- 06 May, 2015 40 commits
-
-
Erez Shitrit authored
commit ca9b590c upstream. The current code decreases from the mss size (which is the gso_size from the kernel skb) the size of the packet headers. It shouldn't do that because the mss that comes from the stack (e.g IPoIB) includes only the tcp payload without the headers. The result is indication to the HW that each packet that the HW sends is smaller than what it could be, and too many packets will be sent for big messages. An easy way to demonstrate one more aspect of the problem is by configuring the ipoib mtu to be less than 2*hlen (2*56) and then run app sending big TCP messages. This will tell the HW to send packets with giant (negative value which under unsigned arithmetics becomes a huge positive one) length and the QP moves to SQE state. Fixes: b832be1e ('IB/mlx4: Add IPoIB LSO support') Reported-by:
Matthew Finlay <matt@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Mark Brown authored
commit c1c21f4e upstream. Current -next fails to link an ARM allmodconfig because drivers that use the core recovery functions can be built as modules but those functions are not exported: ERROR: "i2c_generic_gpio_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_generic_scl_recovery" [drivers/i2c/busses/i2c-davinci.ko] undefined! ERROR: "i2c_recover_bus" [drivers/i2c/busses/i2c-davinci.ko] undefined! Add exports to fix this. Fixes: 5f9296ba (i2c: Add bus recovery infrastructure) Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Dave Olson authored
commit f7e9e358 upstream. This problem appears to have been introduced in 2.6.29 by commit 93197a36 "Rewrite sysfs processor cache info code". This caused lscpu to error out on at least e500v2 devices, eg: error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory Some embedded powerpc systems use cache-size in DTS for the unified L2 cache size, not d-cache-size, so we need to allow for both DTS names. Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle this. Fixes: 93197a36 ("powerpc: Rewrite sysfs processor cache info code") Signed-off-by:
Dave Olson <olson@cumulusnetworks.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Radim Krčmář authored
commit ca3f0874 upstream. kvm_write_guest_cached() does not mark all written pages as dirty and code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot with cross page accesses. Fix all the easy way. The check is '<= 1' to have the same result for 'len = 0' cache anywhere in the page. (nr_pages_needed is 0 on page boundary.) Fixes: 8f964525 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Michael Ellerman authored
commit 7261b956 upstream. The patch to add it_page_shift incorrectly changed the increment of uaddr to use it_page_shift, rather then (1 << it_page_shift). This broke booting on at least some Cell blades, as the iommu was basically non-functional. Fixes: 3a553170 ("powerpc/iommu: Add it_page_shift field to determine iommu page size") Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Yao Xiwei authored
commit 092a29a4 upstream. When the kernel deleted a vti6 interface, this interface was not removed from the tunnels list. Thus, when the ip6_vti module was removed, this old interface was found and the kernel tried to delete it again. This was leading to a kernel panic. Fixes: 61220ab3 ("vti6: Enable namespace changing") Signed-off-by:
Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Alexander Duyck authored
commit 2e7056c4 upstream. Looking over the implementation for jhash2 and comparing it to jhash_3words I realized that the two hashes were in fact very different. Doing a bit of digging led me to "The new jhash implementation" in which lookup2 was supposed to have been replaced with lookup3. In reviewing the patch I noticed that jhash2 had originally initialized a and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and c were initialized to initval + (length << 2) + JHASH_INITVAL. However the changes in jhash_3words simply replaced the initialization of a and b with JHASH_INITVAL. This change corrects what I believe was an oversight so that a, b, and c in jhash_3words all have the same value added consisting of initval + (length << 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the same hash result given the same inputs. Fixes: 60d509c8 ("The new jhash implementation") Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Russell King authored
