- 16 Aug, 2024 9 commits
-
-
Vladimir Oltean authored
xfail_on_veth() for this test is an incorrect approximation which gives false positives and false negatives. When local_termination fails with "reception succeeded, but should have failed", it is because the DUT ($h2) accepts packets even when not configured as promiscuous. This is not something specific to veth; even the bridge behaves that way, but this is not captured by the xfail_on_veth test. The IFF_UNICAST_FLT flag is not explicitly exported to user space, but it can somewhat be determined from the interface's behavior. We have to create a macvlan upper with a different MAC address. This forces a dev_uc_add() call in the kernel. When the unicast filtering list is not empty, but the device doesn't support IFF_UNICAST_FLT, __dev_set_rx_mode() force-enables promiscuity on the interface, to ensure correct behavior (that the requested address is received). We can monitor the change in the promiscuity flag and infer from it whether the device supports unicast filtering. There is no equivalent thing for allmulti, unfortunately. We never know what's hiding behind a device which has allmulti=off. Whether it will actually perform RX multicast filtering of unknown traffic is a strong "maybe". The bridge driver, for example, completely ignores the flag. We'll have to keep the xfail behavior, but instead of XFAIL on just veth, always XFAIL. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Add more coverage to the local termination selftest as follows: - 8021q upper of $h2 - 8021q upper of $h2, where $h2 is a port of a VLAN-unaware bridge - 8021q upper of $h2, where $h2 is a port of a VLAN-aware bridge - 8021q upper of VLAN-unaware br0, which is the upper of $h2 - 8021q upper of VLAN-aware br0, which is the upper of $h2 Especially the cases with traffic sent through the VLAN upper of a VLAN-aware bridge port will be immediately relevant when we will start transmitting PTP packets as an additional kind of traffic. Signed-off-by:
-
Vladimir Oltean authored
The current bridge() test is for packet reception on a VLAN-unaware bridge. Some things are different enough with VLAN-aware bridges that it's worth renaming this test into vlan_unaware_bridge(), and add a new vlan_aware_bridge() test. The two will share the same implementation: bridge() becomes a common function, which receives $vlan_filtering as an argument. Rename it to test_bridge() at the same time, because just bridge() pollutes the global namespace and we cannot invoke the binary with the same name from the iproute2 package currently. Signed-off-by:
-
Vladimir Oltean authored
There are upcoming tests which verify the RX filtering of a bridge (or bridge port), but under differing vlan_filtering conditions. Since we currently print $h2 (the DUT) in the log_test() output, it becomes necessary to make a further distinction between tests, to not give the user the impression that the exact same thing is run twice. Signed-off-by:
-
Vladimir Oltean authored
In future changes we will want to subject the DUT, $h2, to additional VLAN-tagged traffic. For that, we need to run the tests using $h1.100 as a sending interface, rather than the currently hardcoded $h1. Add a parameter to run_test() and modify its 2 callers to explicitly pass $h1, as was implicit before. Signed-off-by:
-
Vladimir Oltean authored
This will be used in other subtests as well; make new macvlan_create() and macvlan_destroy() functions. Signed-off-by:
-
Jakub Kicinski authored
tools/testing/selftests/drivers/net/ is not listed under networking entries. Add it to NETWORKING DRIVERS. Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240814142832.3473685-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pavan Chebbi authored
The driver currently blindly deletes its cache of RSS cotexts and ntuple filters when the ethtool channel count is changing. It also deletes the ntuple filters cache when the default indirection table is changing. The core will not allow ethtool channels to drop below any that have been configured as ntuple destinations since this commit from 2022: 47f3ecf4 ("ethtool: Fail number of channels change when it conflicts with rxnfc") So there is absolutely no need to delete the ntuple filters and RSS contexts when changing ethtool channels. It is also unnecessary to delete ntuple filters when the default RSS indirection table is changing. Remove bnxt_clear_usr_fltrs() and bnxt_clear_rss_ctxis() from the ethtool ops and change them to static functions. This bug will cause confusion to the end user and causes failure when running the rss_ctx.py selftest. Fixes: 1018319f ("bnxt_en: Invalidate user filters when needed") Reported-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240814225429.199280-1-michael.chan@broadcom.comSigned-off-by:
