- 16 Nov, 2022 9 commits
-
-
Thomas Zimmermann authored
The helper for processing deferred I/O on pages has no dependency on the fb_dirty damge-handling callback; so remove the test. In practice, deferred I/O is only used with damage handling and the damage worker already guarantees the presence of the fb_dirty callback. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Move the dirty-fb update from the damage-worker callback into the new helper drm_fb_helper_fb_dirty(), so that it can run outside the damage worker. This change will help to remove the damage worker entirely. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Set the damage area in the new helper drm_fb_helper_add_damage_clip(). It can now be updated without scheduling the damage worker. This change will help to remove the damage worker entirely. No functional changes. Signed-off-by:
-
Brian Starkey authored
These formats are not subsampled, but that means hsub and vsub should be 1, not 0. Fixes: 94b292b2 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats") Reported-by:
George Kennedy <george.kennedy@oracle.com> Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Danilo Krummrich authored
drm_mode_config_init() simply calls drmm_mode_config_init(), hence cleanup is automatically handled through registering drm_mode_config_cleanup() with drmm_add_action_or_reset(). While at it, get rid of the deprecated drm_mode_config_init() and replace it with drmm_mode_config_init() directly. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Signed-off-by:
-
Danilo Krummrich authored
Use drm managed resource allocation (drmm_universal_plane_alloc()) in order to get rid of the explicit destroy hook in struct drm_plane_funcs. Signed-off-by:
-
Danilo Krummrich authored
Use drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes() to get rid of the explicit destroy hook in struct drm_plane_funcs. Signed-off-by:
-
Danilo Krummrich authored
Using drm_device->dev_private is deprecated. Since we've switched to devm_drm_dev_alloc(), struct drm_device is now embedded in struct malidp_drm, hence we can use container_of() to get the struct drm_device instance instead. Signed-off-by:
-
Danilo Krummrich authored
Use drm managed resources to allocate driver structures and get rid of the deprecated drm_dev_alloc() call and replace it with devm_drm_dev_alloc(). This also serves as preparation to get rid of drm_device->dev_private and to fix use-after-free issues on driver unload. Signed-off-by:
-
- 15 Nov, 2022 9 commits
-
-
Maxime Ripard authored
We'll need to get the pixel clock to generate proper display modes for all the current named modes. Let's add it to struct drm_cmdline_mode and fill it when parsing the named mode. Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Tested-by:
Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-12-24b168e5bcd5@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
Maxime Ripard authored
The current code to deal with named modes will only set the mode name, and then it's up to drivers to try to match that name to whatever mode or configuration they see fit. The plan is to remove that need and move the named mode handling out of drivers and into the core, and only rely on modes and properties. Let's start by properly filling drm_cmdline_mode from a named mode. Reviewed-by:
-
Maxime Ripard authored
The current named mode parsing relies only on the mode name, and doesn't allow to specify any other parameter. Let's convert that string list to an array of a custom structure that will hold the name and some additional parameters in the future. Reviewed-by:
-
Maxime Ripard authored
The current construction of the named mode parsing doesn't allow to extend it easily. Let's move it to a separate function so we can add more parameters and modes. In order for the tests to still pass, some extra checks are needed, so it's not a 1:1 move. Reviewed-by:
-
Maxime Ripard authored
drm_connector_pick_cmdline_mode() is in charge of finding a proper drm_display_mode from the definition we got in the video= command line argument. Let's add some unit tests to make sure we're not getting any regressions there. Acked-by:
-
Maxime Ripard authored
As the number of kunit tests in KMS grows further, we start to have multiple test suites that, for example, need to register a mock DRM driver to interact with the KMS function they are supposed to test. Let's add a file meant to provide those kind of helpers to avoid duplication. Reviewed-by:
-
Maxime Ripard authored
KMS supports a number of named modes already, but it's never been documented anywhere, let's fix that. Reviewed-by:
-
José Expósito authored
Commit 6bed2ea3 ("drm/vc4: hdmi: Reset link on hotplug") introduced the vc4_hdmi_reset_link() function. This function dereferences the "connector" pointer before checking whether it is NULL or not. Rework variable assignment to avoid this issue. Fixes: 6bed2ea3 ("drm/vc4: hdmi: Reset link on hotplug") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20221110134752.238820-3-jose.exposito89@gmail.comSigned-off-by:
-
José Expósito authored
Simplify vc4_hdmi_supports_scrambling() by changing its first parameter from struct drm_encoder to struct vc4_hdmi. Signed-off-by:
-
- 14 Nov, 2022 5 commits
-
-
Douglas Anderson authored