commit 767bf7e7 upstream. Normally, when a CPU wants to clear a cache line to zero in the external L2 cache, it would generate bus cycles to write each word as it would do with any other data access. However, a Cortex A9 connected to a L2C-310 has a specific feature where the CPU can detect this operation, and signal that it wants to zero an entire cache line. This feature, known as Full Line of Zeros (FLZ), involves a non-standard AXI signalling mechanism which only the L2C-310 can properly interpret. There are separate enable bits in both the L2C-310 and the Cortex A9 - the L2C-310 needs to be enabled and have the FLZ enable bit set in the auxiliary control register before the Cortex A9 has this feature enabled. Unfortunately, the suspend code was not respecting this - it's not obvious from the code: swsusp_arch_suspend() cpu_suspend() /* saves the Cortex A9 auxiliary control register */ arch_save_image() soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */ cpu_resume() /* restores the Cortex A9 registers, inc auxcr */ At this point, we end up with the L2C disabled, but the Cortex A9 with FLZ enabled - which means any memset() or zeroing of a full cache line will fail to take effect. A similar issue exists in the resume path, but it's slightly more complex: swsusp_arch_suspend() cpu_suspend() /* saves the Cortex A9 auxiliary control register */ arch_save_image() /* image with A9 auxcr saved */ ... swsusp_arch_resume() call_with_stack() arch_restore_image() /* restores image with A9 auxcr saved above */ soft_restart() /* turns off FLZ in Cortex A9, and disables L2C */ cpu_resume() /* restores the Cortex A9 registers, inc auxcr */ Again, here we end up with the L2C disabled, but Cortex A9 FLZ enabled. There's no need to turn off the L2C in either of these two paths; there are benefits from not doing so - for example, the page copies will be faster with the L2C enabled. Hence, fix this by providing a variant of soft_restart() which can be used without turning the L2 cache controller off, and use it in both of these paths to keep the L2C enabled across the respective resume transitions. Fixes: 8ef418c7 ("ARM: l2c: trial at enabling some Cortex-A9 optimisations") Reported-by:
Sean Cross <xobs@kosagi.com> Tested-by:
Russell King <rmk+kernel@arm.linux.org.uk> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Vutla, Lokesh authored
commit 6d7e7e02 upstream. For cases where total length of an input SGs is not same as length of the input data for encryption, omap-aes driver crashes. This happens in the case when IPsec is trying to use omap-aes driver. To avoid this, we copy all the pages from the input SG list into a contiguous buffer and prepare a single element SG list for this buffer with length as the total bytes to crypt, which is similar thing that is done in case of unaligned lengths. Fixes: 6242332f ("crypto: omap-aes - Add support for cases of unaligned lengths") Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Chuck Lever authored
commit 41f97028 upstream. If a provider advertizes a zero max_fast_reg_page_list_len, FRWR depth detection loops forever. Instead of just failing the mount, try other memory registration modes. Fixes: 0fc6c4e7 ("xprtrdma: mind the device's max fast . . .") Reported-by:
Devesh Sharma <Devesh.Sharma@Emulex.Com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by:
Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> [ luis: backported to 3.16: - devattr struct isn't a pointer ] Signed-off-by:
-
Nishanth Menon authored
commit f4831605 upstream. time_init invokes timer64_init (which is __init annotation) since all of these are invoked at init time, lets maintain consistency by ensuring time_init is marked appropriately as well. This fixes the following warning with CONFIG_DEBUG_SECTION_MISMATCH=y WARNING: vmlinux.o(.text+0x3bfc): Section mismatch in reference from the function time_init() to the function .init.text:timer64_init() The function time_init() references the function __init timer64_init(). This is often because time_init lacks a __init annotation or the annotation of timer64_init is wrong. Fixes: 546a3954 ("C6X: time management") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
-
Junjie Mao authored
commit 1c34203a upstream. It is not necessary to call device_remove_groups() when device_add_groups() fails. The group added by device_add_groups() should be removed if sysfs_create_link() fails. Fixes: fa6fdb33 ("driver core: bus_type: add dev_groups") Signed-off-by:
Junjie Mao <junjie_mao@yeah.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mark Rutland authored