-
Jiri Pirko authored
During suspend/resume the following BUG was hit: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: bluetooth ecdh_generic ecc libaes CPU: 1 PID: 1282 Comm: rtcwake Not tainted 6.10.0-rc3-00732-gc8bd1f7f #15240 Hardware name: Generic DT based system PC is at dql_completed+0x270/0x2cc LR is at __free_old_xmit+0x120/0x198 pc : [<c07ffa54>] lr : [<c0c42bf4>] psr: 80000013 ... Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 43a4406a DAC: 00000051 ... Process rtcwake (pid: 1282, stack limit = 0xfbc21278) Stack: (0xe0805e80 to 0xe0806000) ... Call trace: dql_completed from __free_old_xmit+0x120/0x198 __free_old_xmit from free_old_xmit+0x44/0xe4 free_old_xmit from virtnet_poll_tx+0x88/0x1b4 virtnet_poll_tx from __napi_poll+0x2c/0x1d4 __napi_poll from net_rx_action+0x140/0x2b4 net_rx_action from handle_softirqs+0x11c/0x350 handle_softirqs from call_with_stack+0x18/0x20 call_with_stack from do_softirq+0x48/0x50 do_softirq from __local_bh_enable_ip+0xa0/0xa4 __local_bh_enable_ip from virtnet_open+0xd4/0x21c virtnet_open from virtnet_restore+0x94/0x120 virtnet_restore from virtio_device_restore+0x110/0x1f4 virtio_device_restore from dpm_run_callback+0x3c/0x100 dpm_run_callback from device_resume+0x12c/0x2a8 device_resume from dpm_resume+0x12c/0x1e0 dpm_resume from dpm_resume_end+0xc/0x18 dpm_resume_end from suspend_devices_and_enter+0x1f0/0x72c suspend_devices_and_enter from pm_suspend+0x270/0x2a0 pm_suspend from state_store+0x68/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1cc kernfs_fop_write_iter from vfs_write+0x2b0/0x3dc vfs_write from ksys_write+0x5c/0xd4 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe8bf1fa8 to 0xe8bf1ff0) ... ---[ end trace 0000000000000000 ]--- After virtnet_napi_enable() is called, the following path is hit: __napi_poll() -> virtnet_poll() -> virtnet_poll_cleantx() -> netif_tx_wake_queue() That wakes the TX queue and allows skbs to be submitted and accounted by BQL counters. Then netdev_tx_reset_queue() is called that resets BQL counters and eventually leads to the BUG in dql_completed(). Move virtnet_napi_tx_enable() what does BQL counters reset before RX napi enable to avoid the issue. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/e632e378-d019-4de7-8f13-07c572ab37a9@samsung.com/ Fixes: c8bd1f7f ("virtio_net: add support for Byte Queue Limits") Tested-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240814122500.1710279-1-jiri@resnulli.usSigned-off-by:
-
- 15 Aug, 2024 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter Current release - regressions: - udp: fall back to software USO if IPv6 extension headers are present - wifi: iwlwifi: correctly lookup DMA address in SG table Current release - new code bugs: - eth: mlx5e: fix queue stats access to non-existing channels splat Previous releases - regressions: - eth: mlx5e: take state lock during tx timeout reporter - eth: mlxbf_gige: disable RX filters until RX path initialized - eth: igc: fix reset adapter logics when tx mode change Previous releases - always broken: - tcp: update window clamping condition - netfilter: - nf_queue: drop packets with cloned unconfirmed conntracks - nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests - vsock: fix recursive ->recvmsg calls - dsa: vsc73xx: fix MDIO bus access and PHY opera - eth: gtp: pull network headers in gtp_dev_xmit() - eth: igc: fix packet still tx after gate close by reducing i226 MAC retry buffer - eth: mana: fix RX buf alloc_size alignment and atomic op panic - eth: hns3: fix a deadlock problem when config TC during resetting" * tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: hns3: use correct release function during uninitialization net: hns3: void array out of bound when loop tnl_num net: hns3: fix a deadlock problem when config TC during resetting net: hns3: use the user's cfg after reset net: hns3: fix wrong use of semaphore up selftests: net: lib: kill PIDs before del netns pse-core: Conditionally set current limit during PI regulator registration net: thunder_bgx: Fix netdev structure allocation net: ethtool: Allow write mechanism of LPL and both LPL and EPL vsock: fix recursive ->recvmsg calls selftest: af_unix: Fix kselftest compilation warnings netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests netfilter: nf_tables: Introduce nf_tables_getobj_single netfilter: nf_tables: Audit log dump reset after the fact selftests: netfilter: add test for br_netfilter+conntrack+queue combination netfilter: nf_queue: drop packets with cloned unconfirmed conntracks netfilter: flowtable: initialise extack before use netfilter: nfnetlink: Initialise extack before use in ACKs netfilter: allow ipv6 fragments to arrive on different devices tcp: Update window clamping condition ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Two regression fixes: - fix atomisp support for ISP2400 - fix dvb-usb regression for TeVii s480 dual DVB-S2 S660 board" * tag 'media/v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: atomisp: Fix streaming no longer working on BYT / ISP2400 devices media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata fix from Niklas Cassel: - Revert a recent change to sense data generation. Sense data can be in either fixed format or descriptor format. The D_SENSE bit in the Control mode page controls which format to generate. All places but one respected the D_SENSE bit. The recent change fixed the one place that didn't respect the D_SENSE bit. However, it turns out that hdparm, hddtemp and udisks (incorrectly) assumes sense data in descriptor format. Therefore, even while the change was technically correct, revert it, since even if these user space programs are fixed to (correctly) look at the format type before parsing the data, older versions of these tools will be around roughly forever. * tag 'ata-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag reasm, from Tom Hughes. 2) Initialize extack for begin/end netlink message marker in batch, from Donald Hunter. 3) Initialize extack for flowtable offload support, also from Donald. 4) Dropped packets with cloned unconfirmed conntracks in nfqueue, later it should be possible to explore lookup after reinject but Florian prefers this approach at this stage. From Florian Westphal. 5) Add selftest for cloned unconfirmed conntracks in nfqueue for previous update. 6) Audit after filling netlink header successfully in object dump, from Phil Sutter. 7-8) Fix concurrent dump and reset which could result in underflow counter / quota objects. netfilter pull request 24-08-15 * tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests netfilter: nf_tables: Introduce nf_tables_getobj_single netfilter: nf_tables: Audit log dump reset after the fact selftests: netfilter: add test for br_netfilter+conntrack+queue combination netfilter: nf_queue: drop packets with cloned unconfirmed conntracks netfilter: flowtable: initialise extack before use netfilter: nfnetlink: Initialise extack before use in ACKs netfilter: allow ipv6 fragments to arrive on different devices ==================== Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.orgSigned-off-by:Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://patch.msgid.link/20240813141024.1707252-1-shaojijie@huawei.comSigned-off-by:
-
Peiyang Wang authored
pci_request_regions is called to apply for PCI I/O and memory resources when the driver is initialized, Therefore, when the driver is uninstalled, pci_release_regions should be used to release PCI I/O and memory resources instead of pci_release_mem_regions is used to release memory reasouces only. Signed-off-by:
Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Signed-off-by:
-
Peiyang Wang authored
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array Signed-off-by:
-
Jie Wang authored
When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:Jie Wang <wangjie125@huawei.com> Signed-off-by:
-
Peiyang Wang authored
Consider the followed case that the user change speed and reset the net interface. Before the hw change speed successfully, the driver get old old speed from hw by timer task. After reset, the previous speed is config to hw. As a result, the new speed is configed successfully but lost after PF reset. The followed pictured shows more dirrectly. +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool -s 100G | | +------------------>| set speed 100G | | +--------------------->| | | set successfully | | |<---------------------+---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 200G | | changing event | ethtool --reset |<---------------------+ | (100G) +------------------>| cfg previous speed |<--+ | | after reset (200G) | | +--------------------->| | | +---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 100G | | changing event | |<---------------------+ | (200G) | | |<--+ | |query cfg (timer task)| | +--------------------->| | | return 200G | | |<---------------------+ | | | v v v This patch save new speed if hw change speed successfully, which will be used after reset successfully. Fixes: 2d03eacc ("net: hns3: Only update mac configuation when necessary") Signed-off-by: -
