0x330 [ 35.033233] gic_handle_irq+0x110/0x1d4 [ 35.038433] el1_irq+0xb4/0x130 [ 35.042917] kmem_cache_alloc+0x3f0/0x418 [ 35.048288] radix_tree_node_alloc+0x50/0xf8 [ 35.053933] __radix_tree_create+0xf8/0x188 [ 35.059484] __radix_tree_insert+0x3c/0x128 [ 35.065035] add_gc_inode+0x90/0x118 [ 35.069967] f2fs_gc+0x1b80/0x2d70 [ 35.074718] f2fs_disable_checkpoint+0x94/0x1d0 [ 35.080621] f2fs_fill_super+0x10c4/0x1b88 [ 35.086088] mount_bdev+0x194/0x1e0 [ 35.090923] f2fs_mount+0x40/0x50 [ 35.095589] mount_fs+0xb4/0x190 [ 35.100159] vfs_kern_mount+0x80/0x1d8 [ 35.105260] do_mount+0x478/0xf18 [ 35.109926] ksys_mount+0x90/0xd0 [ 35.114592] __arm64_sys_mount+0x24/0x38 Signed-off-by: Wuyun Zhao <zhaowuyun@wingtech.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Wei Fang authored
Since offset < new_size, no need to do truncate_pagecache() again with new_size. Signed-off-by: Wei Fang <fangwei1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Denis Efremov authored
Use kfree() instead of kvfree() to free super in read_raw_super_block() because the memory is allocated with kzalloc() in the function. Use kfree() instead of kvfree() to free sbi, raw_super in f2fs_fill_super() and f2fs_put_super() because the memory is allocated with kzalloc(). Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
Jaegeuk Kim authored
ERROR:INITIALISED_STATIC: do not initialise statics to NULL Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-
- 11 Jun, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull epoll update from Al Viro: "epoll conversion to read_iter from Jens; I thought there might be more epoll stuff this cycle, but uaccess took too much time" * 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: eventfd: convert to f_op->read_iter()
-
- 10 Jun, 2020 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of trivial patches that fell through the cracks last cycle" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: fix indentation in deactivate_super() vfs: Remove duplicated d_mountpoint check in __is_local_mountpoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull sysctl fixes from Al Viro: "Fixups to regressions in sysctl series" * 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysctl: reject gigantic reads/write to sysctl files cdrom: fix an incorrect __user annotation on cdrom_sysctl_info trace: fix an incorrect __user annotation on stack_trace_sysctl random: fix an incorrect __user annotation on proc_do_entropy net/sysctl: remove leftover __user annotations on neigh_proc_dointvec* net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull i915 uaccess updates from Al Viro: "Low-hanging fruit in i915; there are several trickier followups, but that'll wait for the next cycle" * 'uaccess.i915' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: i915:get_engines(): get rid of pointless access_ok() i915: alloc_oa_regs(): get rid of pointless access_ok() i915 compat ioctl(): just use drm_ioctl_kernel() i915: switch copy_perf_config_registers_or_number() to unsafe_put_user() i915: switch query_{topology,engine}_info() to copy_to_user()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc uaccess updates from Al Viro: "Assorted uaccess patches for this cycle - the stuff that didn't fit into thematic series" * 'uaccess.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bpf: make bpf_check_uarg_tail_zero() use check_zeroed_user() x86: kvm_hv_set_msr(): use __put_user() instead of 32bit __clear_user() user_regset_copyout_zero(): use clear_user() TEST_ACCESS_OK _never_ had been checked anywhere x86: switch cp_stat64() to unsafe_put_user() binfmt_flat: don't use __put_user() binfmt_elf_fdpic: don't use __... uaccess primitives binfmt_elf: don't bother with __{put,copy_to}_user() pselect6() and friends: take handling the combined 6th/7th args into helper
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull proc fix from Eric Biederman: "Syzbot found a NULL pointer dereference if kzalloc of s_fs_info fails" * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: s_fs_info may be NULL when proc_kill_sb is called
-
git://git.kernel.org/pub/scm/linux/kernel/git/will/linuxLinus Torvalds authored
Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
-
Andrew Morton authored
Fixes: e05c7b1f ("mm: pgtable: add shortcuts for accessing kernel PMD and PTE") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull more documentation updates from Jonathan Corbet: "A handful of late-arriving docs fixes, along with a patch changing a lot of HTTP links to HTTPS that had to be yanked and redone before the first pull" * tag 'docs-5.8-2' of git://git.lwn.net/linux: docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource() Replace HTTP links with HTTPS ones: documentation docs: it_IT: address invalid reference warnings doc: zh_CN: use doc reference to resolve undefined label warning docs: Update the location of the LF NDA program docs: dev-tools: coccinelle: underlines
