Sparse complains that taprio_destroy() dereferences q->oper_sched and
q->admin_sched without rcu_dereference(), since they are marked as __rcu
in the taprio private structure.

1671:28: warning: incorrect type in argument 1 (different address spaces)
1671:28:    expected struct callback_head *head
1671:28:    got struct callback_head [noderef] __rcu *
1674:28: warning: incorrect type in argument 1 (different address spaces)
1674:28:    expected struct callback_head *head
1674:28:    got struct callback_head [noderef] __rcu *

To silence that build warning, do actually use rtnl_dereference(), since
we know the rtnl_mutex is held at the time of q->destroy().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the writer-side lock is taken here, we do not need to open an RCU
read-side critical section, instead we can use rtnl_dereference() to
tell lockdep we are serialized with concurrent writes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The locking in taprio_offload_config_changed() is wrong (but also
inconsequentially so). The current_entry_lock does not serialize changes
to the admin and oper schedules, only to the current entry. In fact, the
rtnl_mutex does that, and that is taken at the time when taprio_change()
is called.

Replace the rcu_dereference_protected() method with the proper RCU
annotation, and drop the unnecessary spin lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
nfp: flower: police validation and ct enhancements

this series enhances the flower hardware offload
facility provided by the nfp driver.

1. Add validation of police actions created independently of flows

2. Add support offload of ct NAT action

3. Support offload of rule which has both vlan push/pop/mangle
   and ct action
====================

Link: https://lore.kernel.org/r/20220914160604.1740282-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Support hardware offload of rule which has both vlan push/pop/mangle
and ct action.
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

support ct nat action when pre_ct merge with post_ct
and nft. at the same time, add the extra checksum action
and hardware stats for nft to meet the action check when
do nat.
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Validation of police actions was added to offload drivers in
commit d97b4b10 ("flow_offload: reject offload for all drivers with
invalid police parameters")

This patch extends that validation in the nfp driver to include
police actions which are created independently of flows.
Signed-off-by: Ziyang Chen <ziyang.chen@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
tcp: Introduce optional per-netns ehash.

The more sockets we have in the hash table, the longer we spend looking
up the socket.  While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.

The root cause might be a single workload that consumes much more
resources than the others.  It often happens on a cloud service where
different workloads share the same computing resource.

On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.

 thash_entries		sockets		length		Gbps
	524288		      1		     1		50.7
			   24Mi		    48		45.1

It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.

 thash_entries		sockets		length		Gbps
        131072		      1		     1		50.7
			    1Mi		     8		49.9
			    2Mi		    16		48.9
			    4Mi		    32		47.3
			    8Mi		    64		44.6
			   16Mi		   128		40.6
			   24Mi		   192		36.3
			   32Mi		   256		32.5
			   40Mi		   320		27.0
			   48Mi		   384		25.0

To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.

With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours.  Also, we can reduce lock contention.

For details, please see the last patch.

  patch 1 - 4: prep for per-netns ehash
  patch     5: small optimisation for netns dismantle without TIME_WAIT sockets
  patch     6: add per-netns ehash

Many thanks to Eric Dumazet for reviewing and advising.
====================

Link: https://lore.kernel.org/r/20220908011022.45342-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The more sockets we have in the hash table, the longer we spend looking
up the socket.  While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.

The root cause might be a single workload that consumes much more
resources than the others.  It often happens on a cloud service where
different workloads share the same computing resource.

On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.

 thash_entries		sockets		length		Gbps
	524288		      1		     1		50.7
			   24Mi		    48		45.1

It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.

 thash_entries		sockets		length		Gbps
        131072		      1		     1		50.7
			    1Mi		     8		49.9
			    2Mi		    16		48.9
			    4Mi		    32		47.3
			    8Mi		    64		44.6
			   16Mi		   128		40.6
			   24Mi		   192		36.3
			   32Mi		   256		32.5
			   40Mi		   320		27.0
			   48Mi		   384		25.0

To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.

With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours.  In addition, we can reduce lock contention.

We can control the ehash size by a new sysctl knob.  However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0).  Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash.  The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.

We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries.  A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).