Jie Wang authored
Currently, if hns3 PF or VF FLR reset failed after five times retry, the reset done process will directly release the semaphore which has already released in hclge_reset_prepare_general. This will cause down operation fail. So this patch fixes it by adding reset state judgement. The up operation is only called after successful PF FLR reset. Fixes: 8627bded ("net: hns3: refactor the precedure of PF FLR") Fixes: f28368bb ("net: hns3: refactor the procedure of VF FLR") Signed-off-by:
-
Matthieu Baerts (NGI0) authored
When deleting netns, it is possible to still have some tasks running, e.g. background tasks like tcpdump running in the background, not stopped because the test has been interrupted. Before deleting the netns, it is then safer to kill all attached PIDs, if any. That should reduce some noises after the end of some tests, and help with the debugging of some issues. That's why this modification is seen as a "fix". Fixes: 25ae948b ("selftests/net: add lib.sh") Acked-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.orgSigned-off-by:
-
Oleksij Rempel authored
Fix an issue where `devm_regulator_register()` would fail for PSE controllers that do not support current limit control, such as simple GPIO-based controllers like the podl-pse-regulator. The `REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now conditionally set only if the `pi_set_current_limit` operation is supported. This change prevents the regulator registration routine from attempting to call `pse_pi_set_current_limit()`, which would return `-EOPNOTSUPP` and cause the registration to fail. Fixes: 4a83abce ("net: pse-pd: Add new power limit get and set c33 features") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Kory Maincent <kory.maincent@bootlin.com> Tested-by:
Kyle Swenson <kyle.swenson@est.tech> Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.deSigned-off-by:
-
Marc Zyngier authored
Commit 94833add ("net: thunderx: Unembed netdev structure") had a go at dynamically allocating the netdev structures for the thunderx_bgx driver. This change results in my ThunderX box catching fire (to be fair, it is what it does best). The issues with this change are that: - bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and bgx_init_of_phy(), both expecting netdev to be a valid pointer. - bgx_init_of_phy() populates the MAC addresses for *all* LMACs attached to a given BGX instance, and thus needs netdev for each of them to have been allocated. There is a few things to be said about how the driver mixes LMAC and BGX states which leads to this sorry state, but that's beside the point. To address this, go back to a situation where all netdev structures are allocated before the driver starts relying on them, and move the freeing of these structures to driver removal. Someone brave enough can always go and restructure the driver if they want. Fixes: 94833add ("net: thunderx: Unembed netdev structure") Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.orgSigned-off-by:
-
Danielle Ratson authored
CMIS 5.2 standard section 9.4.2 defines four types of firmware update supported mechanism: None, only LPL, only EPL, both LPL and EPL. Currently, only LPL (Local Payload) type of write firmware block is supported. However, if the module supports both LPL and EPL the flashing process wrongly fails for no supporting LPL. Fix that, by allowing the write mechanism to be LPL or both LPL and EPL. Fixes: c4f78134 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB") Reported-by:
Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com> Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.comSigned-off-by:
-
Cong Wang authored
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg(). Fixes: 634f1a71 ("vsock: support sockmap") Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com Cc: Bobby Eshleman <bobby.eshleman@bytedance.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:Cong Wang <cong.wang@bytedance.com> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.11 We have few fixes to drivers. The most important here is a fix for iwlwifi which caused major slowdowns for several users. * tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: correctly lookup DMA address in SG table wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850 ==================== Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.orgSigned-off-by:
