Now that we have support for the I2C busses on Armada 370/XP, and
support for the RTC on the OpenBlocks AX3-4 platform, include the
necessary options in mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This patch enables SATA support on the OpenBlocks AX3-4. It has one
internal SATA port, and an external eSATA port.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The OpenBlocks AX3-4 has a Seiko Instruments S-35390A as the RTC
controller.  This patch enables this RTC device in the OpenBlocks
AX3-4 Device Tree.

[Thomas Petazzoni: updated with other OpenBlocks changes, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The OpenBlocks AX3-4 board, based on the Armada XP SoC, has an I2C
bus. This patch enables this bus and sets the clock frequency of the
bus.

[Thomas Petazzoni: updated with other changes on OpenBlocks, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The Armada 370 and Armada XP have the same I2C controllers as previous
Marvell SoCs, so the existing mv64xxx-i2c driver works fine.

[Thomas Petazzoni: updated on top of other Armada 370/XP changes,
rephrased the commit log].
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-net-xor-defconfig-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell mvebu defconfig updates for 3.8

Conflicts:
	arch/arm/configs/mvebu_defconfig
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell XOR driver DT changes for 3.8

Conflicts:
	arch/arm/boot/dts/armada-xp.dtsi
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-xor-cleanup-dt-binding-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell XOR driver cleanup and DT binding for 3.8

Merge tag 'marvell-neta-dt-clk-updates-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell Ethernet DT update for clk support

Merge tag 'marvell-mvneta-fix-and-clk-support-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell Ethernet driver fix + clk support

Merge tag 'marvell-net-mdio-checkpatch-fixes-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell network/MDIO driver checkpatch fixes

Conflicts:
	arch/arm/boot/dts/armada-xp-db.dts
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-boards-net-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell boards changes related to Ethernet, for 3.8

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi
	arch/arm/boot/dts/armada-xp-db.dts
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-neta-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell mvneta network driver, for 3.8

Marvell Armada 370/XP support for 3.8

Merge tag 'marvell-mvebu-clk-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell MVEBU clk support, for 3.8

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The mvneta driver for the Marvell Armada 370/XP Ethernet devices has
gained proper clock framework integration, and the corresponding
Device Tree nodes now have a correct 'clocks' pointer.

The 'clock-frequency' properties in the various .dts files for Armada
370/XP boards have therefore become useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The mvneta driver now understands a standard 'clocks' clock pointer
property in the Device Tree nodes for the Ethernet devices, so we add
the right clock reference for the different Ethernet ports of the
Armada 370/XP SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mvneta_deinit() can be called from the ->probe() hook in the error
path, so it shouldn't be marked as __devexit. It fixes the following
section mismatch warning:

WARNING: vmlinux.o(.devinit.text+0x239c): Section mismatch in reference
from the function mvneta_probe() to the function .devexit.text:mvneta_deinit()
The function __devinit mvneta_probe() references
a function __devexit mvneta_deinit().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Now that the Armada 370/XP platform has gained proper integration with
the clock framework, we add clk support in the Marvell Armada 370/XP
Ethernet driver.

Since the existing Device Tree binding that exposes a
'clock-frequency' property has never been exposed in any stable kernel
release, we take the freedom of removing this property to replace it
with the standard 'clocks' clock pointer property.

The Device Tree binding documentation is updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

As reported by checkpatch, the multiline comments for net/ and
drivers/net/ have a slightly different format than the one used in the
rest of the kernel, so we adjust our multiline comments accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

As reported by checkpatch, the multiline comments for net/ and
drivers/net/ have a slightly different format than the one used in the
rest of the kernel, so we adjust our multiline comment accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

As suggested by checkpatch, using <linux/delay.h> instead of
<asm/delay.h> is appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-boards-net-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell boards changes related to Ethernet, for 3.8

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi
	arch/arm/boot/dts/armada-xp-db.dts

Merge tag 'marvell-neta-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell mvneta network driver, for 3.8

Marvell Armada 370/XP support for 3.8

Merge tag 'marvell-mvebu-clk-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell MVEBU clk support, for 3.8

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

With DT support for Marvell XOR DMA engine, make use of it on Dove.
Also remove the now redundant code in DT board init for xor engines.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Use DT to describe the two XOR DMA engines on Kirkwood. Remove the
C code initialization.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The dmatest module for DMA engines calls

device_control(dtc->chan, DMA_TERMINATE_ALL, 0);

after completing the tests. The documentation in
include/linux/dmaengine.h suggests this function is optional and
dma_async_device_register() also does not BUG_ON() when not passed a
function. However, dmatest is not the only code in the kernel
unconditionally calling device_control. So add an implementation
indicating all operations are not implemented.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The ->probe() and ->remove() functions were missing the usual
__devinit and __devexit qualifiers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This patch finally adds a Device Tree binding to the mv_xor
driver. Thanks to the previous cleanup patches, the Device Tree
binding is relatively simply: one DT node per XOR engine, with
sub-nodes for each XOR channel of the XOR engine. The binding
obviously comes with the necessary documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org

Even though the driver cannot be unloaded at the moment, it is still
good to properly free the IRQ handlers in the channel removal function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The pool_size is always PAGE_SIZE, and since it is a software
configuration paramter (and not a hardware description parameter), we
cannot make it part of the Device Tree binding, so we'd better remove
it from the platform_data as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

There is no need for the platform_data to give this ID, it is simply
the channel number, so we can compute it inside the driver when
registering the channels.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The backpointer from mv_xor_chan to mv_xor_device is now useless, get
rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Now that mv_xor_device is no longer used to designate the per-channel
DMA devices, use it know to designate the XOR engine themselves
(currently composed of two XOR channels).

So, now we have the nice organization where:

 - mv_xor_device represents each XOR engine in the system
 - mv_xor_chan   represents each XOR channel of a given XOR engine
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>