  # dmesg | cut -d ' ' -f 5- | grep "established hash"
  TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)

  # sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = 524288  # can be changed by thash_entries

  # sysctl net.ipv4.tcp_child_ehash_entries
  net.ipv4.tcp_child_ehash_entries = 0  # disabled by default

  # ip netns add test1
  # ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = -524288  # share the global ehash

  # sysctl -w net.ipv4.tcp_child_ehash_entries=100
  net.ipv4.tcp_child_ehash_entries = 100

  # ip netns add test2
  # ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
  net.ipv4.tcp_ehash_entries = 128  # own a per-netns ehash with 2^n buckets

When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:

  1) Share the global ehash and create per-netns ehash

  First, unshare() with tcp_child_ehash_entries==0.  It creates dedicated
  netns sysctl knobs where we can safely change tcp_child_ehash_entries
  and clone()/unshare() to create a per-netns ehash.

  2) Control write on sysctl by BPF

  We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
  sysctl knobs.

Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy.  By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node.  Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.

Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:

  tcp_max_tw_buckets  : tcp_child_ehash_entries / 2
  tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)

As a bonus, we can dismantle netns faster.  Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns.  Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.

With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.

In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

While destroying netns, we call inet_twsk_purge() in tcp_sk_exit_batch()
and tcpv6_net_exit_batch() for AF_INET and AF_INET6.  These commands
trigger the kernel to walk through the potentially big ehash twice even
though the netns has no TIME_WAIT sockets.

  # ip netns add test
  # ip netns del test

  or

  # unshare -n /bin/true >/dev/null

When tw_refcount is 1, we need not call inet_twsk_purge() at least
for the net.  We can save such unneeded iterations if all netns in
net_exit_list have no TIME_WAIT sockets.  This change eliminates
the tax by the additional unshare() described in the next patch to
guarantee the per-netns ehash size.

Tested:

  # mount -t debugfs none /sys/kernel/debug/
  # echo cleanup_net > /sys/kernel/debug/tracing/set_ftrace_filter
  # echo inet_twsk_purge >> /sys/kernel/debug/tracing/set_ftrace_filter
  # echo function > /sys/kernel/debug/tracing/current_tracer
  # cat ./add_del_unshare.sh
  for i in `seq 1 40`
  do
      (for j in `seq 1 100` ; do  unshare -n /bin/true >/dev/null ; done) &
  done
  wait;
  # ./add_del_unshare.sh

Before the patch:

  # cat /sys/kernel/debug/tracing/trace_pipe
    kworker/u128:0-8       [031] ...1.   174.162765: cleanup_net <-process_one_work
    kworker/u128:0-8       [031] ...1.   174.240796: inet_twsk_purge <-cleanup_net
    kworker/u128:0-8       [032] ...1.   174.244759: inet_twsk_purge <-tcp_sk_exit_batch
    kworker/u128:0-8       [034] ...1.   174.290861: cleanup_net <-process_one_work
    kworker/u128:0-8       [039] ...1.   175.245027: inet_twsk_purge <-cleanup_net
    kworker/u128:0-8       [046] ...1.   175.290541: inet_twsk_purge <-tcp_sk_exit_batch
    kworker/u128:0-8       [037] ...1.   175.321046: cleanup_net <-process_one_work
    kworker/u128:0-8       [024] ...1.   175.941633: inet_twsk_purge <-cleanup_net
    kworker/u128:0-8       [025] ...1.   176.242539: inet_twsk_purge <-tcp_sk_exit_batch

After:

  # cat /sys/kernel/debug/tracing/trace_pipe
    kworker/u128:0-8       [038] ...1.   428.116174: cleanup_net <-process_one_work
    kworker/u128:0-8       [038] ...1.   428.262532: cleanup_net <-process_one_work
    kworker/u128:0-8       [030] ...1.   429.292645: cleanup_net <-process_one_work
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We will soon introduce an optional per-netns ehash.

This means we cannot use tcp_hashinfo directly in most places.

Instead, access it via net->ipv4.tcp_death_row.hashinfo.

The access will be valid only while initialising tcp_hashinfo
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We will soon introduce an optional per-netns ehash.

This means we cannot use the global sk->sk_prot->h.hashinfo
to fetch a TCP hashinfo.

Instead, set NULL to sk->sk_prot->h.hashinfo for TCP and get
a proper hashinfo from net->ipv4.tcp_death_row.hashinfo.

