- 21 Sep, 2019 40 commits
-
-
Amir Goldstein authored
commit 0be0bfd2 upstream. Once upon a time, commit 2cac0c00 ("ovl: get exclusive ownership on upper/work dirs") in v4.13 added some sanity checks on overlayfs layers. This change caused a docker regression. The root cause was mount leaks by docker, which as far as I know, still exist. To mitigate the regression, commit 85fdee1e ("ovl: fix regression caused by exclusive upper/work dir protection") in v4.14 turned the mount errors into warnings for the default index=off configuration. Recently, commit 146d62e5 ("ovl: detect overlapping layers") in v5.2, re-introduced exclusive upper/work dir checks regardless of index=off configuration. This changes the status quo and mount leak related bug reports have started to re-surface. Restore the status quo to fix the regressions. To clarify, index=off does NOT relax overlapping layers check for this ovelayfs mount. index=off only relaxes exclusive upper/work dir checks with another overlayfs mount. To cover the part of overlapping layers detection that used the exclusive upper/work dir checks to detect overlap with self upper/work dir, add a trap also on the work base dir. Link: https://github.com/moby/moby/issues/34672 Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/ Link: https://github.com/containers/libpod/issues/3540 Fixes: 146d62e5 ("ovl: detect overlapping layers") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Tested-by:
Colin Walters <walters@verbum.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Chancellor authored
commit 6870b673 upstream. The PCI kirin driver compilation produces the following section mismatch warning: WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from the function kirin_pcie_probe() to the function .init.text:kirin_add_pcie_port() The function kirin_pcie_probe() references the function __init kirin_add_pcie_port(). This is often because kirin_pcie_probe lacks a __init annotation or the annotation of kirin_add_pcie_port is wrong. Remove '__init' from kirin_add_pcie_port() to fix it. Fixes: fc5165db ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Joerg Roedel authored
[ Upstream commit 754265bc ] After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by:
Qian Cai <cai@lca.pw> Fixes: 256e4621 ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stuart Hayes authored
[ Upstream commit 36b7200f ] When devices are attached to the amd_iommu in a kdump kernel, the old device table entries (DTEs), which were copied from the crashed kernel, will be overwritten with a new domain number. When the new DTE is written, the IOMMU is told to flush the DTE from its internal cache--but it is not told to flush the translation cache entries for the old domain number. Without this patch, AMD systems using the tg3 network driver fail when kdump tries to save the vmcore to a network system, showing network timeouts and (sometimes) IOMMU errors in the kernel log. This patch will flush IOMMU translation cache entries for the old domain when a DTE gets overwritten with a new domain number. Signed-off-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Fixes: 3ac3e5ee ('iommu/amd: Copy old trans table from old kernel') Signed-off-by:
-
Hillf Danton authored
[ Upstream commit d41a3eff ] If a request_key authentication token key gets revoked, there's a window in which request_key_auth_describe() can see it with a NULL payload - but it makes no check for this and something like the following oops may occur: BUG: Kernel NULL pointer dereference at 0x00000038 Faulting instruction address: 0xc0000000004ddf30 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [...] request_key_auth_describe+0x90/0xd0 LR [...] request_key_auth_describe+0x54/0xd0 Call Trace: [...] request_key_auth_describe+0x54/0xd0 (unreliable) [...] proc_keys_show+0x308/0x4c0 [...] seq_read+0x3d0/0x540 [...] proc_reg_read+0x90/0x110 [...] __vfs_read+0x3c/0x70 [...] vfs_read+0xb4/0x1b0 [...] ksys_read+0x7c/0x130 [...] system_call+0x5c/0x70 Fix this by checking for a NULL pointer when describing such a key. Also make the read routine check for a NULL pointer to be on the safe side. [DH: Modified to not take already-held rcu lock and modified to also check in the read routine] Fixes: 04c567d9 ("[PATCH] Keys: Fix race between two instantiators of a key") Reported-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tianyu Lan authored
[ Upstream commit 4030b4c5 ] When the 'start' parameter is >= 0xFF000000 on 32-bit systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems, fill_gva_list() gets into an infinite loop. With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT and always compares as less than end. Memory is filled with guest virtual addresses until the system crashes. Fix this by never incrementing 'cur' to be larger than 'end'. Reported-by:
Jong Hyun Park <park.jonghyun@yonsei.ac.kr> Signed-off-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2ffd9e33 ("x86/hyper-v: Use hypercall for remote TLB flush") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 9b8bd476 ] Identical to __put_user(); the __get_user() argument evalution will too leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region. While uncommon this was observed to happen for: drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i])) where UBSAN added array bound checking. This complements commit: 6ae86561 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation") Tested-by Sedat Dilek <sedat.dilek@gmail.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: broonie@kernel.org Cc: sfr@canb.auug.org.au Cc: akpm@linux-foundation.org Cc: Randy Dunlap <rdunlap@infradead.org> Cc: mhocko@suse.cz Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.netSigned-off-by:
-
Wenwen Wang authored
[ Upstream commit 962411b0 ] If devm_request_irq() fails to disable all interrupts, no cleanup is performed before retuning the error. To fix this issue, invoke omap_dma_free() to do the cleanup. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.eduSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 2c231c0c ] In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then of_property_read_u32_array() is invoked to search for the property. However, if this process fails, 'rsv_events' is not deallocated, leading to a memory leak bug. To fix this issue, free 'rsv_events' before returning the error. Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit e1e54ec7 ] In commit 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149e ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry Bogdanov authored
[ Upstream commit be6cef69 ] On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e98 ("net: ethernet: aquantia: Vector operations") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by:
-
Naoya Horiguchi authored
[ Upstream commit eeb71c95 ] turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Zephaniah E. Loss-Cutler-Hull authored
[ Upstream commit 03531482 ] The -w argument in x86_energy_perf_policy currently triggers an unconditional segfault. This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and yet the argument handler expects an argument. When parse_optarg_string is called with a null argument, we then proceed to crash in strncmp, not horribly friendly. The man page describes -w as taking an argument, the long form (--hwp-window) is correctly marked as taking a required argument, and the code expects it. As such, this patch simply marks the short form (-w) as requiring an argument. Signed-off-by:
Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit adb80490 ] x86_energy_perf_policy first uses __get_cpuid() to check the maximum CPUID level and exits if it is too low. It then assumes that later calls will succeed (which I think is architecturally guaranteed). It also assumes that CPUID works at all (which is not guaranteed on x86_32). If optimisations are enabled, gcc warns about potentially uninitialized variables. Fix this by adding an exit-on-error after every call to __get_cpuid() instead of just checking the maximum level. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
YueHaibing authored
[ Upstream commit b6b4dc4c ] In xgbe_mod_init(), we should do cleanup if some error occurs Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: efbaa828 ("amd-xgbe: Add support to handle device renaming") Fixes: 47f164de ("amd-xgbe: Add PCI device support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit 0f4cd769 ] When counting dispatched micro-ops with cnt_ctl=1, in order to prevent sample bias, IBS hardware preloads the least significant 7 bits of current count (IbsOpCurCnt) with random values, such that, after the interrupt is handled and counting resumes, the next sample taken will be slightly perturbed. The current count bitfield is in the IBS execution control h/w register, alongside the maximum count field. Currently, the IBS driver writes that register with the maximum count, leaving zeroes to fill the current count field, thereby overwriting the random bits the hardware preloaded for itself. Fix the driver to actually retain and carry those random bits from the read of the IBS control register, through to its write, instead of overwriting the lower current count bits with zeroes. Tested with: perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload> 'perf annotate' output before: 15.70 65: addsd %xmm0,%xmm1 17.30 add $0x1,%rax 15.88 cmp %rdx,%rax je 82 17.32 72: test $0x1,%al jne 7c 7.52 movapd %xmm1,%xmm0 5.90 jmp 65 8.23 7c: sqrtsd %xmm1,%xmm0 12.15 jmp 65 'perf annotate' output after: 16.63 65: addsd %xmm0,%xmm1 16.82 add $0x1,%rax 16.81 cmp %rdx,%rax je 82 16.69 72: test $0x1,%al jne 7c 8.30 movapd %xmm1,%xmm0 8.13 jmp 65 8.24 7c: sqrtsd %xmm1,%xmm0 8.39 jmp 65 Tested on Family 15h and 17h machines. Machines prior to family 10h Rev. C don't have the RDWROPCNT capability, and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't affect their operation. It is unknown why commit db98c5fa ("perf/x86: Implement 64-bit counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt field; the number of preloaded random bits has always been 7, AFAICT. Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