-
Abhinav Jain authored
Change expected_buf from (const void *) to (const char *) in function __recvpair(). This change fixes the below warnings during test compilation: ``` In file included from msg_oob.c:14: msg_oob.c: In function ‘__recvpair’: ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’ ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’ ``` Fixes: d098d772 ("selftest: af_unix: Add msg_oob.c.") Signed-off-by:
Abhinav Jain <jain.abhinav177@gmail.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - extend tree-checker verification of directory item type - fix regression in page/folio and extent state tracking in xarray, the dirty status can get out of sync and can cause problems e.g. a hang - in send, detect last extent and allow to clone it instead of sending it as write, reduces amount of data transferred in the stream - fix checking extent references when cleaning deleted subvolumes - fix one more case in the extent map shrinker, let it run only in the kswapd context so it does not cause latency spikes during other operations * tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix invalid mapping of extent xarray state btrfs: send: allow cloning non-aligned extent if it ends at i_size btrfs: only run the extent map shrinker from kswapd tasks btrfs: tree-checker: reject BTRFS_FT_UNKNOWN dir type btrfs: check delayed refs when we're checking if a ref exists
-
- 14 Aug, 2024 13 commits
-
-
Phil Sutter authored
Objects' dump callbacks are not concurrency-safe per-se with reset bit set. If two CPUs perform a reset at the same time, at least counter and quota objects suffer from value underrun. Prevent this by introducing dedicated locking callbacks for nfnetlink and the asynchronous dump handling to serialize access. Fixes: 43da04a5 ("netfilter: nf_tables: atomic dump and reset for stateful objects") Signed-off-by:
Phil Sutter <phil@nwl.cc> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Phil Sutter authored
Outsource the reply skb preparation for non-dump getrule requests into a distinct function. Prep work for object reset locking. Signed-off-by:
-
Phil Sutter authored
In theory, dumpreset may fail and invalidate the preceeding log message. Fix this and use the occasion to prepare for object reset locking, which benefits from a few unrelated changes: * Add an early call to nfnetlink_unicast if not resetting which effectively skips the audit logging but also unindents it. * Extract the table's name from the netlink attribute (which is verified via earlier table lookup) to not rely upon validity of the looked up table pointer. * Do not use local variable family, it will vanish. Fixes: 8e6cf365 ("audit: log nftables configuration change events") Signed-off-by:
-
Florian Westphal authored
Trigger cloned skbs leaving softirq protection. This triggers splat without the preceeding change ("netfilter: nf_queue: drop packets with cloned unconfirmed conntracks"): WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm.. because local delivery and forwarding will race for confirmation. Based on a reproducer script from Yi Chen. Signed-off-by: -
Florian Westphal authored
Conntrack assumes an unconfirmed entry (not yet committed to global hash table) has a refcount of 1 and is not visible to other cores. With multicast forwarding this assumption breaks down because such skbs get cloned after being picked up, i.e. ct->use refcount is > 1. Likewise, bridge netfilter will clone broad/mutlicast frames and all frames in case they need to be flood-forwarded during learning phase. For ip multicast forwarding or plain bridge flood-forward this will "work" because packets don't leave softirq and are implicitly serialized. With nfqueue this no longer holds true, the packets get queued and can be reinjected in arbitrary ways. Disable this feature, I see no other solution. After this patch, nfqueue cannot queue packets except the last multicast/broadcast packet. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Donald Hunter authored
Fix missing initialisation of extack in flow offload. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
-
Donald Hunter authored
