Make the link between all the hardware drivers and DRM/KMS interface.
Create the driver itself and make it register all the sub-components.
Use GEM CMA helpers for buffer allocation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Compositor control all the input sub-device (VID, GDP)
and the mixer(s).
It is the main entry point for composition.
Layer interface is used to control the abstracted layers.

Add debug in mixer and GDP.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Mixer hardware IP is responsible of mixing the different inputs layers.
Z-order is managed by the mixer.
We could 2 mixers: one for main path and one for auxillary path

Mixers are part of Compositor hardware block
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

VIDeo plug are one of the compositor input sub-devices.
VID are dedicated to video inputs like YUV plans.

Like GDP, VID are part of Compositor hardware block
and use sti_layer structure to provide an abstraction for
Compositor calls.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Generic Display Pipeline are one of the compositor input sub-devices.
GDP are dedicated to graphic input like RGB plans.
GDP is part of Compositor hardware block which will be introduce later.

A sti_layer structure is used to abstract GDP calls from Compositor.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

TVout hardware block is responsible to dispatch the data flow coming
from compositor block to any of the output (HDMI or Analog TV).
It control when output are start/stop and configure according the
require flow path.

TVout is the parent of HDMI and HDA drivers and bind them at runtime.

Tvout is mapped on drm_encoder structure.
One encoder is created for each of the sub-devices and link to their
connector/bridge
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Add driver to support analog TV ouput.

HDA driver is mapped on drm_bridge and drm_connector structures.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Add driver for HDMI output.
HDMI PHY registers are mixed into HDMI device registers
and their is only one IRQ for all this hardware block.
That is why PHYs aren't using phy framework but only a
thin hdmi_phy_ops structure with start and stop functions.

HDMI driver is mapped on drm_bridge and drm_connector structures.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Video Traffic Advance Communication Rx and Tx drivers are designed
for inter-die communication.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Video Time Generator drivers are used to synchronize the compositor
and tvout hardware IPs by providing line count, sample count,
synchronization signals (HSYNC, VSYNC) and top and bottom fields
indication.
VTG are used by pair for each data path (main or auxiliary)
one for master and one for slave.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

Add DRM/KMS driver bindings documentation.
Describe the required properties for each of the hardware IPs drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>

This chunk was no longer required from what I can see, or
at least it is doing the wrong thing, as I confused
intel_connector->encoder and connector->encoder. Drop it
for now, to remove the warnings at bootup.
Signed-off-by: Dave Airlie <airlied@redhat.com>

When I moved the irq disable down to after display disable,
I didn't realise the gt suspend also required irqs off, so move it
down as well.

Fixes WARNs seen at suspend/resume time.

v2: moved the rps flush down as well.
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

pull the msm patch in.
* 'component-for-drm' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm: msm: update to use component match support

Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/armada: register crtc with port
  drm/armada: permit CRTCs to be registered as separate devices
  dt-bindings: add Marvell Dove LCD controller documentation
  drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock
  drm/armada: convert to componentized support
  drm: add of_graph endpoint helper to find possible CRTCs
  component: fix bug with legacy API
  drm/armada: make variant a CRTC thing
  drm/armada: move variant initialisation to CRTC init
  drm/armada: use number of CRTCs registered
  drm/armada: move IRQ handling into CRTC
  component: add support for component match array
  component: ignore multiple additions of the same component
  component: fix missed cleanup in case of devres failure

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

fixes sparse warning, and removes potentially dangerous name from namespace.
Signed-off-by: Dave Airlie <airlied@redhat.com>

fixes sparse warning.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Regular randconfig nightly testing has detected problems with omapdrm.

omapdrm fails to build when the kernel is built to support 64-bit DMA
addresses and/or 64-bit physical addresses due to an assumption about
the width of these types.

Use %pad to print DMA addresses, rather than %x or %Zx (which is even
more wrong than %x).  Avoid passing a uint32_t pointer into a function
which expects dma_addr_t pointer.

drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply':
drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr':
drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe':
drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init':
drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append':
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1
make[5]: Target `__build' not remade because of errors.
make[4]: *** [drivers/gpu/drm/omapdrm] Error 2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Regular nightly randconfig build testing discovered these warnings:

drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function]
drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function]

Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS()
uses.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Regular nightly randconfig build testing discovered these warnings:

drivers/gpu/drm/cirrus/cirrus_drv.c:79:12: warning: 'cirrus_pm_suspend' defined but not used [-Wunused-function]
drivers/gpu/drm/cirrus/cirrus_drv.c:96:12: warning: 'cirrus_pm_resume' defined but not used [-Wunused-function]

Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS()
uses.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/shmobile/shmob_drm_drv.c:300:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef]

Always use #ifdef with CONFIG symbols, never just bare #if
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef]

Always use #ifdef with CONFIG symbols, never just bare #if
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In tda998x_encoder_destroy(), priv->cec is never NULL, so,
remove its test.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux into drm-next

Evil super powers maintainer abuse, get i915 mst support into -next.

