- 21 Jul, 2021 3 commits
-
-
Vadim Fedorenko authored
Commit d26796ae ("udp: check udp sock encap_type in __udp_lib_err") added checks for encapsulated sockets but it broke cases when there is no implementation of encap_err_lookup for encapsulation, i.e. ESP in UDP encapsulation. Fix it by calling encap_err_lookup only if socket implements this method otherwise treat it as legal socket. Fixes: d26796ae ("udp: check udp sock encap_type in __udp_lib_err") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
syzbot reported a call trace: BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 Call Trace: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:131 [inline] sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865 sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:723 This is an use-after-free issue caused by not updating asoc->shkey after it was replaced in the key list asoc->endpoint_shared_keys, and the old key was freed. This patch is to fix by also updating active_key for asoc when old key is being replaced with a new one. Note that this issue doesn't exist in sctp_auth_del_key_id(), as it's not allowed to delete the active_key from the asoc. Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key") Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sayanta Pattanayak authored
When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Jul, 2021 16 commits
-
-
Markus Boehme authored
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ec ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia He authored
This reverts commit 6206b798. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b798 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <davem@davemloft.net> Cc: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxim Kochetkov authored
Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of PHYs with optical/fiber support. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peilin Ye authored
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b5 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Woudstra authored
Fixes my earlier patch which broke vlan unaware bridges. The IVL bit now only gets set for vid's larger than 1. Fixes: 11d8d98c ("mt7530 fix mt7530_fdb_write vid missing ivl bit") Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Subbaraya Sundeep says: ==================== octeontx2-af: Introduce DMAC based switching With this patch set packets can be switched between all CGX mapped PFs and VFs in the system based on the DMAC addresses. To implement this: AF allocates high priority rules from top entry(0) in MCAM. Rules are allocated for all the CGX mapped PFs and VFs though they are not active and with no NIXLFs attached. Rules for a PF/VF will be enabled only after they are brought up. Two rules one for TX and one for RX are allocated for each PF/VF. A packet sent from a PF/VF with a destination mac of another PF/VF will be hit by TX rule and sent to LBK channel 63. The same returned packet will be hit by RX rule whose action is to forward packet to PF/VF with that destination mac. Implementation of this for 98xx is tricky since there are two NIX blocks and till now a PF/VF can install rule for an NIX0/1 interface only if it is mapped to corresponding NIX0/1 block. Hence Tx rules are modified such that TX interface in MCAM entry can be either NIX0-TX or NIX1-TX. Testing: 1. Create two VFs over PF1(on NIX0) and assign two VFs to two VMs 2. Assign ip addresses to two VFs in VMs and PF2(on NIX1) in host. 3. Assign static arp entries in two VMs and PF2. 4. Ping between VMs and host PF2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Guangbin Huang says: ==================== net: hns3: fixes for -net This series includes some bugfixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/1626685988-25869-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
Currently, VF doesn't enable rx VLAN offload when initializating, and PF does it for VFs. If user disable the rx VLAN offload for VF with ethtool -K, and reload the VF driver, it may cause the rx VLAN offload state being inconsistent between hardware and software. Fixes it by enabling rx VLAN offload when VF initializing. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
For hardware limitation, port VLAN filter is port level, and effective for all the functions of the port. So if not support port VLAN bypass, it's necessary to disable the port VLAN filter, in order to support function level VLAN filter control. Fixes: 2ba30662 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Peng Li authored
When VF need response from PF, VF will wait (1us - 1s) to receive the response, or it will wait timeout and the VF action fails. If VF do not receive response in 1st action because timeout, the 2nd action may receive response for the 1st action, and get incorrect response data.VF must reciveve the right response from PF,or it will cause unexpected error. This patch adds match_id to check mailbox response from PF to VF, to make sure VF get the right response: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. This scheme depends on PF driver supports match_id, if PF driver doesn't support then VF will uses the original scheme. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Chengwen Feng authored
Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