Add missing extack initialisation when ACKing BATCH_BEGIN and BATCH_END. Fixes: bf2ac490 ("netfilter: nfnetlink: Handle ACK flags for batch messages") Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "s390: - Fix failure to start guests with kvm.use_gisa=0 - Panic if (un)share fails to maintain security. ARM: - Use kvfree() for the kvmalloc'd nested MMUs array - Set of fixes to address warnings in W=1 builds - Make KVM depend on assembler support for ARMv8.4 - Fix for vgic-debug interface for VMs without LPIs - Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest - Minor code / comment cleanups for configuring PAuth traps - Take kvm->arch.config_lock to prevent destruction / initialization race for a vCPU's CPUIF which may lead to a UAF x86: - Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX) - Fix smatch issues - Small cleanups - Make x2APIC ID 100% readonly - Fix typo in uapi constant Generic: - Use synchronize_srcu_expedited() on irqfd shutdown" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX) KVM: eventfd: Use synchronize_srcu_expedited() on shutdown KVM: selftests: Add a testcase to verify x2APIC is fully readonly KVM: x86: Make x2APIC ID 100% readonly KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id()) KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page() KVM: SVM: Fix an error code in sev_gmem_post_populate() KVM: SVM: Fix uninitialized variable bug KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list KVM: arm64: Tidying up PAuth code in KVM KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain s390/uv: Panic for set and remove shared access UVC errors KVM: s390: fix validity interception issue when gisa is switched off docs: KVM: Fix register ID of SPSR_FIQ KVM: arm64: vgic: fix unexpected unlock sparse warnings KVM: arm64: fix kdoc warnings in W=1 builds KVM: arm64: fix override-init warnings in W=1 builds ... -
Tom Hughes authored
Commit 264640fc ("ipv6: distinguish frag queues by device for multicast and link-local packets") modified the ipv6 fragment reassembly logic to distinguish frag queues by device for multicast and link-local packets but in fact only the main reassembly code limits the use of the device to those address types and the netfilter reassembly code uses the device for all packets. This means that if fragments of a packet arrive on different interfaces then netfilter will fail to reassemble them and the fragments will be expired without going any further through the filters. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Tom Hughes <tom@compton.nu> Signed-off-by:
-
Amit Shah authored
"INVALID" is misspelt in "SEV_RET_INAVLID_CONFIG". Since this is part of the UAPI, keep the current definition and add a new one with the fix. Fix-suggested-by:
Amit Shah <amit.shah@amd.com> Message-ID: <20240814083113.21622-1-amit@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't directly emulate instructions for ES/SNP, and instead the guest must explicitly request emulation. Unless the guest explicitly requests emulation without accessing memory, ES/SNP relies on KVM creating an MMIO SPTE, with the subsequent #NPF being reflected into the guest as a #VC. But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs, because except for ES/SNP, doing so requires setting reserved bits in the SPTE, i.e. the SPTE can't be readable while also generating a #VC on writes. Because KVM never creates MMIO SPTEs and jumps directly to emulation, the guest never gets a #VC. And since KVM simply resumes the guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU into an infinite #NPF loop if the vCPU attempts to write read-only memory. Disallow read-only memory for all VMs with protected state, i.e. for upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible to support read-only memory, as TDX uses EPT Violation #VE to reflect the fault into the guest, e.g. KVM could configure read-only SPTEs with RX protections and SUPPRESS_VE=0. But there is no strong use case for supporting read-only memslots on TDX, e.g. the main historical usage is to emulate option ROMs, but TDX disallows executing from shared memory. And if someone comes along with a legitimate, strong use case, the restriction can always be lifted for TDX. Don't bother trying to retroactively apply the restriction to SEV-ES VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't possibly work for SEV-ES, i.e. disallowing such memslots is really just means reporting an error to userspace instead of silently hanging vCPUs. Trying to deal with the ordering between KVM_SEV_INIT and memslot creation isn't worth the marginal benefit it would provide