* 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: mst topology dumper in debugfs (v0.2)
  drm/i915: add DP 1.2 MST support (v0.7)
  drm/i915: split conversion function out into separate function
  drm/i915: check connector->encoder before using it.
  i915: split some DP modesetting code into a separate function
  drm/i915: add some registers need for displayport MST support.

use the mst helper code to dump the topology in debugfs.

v0.2: drop is_mst check - as we want to dump other info
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This adds DP 1.2 MST support on Haswell systems.

Notes:
a) this reworks irq handling for DP MST ports, so that we can
avoid the mode config locking in the current hpd handlers, as
we need to process up/down msgs at a better time.

Changes since v0.1:
use PORT_PCH_HOTPLUG to detect short vs long pulses
add a workqueue to deal with digital events as they can get blocked on the
main workqueue beyong mode_config mutex
fix a bunch of modeset checker warnings
acks irqs in the driver
cleanup the MST encoders

Changes since v0.2:
check irq status again in work handler
move around bring up and tear down to fix DPMS on/off
use path properties.

Changes since v0.3:
updates for mst apis
more state checker fixes
irq handling improvements
fbcon handling support
improved reference counting of link - fixes redocking.

Changes since v0.4:
handle gpu reset hpd reinit without oopsing
check link status on HPD irqs
fix suspend/resume

Changes since v0.5:
use proper functions to get max link/lane counts
fix another checker backtrace - due to connectors disappearing.
set output type in more places fro, unknown->displayport
don't talk to devices if no HPD asserted
check mst on short irqs only
check link status properly
rebase onto prepping irq changes.
drop unsued force_act

Changes since v0.6:
cleanup unused struct entry.

[airlied: fix some sparse warnings].
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

sparse complains about these functions missing a prototype, but looking
closer they aren't (and likely not supposed to be) used outside of this
source file, so they can be made static.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The final parameter to ttm_bo_reserve() is a pointer, therefore callers
should use NULL instead of 0.

Fixes a bunch of sparse warnings of this type:

	warning: Using plain integer as NULL pointer
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The drm_copy_field() function copies strings into userspace buffers, so
the first parameter needs to have a __user annotation to avoid warnings
from the sparse checker.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

for MST I need to reuse this, so just move it now.
Signed-off-by: Dave Airlie <airlied@redhat.com>

DP MST will need connectors that aren't connected to specific
encoders, add some checks in advance to avoid oopses.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

this is just prep work for mst support.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These are just from the Haswell spec.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Makes the code a bit more readable.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Not enough brown paper bags, you'll have to share one.
(oops below).

The initial match condition code was racy (locking is coming I hear).

then along came:
cd234b0b
drm/i915: Do not dereference NULL crtc or fb until after checking

Chris made an attempt to fix it, Ben "reviewed" it.
Daniel merged it.

Then
drm/i915: Make use of intel_fb_obj() (v2)
2ff8fde1

made it worse by removing the obj check later.

All in all, my laptop can't barely turn off the display
without hitting this.

Posted to #intel-gfx out of niceness, but I've merged
this already into drm-next.