commit 91d57155 upstream. After writing the page tables, we use __inval_cache_range to invalidate any stale cache entries. Strongly Ordered memory accesses are not ordered w.r.t. cache maintenance instructions, and hence explicit memory barriers are required to provide this ordering. However, __inval_cache_range was written to be used on Normal Cacheable memory once the MMU and caches are on, and does not have any barriers prior to the DC instructions. This patch adds a DMB between the page tables being written and the corresponding cachelines being invalidated, ensuring that the invalidation makes the new data visible to subsequent cacheable accesses. A barrier is not required before the prior invalidate as we do not access the page table memory area prior to this, and earlier barriers in preserve_boot_args and set_cpu_boot_mode_flag ensures ordering w.r.t. any stores performed prior to entering Linux. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: c218bca7 ("arm64: Relax the kernel cache requirements for boot") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Archit Taneja authored
commit 0b21503d upstream. Currently, a RCG's M/N counter (used for fraction division) is set to either 'bypass' (counter disabled) or 'dual edge' (counter enabled) based on whether the corresponding rcg struct has a mnd field specified and a non-zero N. In the case where M and N are the same value, the M/N counter is still enabled by code even though no division takes place. Leaving the RCG in such a state can result in improper behavior. This was observed with the DSI pixel clock RCG when M and N were both set to 1. Add an additional check (M != N) to enable the M/N counter only when it's needed for fraction division. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Fixes: bcd61c0f (clk: qcom: Add support for root clock generators (RCGs)) Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
mancha security authored
commit 0b053c95 upstream. OPTIMIZER_HIDE_VAR(), as defined when using gcc, is insufficient to ensure protection from dead store optimization. For the random driver and crypto drivers, calls are emitted ... $ gdb vmlinux (gdb) disassemble memzero_explicit Dump of assembler code for function memzero_explicit: 0xffffffff813a18b0 <+0>: push %rbp 0xffffffff813a18b1 <+1>: mov %rsi,%rdx 0xffffffff813a18b4 <+4>: xor %esi,%esi 0xffffffff813a18b6 <+6>: mov %rsp,%rbp 0xffffffff813a18b9 <+9>: callq 0xffffffff813a7120 <memset> 0xffffffff813a18be <+14>: pop %rbp 0xffffffff813a18bf <+15>: retq End of assembler dump. (gdb) disassemble extract_entropy [...] 0xffffffff814a5009 <+313>: mov %r12,%rdi 0xffffffff814a500c <+316>: mov $0xa,%esi 0xffffffff814a5011 <+321>: callq 0xffffffff813a18b0 <memzero_explicit> 0xffffffff814a5016 <+326>: mov -0x48(%rbp),%rax [...] ... but in case in future we might use facilities such as LTO, then OPTIMIZER_HIDE_VAR() is not sufficient to protect gcc from a possible eviction of the memset(). We have to use a compiler barrier instead. Minimal test example when we assume memzero_explicit() would *not* be a call, but would have been *inlined* instead: static inline void memzero_explicit(void *s, size_t count) { memset(s, 0, count); <foo> } int main(void) { char buff[20]; snprintf(buff, sizeof(buff) - 1, "test"); printf("%s", buff); memzero_explicit(buff, sizeof(buff)); return 0; } With <foo> := OPTIMIZER_HIDE_VAR(): (gdb) disassemble main Dump of assembler code for function main: [...] 0x0000000000400464 <+36>: callq 0x400410 <printf@plt> 0x0000000000400469 <+41>: xor %eax,%eax 0x000000000040046b <+43>: add $0x28,%rsp 0x000000000040046f <+47>: retq End of assembler dump. With <foo> := barrier(): (gdb) disassemble main Dump of assembler code for function main: [...] 0x0000000000400464 <+36>: callq 0x400410 <printf@plt> 0x0000000000400469 <+41>: movq $0x0,(%rsp) 0x0000000000400471 <+49>: movq $0x0,0x8(%rsp) 0x000000000040047a <+58>: movl $0x0,0x10(%rsp) 0x0000000000400482 <+66>: xor %eax,%eax 0x0000000000400484 <+68>: add $0x28,%rsp 0x0000000000400488 <+72>: retq End of assembler dump. As can be seen, movq, movq, movl are being emitted inlined via memset(). Reference: http://thread.gmane.org/gmane.linux.kernel.cryptoapi/13764/ Fixes: d4c5efdb ("random: add and use memzero_explicit() for clearing data") Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
mancha security <mancha1@zoho.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Bruno Prémont authored