Note that we need not use sk->sk_prot->h.hashinfo if DCCP is
disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We will soon introduce an optional per-netns ehash and access hash
tables via net->ipv4.tcp_death_row->hashinfo instead of &tcp_hashinfo
in most places.

It could harm the fast path because dereferences of two fields in net
and tcp_death_row might incur two extra cache line misses.  To save one
dereference, let's place tcp_death_row back in netns_ipv4 and fetch
hashinfo via net->ipv4.tcp_death_row"."hashinfo.

Note tcp_death_row was initially placed in netns_ipv4, and commit
fbb82952 ("tcp: allocate tcp_death_row outside of struct netns_ipv4")
changed it to a pointer so that we can fire TIME_WAIT timers after freeing
net.  However, we don't do so after commit 04c494e6 ("Revert "tcp/dccp:
get rid of inet_twsk_purge()""), so we need not define tcp_death_row as a
pointer.

Also, we move refcount_dec_and_test(&tw_refcount) from tcp_sk_exit() to
tcp_sk_exit_batch() as a debug check.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds no functional change and cleans up some functions
that the following patches touch around so that we make them tidy
and easy to review/revert.  The changes are

  - Keep reverse christmas tree order
  - Remove unnecessary init of port in inet_csk_find_open_port()
  - Use req_to_sk() once in reqsk_queue_unlink()
  - Use sock_net(sk) once in tcp_time_wait() and tcp_v[46]_connect()
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove a left-over from commit 2874c5fd ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 152")

There is no need for an empty "License:".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0e5ff727626b748238f4b78932f81572143d8f0b.1662896317.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This is a regression test for commit 592335a4 ("bonding: accept
unsolicited NA message") and commit b7f14132 ("bonding: use unspecified
address if no available link local address"). When the bond interface
up and no available link local address, unspecified address(::) is used to
send the NS message. The unsolicited NA message should also be accepted
for validation.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220920033047.173244-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220915065043.665138-3-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220915065043.665138-2-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220915065043.665138-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

EMAC IP found on RZ/G2L Gb ethernet supports MII interface.
This patch adds support for selecting MII interface mode.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20220914192604.265859-1-biju.das.jz@bp.renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unlike with bridges, one can't add an interface to a bond and set it up
at the same time:

| # ip link set dummy0 down
| # ip link set dummy0 master bond0 up
| Error: Device can not be enslaved while up.

Of all drivers with ndo_add_slave callback, bond and team decline if
IFF_UP flag is set, vrf cycles the interface (i.e., sets it down and
immediately up again) and the others just don't care.

Support the common notion of setting the interface up after enslaving it
by sorting the operations accordingly.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220914150623.24152-1-phil@nwl.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Radhey Shyam Pandey says:

====================
macb: add zynqmp SGMII dynamic configuration support

This patchset add firmware and driver support to do SD/GEM dynamic
configuration. In traditional flow GEM secure space configuration
is done by FSBL. However in specific usescases like dynamic designs
where GEM is not enabled in base vivado design, FSBL skips GEM
initialization and we need a mechanism to configure GEM secure space
in linux space at runtime.
====================

Link: https://lore.kernel.org/r/1663158796-14869-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for the dynamic configuration which takes care of
configuring the GEM secure space configuration registers
using EEMI APIs.
High level sequence is to:
- Check for the PM dynamic configuration support, if no error proceed with
  GEM dynamic configurations(next steps) otherwise skip the dynamic
  configuration.
- Configure GEM Fixed configurations.
- Configure GEM_CLK_CTRL (gemX_sgmii_mode).
- Trigger GEM reset.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Conor Dooley <conor.dooley@microchip.com> (for MPFS)
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add new APIs in firmware to configure SD/GEM registers. Internally
it calls PM IOCTL for below SD/GEM register configuration:
- SD/EMMC select
- SD slot type
- SD base clock
- SD 8 bit support
- SD fixed config
- GEM SGMII Mode
- GEM fixed config
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The symbol is not used outside of the file, so mark it static.

Fixes the following warning:

./drivers/net/xen-netfront.c:676:16: warning: symbol 'bounce_skb' was not declared. Should it be static?
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220914064339.49841-1-ruanjinjie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for interrupts for LAN8804 PHY.

