- 19 Nov, 2019 3 commits
-
-
Nikhil Mahale authored
This patch make it possible for non-acomp codecs to set dyn_pcm_assign/dp_mst and get DP-MST audio support. Document change notification HDA040-A for the Intel High Definition Audio 1.0a specification introduces a Device Select verb for Digital Display Pin Widgets that are multi-stream capable. This verb selects a Device Entry that is used by subsequent Pin Widget verbs. Once the Device Entry is selected, all subsequent Pin Widget verbs controlling the sink device will be directed to the selected Device Entry until the Device Select verb is updated with a new value. These Pin Widget verbs include: * Connection Select * Get Connection List Entry * Amplifier Gain/Mute * Power State * Pin Widget Control * ELD Data * DIP-Size * DIP-Index * DIP-Data * DIP-XmitCtrl * Content Protection Control * ASP Channel Mapping This patch adds calls to snd_hda_set_dev_select() to direct each of these Pin Widget control verbs to the correct Device Entry. snd_hda_get_connections() does not return per-device connection list, therefore make use snd_hda_get_raw_connections() instead of snd_hda_get_connections(). Signed-off-by:
Nikhil Mahale <nmahale@nvidia.com> Reviewed-by:
Aaron Plattner <aplattner@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Nikhil Mahale authored
This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by:
-
Nikhil Mahale authored
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g This aligns the snd_hda_pin_sense function name with the names of other functions in hda_jack.h. Signed-off-by:
-
- 15 Nov, 2019 3 commits
-
-
Kai Vehmanen authored
Remove the workarounds added in commit fa763f1b ("ALSA: hda - Force polling mode on CNL for fixing codec communication") and commit a8d7bde2 ("ALSA: hda - Force polling mode on CFL for fixing codec communication"). The workarounds are no longer needed after the more generic change done in commit 2756d914 ("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips"). This change applies to a larger set of hardware and covers CFL and CNL as well. Similar change was already done to SOF DSP HDA driver with no regressions detected. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-4-kai.vehmanen@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
Remove unnecessary comments related to pin mapping on Intel platforms. Signed-off-by:
-
Kai Vehmanen authored
Semantics of port#0 differ between ICL and TGL: ICL port#0 -> never used for HDAudio ICL port#1 -> should be mapped to first pin (0x04) TGL port#0 -> typically not used, but HW has the support, so should be mapped to first pin (0x04) TGL port#1 -> should be mapped to 2nd pin (0x06) Refactor the port mapping logic to allow to take the above differences into account. Fixes issues with HDAudio on some TGL platforms. Co-developed-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
- 14 Nov, 2019 5 commits
-
-
Takashi Iwai authored
The unit descriptor validation may lead to a probe error when the device provides a buggy descriptor or the validator detected incorrectly. For identifying such an error and band-aiding, give a new module option, skip_validation. With this option, the driver ignores the validation errors with the hexdump of the unit descriptor, so we can check it in a bit more details. Link: https://lore.kernel.org/r/20191114165613.7422-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Introduce a new flag in hdmi_spec to indicate the Intel platform- specific fixups so that we can get rid of the lengthy codec ID checks. The flag is set in intel_hsw_common_init() commonly. Reviewed-by:
-
Takashi Iwai authored
Signed-off-by: -
Takashi Iwai authored
The recently introduced unit descriptor validation had some bug for processing and extension units, it counts a bControlSize byte twice so it expected a bigger size than it should have been. This seems resulting in a probe error on a few devices. Fix the calculation for proper checks of PU and EU. Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The commit 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by:
Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.deSigned-off-by:
-
- 13 Nov, 2019 2 commits
-
-
paulhsia authored
If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by:
paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.orgSigned-off-by:
-
Henry Lin authored
While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by:
Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.comSigned-off-by:
-
- 12 Nov, 2019 1 commit
-
-
Takashi Iwai authored
The code change in commit 6974f8ad ("ALSA: pci: Avoid non-standard macro usage") contained an incorrect conversion, which left the invalid pointer passed to the allocator for au88x0 driver. Fix it. Fixes: 6974f8ad ("ALSA: pci: Avoid non-standard macro usage") Link: https://lore.kernel.org/r/20191112143243.22216-1-tiwai@suse.deSigned-off-by:
-
- 11 Nov, 2019 6 commits
-
-
Takashi Iwai authored
A silly mistake was made while applying the fix for potential races in commit 6a34367e ("ALSA: timer: Fix possible race at assigning a timer instance"): when a slave PCM is opened and succeeds, it doesn't return but proceeds to the master timer open code instead. Plug the hole and beautify a bit. Fixes: 6a34367e ("ALSA: timer: Fix possible race at assigning a timer instance") Reported-by: syzbot+4476917c053f60112c99@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191111173642.6093-1-tiwai@suse.deSigned-off-by:
-
Kai Vehmanen authored
Apply same logic to pin setup as on previous platforms. Fixes errors in HDMI/DP playback. Tested with both snd-hda-intel and SOF drivers. Fixes: 9a11ba73 ("ALSA: hda: hdmi - add Tigerlake support") Signed-off-by:
-
Chiou, Cooper authored
Add HD Audio Device PCI ID for the Intel Cometlake-S platform Signed-off-by:
Chiou, Cooper <cooper.chiou@intel.com> Link: https://lore.kernel.org/r/20191108071349.12840-1-cooper.chiou@intel.comSigned-off-by:
-
Takashi Iwai authored
Now that all users have been converted, we can drop snd_dma_pci_data() macro definition. Link: https://lore.kernel.org/r/20191108164637.1110-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Pass the device pointer from the PCI pointer directly, instead of a non-standard macro. The macro didn't give any better readability. Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Takashi Iwai authored
The recent change (commit 08422d2c: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by:
-
- 09 Nov, 2019 12 commits
-
-
Takashi Iwai authored