commit 4eebd5a4 upstream. As GMUX depends on IO for iGP to be enabled and active, lock the IO at vgaarb level. This should prevent GPU driver for dGPU to disable IO for iGP while it tries to own legacy VGA IO. This fixes usage of backlight control combined with closed nvidia driver on some Apple dual-GPU (intel/nvidia) systems. On those systems loading nvidia driver disables intel IO decoding, disabling the gmux backlight controls as a side effect. Prior to commits moving boot_vga from (optional) efifb to less optional vgaarb this mis-behavior could be avoided by using right kernel config (efifb enabled but vgaarb disabled). This patch explicitly does not try to trigger vgaarb changes in order to avoid confusing already running graphics drivers. If IO has been mis-configured by vgaarb gmux will thus fail to probe. It is expected to load/probe gmux prior to graphics drivers. Fixes: ce027dac # nvidia interaction Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86121Reported-by:
Petri Hodju <petrihodju@yahoo.com> Tested-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Simon Horman authored
commit ee72f6ad upstream. Set the SYSCIER as per the values indicated in the documentation. The value previously used appears to been copied from the r8a7779 implementation but on closer inspection is not correct for the r8a7790. Fixes: a48f1655 ("ARM: shmobile: r8a7790 SYSC setup code") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Nicolas Iooss authored
commit a3fa71c4 upstream. In struct wl18xx_acx_rx_rate_stat, rx_frames_per_rates field is an array, not a number. This means WL18XX_DEBUGFS_FWSTATS_FILE can't be used to display this field in debugfs (it would display a pointer, not the actual data). Use WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY instead. This bug has been found by adding a __printf attribute to wl1271_format_buffer. gcc complained about "format '%u' expects argument of type 'unsigned int', but argument 5 has type 'u32 *'". Fixes: c5d94169 ("wl18xx: use new fw stats structures") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Sabrina Dubroca authored
commit 08e83316 upstream. There is a race condition between e1000_change_mtu's cleanups and netpoll, when we change the MTU across jumbo size: Changing MTU frees all the rx buffers: e1000_change_mtu -> e1000_down -> e1000_clean_all_rx_rings -> e1000_clean_rx_ring Then, close to the end of e1000_change_mtu: pr_info -> ... -> netpoll_poll_dev -> e1000_clean -> e1000_clean_rx_irq -> e1000_alloc_rx_buffers -> e1000_alloc_frag And when we come back to do the rest of the MTU change: e1000_up -> e1000_configure -> e1000_configure_rx -> e1000_alloc_jumbo_rx_buffers alloc_jumbo finds the buffers already != NULL, since data (shared with page in e1000_rx_buffer->rxbuf) has been re-alloc'd, but it's garbage, or at least not what is expected when in jumbo state. This results in an unusable adapter (packets don't get through), and a NULL pointer dereference on the next call to e1000_clean_rx_ring (other mtu change, link down, shutdown): BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81194d6e>] put_compound_page+0x7e/0x330 [...] Call Trace: [<ffffffff81195445>] put_page+0x55/0x60 [<ffffffff815d9f44>] e1000_clean_rx_ring+0x134/0x200 [<ffffffff815da055>] e1000_clean_all_rx_rings+0x45/0x60 [<ffffffff815df5e0>] e1000_down+0x1c0/0x1d0 [<ffffffff811e2260>] ? deactivate_slab+0x7f0/0x840 [<ffffffff815e21bc>] e1000_change_mtu+0xdc/0x170 [<ffffffff81647050>] dev_set_mtu+0xa0/0x140 [<ffffffff81664218>] do_setlink+0x218/0xac0 [<ffffffff814459e9>] ? nla_parse+0xb9/0x120 [<ffffffff816652d0>] rtnl_newlink+0x6d0/0x890 [<ffffffff8104f000>] ? kvm_clock_read+0x20/0x40 [<ffffffff810a2068>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81663802>] rtnetlink_rcv_msg+0x92/0x260 By setting the allocator to a dummy version, netpoll can't mess up our rx buffers. The allocator is set back to a sane value in e1000_configure_rx. Fixes: edbbb3ca ("e1000: implement jumbo receive with partial descriptors") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit a5ed1ad0 upstream. The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f, "of/base: Fix PowerPC address parsing hack" Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Grant Likely <grant.likely@linaro.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Al Viro authored
commit 3cab989a upstream. Calling unlazy_walk() in walk_component() and do_last() when we find a symlink that needs to be followed doesn't acquire a reference to vfsmount. That's fine when the symlink is on the same vfsmount as the parent directory (which is almost always the case), but it's not always true - one _can_ manage to bind a symlink on top of something. And in such cases we end up with excessive mntput(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Rafael J. Wysocki authored