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Update the ACPICA code in the kernel to upstream revision 20200528 with the following changes: - Remove some dead code from the acpidump utility (Bob Moore) - Add new OperationRegion subtype keyword PlatformRtMechanism to the compiler (Erik Kaneda)" * tag 'acpi-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Update version to 20200528 ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism ACPICA: acpidump: Removed dead code from oslinuxtbl.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS269A capacitive touch controller - a new driver for the Cypress CY8CTMA140 touchscreen - updates to Elan and ft5x06 touchscreen drivers - assorted driver fixes - msm-vibrator has been removed as we have a more generic solution * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: adi - work around module name confict Input: iqs269a - add missing I2C dependency Input: elants - refactor elants_i2c_execute_command() Input: elants - override touchscreen info with DT properties Input: elants - remove unused axes Input: add support for Azoteq IQS269A dt-bindings: input: Add bindings for Azoteq IQS269A Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups Input: remove msm-vibrator driver dt-bindings: Input: remove msm-vibrator Input: elants_i2c - provide an attribute to show calibration count Input: introduce input_mt_report_slot_inactive() dt-bindings: input: touchscreen: elants_i2c: convert to YAML Input: add driver for the Cypress CY8CTMA140 touchscreen dt-bindings: touchscreen: Add CY8CTMA140 bindings Input: edt-ft5x06 - prefer asynchronous probe Input: edt-ft5x06 - improve power management operations Input: edt-ft5x06 - move parameter restore into helper Input: edt-ft5x06 - fix get_default register write access Input: atkbd - receive and use physcode->keycode mapping from FW ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: - virtio-mem: paravirtualized memory hotplug - support doorbell mapping for vdpa - config interrupt support in ifc - fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits) vhost/test: fix up after API change virtio_mem: convert device block size into 64bit virtio-mem: drop unnecessary initialization ifcvf: implement config interrupt in IFCVF vhost: replace -1 with VHOST_FILE_UNBIND in ioctls vhost_vdpa: Support config interrupt in vdpa ifcvf: ignore continuous setting same status value virtio-mem: Don't rely on implicit compiler padding for requests virtio-mem: Try to unplug the complete online memory block first virtio-mem: Use -ETXTBSY as error code if the device is busy virtio-mem: Unplug subblocks right-to-left virtio-mem: Drop manual check for already present memory virtio-mem: Add parent resource for all added "System RAM" virtio-mem: Better retry handling virtio-mem: Offline and remove completely unplugged memory blocks mm/memory_hotplug: Introduce offline_and_remove_memory() virtio-mem: Allow to offline partially unplugged memory blocks mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE virtio-mem: Paravirtualized memory hotunplug part 2 virtio-mem: Paravirtualized memory hotunplug part 1 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: - Use fdatasync() in ubd - Add a generic "fd" vector transport - Minor cleanups and fixes * tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: virtio: Replace zero-length array with flexible-array um: Use fdatasync() when mapping the UBD FSYNC command um: Do not evaluate compiler's library path when cleaning um: Neaten vu_err macro definition um: Add a generic "fd" vector transport um: Add include: memset() and memcpy() are in <string.h>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull UBI update from Richard Weinberger: "This contains a single change for UBI: - Select fastmap anchor PEBs considering wear level rules" * tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Select fastmap anchor PEBs considering wear level rules
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...
-
Alexey Gladkov authored
syzbot found that proc_fill_super() fails before filling up sb->s_fs_info, deactivate_locked_super() will be called and sb->s_fs_info will be NULL. The proc_kill_sb() does not expect fs_info to be NULL which is wrong. Link: https://lore.kernel.org/lkml/0000000000002d7ca605a7b8b1c5@google.com Reported-by: syzbot+4abac52934a48af5ff19@syzkaller.appspotmail.com Fixes: fa10fed3 ("proc: allow to mount many instances of proc in one pid namespace") Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...
-