This simple script: ip link add br0 type bridge ip link set swp2 master br0 ip link set br0 address 00:01:02:03:04:05 ip link del br0 produces this result on a DSA switch: [ 421.306399] br0: port 1(swp2) entered blocking state [ 421.311445] br0: port 1(swp2) entered disabled state [ 421.472553] device swp2 entered promiscuous mode [ 421.488986] device swp2 left promiscuous mode [ 421.493508] br0: port 1(swp2) entered disabled state [ 421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT [ 421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT [ 421.943982] br0: port 1(swp2) entered blocking state [ 421.949030] br0: port 1(swp2) entered disabled state [ 422.112504] device swp2 entered promiscuous mode A very simplified view of what happens is: (1) the bridge port is created, and the bridge device inherits its MAC address (2) when joining, the bridge port (DSA) requests a replay of the addition of all FDB entries towards this bridge port and towards the bridge device itself. In fact, DSA calls br_fdb_replay() twice: br_fdb_replay(br, brport_dev); br_fdb_replay(br, br); DSA uses reference counting for the FDB entries. So the MAC address of the bridge is simply kept with refcount 2. When the bridge port leaves under normal circumstances, everything cancels out since the replay of the FDB entry deletion is also done twice per VLAN. (3) when the bridge MAC address changes, switchdev is notified of the deletion of the old address and of the insertion of the new one. But the old address does not really go away, since it had refcount 2, and the new address is added "only" with refcount 1. (4) when the bridge port leaves now, it will replay a deletion of the FDB entries pointing towards the bridge twice. Then DSA will complain that it can't delete something that no longer exists. It is clear that the problem is that the FDB entries towards the bridge are replayed too many times, so let's fix that problem. Fixes: 63c51453 ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Landen Chao authored
Update maintainers for MediaTek switch driver with Deng Qingfang who has contributed many high-quality patches (interrupt, VLAN, GPIO, and etc.) and will help maintenance. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/49e1aa8aac58dcbf1b5e036d09b3fa3bbb1d94d0.1626751861.git.landen.chao@mediatek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
After cited commit, sysctl_tcp_fastopen_blackhole_timeout is no longer a global variable. Fixes: 3733be14 ("ipv4: Namespaceify tcp_fastopen_blackhole_timeout knob") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Link: https://lore.kernel.org/r/20210719092028.3016745-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vasily Averin authored
skb_set_owner_w() should set sk not to old skb but to new nskb. Fixes: 5796015f ("ipv6: allocate enough headroom in ip6_finish_output2()") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 19 Jul, 2021 19 commits
-
-
Subbaraya Sundeep authored
As of now any communication between CGXs PFs and their VFs within the system is possible only by external switches sending packets back to the system. This patch adds internal switching support. Broadcast packet replication is not covered here. RVU admin function (AF) maintains MAC addresses of all interfaces in the system. When switching is enabled, MCAM entries are allocated to install rules such that packets with DMAC matching any of the internal interface MAC addresses is punted back into the system via the loopback channel. On the receive side the default unicast rules are modified to not check for ingress channel. So any packet with matching DMAC irrespective of which interface it is coming from will be forwarded to the respective PF/VF interface. The transmit side rules and default unicast rules are updated if user changes MAC address of an interface. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subbaraya Sundeep authored
AF till now only manages the allocation and freeing of MCAM rules for other PF/VFs in system. To implement L2 switching between all CGX mapped PF and VFs, AF requires MCAM entries for DMAC rules for each PF and VF. This patch modifies AF driver such that AF can also allocate MCAM rules and install rules for other PFs and VFs. All the checks like channel verification for RX rules and PF_FUNC verification for TX rules are relaxed in case AF is allocating or installing rules. Also all the entry and counter to owner mappings are set to NPC_MCAM_INVALID_MAP when they are free indicating those are not allocated to AF nor PF/VFs. This patch also ensures that AF allocated and installed entries are displayed in debugfs. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Subbaraya Sundeep authored
For enabling VF-VF switching the packets egressing out of CGX mapped VFs needed to be sent to LBK so that same packets are received back to the system. But the LBK link also needs to be enabled in addition to a VF's mapped CGX_LMAC link otherwise hardware raises send error interrupt indicating selected LBK link is not enabled in NIX_AF_TL3_TL2X_LINKX_CFG register. Hence this patch enables all LBK links in TL3_TL2_LINKX_CFG registers. Also to enable packet flow between PFs/VFs of NIX0 to PFs/VFs of NIX1(in 98xx silicon) the NPC TX DMAC rules has to be installed such that rules must be hit for any TX interface i.e., NIX0-TX or NIX1-TX provided DMAC match creteria is met. Hence this patch changes the behavior such that MCAM is programmed to match with any NIX0/1-TX interface for TX rules. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tfo_active_disable_stamp is read and written locklessly. We need to annotate these accesses appropriately. Then, we need to perform the atomic_inc(tfo_active_disable_times) after the timestamp has been updated, and thus add barriers to make sure tcp_fastopen_active_should_disable() wont read a stale timestamp. Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Joakim Zhang says: ==================== dt-bindings: net: dwmac-imx: convert This patch set intends to convert imx dwmac binding to schema, and fixes found by dt_binding_check and dtbs_check. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joakim Zhang authored