commit 4c533c80 upstream. acpi_scan_is_offline() may be called under the physical_node_lock lock of the given device object's parent, so prevent lockdep from complaining about that by annotating that instance with SINGLE_DEPTH_NESTING. Fixes: caa73ea1 (ACPI / hotplug / driver core: Handle containers in a special way) Reported-and-tested-by:
Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Imre Deak authored
commit b5f1c97f upstream. Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across suspend/resume, so fix this. This was introduced in commit ddeea5b0 Author: Imre Deak <imre.deak@intel.com> Date: Mon May 5 15:19:56 2014 +0300 drm/i915: vlv: add runtime PM support I noticed this only by reading the code. To my knowledge it shouldn't cause any real problems at the moment, since the power well backing this register remains on across a runtime s/r. This may change once system-wide s0ix functionality is enabled in the kernel. v2: - resend after a missing git add -u :/ Signed-off-by:
Imre Deak <imre.deak@intel.com> Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 9535c475 upstream. The hardware, according to the specs, is limited to 256 byte transfers, and current driver has no protections in case users attempt to do larger transfers. The code will just stomp over status register and mayhem ensues. Let's split larger transfers into digestable chunks. Doing this allows Atmel MXT driver on Pixel 1 function properly (it hasn't since commit 9d8dc3e5 "Input: atmel_mxt_ts - implement T44 message handling" which tries to consume multiple touchscreen/touchpad reports in a single transaction). Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 5d05e54a upstream. Chuck pointed out a problem that crept in with commit 6ffa30d3 (nfs: don't call blocking operations while !TASK_RUNNING). Linux counts tasks in uninterruptible sleep against the load average, so this caused the system's load average to be pinned at at least 1 when there was a NFSv4.1+ mount active. Not a huge problem, but it's probably worth fixing before we get too many complaints about it. This patch converts the code back to use TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop iteration. In practice no one should really be signalling this thread at all, so I think this is reasonably safe. With this change, there's also no need to game the hung task watchdog so we can also convert the schedule_timeout call back to a normal schedule. Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Tested-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Charles Keepax authored
commit 6ada5c1e upstream. Commit 523c5b89 ("i2c: Remove support for legacy PM") removed the PM ops from the bus type, which causes the pm operations on the s3c2410 adapter device to fail (-ENOSUPP in rpm_callback). The adapter device doesn't get bound to a driver and as such can't have its own pm_runtime callbacks. Previously this was fine as the bus callbacks would have been used, but now this can cause devices which use PM runtime and are attached over I2C to fail to resume. This commit fixes this issue by marking all adapter devices with pm_runtime_no_callbacks, since they can't have any. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by:
Beata Michalska <b.michalska@samsung.com> Signed-off-by:
-
Dmitry Torokhov authored
commit c6cbfb91 upstream. master_xfer() method should return number of i2c messages transferred, but on Rockchip we were usually returning just 1, which caused trouble with users that actually check number of transferred messages vs. checking for negative error codes. Signed-off-by:
-
Giuseppe Cantavenera authored
commit bb7ffbf2 upstream. nfsd triggered a BUG_ON in net_generic(...) when rpc_pipefs_event(...) in fs/nfsd/nfs4recover.c was called before assigning ntfsd_net_id. The following was observed on a MIPS 32-core processor: kernel: Call Trace: kernel: [<ffffffffc00bc5e4>] rpc_pipefs_event+0x7c/0x158 [nfsd] kernel: [<ffffffff8017a2a0>] notifier_call_chain+0x70/0xb8 kernel: [<ffffffff8017a4e4>] __blocking_notifier_call_chain+0x4c/0x70 kernel: [<ffffffff8053aff8>] rpc_fill_super+0xf8/0x1a0 kernel: [<ffffffff8022204c>] mount_ns+0xb4/0xf0 kernel: [<ffffffff80222b48>] mount_fs+0x50/0x1f8 kernel: [<ffffffff8023dc00>] vfs_kern_mount+0x58/0xf0 kernel: [<ffffffff802404ac>] do_mount+0x27c/0xa28 kernel: [<ffffffff80240cf0>] SyS_mount+0x98/0xe8 kernel: [<ffffffff80135d24>] handle_sys64+0x44/0x68 kernel: kernel: Code: 0040f809 00000000 2e020001 <00020336> 3c12c00d 3c02801a de100000 6442eb98 0040f809 kernel: ---[ end trace 7471374335809536 ]--- Fixed this behaviour by calling register_pernet_subsys(&nfsd_net_ops) before registering rpc_pipefs_event(...) with the notifier chain. Signed-off-by:
Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com> Signed-off-by:
Lorenzo Restelli <lorenzo.restelli.ext@nokia.com> Reviewed-by:
Kinlong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
James Bottomley authored
commit 56cbd0cc upstream. mvsas is giving a General protection fault when it encounters an expander attached ATA device. Analysis of mvs_task_prep_ata() shows that the driver is assuming all ATA devices are locally attached and obtaining the phy mask by indexing the local phy table (in the HBA structure) with the phy id. Since expanders have many more phys than the HBA, this is causing the index into the HBA phy table to overflow and returning rubbish as the pointer. mvs_task_prep_ssp() instead does the phy mask using the port properties. Mirror this in mvs_task_prep_ata() to fix the panic. Reported-by:
Adam Talbot <ajtalbot1@gmail.com> Tested-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Oleg Nesterov authored
commit b72c1869 upstream. ptrace_resume() is called when the tracee is still __TASK_TRACED. We set tracee->exit_code and then wake_up_state() changes tracee->state. If the tracer's sub-thread does wait() in between, task_stopped_code(ptrace => T) wrongly looks like another report from tracee. This confuses debugger, and since wait_task_stopped() clears ->exit_code the tracee can miss a signal. Test-case: #include <stdio.h> #include <unistd.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <pthread.h> #include <assert.h> int pid; void *waiter(void *arg) { int stat; for (;;) { assert(pid == wait(&stat)); assert(WIFSTOPPED(stat)); if (WSTOPSIG(stat) == SIGHUP) continue; assert(WSTOPSIG(stat) == SIGCONT); printf("ERR! extra/wrong report:%x\n", stat); } } int main(void) { pthread_t thread; pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); for (;;) kill(getpid(), SIGHUP); } assert(pthread_create(&thread, NULL, waiter, NULL) == 0); for (;;) ptrace(PTRACE_CONT, pid, 0, SIGCONT); return 0; } Note for stable: the bug is very old, but without 9899d11f "ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL" the fix should use lock_task_sighand(child). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Pavel Labath <labath@google.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Akinobu Mita authored
commit 64d240b7 upstream. When UNMAP command is issued with DIF protection support enabled, the protection info for the unmapped region is remain unchanged. So READ command for the region causes data integrity failure. This fixes it by invalidating protection info for the unmapped region by filling with 0xff pattern. This change also adds helper function fd_do_prot_fill() in order to reduce code duplication with existing fd_format_prot(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
"Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Akinobu Mita authored
commit c8367778 upstream. In fd_do_prot_rw(), it allocates prot_buf which is used to copy from se_cmd->t_prot_sg by sbc_dif_copy_prot(). The SG table for prot_buf is also initialized by allocating 'se_cmd->t_prot_nents' entries of scatterlist and setting the data length of each entry to PAGE_SIZE at most. However if se_cmd->t_prot_sg contains a clustered entry (i.e. sg->length > PAGE_SIZE), the SG table for prot_buf can't be initialized correctly and sbc_dif_copy_prot() can't copy to prot_buf. (This actually happened with TCM loopback fabric module) As prot_buf is allocated by kzalloc() and it's physically contiguous, we only need a single scatterlist entry. Signed-off-by:
-
Akinobu Mita authored
commit 38da0f49 upstream. When CONFIG_DEBUG_SG=y and DIF protection support enabled, kernel BUG()s are triggered due to the following two issues: 1) prot_sg is not initialized by sg_init_table(). When CONFIG_DEBUG_SG=y, scatterlist helpers check sg entry has a correct magic value. 2) vmalloc'ed buffer is passed to sg_set_buf(). sg_set_buf() uses virt_to_page() to convert virtual address to struct page, but it doesn't work with vmalloc address. vmalloc_to_page() should be used instead. As prot_buf isn't usually too large, so fix it by allocating prot_buf by kmalloc instead of vmalloc. Signed-off-by:
-
Yann Droneaud authored
