- 30 Mar, 2012 1 commit
-
-
Matthew Garrett authored
An HP laptop (Pavilion G4-1016tx) has the following code in _TMP: Store (\_SB.PCI0.LPCB.EC0.RTMP, Local0) If (LGreaterEqual (Local0, S4TP)) { Store (One, HTS4) } S4TP is initialised at 0 and not programmed further until either _HOT or _CRT is called. If we evaluate _TMP before the trip points then HTS4 will always be set, causing the firmware to generate a message on boot complaining that the system shut down because of overheating. The simplest solution is just to reverse the checking of trip points and _TMP in thermal init. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
- 22 Mar, 2012 9 commits
-
-
Amit Daniel Kachhap authored
Basically without this patch changing the mode of thermal zone is not possible as wrong string size is passed to strncmp. Signed-off-by:
Amit Daniel Kachhap <amit.kachhap@linaro.org> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Dan Carpenter authored
thermal_zone_device_register() never returns NULL, on error it returns and ERR_PTR(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Viresh Kumar <viresh.kumar@st.com> Reviewed-by:
Vincenzo Frascino <vincenzo.frascino@st.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Viresh Kumar authored
readl/writel versions for ARM contain memory barrier instruction for synchronizing DMA buffers. These are not required at least on this module. So use lighter _relaxed variants. Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Vincenzo Frascino authored
ST's SPEAr13xx machines are based on CortexA9 ARM processors. These machines contain a thermal sensor for junction temperature monitoring. This patch adds support for this thermal sensor in existing thermal framework. [akpm@linux-foundation.org: little code cleanup] [akpm@linux-foundation.org: print the pointer correctly] [viresh.kumar@st.com: thermal/spear_thermal: add compilation dependency on PLAT_SPEAR] Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@st.com> Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Joe Perches authored
Use the current logging style. Remove PREFIX, add pr_fmt, convert the printks. All dmesg output now prefixed with "thermal_sys: ". Signed-off-by:
Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Joe Perches authored
Just a few tidies to make it more like most kernel sources. A couple of long lines still remain. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Jesper Juhl <jj@chaosbits.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Joe Perches authored
These don't add any value as they are used only once and the surrounding code uses similar variable. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Joe Perches authored
Line continations are not necessary in function calls or statements. Remove them. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Jesper Juhl <jj@chaosbits.net> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Fabio Estevam authored
With CONFIG_NET=n: drivers/thermal/thermal_sys.c:63: warning: 'thermal_event_seqnum' defined but not used Move 'thermal_event_seqnum' definition inside the '#ifdef CONFIG_NET' [akpm@linux-foundation.org: make thermal_event_seqnum local to generate_netlink_event()] Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Guenter Roeck <guenter.roeck@ericsson.com> Acked-by:
Durgadoss R <durgadoss.r@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Len Brown <len.brown@intel.com>
-
- 18 Mar, 2012 3 commits
-
-
Linus Torvalds authored
-
Jason Baron authored
Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to crashes, particularly during shutdown. Reported by Dave Jones and fixed by Eric Dumazet. 2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have already freed the SKB, which causes crashes as to the caller this means requeue the packet. Fixes from Eric Dumazet. 3) usbnet driver doesn't allocate the right amount of headroom on fresh RX SKBs, fix from Eric Dumazet. 4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it abolutely should not take a reference to 'dev', this leads to leaks. Fix from RonQing Li. 5) Fix netfilter ctnetlink race between delete and timeout expiration. From Pablo Neira Ayuso. 6) Revert SFQ change which causes regressions, specifically queueing to tail can lead to unavoidable flow starvation. From Eric Dumazet. 7) Fix a memory leak and a crash on corrupt firmware files in bnx2x, from Michal Schmidt." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc()
-
- 17 Mar, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools, x86: Build perf on older user-space as well perf tools: Use scnprintf where applicable perf tools: Incorrect use of snprintf results in SEGV
-
Pablo Neira Ayuso authored
Kerin Millar reported hardlockups while running `conntrackd -c' in a busy firewall. That system (with several processors) was acting as backup in a primary-backup setup. After several tries, I found a race condition between the deletion operation of ctnetlink and timeout expiration. This patch fixes this problem. Tested-by:
Kerin Millar <kerframil@gmail.com> Reported-by:
Kerin Millar <kerframil@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