This patch changs interrupt order which found by dtbs_check. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:0: 'macirq' was expected arch/arm64/boot/dts/freescale/imx8mp-evk.dt.yaml: ethernet@30bf0000: interrupt-names:1: 'eth_wake_irq' was expected According to Documentation/devicetree/bindings/net/snps,dwmac.yaml, we should list interrupt in it's order. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joakim Zhang authored
In order to automate the verification of DT nodes covert imx-dwmac to nxp,dwmac-imx.yaml, and pass below checking. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joakim Zhang authored
Add missing DWMAC IP version in snps,dwmac.yaml which found by below command, as NXP i.MX8 families support SNPS DWMAC 5.10a IP. $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml Documentation/devicetree/bindings/net/nxp,dwmac-imx.example.dt.yaml: ethernet@30bf0000: compatible: None of ['nxp,imx8mp-dwmac-eqos', 'snps,dwmac-5.10a'] are valid under the given schema Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Building on ARCH=arc causes a "redefined" warning, so rename this driver's CACHE_LINE_MASK to avoid the warning. ../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined 134 | #define CACHE_LINE_MASK 0x3F In file included from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:19, from ../include/linux/list.h:9, from ../include/linux/module.h:12, from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7: ../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition 17 | #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) Fixes: d413779c ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes Most of the fixes in this series have to do with error recovery. They include error path handling when the error recovery has to abort, and the rediscovery of capabilities (PTP and RoCE) after firmware reset that may result in capability changes. Two other fixes are to reject invalid ETS settings and to validate VLAN protocol in the RX path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current PTP initialization logic does not account for firmware reset that may cause PTP capability to change. The valid pointer bp->ptp_cfg is used to indicate that the device is capable of PTP and that it has been initialized. So we must clean up bp->ptp_cfg and free it if the firmware after reset does not support PTP. Fixes: 93cb62d9 ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The device needs to be in ifup state for PTP to function, so move bnxt_ptp_init() to bnxt_open(). This means that the PHC will be registered during bnxt_open(). This also makes firmware reset work correctly. PTP configurations may change after firmware upgrade or downgrade. bnxt_open() will be called after firmware reset, so it will work properly. bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now also need to call bnxt_ptp_clear() in bnxt_close(). Fixes: 93cb62d9 ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08 ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Only pass supported VLAN protocol IDs for stripped VLAN tags to the stack. The stack will hit WARN() if the protocol ID is unsupported. Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100. Only the 1st two protocols are supported by the kernel. Fixes: a196e96b ("bnxt_en: clean up VLAN feature bit handling") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
When bnxt_open() fails in the firmware reset path, the driver needs to gracefully abort, but it is executing code that should be invoked only in the success path. Define a function to abort FW reset and consolidate all error paths to call this new function. Fixes: dab62e7c ("bnxt_en: Implement faster recovery for firmware fatal error.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe08 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edwin Peer authored
ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum bandwidth constraints. Thus, zero is a legal value for a given TC. However, if all the other TCs sum up to 100%, then at least one hardware queue will starve, resulting in guaranteed TX timeouts. Reject such nonsensical configurations. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kalesh AP authored
If device is already disabled in reset path and PCI io error is detected before the device could be enabled, driver could call pci_disable_device() for already disabled device. Fix this problem by calling pci_disable_device() only if the device is already enabled. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Jul, 2021 2 commits
-
-
Nguyen Dinh Phi authored
Commit 63346650 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com Fixes: 63346650 ("netrom: switch to sock timer API") Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
After commit ca84bd05 ("sctp: copy the optval from user space in sctp_setsockopt"), it does memory allocation in sctp_setsockopt with the optlen, and it would fail the allocation and return error if the optlen from user space is a huge value. This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and SCTP_AUTH_KEY, as when processing these sockopts before, optlen would be trimmed to a biggest value it needs when optlen is a huge value, instead of failing the allocation and returning error. This patch is to fix the allocation failure when it's a huge optlen from user space by trimming it to the biggest size sctp sockopt may need when necessary, and this biggest size is from sctp_setsockopt_reset_streams() for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT and SCTP_AUTH_KEY. Fixes: ca84bd05 ("sctp: copy the optval from user space in sctp_setsockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-