A check of the return value from get_cur_mix_raw() is missing at the resolution test code in get_min_max_with_quirks(), which may leave the variable untouched, leading to a random uninitialized value, as detected by syzkaller fuzzer. Add the missing return error check for fixing that. Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191108164528.998-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The recent change (commit 08422d2c: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by:
-
Takashi Iwai authored
The helper is no longer referred after the recent code refactoring. Drop the export for saving some bits and future misuse. Acked-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by:
-
Takashi Iwai authored
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by:
Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191108094641.20086-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM page ops since the recent change in the PCM core (*). Leaving it NULL should work as long as the preallocation has been done properly. This patch drops the redundant lines. (*) 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by:
-
Takashi Iwai authored
Pass the device pointer from the PCI pointer directly, instead of a non-standard macro. The macro didn't give any better readability. Acked-by:
-
Takashi Iwai authored
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM page ops since the recent change in the PCM core (*). Leaving it NULL should work as long as the preallocation has been done properly. This patch drops the redundant lines. (*) 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by:
-
Takashi Iwai authored
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Since it requires the specific buffer type (SNDRV_DMA_TYPE_VMALLOC), it's set in the pcm_new ops now. Acked-by:
-
Takashi Iwai authored
The recent change (commit 08422d2c: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by:
-
Takashi Iwai authored
For non-x86 architectures, SNDRV_DMA_TYPE_DEV_UC should be treated equivalent with SNDRV_DMA_TYPE_DEV, where the default mmap handler still checks only about SNDRV_DMA_TYPE_DEV. Make the check more proper. Note that all existing users of *_UC buffer types are x86-only, so this doesn't fix any bug, but just for consistency. Fixes: 42e748a0 ("ALSA: memalloc: Add non-cached buffer type") Link: https://lore.kernel.org/r/20191108165626.5947-1-tiwai@suse.deSigned-off-by:
-
- 08 Nov, 2019 3 commits
-
-
Takashi Iwai authored
When a new timer instance is created and assigned to the active link in snd_timer_open(), the caller still doesn't (can't) set its callback and callback data. In both the user-timer and the sequencer-timer code, they do manually set up the callbacks after calling snd_timer_open(). This has a potential risk of race when the timer instance is added to the already running timer target, as the callback might get triggered during setting up the callback itself. This patch tries to address it by changing the API usage slightly: - An empty timer instance is created at first via the new function snd_timer_instance_new(). This object isn't linked to the timer list yet. - The caller sets up the callbacks and others stuff for the new timer instance. - The caller invokes snd_timer_open() with this instance, so that it's linked to the target timer. For closing, do similarly: - Call snd_timer_close(). This unlinks the timer instance from the timer list. - Free the timer instance via snd_timer_instance_free() after that. Signed-off-by:
-
Takashi Iwai authored
The function doesn't return any useful value, so let's make it void to be clearer. Signed-off-by:
-
Takashi Iwai authored
The code in both snd_timer_check_master() and snd_timer_check_slave() are almost identical, both check whether the master/slave link and does linkage. Factor out the common code and call it from both functions for readability. Signed-off-by:
-
- 07 Nov, 2019 3 commits
-
-
Takashi Iwai authored
Merge 5.4-devel branch for applying the further ALSA timer fixes. Signed-off-by: -
Takashi Iwai authored
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v5.5 Some big changes in the core but more about cleanps and refactorings than new features, plus a collection of new drivers and lots of small fixes and improvements to existing ones. - Lots more cleanups from Morimoto-san. Now that everything is a component this is mostly about refactorings to clarify and simplify the core, a combination of things that are no longer required due to refactorings and spotting similarities. - Many fixes to the Sound Open Firmware code. - Wake on voice support for Chromebooks. - SPI support for RT5677. - New drivers for Analog Devices ADAU7118, Intel Cannonlake systems with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.4 These are a collection of fixes since v5.4-rc4 that have accumilated, they're all driver specific and there's nothing major in here so it's probably not essential to actually send them but I'll leave that call to you.
-
- 06 Nov, 2019 2 commits
-
-
Dragos Tarcatu authored
When using the example SOF amp widget topology, KASAN dumps this when the AMP bytes kcontrol gets loaded: [ 9.579548] BUG: KASAN: slab-out-of-bounds in sof_control_load+0x8cc/0xac0 [snd_sof] [ 9.588194] Write of size 40 at addr ffff8882314559dc by task systemd-udevd/2411 Fix that by rejecting the topology if the bytes data size > max_size Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies") Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Takashi Iwai authored
The clean up commit 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") unified the error handling code paths with the standard goto, but it introduced a subtle bug: the timer instance is stored in snd_timer_open() incorrectly even if it returns an error. This may eventually lead to UAF, as spotted by fuzzer. The culprit is the snd_timer_open() code checks the SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri. This variable is supposed to be the newly created instance, but we (ab-)used it for a temporary check before the actual creation of a timer instance. After that point, there is another check for the max number of instances, and it bails out if over the threshold. Before the refactoring above, it worked fine because the code returned directly from that point. After the refactoring, however, it jumps to the unified error path that stores the timeri variable in return -- even if it returns an error. Unfortunately this stored value is kept in the caller side (snd_timer_user_tselect()) in tu->timeri. This causes inconsistency later, as if the timer was successfully assigned. In this patch, we fix it by not re-using timeri variable but a temporary variable for testing the exclusive connection, so timeri remains NULL at that point. Fixes: 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") Reported-and-tested-by:
Tristan Madani <tristmd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.deSigned-off-by:
-