RongQing.Li authored
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't need to dev_hold(). With dev_hold(), not corresponding dev_put(), will lead to leak. [ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ] Signed-off-by:
RongQing.Li <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge some more email patches from Andrew Morton: "A couple of nilfs fixes" * emailed from Andrew Morton <akpm@linux-foundation.org>: nilfs2: fix NULL pointer dereference in nilfs_load_super_block() nilfs2: clamp ns_r_segments_percentage to [1, 99]
-
Ryusuke Konishi authored
According to the report from Slicky Devil, nilfs caused kernel oops at nilfs_load_super_block function during mount after he shrank the partition without resizing the filesystem: BUG: unable to handle kernel NULL pointer dereference at 00000048 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP ... Call Trace: [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2] [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2] [<c0226636>] mount_fs+0x36/0x180 [<c023d961>] vfs_kern_mount+0x51/0xa0 [<c023ddae>] do_kern_mount+0x3e/0xe0 [<c023f189>] do_mount+0x169/0x700 [<c023fa9b>] sys_mount+0x6b/0xa0 [<c04abd1f>] sysenter_do_call+0x12/0x28 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc CR2: 0000000000000048 This turned out due to a defect in an error path which runs if the calculated location of the secondary super block was invalid. This patch fixes it and eliminates the reported oops. Reported-by:
Slicky Devil <slicky.dvl@gmail.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Slicky Devil <slicky.dvl@gmail.com> Cc: <stable@vger.kernel.org> [2.6.30+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Haogang Chen authored
ns_r_segments_percentage is read from the disk. Bogus or malicious value could cause integer overflow and malfunction due to meaningless disk usage calculation. This patch reports error when mounting such bogus volumes. Signed-off-by:
Haogang Chen <haogangchen@gmail.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull maintainer update from James Morris: "Please pull this patch which adds Serge as maintainer of the capabilities code, as discussed on lwn and the lsm list. New capabilities must be signed off by the maintainer, and new uses of any capabilities should at be cc'd to the maintainer." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: MAINTAINERS: Add Serge as maintainer of capabilities
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull c6x bugfix from Mark Salter: "Remove dead code from entry.S which causes a build failure when using a newer assembler (v2.22 complains about it, v2.20 ignores it)." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: remove dead code from entry.S
-
Anton Blanchard authored
When writing files to afs I sometimes hit a BUG: kernel BUG at fs/afs/rxrpc.c:179! With a backtrace of: afs_free_call afs_make_call afs_fs_store_data afs_vnode_store_data afs_write_back_from_locked_page afs_writepages_region afs_writepages The cause is: ASSERT(skb_queue_empty(&call->rx_queue)); Looking at a tcpdump of the session the abort happens because we are exceeding our disk quota: rx abort fs reply store-data error diskquota exceeded (32) So the abort error is valid. We hit the BUG because we haven't freed all the resources for the call. By freeing any skbs in call->rx_queue before calling afs_free_call we avoid hitting leaking memory and avoid hitting the BUG. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Blanchard authored
A read of a large file on an afs mount failed: # cat junk.file > /dev/null cat: junk.file: Bad message Looking at the trace, call->offset wrapped since it is only an unsigned short. In afs_extract_data: _enter("{%u},{%zu},%d,,%zu", call->offset, len, last, count); ... if (call->offset < count) { if (last) { _leave(" = -EBADMSG [%d < %zu]", call->offset, count); return -EBADMSG; } Which matches the trace: [cat ] ==> afs_extract_data({65132},{524},1,,65536) [cat ] <== afs_extract_data() = -EBADMSG [0 < 65536] call->offset went from 65132 to 0. Fix this by making call->offset an unsigned int. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Mar, 2012 17 commits
-
-
Mark Salter authored
The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is outside of the conditional block with the matching ENTRY() macro. This leads a newer (v2.22 vs. v2.20) assembler to complain: /tmp/ccGZBaPT.s: Assembler messages: /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant The conditional block became dead code when c6x switched to generic unistd.h and should be removed along with the offending ENDPROC(). Signed-off-by:
Mark Salter <msalter@redhat.com> Acked-by:
David Howells <dhowells@redhat.com>
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375 (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Schmidt authored