Here's an oops.
[   11.528185] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[   11.528233] IP: [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.528294] PGD 35bc0067 PUD c997c067 PMD 0
[   11.528321] Oops: 0000 [#1] SMP
[   11.528916] CPU: 3 PID: 244 Comm: kworker/3:2 Not tainted 3.16.0-rc4+ #17
[   11.528949] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET72WW (2.22 ) 02/21/2014
[   11.529004] Workqueue: events intel_edp_psr_work [i915]
[   11.529031] task: ffff8803079fdaa0 ti: ffff8803079c4000 task.ti: ffff8803079c4000
[   11.529067] RIP: 0010:[<ffffffffa0161fde>]  [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.529129] RSP: 0018:ffff8803079c7d40  EFLAGS: 00010246
[   11.529155] RAX: 0000000000000000 RBX: ffff88030c11c000 RCX: c000000000000000
[   11.529189] RDX: 0000000000000001 RSI: 1df0000000000000 RDI: ffff88030c1190d8
[   11.529222] RBP: ffff8803079c7d60 R08: ffffffff82691140 R09: 0000000000000000
[   11.529256] R10: ffff8803079fdaa0 R11: 3e00000000000000 R12: ffff88030c11c728
[   11.529290] R13: ffff88030c1190d8 R14: ffff88031e2d8e00 R15: 00000000000000c0
[   11.529324] FS:  0000000000000000(0000) GS:ffff88031e2c0000(0000) knlGS:0000000000000000
[   11.529361] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   11.529389] CR2: 00000000000000d0 CR3: 00000000c8d9d000 CR4: 00000000001407e0
[   11.529423] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   11.529457] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   11.529489] Stack:
[   11.529500]  ffff88030c119000 ffff88030c11c728 ffff88030c1190d8 ffff88031e2d8e00
[   11.529541]  ffff8803079c7d88 ffffffffa01679b2 ffff880035b29a80 ffff880307909f00
[   11.529583]  ffff88031e2d4740 ffff8803079c7df8 ffffffff810a78ab ffffffff810a7849
[   11.529624] Call Trace:
[   11.529654]  [<ffffffffa01679b2>] intel_edp_psr_work+0x52/0x90 [i915]
[   11.529689]  [<ffffffff810a78ab>] process_one_work+0x1db/0x540
[   11.529719]  [<ffffffff810a7849>] ? process_one_work+0x179/0x540
[   11.529750]  [<ffffffff810a81ed>] worker_thread+0x11d/0x520
[   11.529779]  [<ffffffff810a80d0>] ? create_and_start_worker+0x60/0x60
[   11.529810]  [<ffffffff810aeb04>] kthread+0xe4/0x100
[   11.529836]  [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200
[   11.529870]  [<ffffffff81705ebc>] ret_from_fork+0x7c/0xb0
[   11.529896]  [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200
[   11.529926] Code: ba 31 13 f0 c9 85 f6 75 84 eb d0 66 90 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 48 8b 87 68 ff ff ff 48 8b 9f 28 ff ff ff <48> 8b 80 d0 00 00 00 4c 8b 63 28 48 8b 40 48 48 85 c0 0f 84 1a
[   11.530110] RIP  [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.530163]  RSP <ffff8803079c7d40>
[   11.530180] CR2: 00000000000000d0
Signed-off-by: Dave Airlie <airlied@redhat.com>

misc core patches.

* tag 'topic/core-stuff-2014-07-18' of git://anongit.freedesktop.org/drm-intel:
  drm: Check for connection_mutex in drm_select_eld
  drm/dp-mst-helper: Don't use uninitialized fields of the sideband message header
  drm/dp-mst-helper: Avoid reading uninitialized value
  drm/plane-helper: Use proper plane init function
  drivers/gpu/drm/drm_buffer.c: remove unnecessary null test before kfree
  drm: Fix function names in kerneldoc

- fbc improvements when stolen memory is tight (Ben)
- cdclk handling improvements for vlv/chv (Ville)
- proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert
  Eich)
- gen8 hw semaphore support (Ben)
- more execlist prep work from Oscar Mateo
- locking fixes for primary planes (Matt Roper)
- code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but
  not yet enabled because some fixes from Paulo haven't made the cut
- more gpu boost tuning from Chris
- as usual piles of little things all over

* tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits)
  drm/i915: Make the RPS interrupt generation mask handle the vlv wa
  drm/i915: Move RPS evaluation interval counters to i915->rps
  drm/i915: Don't cast a pointer to void* unnecessarily
  drm/i915: don't read LVDS regs at compute_config time
  drm/i915: check the power domains in intel_lvds_get_hw_state()
  drm/i915: check the power domains in ironlake_get_pipe_config()
  drm/i915: don't skip shared DPLL assertion on LPT
  drm/i915: Only touch WRPLL hw state in enable/disable hooks
  drm/i915: Switch to common shared dpll framework for WRPLLs
  drm/i915: ->enable hook for WRPLLs
  drm/i915: ->disable hook for WRPLLs
  drm/i915: State readout support for WRPLLs
  drm/i915: add POWER_DOMAIN_PLLS
  drm/i915: Document that the pll->mode_set hook is optional
  drm/i915: Basic shared dpll support for WRPLLs
  drm/i915: Precompute static ddi_pll_sel values in encoders
  drm/i915: BDW also has special-purpose DP DDI clocks
  drm/i915: State readout and cross-checking for ddi_pll_sel
  drm/i915: Move ddi_pll_sel into the pipe config
  drm/i915: Add a debugfs file for the shared dpll state
  ...

drm_select_eld should check for mode_config.connection_mutex as
well as mode_config.mutex: We need that since this function checks
conector->encoder links.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[danvet: Pimp commit message slightly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We could be using uninitialized fields of the header in
drm_dp_encode_sideband_msg_hdr(), for instance hdr->somt is set to 1 in
the first patcket but never set to 0 otherwise.

Always clear the header at the start then.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>