Tested-by: Michael Walle <michael@walle.cc> # on kontron-kswitch-d10
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220913142926.816746-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
sfp: add support for HALNy GPON module

This series adds support for the HALNy GPON SFP module. In order to do
this sensibly, we need a more flexible quirk system, since we need to
change the behaviour of the SFP cage driver to ignore the LOS and
TX_FAULT signals after module detection.

Since we move the SFP quirks into the SFP cage driver, we can use it
for the MA5671A and 3FE46541AA modules as well.
====================

Link: https://lore.kernel.org/r/YyDUnvM1b0dZPmmd@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a quirk for the HALNy HL-GSFP module, which appears to have an
inverted RX_LOS signal, and maybe uses TX_FAULT as a serial port
transmit pin. Rather than use these hardware signals, switch to
using software polling for these status signals.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move this module over to the new fixup mechanism.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a new fixup mechanism to the SFP quirks, and use it for this
module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We need to handle more quirks than just those which affect the link
modes of the module. Move the quirk lookup into sfp.c, and pass the
quirk to sfp-bus.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Re-implement the decision making for soft state polling. Instead of
generating the soft state mask in sfp_soft_start_poll() by looking at
which GPIOs are available, record their availability in
sfp_sm_mod_probe() in sfp->state_hw_mask.

This will then allow us to clear bits in sfp->state_hw_mask in module
specific quirks when the hardware signals should not be used, thereby
allowing us to switch to using the software state polling.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace the free-form description of device tree bindings for VSC9959
and VSC9953 with a YAML formatted dt-schema description. This contains
more or less the same information, but reworded to be a bit more
succint.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220913125806.524314-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: a mix of cleanups

This series contains a set of cleanups done in preparation for a
more substantitive upcoming series that reworks how IPA registers
and their fields are defined.

The first eliminates about half of the possible GSI register
constant symbols by removing offset definitions that are not
currently required.

The next two mainly rearrange code for some common enumerated types.

The next one fixes two spots that reuse local variable names in
inner scopes when defining offsets.

The next adds some additional restrictions on the value held in a
register.

And the last one just fixes two field mask symbol names so they
adhere to the common naming convention.
====================

Link: https://lore.kernel.org/r/20220910011131.1431934-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All field mask symbols are defined with a "_FMASK" suffix, but
EOT_COAL_GRANULARITY and DRBIP_ACL_ENABLE are defined without one.
Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Starting with IPA v4.5, replication is done differently from before,
and as a result the "replication" portion of the how the sequencer
is specified must be zero.

Add a check for the configuration data failing that requirement, and
only update the sesquencer type value when it's supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In ipa_endpoint_init_hdr(), as well as ipa_endpoint_init_hdr_ext(),
a top-level automatic variable named "offset" is used to represent
the offset of a register.

However, deeper within each of those functions is *another*
definition of a local variable with the same name, representing
something else.  Scoping rules ensure the result is what was
intended, but this variable name reuse is bad practice and makes
the code confusing.

Fix this by naming the inner variable "off".  Use "off" instead of
"checksum_offset" in ipa_endpoint_init_cfg() for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the definition of ipa_version_valid(), making it a static
inline function defined together with the enumerated type in
"ipa_version.h".  Define a new count value in the type.

Rename the function to be ipa_version_supported(), and have it
return true only if the IPA version supplied is explicitly supported
by the driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the definition of the gsi_ee_id enumerated type out of "gsi.h"
and into "ipa_version.h".  That latter header file isolates the
definition of the ipa_version enumerated type, allowing it to be
included in both IPA and GSI code.  We have the same requirement for
gsi_ee_id, and moving it here makes it easier to get only that
definition without everything else defined in "gsi.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Each GSI execution environment (EE) is able to access many of the
GSI registers associated with the other EEs.  A block of GSI
registers is contained within a region of memory, and an EE's
register offset can be determined by adding the register's base
offset to the product of the EE ID and a fixed constant.

Despite this possibility, the AP IPA code *never* accesses any GSI
registers other than its own.  So there's no need to define the
macros that compute register offsets for other EEs.

Redefine the AP access macros to compute the offset the way the more
general "any EE" macro would, and get rid of the unneeded macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>