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This reverts commit d47a0ac7 (sch_sfq: dont put new flow at the end of flows) As Jesper found out, patch sounded great but has bad side effects. In stress situation, pushing new flows in front of the queue can prevent old flows doing any progress. Packets can stay in SFQ queue for unlimited amount of time. It's possible to add heuristics to limit this problem, but this would add complexity outside of SFQ scope. A more sensible answer to Dave Taht concerns (who reported the issued I tried to solve in original commit) is probably to use a qdisc hierarchy so that high prio packets dont enter a potentially crowded SFQ qdisc. Reported-by:
Jesper Dangaard Brouer <jdb@comx.dk> Cc: Dave Taht <dave.taht@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 87a11578 ( ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().) forgot to convert one error path, leading to crashes in mld_sendpack() Many thanks to Dave Jones for providing a very complete bug report. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
James Morris authored
Add Serge as maintainer of capabilities, per suggestion on LWN: http://lwn.net/Articles/486306/Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Linus Torvalds authored
Merge patches from Andrew Morton: "Nine patches - some bug fixes and some MAINTAINERS fiddling." * emailed from Andrew Morton <akpm@linux-foundation.org>: drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode MAINTAINERS: add entry for exynos mipi display drivers MAINTAINERS: fix link to Gustavo Padovans tree MAINTAINERS: add Johan to Bluetooth maintainers MAINTAINERS: Gustavo has moved prctl: use CAP_SYS_RESOURCE for PR_SET_MM option rapidio/tsi721: fix bug in register offset definitions MAINTAINERS: update ST's Mailing list for SPEAr memcg: free mem_cgroup by RCU to fix oops
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull i2c subsystem fixes from Jean Delvare. * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-algo-bit: Fix spurious SCL timeouts under heavy load i2c-core: Comment says "transmitted" but means "received"
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (zl6100) Enable interval between chip accesses for all chips hwmon: (w83627ehf) Describe undocumented pwm attributes hwmon: (w83627ehf) Fix temp2 source for W83627UHG hwmon: (w83627ehf) Fix memory leak in probe function hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm exynos/intel updates from Dave Airlie: "Two minor updates from Jesse for Intel SNB fixes, and a few fixes from Samsung for exynos. The pull req has Alan's commit in it since Intel based their tree on my tree at that time, but it all seems fine wrt merging." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm exynos: use drm_fb_helper_set_par directly drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion drm/exynos: fix runtime_pm fimd device state on probe drm/exynos: use correct 'exynos-drm' name for platform device drm/i915: support 32 bit BGR formats in sprite planes drm/i915: fix color order for BGR formats on SNB drm/gma500: Fix Cedarview boot failures in 3.3-rc
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For 4 fixes for 3.3 (all trivial): - uvc video driver: fixes a division by zero; - davinci: add module.h to fix compilation; - smsusb: fix the delivery system setting; - smsdvb: the get_frontend implementation there is broken. The smsdvb patch has 127 lines, but it is trivial: instead of returning a cache of the set_frontend (with is wrong, as it doesn't have the updated values for the data, and the implementation there is buggy), it copies the information of the detected DVB parameters from the smsdvb private structures into the corresponding DVBv5 struct fields." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] smsdvb: fix get_frontend [media] smsusb: fix the default delivery system setting [media] media: davinci: added module.h to resolve unresolved macros [media] [FOR,v3.3] uvcvideo: Avoid division by 0 in timestamp calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull target fixes from Nicholas Bellinger: "This series addresses two recently reported regression bugs related to legacy SCSI reservation usage in target core, and iscsi-target reservation conflict handling. The second patch in particular addresses possible data-corruption with SCSI reservations that is specific to iscsi-target fabric LUNs with multiple client writers. Both patches need to go into v3.2 stable ASAP, and the branch based on the last target-pending/3.3-rc-fixes HEAD. Again, thanks to Martin Svec for his help to identify and address this regression bug with iscsi-target." * '3.3-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix reservation conflict -EBUSY response handling bug target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE
-
Dan Carpenter authored
strict_strtoul() writes a long but ->gamma_mode only has space to store an int, so on 64 bit systems we end up scribbling over ->gamma_table_count as well. I've changed it to use kstrtouint() instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Donghwa Lee authored
I'd like to add Inki Dae, Donghwa Lee and Kyungmin Park as maintainers who developers for exynos mipi display drivers for video/driver/exynos/exynos_mipi* and include/video/exynos_mipi*. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-