If we fail to get a valid panel ID in drm_edid_get_panel_id() we'd like to see the EDID that was read so we have a chance of understanding what's wrong. There's already a function for that, so let's call it in the error case. NOTE: edid_block_read() has a retry loop in it, so actually we'll only print the block read back from the final attempt. This still seems better than nothing. Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221021130637.1.I8c2de0954a4e54e0c59a72938268e2ead91daa98@changeid
-
Dmitry Osipenko authored
Recently DRM framebuffer core and all drivers were moved to unlocked vmapping functions that take the reservation lock. The drm_gem_vram_vmap() was missed out by accident and now deadlocks drivers that use drm_gem_vram helpers when framebuffer is updated, like Bochs driver. Remove the locking from drm_gem_vram_v[un]map() functions to fix the deadlock. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: 79e2cf2e ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221113233850.427704-1-dmitry.osipenko@collabora.com
-
Chris Morgan authored
Support NewVision NV3051D panels as found on the Anbernic RG353P and RG353V. The underlying LCD part number for the RG353x devices is unknown, so the device name and a fallback for the driver IC is used instead. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> [Fixed checkpatch moan about parens] Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-4-macroalpha82@gmail.com
-
Chris Morgan authored
Add documentation for the NewVision NV3051D panel bindings. Note that for the two expected consumers of this panel binding the underlying LCD model is unknown. Name "anbernic,rg353p-panel" is used because the hardware itself is known as "anbernic,rg353p". Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chris Morgan authored
NewVision (also sometimes written as New Vision) is a company based in Shenzen that manufactures ICs for controlling LCD panels. https://www.newvisiondisplay.com/Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 11 Nov, 2022 13 commits
-
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Signed-off-by: -
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Ville Syrjälä authored
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by:Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by:
-
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
-
Dmitry Osipenko authored
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity check to the dma-buf mmaping callback to ensure that the locking assumption won't regress in the future. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Dmitry Osipenko authored
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity checks to the dma-buf mmaping callbacks to ensure that the locking assumptions won't regress in the future. Suggested-by:
Tomasz Figa <tfiga@chromium.org> Acked-by:
-
Dmitry Osipenko authored
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity checks to the dma-buf mmaping callbacks to ensure that the locking assumptions won't regress in the future. Suggested-by:
-
Dmitry Osipenko authored
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity check to the dma-buf mmaping callback to ensure that the locking assumption won't regress in the future. Suggested-by:
-
Dmitry Osipenko authored
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be held. Add locking sanity checks to the dma-buf mmaping callbacks of DRM drivers to ensure that the locking assumptions won't regress in future. Suggested-by:
-
Dmitry Osipenko authored
All dma-buf functions has been moved to dynamic locking specification The dma_buf_mmap_internal() was missed out by accident. Take reservation lock around file mapping operation to adhere the common locking convention. Reported-by:
-
Antonio Gomes authored
Summary: * Add support to turn on/off backlight when changing values in bl_power file. This is achieved by using function backlight_get_brightness() in nva3_set_intensity to get current brightness. Test plan: * Turn off: echo 1 > /sys/class/backlight/nv_backlight/bl_power * Turn on: echo 0 > /sys/class/backlight/nv_backlight/bl_power Signed-off-by:
Antonio Gomes <antoniospg100@gmail.com> Signed-off-by:
Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221104220424.41164-1-antoniospg100@gmail.com
-
- 10 Nov, 2022 2 commits
-
-
Maíra Canal authored
v3d_perfmon_open_file() instantiates a mutex for a particular file instance, but it never destroys it by calling mutex_destroy() in v3d_perfmon_close_file(). Similarly, v3d_perfmon_create_ioctl() instantiates a mutex for a particular perfmon, but it never destroys it by calling mutex_destroy() in v3d_perfmon_destroy_ioctl(). So, add the missing mutex_destroy on both cases. Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-3-mcanal@igalia.com
-
Maíra Canal authored
mutex_init is supposed to be balanced by a call to mutex_destroy, but this is not currently happening on the v3d driver. Considering the introduction of a DRM-managed mutex_init variant, switch to the drmm_mutex_init. Signed-off-by:
-
- 09 Nov, 2022 2 commits
-
-
Jagan Teki authored
Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT dot matrix LCD with 800RGBx1280 dots at maximum. Add support for it. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Signed-off-by:
-
Jagan Teki authored
Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT dot matrix LCD with 800RGBx1280 dots at maximum. Document it. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