commit 66578b0b upstream. In a call to ib_umem_get(), if address is 0x0 and size is already page aligned, check added in commit 8494057a ("IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic") will refuse to register a memory region that could otherwise be valid (provided vm.mmap_min_addr sysctl and mmap_low_allowed SELinux knobs allow userspace to map something at address 0x0). This patch allows back such registration: ib_umem_get() should probably don't care of the base address provided it can be pinned with get_user_pages(). There's two possible overflows, in (addr + size) and in PAGE_ALIGN(addr + size), this patch keep ensuring none of them happen while allowing to pin memory at address 0x0. Anyway, the case of size equal 0 is no more (partially) handled as 0-length memory region are disallowed by an earlier check. Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com Cc: Shachar Raindel <raindel@mellanox.com> Cc: Jack Morgenstein <jackm@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Reviewed-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Yann Droneaud authored
commit 8abaae62 upstream. If ib_umem_get() is called with a size equal to 0 and an non-page aligned address, one page will be pinned and a 0-sized umem will be returned to the caller. This should not be allowed: it's not expected for a memory region to have a size equal to 0. This patch adds a check to explicitly refuse to register a 0-sized region. Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com Cc: Shachar Raindel <raindel@mellanox.com> Cc: Jack Morgenstein <jackm@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Michael Davidson authored
commit a87938b2 upstream. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. Since the size of the "gap" on x86_64 is only guaranteed to be 128MB this means that binaries with large data segments > 128MB can end up mapping part of their data segment over their stack resulting in corruption of the stack (and the data segment once the binary starts to run). Any PIE binary with a data segment > 128MB is vulnerable to this although address randomization means that the actual gap between the stack and the end of the binary is normally greater than 128MB. The larger the data segment of the binary the higher the probability of failure. Fix this by calculating the total size of the binary in the same way as load_elf_interp(). Signed-off-by:
Michael Davidson <md@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Gerald Schaefer authored
commit 97534127 upstream. Commit 61f77eda ("mm/hugetlb: reduce arch dependent code around follow_huge_*") broke follow_huge_pmd() on s390, where pmd and pte layout differ and using pte_page() on a huge pmd will return wrong results. Using pmd_page() instead fixes this. All architectures that were touched by that commit have pmd_page() defined, so this should not break anything on other architectures. Fixes: 61f77eda "mm/hugetlb: reduce arch dependent code around follow_huge_*" Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.cz>, Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Nicholas Bellinger authored
commit c8e63985 upstream. This patch fixes a bug for COMPARE_AND_WRITE handling with fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC. It adds the missing allocation for cmd->t_bidi_data_sg within transport_generic_new_cmd() that is used by COMPARE_AND_WRITE for the initial READ payload, even if the fabric is already providing a pre-allocated buffer for cmd->t_data_sg. Also, fix zero-length COMPARE_AND_WRITE handling within the compare_and_write_callback() and target_complete_ok_work() to queue the response, skipping the initial READ. This fixes COMPARE_AND_WRITE emulation with loopback, vhost, and xen-backend fabric drivers using SG_TO_MEM_NOALLOC. Reported-by:
Christoph Hellwig <hch@lst.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Nadav Amit authored
commit 9e9c3fe4 upstream. kvm_init_msr_list is currently called before hardware_setup. As a result, vmx_mpx_supported always returns false when kvm_init_msr_list checks whether to save MSR_IA32_BNDCFGS. Move kvm_init_msr_list after vmx_hardware_setup is called to fix this issue. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Message-Id: <1428864435-4732-1-git-send-email-namit@cs.technion.ac.il> Signed-off-by:
-
Daniel Vetter authored
commit 37ef01ab upstream. We stopped handling them in commit aaecdf61 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Nov 4 15:52:22 2014 +0100 drm/i915: Stop gathering error states for CS error interrupts but just clearing is apparently not enough: A sufficiently dead gpu left behind by firmware (*cough* coreboot *cough*) can keep the gpu in an endless loop of such interrupts, eventually leading to the nmi firing. And definitely to what looks like a machine hang. Since we don't even enable these interrupts on gen5+ let's do the same on earlier platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93171Tested-by:
Mono <mono-for-kernel-org@donderklumpen.de> Tested-by: info@gluglug.org.uk Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
