- 23 Jul, 2015 3 commits
-
-
Emil Tantilov authored
This patch extends the reporting of the RSS key and hash table by adding support for X550 VFs. The difference is that X550 VFs have their own registers for RSS key and indirection table, so there is no need to query the PF. The RSS key and indirection table are stored in the adapter structure during the configuration of VFRSSRK and VFRETA which in turn can be used in ethtool for reporting. The logic for writing VFRETA is also changed to make sure that the indirection table is reported correctly. In addition this patch adds defines for the VFRETA entries and number of VFRSSRK registers as well as some whitespace cleanups. Reported-by:
Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Thomas Graf authored
Convert the module_init() to a invocation from inet_init() since ip_tunnel_core is part of the INET built-in. Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by:
-
- 22 Jul, 2015 37 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ... -
Thomas Graf authored
Account for the configuration FIB_RULES=y && INET=n as FIB_RULES can be selected by IPV6 or DECNET without INET. Fixes: e7030878 ("fib: Add fib rule match on tunnel id") Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Erik Kline authored
Per RFC 6724, section 4, "Candidate Source Addresses": It is RECOMMENDED that the candidate source addresses be the set of unicast addresses assigned to the interface that will be used to send to the destination (the "outgoing" interface). Add a sysctl to enable this behaviour. Signed-off-by:Erik Kline <ek@google.com> Signed-off-by:
-
hayeswang authored
Support the new USB gigabit ethernet. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Roopa Prabhu authored
fix for: net/mpls/mpls_iptunnel.c:73:19: sparse: incompatible types in comparison expression (different address spaces) remove incorrect rcu_dereference possibly left over from earlier revisions of the code. Reported-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: update FW, rebrand and more This patch series does several things - it updates the bnx2x FW into 7.12.30 which both contains some small fixes as well as opening the door for several new features for the device - mainly vxlan/geneve offloads and vlan filtering offload. It then adds a new Multi-function mode [BD] which requires this FW in order to operate. In addition, this finally rebrands the driver from a 'broadcom' driver into a 'qlogic' driver [although it would still reside under Broadcom's tree in the kernel]. ==================== Signed-off-by: -
Yuval Mintz authored
Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
Devices with up-to-date management FW will be able to store register dumps on their persistent storage - in case management FW identifies a fatal error it would gather and store such dumps, which could later be retrieved using specific debug tools. This patch adds the necessary part in the driver in order to make the feature operational, as well as update users [under debug] during load in case their device contains a dump of a previous crash. Signed-off-by:
-
Yuval Mintz authored
This adds support to a new multi-function mode, enabling driver to initialize such devices and correctly interacting with management FW for fully utilizing their features. Signed-off-by:
-
Yaniv Rosner authored
This adds support to a new copper phy. Signed-off-by:
Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
bnx2x still appears as a Broadcom driver even though the devices it utilizes belong to Qlogic for more than a year. This patch changes the various headers and the device strings to indicate the correct ownership of the device. Signed-off-by:
-
Yuval Mintz authored
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following: - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded. - FCoE traffic might not recover after a failue while there's traffic to another function. In addition, this FW opens the door for the driver to implement several new features; Specifically, this enhances the device's support for encapsulated packets and will allow vxlan/geneve offloads to be added in the future, as well as vlan filtering offload. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
-
Jiang Liu authored
This is a preparatory patch for moving irq_data struct members. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Rick Jones authored
Track success and failure of TCP PMTU probing. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Sergei Shtylyov authored
The driver is written as if it can adapt to a low memory situation allocating less RX skbs and TX aligned buffers than the respective RX/TX ring sizes. In reality though the driver would malfunction in this case. Stop being overly smart and just fail in such situation -- this is achieved by moving the memory allocation from ravb_ring_format() to ravb_ring_init(). We leave dma_map_single() calls in place but make their failure non-fatal by marking the corresponding RX descriptors with zero data size which should prevent DMA to an invalid addresses. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Hariprasad Shenai authored
Add debugfs entry 'use_backdoor' to enable backdoor access to read sge context. By default, we read sge context's via firmware. In case of FW issues, one can enable backdoor access via debugfs to dump sge context for debugging purpose. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Dan Murphy authored
Fix warning: logical ‘or’ of collectively exhaustive tests is always true Change the internal delay check from an 'or' condition to an 'and' condition. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Dan Murphy <dmurphy@ti.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Roopa Prabhu authored
If user did not specify an oif, try and get it from the via address. If failed to get device, return with -ENODEV. Signed-off-by:
-
Chris J Arges authored
Some architectures like POWER can have a NUMA node_possible_map that contains sparse entries. This causes memory corruption with openvswitch since it allocates flow_cache with a multiple of num_possible_nodes() and assumes the node variable returned by for_each_node will index into flow->stats[node]. Use nr_node_ids to allocate a maximal sparse array instead of num_possible_nodes(). The crash was noticed after 3af229f2 was applied as it changed the node_possible_map to match node_online_map on boot. Fixes: 3af229f2Signed-off-by:
Chris J Arges <chris.j.arges@canonical.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by:
-
Florian Westphal authored
Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by:"Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by:
Cong Wang <cwang@twopensource.com> Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: support for cascaded multicast filtering Recent versions of firmware for SFC9100 adapters add support for filter chaining, in which packets matching multiple filters are delivered to all filters' recipients, rather than only the highest match-priority filter as was previously the case. This patch series enables this feature and redesigns the filter handling code to make use of it; in particular, subscribing to a multicast address on one function no longer prevents traffic to that address reaching another function which is in promiscuous or allmulti mode. If the firmware does not support filter chaining, the driver will fall back to the old behaviour. ==================== Signed-off-by: -
Edward Cree authored
Separate functions for inserting individual and promisc filters; explicit fallback logic in efx_ef10_filter_sync_rx_mode(), in order not to overload the 'promisc' flag as also meaning "fall back to promisc". Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Daniel Pieczko authored
If the workaround to support cascaded multicast filters ("workaround_26807") is enabled, the broadcast filter and individual multicast filters are not inserted when in promiscuous or allmulti mode. There is a race while inserting and removing filters when entering and leaving promiscuous mode. When changing promiscuous state with cascaded multicast filters, the old multicast filters are removed before inserting the new filters to avoid duplicating packets; this can lead to dropped packets until all filters have been inserted. The efx_nic:mc_promisc flag is added to record the presence of a multicast promiscuous filter; this gives a simple way to tell if the promiscuous state is changing. Signed-off-by: -
Daniel Pieczko authored
This change is only re-factoring; there are no changes to functionality except for a slight elaboration of an error message (on mismatch filter insertion failure). Signed-off-by:
-
Jon Cooper authored
If a function is in promiscuous mode and another function has a broadcast or multicast filter inserted, the function in promiscuous mode won't see that broadcast or multicast traffic. Most notably this breaks broadcast, which means ARP doesn't work. Less show-stoppingly, a function listening on a multicast address that's also in promiscuous mode will not see that multicast traffic if another function is also listening on that multicast address. Signed-off-by:
-
Daniel Pieczko authored
When enabling the workaround for cascaded multicast filters, the MC can reset other functions if they have already inserted filters. In that case, the workaround has been enabled, but print an info message in the log recording that other functions had to be reset. As other functions were reset, the MC will have incremented its boot count, so also increment the warm_boot_count on the function which enabled the workaround, as that function won't have received an MC reboot event and does not need to reset. Signed-off-by:
-
Daniel Pieczko authored
The initial use of this will be to check a flag reporting if an FLR was performed on other functions when enabling cascaded multicast filters. Signed-off-by:
-
Edward Cree authored
GET_WORKAROUNDS was only introduced in May 2014, not all firmware will have it. So call sites need to handle ENOSYS. In this case we're probing the bug26807 workaround, which is not implemented in any firmware that doesn't have GET_WORKAROUNDS. So interpret ENOSYS as 'false'. Signed-off-by:
-
Daniel Pieczko authored
After creating event queue 0, check to see if the workaround is enabled, and enable it if necessary. This will be called during PCI probe and also when coming back up after a reset. The nic_data->workaround_26807 will be used in the future to control the filter insertion behaviour based on this workaround. Only the primary PF can enable this workaround, so tolerate an EPERM error and continue. Otherwise, if any step in the checking and enabling of the workaround fails, the event queue must be removed. We check that workaround is implemented before trying to enable it, and store the current workaround setting before trying to change it. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
David S. Miller authored
Nicolas Schichan says: ==================== BPF JIT fixes for ARM These patches are fixing bugs in the ARM JIT and should probably find their way to a stable kernel. All 60 test_bpf tests in Linux 4.1 release are now passing OK (was 54 out of 60 before). ==================== Signed-off-by: -
Nicolas Schichan authored
This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG and LD_VLAN_TAG_PRESENT tests pass. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
-
Nicolas Schichan authored
Previously, the JIT would reject negative offsets known during code generation and mishandle negative offsets provided at runtime. Fix that by calling bpf_internal_load_pointer_neg_helper() appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing the execution flow to the slow path helpers when the offset is negative. Signed-off-by: -
Nicolas Schichan authored
To check whether the load should take the fast path or not, the code would check that (r_skb_hlen - load_order) is greater than the offset of the access using an "Unsigned higher or same" condition. For halfword accesses and an skb length of 1 at offset 0, that test is valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path is taken and the filter allows the load to wrongly succeed. A similar issue exists for word loads at offset 0 and an skb length of less than 4. Fix that by using the condition "Signed greater than or equal" condition for the fast path code for load orders greater than 0. Signed-off-by:
-
Eric Dumazet authored
Andrew Morton reported following warning on one ARM build with gcc-4.4 : net/ipv4/inet_hashtables.c: In function 'inet_ehash_locks_alloc': net/ipv4/inet_hashtables.c:617: warning: division by zero Even guarded with a test on sizeof(spinlock_t), compiler does not like current construct on a !CONFIG_SMP build. Remove the warning by using a temporary variable. Fixes: 095dc8e0 ("tcp: fix/cleanup inet_ehash_locks_alloc()") Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
