- 22 Jul, 2021 3 commits
-
-
Martin Kepplinger authored
Ultra HS-SD/MMC card reader devices establish a MEDIUM MAY HAVE CHANGED unit attention not only when the medium changes but also when resuming from suspend. Setting the BLIST_IGN_MEDIA_CHANGE flag permits using runtime PM for these readers. [mkp: renamed flag] Link: https://lore.kernel.org/r/20210704075403.147114-4-martin.kepplinger@puri.smReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Martin Kepplinger authored
For SD card reader devices that have the BLIST_IGN_MEDIA_CHANGE flag set, a MEDIUM MAY HAVE CHANGED unit attention is established after resuming from runtime suspend. Send a REQUEST SENSE to consume the UA. The "downside" is that for these devices we now rely on users to not change the medium (SD card) *during* a runtime suspend/resume cycle, i.e. when not unmounting. To enable runtime PM for an SD cardreader (device number 0:0:0:0), do: echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control [mkp: use scsi_device flag instead of poking at BLIST] Link: https://lore.kernel.org/r/20210704075403.147114-3-martin.kepplinger@puri.smReviewed-by:
-
Martin Kepplinger authored
Add a new flag for devices that erroneously establish MEDIUM MAY HAVE CHANGED unit attentions. Drivers can set this flag to make the SCSI layer ignore media change events during resume. [mkp: add "ignore" and add corresponding flag to struct scsi_device] Link: https://lore.kernel.org/r/20210704075403.147114-2-martin.kepplinger@puri.smReviewed-by:
-
- 21 Jul, 2021 10 commits
-
-
Jason Yan authored
libsas needs to include some header files in the scsi directory. However these are currently hardcoded with the path "../" in the C files. Do this in the Makefile to avoid hardcoding the path. Link: https://lore.kernel.org/r/20210716074551.771312-1-yanaijie@huawei.com Cc: John Garry <john.garry@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Martin K. Petersen authored
Use the scsi_get_lba() helper instead of a function internal to the SCSI disk driver. Remove #include "sd.h". Link: https://lore.kernel.org/r/20210609033929.3815-16-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
scsi_get_lba() confusingly returned the block layer sector number expressed in units of 512 bytes. Now that we have a more aptly named scsi_get_sector() function, make scsi_get_lba() return the actual LBA. Link: https://lore.kernel.org/r/20210609033929.3815-13-martin.petersen@oracle.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Bart Van Assche authored
Use scsi_get_sector() instead of scsi_get_lba() since the name of the latter is confusing. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210513223757.3938-3-bvanassche@acm.org Link: https://lore.kernel.org/r/20210609033929.3815-12-martin.petersen@oracle.comReviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since scsi_get_lba() returns a sector_t value instead of the LBA, the name of that function is confusing. Introduce an identical function scsi_get_sector(). Link: https://lore.kernel.org/r/20210513223757.3938-2-bvanassche@acm.org Link: https://lore.kernel.org/r/20210609033929.3815-11-martin.petersen@oracle.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Martin K. Petersen authored
It is useful for testing purposes to be able to inject errors by writing bad protection information to media with checking disabled and then attempting to read it back. Extend scsi_debug's PI verification logic to give the driver feature parity with commercially available drives. Almost all devices with PI capability support RDPROTECT and WRPROTECT values of 0, 1, and 3. Link: https://lore.kernel.org/r/20210609033929.3815-10-martin.petersen@oracle.comReviewed-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Martin K. Petersen authored
The function used to dump sectors containing protection information errors was useful during initial development over a decade ago. However, dump_sector() substantially slows down the system during testing due to writing an entire sector's worth of data to syslog on every error. We now log plenty of information about the nature of detected protection information errors throughout the stack. Dumping the entire contents of an offending sector is no longer needed. Link: https://lore.kernel.org/r/20210609033929.3815-9-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
Use scsi_prot_ref_tag() and scsi_prot_interval() instead scsi_get_lba() and sector_size. Link: https://lore.kernel.org/r/20210609033929.3815-7-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
We are about to remove the request pointer from struct scsi_cmnd and that will complicate getting to the ref_tag via t10_pi_ref_tag() in the various drivers. Introduce a helper function to retrieve the reference tag so drivers will not have to worry about the details. Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.comReviewed-by:
-
- 20 Jul, 2021 9 commits
-
-
Don Brace authored
Link: https://lore.kernel.org/r/20210714182847.50360-10-don.brace@microchip.comReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Mike McGowen authored