-
Josh Hunt authored
[ Upstream commit 44d3bbb6 ] We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in some cases when using perf: perfevents: irq loop stuck! WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530 ... RIP: 0010:intel_pmu_handle_irq+0x37b/0x530 ... Call Trace: <NMI> ? perf_event_nmi_handler+0x2e/0x50 ? intel_pmu_save_and_restart+0x50/0x50 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x6e/0x120 default_do_nmi+0x3e/0x100 do_nmi+0x102/0x160 end_repeat_nmi+0x16/0x50 ... ? native_write_msr+0x6/0x20 ? native_write_msr+0x6/0x20 </NMI> intel_pmu_enable_event+0x1ce/0x1f0 x86_pmu_start+0x78/0xa0 x86_pmu_enable+0x252/0x310 __perf_event_task_sched_in+0x181/0x190 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 finish_task_switch+0x158/0x260 __schedule+0x2f6/0x840 ? hrtimer_start_range_ns+0x153/0x210 schedule+0x32/0x80 schedule_hrtimeout_range_clock+0x8a/0x100 ? hrtimer_init+0x120/0x120 ep_poll+0x2f7/0x3a0 ? wake_up_q+0x60/0x60 do_epoll_wait+0xa9/0xc0 __x64_sys_epoll_wait+0x1a/0x20 do_syscall_64+0x4e/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fdeb1e96c03 ... Signed-off-by:
-
Jarkko Nikula authored
[ Upstream commit c486dcd2 ] Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave(). There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer. Reported-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Reported-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 189308d5 ] A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by:
SteveM <swm@swm1.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 36f1031c ] Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
zhaoyang authored
[ Upstream commit 5b3efa4f ] pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>] [46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>] [46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>] [46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>] [46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>] [46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>] (ret_fast_syscall+0x0/0x28) Signed-off-by:
Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Nagarjuna Kristam authored
[ Upstream commit 993cc875 ] The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits. However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully. Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon. Signed-off-by:
Nagarjuna Kristam <nkristam@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1566989697-13049-1-git-send-email-nkristam@nvidia.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 478228e5 ] It's safer to zero out the password so that it can never be disclosed. Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit f2aee329 ] RHBZ: 1710429 When we use a domain-key to authenticate using multiuser we must also set the domainnmame for the new volume as it will be used and passed to the server in the NTLMSSP Domain-name. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 2a1a3fa0 ] An arm64 kernel configured with CONFIG_KPROBES=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y reports the following kprobe failure: [ 0.032677] kprobes: failed to populate blacklist: -22 [ 0.033376] Please take care of using kprobes. It appears that kprobe fails to retrieve the symbol at address 0xffff000010081000, despite this symbol being in System.map: ffff000010081000 T __exception_text_start This symbol is part of the first group of aliases in the kallsyms_offsets array (symbol names generated using ugly hacks in scripts/kallsyms.c): kallsyms_offsets: .long 0x1000 // do_undefinstr .long 0x1000 // efi_header_end .long 0x1000 // _stext .long 0x1000 // __exception_text_start .long 0x12b0 // do_cp15instr Looking at the implementation of get_symbol_pos(), it returns the lowest index for aliasing symbols. In this case, it return 0. But kallsyms_lookup_size_offset() considers 0 as a failure, which is obviously wrong (there is definitely a valid symbol living there). In turn, the kprobe blacklisting stops abruptly, hence the original error. A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always some random symbols at the beginning of this array, which are never looked up via kallsyms_lookup_size_offset. Fix it by considering that get_symbol_pos() is always successful (which is consistent with the other uses of this function). Fixes: ffc50891 ("[PATCH] Create kallsyms_lookup_size_offset()") Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit d33d4beb ] Ensure we update the write result count on success, since the RPC call itself does not do so. Reported-by:
Jan Stancek <jstancek@redhat.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by:
-
Trond Myklebust authored
[ Upstream commit 71affe9b ] If we received a reply from the server with a zero length read and no error, then that implies we are at eof. Signed-off-by:
-
Thomas Jarosch authored
[ Upstream commit 3a069024 ] The find_pattern() debug output was printing the 'skip' character. This can be a NULL-byte and messes up further pr_debug() output. Output without the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8 kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8 Output with the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter! kernel: nf_conntrack_ftp: Match succeeded! kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645) kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8 Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Todd Seidelmann authored
[ Upstream commit 3cf2f450 ] Simplify the check in physdev_mt_check() to emit an error message only when passed an invalid chain (ie, NF_INET_LOCAL_OUT). This avoids cluttering up the log with errors against valid rules. For large/heavily modified rulesets, current behavior can quickly overwhelm the ring buffer, because this function gets called on every change, regardless of the rule that was changed. Signed-off-by:
Todd Seidelmann <tseidelmann@linode.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 3e5bedc2 ] Rahul Tanwar reported the following bug on DT systems: > 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is > updated to the end of hardware IRQ numbers but this is done only when IOAPIC > configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is > a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration > comes from devicetree. > > See dtb_add_ioapic() in arch/x86/kernel/devicetree.c > > In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base' > remains to zero initialized value. This means that for OF based systems, > virtual IRQ base will get set to zero. Such systems will very likely not even boot. For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead. Reported-by:
Rahul Tanwar <rahul.tanwar@linux.intel.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
-
Prashant Malani authored
[ Upstream commit f53a7ad1 ] get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by:
Prashant Malani <pmalani@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 2c238177 ] test_select_reuseport fails on s390 due to verifier rejecting test_select_reuseport_kern.o with the following message: ; data_check.eth_protocol = reuse_md->eth_protocol; 18: (69) r1 = *(u16 *)(r6 +22) invalid bpf_context access off=22 size=2 This is because on big-endian machines casts from __u32 to __u16 are generated by referencing the respective variable as __u16 with an offset of 2 (as opposed to 0 on little-endian machines). The verifier already has all the infrastructure in place to allow such accesses, it's just that they are not explicitly enabled for eth_protocol field. Enable them for eth_protocol field by using bpf_ctx_range instead of offsetof. Ditto for ip_protocol, bind_inany and len, since they already allow narrowing, and the same problem can arise when working with them. Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 0ff0f15a ] Multiple batadv_ogm2_packet can be stored in an skbuff. The functions batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there is another additional batadv_ogm2_packet in the skb or not before they continue processing the packet. The length for such an OGM2 is BATADV_OGM2_HLEN + batadv_ogm2_packet->tvlv_len. The check must first check that at least BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Doug Berger authored
[ Upstream commit c51bc12d ] A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33 ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit de0e4fd2 ] If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error. Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit fb89c394 ] Fix mem leak caused by missed unpin routine for umem pages. Fixes: 8aef7340 ("xsk: introduce xdp_umem_page") Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105 [ Upstream commit cd9d4ff9 ] This should be IDT77105, not IDT77015. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 17d8c5d1 ] Initialise the result count to 0 rather than initialising it to the argument count. The reason is that we want to ensure we record the I/O stats correctly in the case where an error is returned (for instance in the layoutstats). Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 9821421a ] If the file turns out to be of the wrong type after opening, we want to revalidate the path and retry, so return EOPENSTALE rather than ESTALE. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 90cf500e ] Currently, we are translating RPC level errors such as timeouts, as well as interrupts etc into EOPENSTALE, which forces a single replay of the open attempt. What we actually want to do is force the replay only in the cases where the returned error indicates that the file may have changed on the server. So the fix is to spell out the exact set of errors where we want to return EOPENSTALE. Signed-off-by:
-
