./drivers/net/wireless/mediatek/mt76/mt7921/sdio_mac.c: 223: 8-9: WARNING:
return of 0/1 in function 'mt7921s_tx_status_data' with return type bool

Return statements in functions returning bool should use true/false
instead of 1/0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mtd_read() returns -EUCLEAN in case of corrected bit-flips.
As data was read, don't error out in this case.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Leave more time to abort transmissions (which could happen at low CCK rates)
Only warn if the last filter command is stuck
Signed-off-by: Felix Fietkau <nbd@nbd.name>

If the driver has configured the hardware to drop packets for a sta that was
in powersave mode, then clearing the flag too early opens up a small race
window during which packets could be dropped on wakeup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt7915 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt7603 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The mask variable is assigned but not used after testmode disabled:
if (!en)
	mask = phy->mt76->chainmask;
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have to
be last MCU command to execute in suspend handler and all data traffic
have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL starts as well
in order that mt7921 can successfully fall into the deep sleep mode.

Where we reuse the flag MT76_STATE_SUSPEND and avoid creating
another global flag to stop all of the traffic onto the SDIO bus.

Fixes: 48fab5bb ("mt76: mt7921: introduce mt7921s support")
Reported-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is a preliminary patch for the following patch
("mt76: mt7921s: fix the device cannot sleep deeply in suspend).

mt76_connac_mcu_set_hif_suspend eventually would be handled in each
bus-level suspend/resume handler in either mt7921/sdio.c or mt7921/pci.c
depending on what type of the bus the device is running on. We can move
mt76_connac_mcu_set_hif_suspend to bus-related files to simplify the logic.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>

With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76_get_sar_power and mt76_init_sar_power in the common code.
This is a preliminary patch to add sar support to mt76x02 drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Check return code from mt76_connac_mcu_set_rate_txpower() in mt7921_config
routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

the wiphy's available antennas may be incorrect
When ext phy's antenna_mask is different from main phy
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

MAC80211 doesn't care any decryption error in 802.3 path, so received
frame will be dropped if HW tell us that the cipher configuration is not
matched as well as the header has been translated to 802.3. This case only
appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in
the corresponding HW entry.

The received frame is only reported to monitor interface if HW decryption
block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this
case the reported frame is decrypted 802.11 frame and the payload may be
malformed due to mismatched key.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Get rid of PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode
routine since mode is an u8 and PHY_MODE_AX_6G is set in phymode_ext
field in mt76_connac_bss_basic_tlv.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove always false if condition in get_omac_idx for sta type
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Even if it is not a real bug since mt76_connac_get_phy_mode runs just
for mt7921 where only STA is supported, fix a theoretical NULL pointer
dereference if new added modes do not support HE
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix a possible NULL pointer deference issue in mt7921_mac_write_txwi
routine if vif is NULL.

Fixes: 33920b2b ("mt76: add support for setting mcast rate")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Cap max offset value to ARRAY_SIZE(mt76_rates) - 1 in
mt76_calculate_default_rate routine in order to avoid possible Out Of
Bound accesses.

Fixes: 33920b2b ("mt76: add support for setting mcast rate")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce the basic configuration for BW160 capability in 7922
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix number of rx-queued frames reported by mt76_usb driver.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2d8be76c ("mt76: debugfs: improve queue node readability")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

New mt7921 serials chip support
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add support to set SA/DA/BSSID in testmode.
During mass production stage, some test scripts or test equipments need
to set fixed addresses to detect or parse if a test is passed.
Also, MAC setting is necessary for some tx/rx tests with rx filter,
to make sure rx site only receives expected packets.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Load the default eeprom data when the content of flash/efuse is invalid.
This could help to eliminate some issues due to incorrect or
insufficient rf values.
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Only set RX_FLAG_RADIOTAP_HE and RX_FLAG_RADIOTAP_HE_MU from with their
own decoder functions to prevent header calculation error.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The HW can apply header translation to first fragmented frame, and
ramaining fragmented frame can only keep 802.11 format. Check and
reverse the first fragmented frame to  802.11 format to make sure
them can be defragmented by mac80211.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

TGn fails sending SM power save mode action frame to the AP to switch
from dynamic SMPS mode to static mode.
Reported-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the issue that some registers not configured properly after
restarting testmode.
(e.g. change state from idle to off, and off to idle)
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

There is a missing mt7921e_driver_own in the MT7921E reset procedure
since the mt7921 mcu.c has been refactored for MT7921S, that will
result in MT7921E reset failure, so add it back now.

Fixes: dfc7743d ("mt76: mt7921: refactor mcu.c to be bus independent")
Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.

Move mt7615_register_ext_phy() outside the init_work().
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

offload_flags have to be dropped for mt7921 because mt76.omac_idx 0 would
always run as station mode that would cause Tx encapsulation setting
is not applied to mac80211.

Also, drop IEEE80211_OFFLOAD_ENCAP_4ADDR too because it is not really
being supported.

Fixes: e0f9fdda ("mt76: mt7921: add ieee80211_ops")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the following sparse warning removing mt7915_mcu_set_fixed_rate
since it is no longer used:
warning: symbol 'mt7915_mcu_set_fixed_rate' was not declared.
Should it be static?
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Merge tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.17

Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.

Major changes:

rtw88
 * debugfs file to fix tx rate

iwlwifi
 * support SAR GEO Offset Mapping (SGOM) via BIOS
 * support firmware API version 68
 * add some new device IDs

ath11k
 * support PCI devices with 1 MSI vector
 * WCN6855 hw2.1 support
 * 11d scan offload support
 * full monitor mode, only supported on QCN9074
 * scan MAC address randomization support
 * reserved host DDR addresses from DT for PCI devices support

ath9k
 * switch to rate table based lookup

ath
 * extend South Korea regulatory domain support

wcn36xx
 * beacon filter support

* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
  wcn36xx: Implement beacon filtering
  wcn36xx: Fix physical location of beacon filter comment
  wcn36xx: Fix beacon filter structure definitions
  ath11k: Use reserved host DDR addresses from DT for PCI devices
  dt: bindings: add new DT entry for ath11k PCI device support
  wilc1000: Improve WILC TX performance when power_save is off
  wl1251: specify max. IE length
  rsi: fix array out of bound
  wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
  wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
  wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
  wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
  wilc1000: Fix spurious "FW not responding" error
  wilc1000: Remove misleading USE_SPI_DMA macro
  wilc1000: Fix missing newline in error message
  wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
  rtw89: coex: Update COEX to 5.5.8
  rtw89: coex: Cancel PS leaving while C2H comes
  rtw89: coex: Update BT counters while receiving report
  rtw89: coex: Define LPS state for BTC using
  ...
====================

Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

RX fencing allows the driver to know that any prior change to the RQs has
finished, e.g. when the RQs are disabled/enabled or the hashkey/indirection
table are changed, RX fencing is required.

Remove the previous workaround "ssleep(1)" and add the real support for
RX fencing as the PF driver supports the MANA_FENCE_RQ request now (any
old PF driver not supporting the request won't be used in production).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20211216001748.8751-1-decui@microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eliminate the following coccicheck warning:
./drivers/net/ethernet/vertexcom/mse102x.c:414:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211216015433.83383-1-yang.lee@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>