Correct driver's ISR accessing a data structure member that has not been fully initialized during driver initialization. The pqi queue groups can have uninitialized members when an interrupt fires. This has not resulted in any driver crashes. This was found during our own internal testing. No bugs were ever filed. Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.comReviewed-by:
-
Balsundar P authored
Add support for ZTE RM241-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5445 Add support for ZTE RM242-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5446 Add support for ZTE RM243-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5447 Add support for ZTE SDPSA/B-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B27 Add support for ZTE SDPSA/B_I-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B29 Add support for ZTE SDPSA/B_L-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B45 Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.comReviewed-by:Balsundar P <balsundar.p@microchip.com> Signed-off-by:
-
Mike McGowen authored
Add support for Norsi ntcom Raid-24i controller: VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161 Link: https://lore.kernel.org/r/20210714182847.50360-7-don.brace@microchip.comReviewed-by: -
Murthy Bhat authored
Report on SCSI command that has triggered the reset. Also add check for NULL SCSI commands resulting from issuing sg_reset when there is no outstanding commands. Example: sg_reset -d /dev/sgXY smartpqi 0000:39:00.0: resetting scsi 4:0:1:0 due to cmd 0x12 Link: https://lore.kernel.org/r/20210714182847.50360-6-don.brace@microchip.comReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Don Brace authored
Change Microsemi to Microchip. Link: https://lore.kernel.org/r/20210714182847.50360-5-don.brace@microchip.comReviewed-by:
Justin Lindley <Justin.lindley@microchip.com> Signed-off-by:
-
Don Brace authored
Change driver module macros to reflect copyright changes: Microsemi to Microchip. Link: https://lore.kernel.org/r/20210714182847.50360-4-don.brace@microchip.comReviewed-by:
-
Kevin Barnett authored
Updated copyright notices and company name strings to reflect Microchip ownership. Link: https://lore.kernel.org/r/20210714182847.50360-3-don.brace@microchip.comReviewed-by:
-
Mahesh Rajashekhara authored
Add support for H3C P4408-Ma-8i-2GB device ID: VID_9005, DID_028F, SVID_193D and SDID_1108 VID_9005, DID_028F, SVID_193D and SDID_1109 Link: https://lore.kernel.org/r/20210714182847.50360-2-don.brace@microchip.comReviewed-by:Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by:
-
- 19 Jul, 2021 18 commits
-
-
James Smart authored
Update copyrights for files modified by the 12.8.0.11 patch set. Link: https://lore.kernel.org/r/20210707184351.67872-21-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.8.0.11. Link: https://lore.kernel.org/r/20210707184351.67872-20-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
When a node moves to NPR state due to a device recovery event, the nlp_fc4_types in the node are cleared. An ADISC received for a node in the NPR state triggers an ADISC. Without fc4 types being known, the calls to register with the transport are no-op'd, thus no additional references are placed on the node by transport re-registrations. A subsequent RSCN could trigger another unregister request, which will decrement the reference counts, leading to the ref count hitting zero and the node being freed while futher discovery on the node is being attempted by the RSCN event handling. Fix by skipping the trigger of an ADISC when in NPR state. The normal ADISC process will kick off in the regular discovery path after receiving a response from name server. Link: https://lore.kernel.org/r/20210707184351.67872-19-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a situation where FLOGIs keep failing with firmware indicating an illegal command error code. This situation was preceded by an ADISC completion that was processed while the link was down. This path on SLI-3 performs a CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI completes, it's no longer in sync with the VPI state. In SLI-3 it is illegal to have an active VPI during FLOGI. Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and REG_VPI. The path will be taken after the FLOGI after the next Link Up. Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In the PLOGI and ADISC completion handling, the device removal event could be skipped during some link errors. This could leave a stale node in UNUSED state. Driver unload would hang for a long time waiting for this node to be freed. Resolve by taking the following steps: - Always post ADISC completion events to discovery state machine upon ADISC completion. - In case of a completion error for PLOGI/ADISC, ensure that init refcount is dropped if not registered with transport. Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state are moved to NPR state in order to revalidate the login. This triggers an immediate unregister from SCSI/NVMe backend. The assumption is that the node may be missing. The re-registration with the backend happens after either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or when ADISC completes successfully (rediscover with ADISC enabled). However, the NVMe-FC standard provides for an RSCN to be triggered when the remote port supports a discovery controller and there was a change of discovery log content. As the remote port typically also supports storage subsystems, this unregister causes all storage controller connections to fail and require reconnect. Correct by reworking the code to ensure that the unregistration only occurs when a login state is truly terminated, thereby leaving the NVMe storage controllers in place. The changes made are: - Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry. - Do not clear wwpn/wwnn values upon ADISC failure. - Move MAPPED nodes to NPR during RSCN processing, but do not unregister with transport. On GIDFT completion, identify missing nodes (not marked NLP_NPR_2B_DISC) and unregister them. - Perform unregistration for nodes that will go through ADISC processing if ADISC completion fails. - Successful ADISC completion will move node back to MAPPED state. Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Assign a default value of 1 to driver module parameter lpfc_use_adisc. Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The SLI4 interface changed the manner used to indicate PBDE support. Rework the driver to check for PBDE support via the PBDE feature bit in COMMON_GET_SLI4_PARAMETERS. Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Mailbox commands sent via ioctl/bsg from user applications may be interrupted from processing by a concurrently triggered PCI function reset. The command will not generate a completion due to the reset. This results in a user application hang waiting for the mailbox command to complete. Resolve by changing the function reset handler to detect that there was an outstanding mailbox command and simulate a mailbox completion. Add some additional debug when a mailbox command times out. Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to index the sli4_hba.rpi_ids[] array. In lpfc_offline_prep(), unreg rpi before freeing the rpi. Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Since the REG_LOGIN to the fabric controller happens in parallel with SCR, it may or may not be completed by the time RDF is sent. RDF and SCR are sent to the fabric in parallel, so checking for a completed REG_LOGIN in the RDF submit path is not needed. Remove the REG_LOGI check from the RDF submission path. Link: https://lore.kernel.org/r/20210707184351.67872-11-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The ELS job request structure, that is allocated while issuing ELS RDF/SCR request path, is not being released in an error path causing a memory leak message on driver unload. Free the ELS job structure in the error paths. Link: https://lore.kernel.org/r/20210707184351.67872-10-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
RDF ELS handling for NPIV ports may result in an incorrect NDLP reference count. In the event of a persistent link down, this may lead to premature release of an NDLP structure and subsequent NULL ptr dereference panic. Remove extraneous lpfc_nlp_put() call in NPIV port RDF processing. Link: https://lore.kernel.org/r/20210707184351.67872-9-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In the routine that generically cleans up an ELS after completion, the NDLP put is done prior to the freeing of the IOCB. The IOCB may reference the NDLP. Move the lpfc_nlp_put() after freeing the IOCB. Link: https://lore.kernel.org/r/20210707184351.67872-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Previous logic accidentally overrides the status variable to FAILURE when target reset status is SUCCESS. Refactor the non-SUCCESS logic of lpfc_vmid_vport_cleanup(), which resolves the false override. Link: https://lore.kernel.org/r/20210707184351.67872-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
If a LOGO is received for a node that is in the NPR state, post a DEVICE_RM event to allow clean up of the logged out node. Clearing the NLP_NPR_2B_DISC flag upon receipt of a LOGO ACC may cause skipping of processing outstanding PLOGIs triggered by parallel RSCN events. If an outstanding PLOGI is being retried and receipt of a LOGO ACC occurs, then allow the discovery state machine's PLOGI completion to clean up the node. Link: https://lore.kernel.org/r/20210707184351.67872-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Update comment headers for functions lpfc_vmid_cmd and lpfc_vmid_poll. Link: https://lore.kernel.org/r/20210707184351.67872-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Define additional status fields in mailbox commands to help provide additional information when downloading new firmware. Link: https://lore.kernel.org/r/20210707184351.67872-4-jsmart2021@gmail.comCo-developed-by:
-