userspace. Fixes: 26c44aa9 ("KVM: SEV: define VM types for SEV and SEV-ES") Fixes: 1dfe571c ("KVM: SEV: Add initial SEV-SNP support") Cc: Peter Gonda <pgonda@google.com> Cc: Michael Roth <michael.roth@amd.com> Cc: Vishal Annapurve <vannapurve@google.com> Cc: Ackerly Tng <ackerleytng@google.com> Signed-off-by:Sean Christopherson <seanjc@google.com> Message-ID: <20240809190319.1710470-2-seanjc@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux fixes from Paul Moore: - Fix a xperms counting problem where we adding to the xperms count even if we failed to add the xperm. - Propogate errors from avc_add_xperms_decision() back to the caller so that we can trigger the proper cleanup and error handling. - Revert our use of vma_is_initial_heap() in favor of our older logic as vma_is_initial_heap() doesn't correctly handle the no-heap case and it is causing issues with the SELinux process/execheap access control. While the older SELinux logic may not be perfect, it restores the expected user visible behavior. Hopefully we will be able to resolve the problem with the vma_is_initial_heap() macro with the mm folks, but we need to fix this in the meantime. * tag 'selinux-pr-20240814' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: revert our use of vma_is_initial_heap() selinux: add the processing of the failure of avc_add_xperms_decision() selinux: fix potential counting error in avc_add_xperms_decision()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfsLinus Torvalds authored
Pull vfs fixes from Christian Brauner: "VFS: - Fix the name of file lease slab cache. When file leases were split out of file locks the name of the file lock slab cache was used for the file leases slab cache as well. - Fix a type in take_fd() helper. - Fix infinite directory iteration for stable offsets in tmpfs. - When the icache is pruned all reclaimable inodes are marked with I_FREEING and other processes that try to lookup such inodes will block. But some filesystems like ext4 can trigger lookups in their inode evict callback causing deadlocks. Ext4 does such lookups if the ea_inode feature is used whereby a separate inode may be used to store xattrs. Introduce I_LRU_ISOLATING which pins the inode while its pages are reclaimed. This avoids inode deletion during inode_lru_isolate() avoiding the deadlock and evict is made to wait until I_LRU_ISOLATING is done. netfs: - Fault in smaller chunks for non-large folio mappings for filesystems that haven't been converted to large folios yet. - Fix the CONFIG_NETFS_DEBUG config option. The config option was renamed a short while ago and that introduced two minor issues. First, it depended on CONFIG_NETFS whereas it wants to depend on CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter does. Second, the documentation for the config option wasn't fixed up. - Revert the removal of the PG_private_2 writeback flag as ceph is using it and fix how that flag is handled in netfs. - Fix DIO reads on 9p. A program watching a file on a 9p mount wouldn't see any changes in the size of the file being exported by the server if the file was changed directly in the source filesystem. Fix this by attempting to read the full size specified when a DIO read is requested. - Fix a NULL pointer dereference bug due to a data race where a cachefiles cookies was retired even though it was still in use. Check the cookie's n_accesses counter before discarding it. nsfs: - Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as the kernel is writing to userspace. pidfs: - Prevent the creation of pidfds for kthreads until we have a use-case for it and we know the semantics we want. It also confuses userspace why they can get pidfds for kthreads. squashfs: - Fix an unitialized value bug reported by KMSAN caused by a corrupted symbolic link size read from disk. Check that the symbolic link size is not larger than expected" * tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: Squashfs: sanity check symbolic link size 9p: Fix DIO read through netfs vfs: Don't evict inode under the inode lru traversing context netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag" file: fix typo in take_fd() comment pidfd: prevent creation of pidfds for kthreads netfs: clean up after renaming FSCACHE_DEBUG config libfs: fix infinite directory reads for offset dir nsfs: fix ioctl declaration fs/netfs/fscache_cookie: add missing "n_accesses" check filelock: fix name of file_lease slab cache netfs: Fault in smaller chunks for non-large folio mappings
-
