It does not make sense for all events (like timer expiry), but for
some uses it's helpful for the called routine to return an error
code.

Do dial-out via the state machine as well, and add a state
to wait for the D-channel hangup as well before unbinding
the isdn_net_dev.

Plus assorted compile/warning fixes.

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.isdn

Armin Schindler converted the driver to use tasklets, which makes more
sense than the new work_struct stuff here.

Add a finite state machine helper module, which is basically copied over
from the hisax driver with a little bit of beautification.

Eventually, all ISDN should be converted to using these routines.

No code change, just move the call control state machine from
isdn_net.c to isdn_net_lib.c

Additionally, a little further cleanup, use the same timer
for incoming call timeout no matter if D- or B-channel connect
times out.

Simplify idle hang-up code.

For some unknown reason, isdn_net kept two pointers back from the channel
to the associated isdn_net_dev, one is enough, though.

Config files, makefiles etc for the NinjaSCSI driver.

This patch supports new driver nsp32 - NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI adapter for 2.5.40. This driver supports at least (we tested) 7
different PCI/Cardbus SCSI cards which use Workbit NinjaSCSI-32 SCSI
processor.

This is the driver part, next one is for things like Config.help,
Makefile, and so on.

into home.transmeta.com:/home/torvalds/v2.5/linux

into suse.cz:/home/perex/bk/linux-sound/linux-sound

Again from UCLinux merge but relevant on its own for any embedded tiny box

Oops forgot this in the first patch set

This stands alone from UCLinux and is independent of whether it ever
merges with the mainstream.  Its rather handy for getting an entire oops
onto a PDA screen

Also note the pcmcia fix - I think the other pcmcia cards should be
using del_timer_sync, but seem not to be.

(Wants indenting but I'll do an indenting pass after the code changes
are accepted)

There is still more work to do, the driver sucks in 2.4 and 2.5 but 2.5 has a
lot more of what is needed to make it work nicely. Basically NCR5380_main
probably has to become a thread in the next generation of the code.

This however seems to get it up and crawling

(From Matthew Wilcox)

(Jaroslav you may want to clone this into ALSA if ALSA lacks this one)

After reverting my nice but totally broken idea about accelerating
the linking steps, make the three-stage .tmp_kallsyms.o generation
/ addition work again.

Yeah, that means that we now link vmlinux three times when
CONFIG_KALLSYMS is set, and that's annoying.

into mulgrave.(none):/home/jejb/BK/scsi-for-linus-2.5

into mulgrave.(none):/home/jejb/BK/scsi-for-linus-2.5

Since we use the dial timer only during setup and the idle timer
only when the connection is active, we can simply (and cleanly) use
the same timer.

That's the last one.  Now we can start doing refcounting...

smbfs compilation fix