Collect the time for each allocation recorded in page owner so that
allocation "surges" can be measured.

Record the pid for each allocation recorded in page owner so that the
source of allocation "surges" can be better identified.

The above is very useful when doing memory analysis.  On a crash for
example, we can get this information from kdump (or ramdump) and parse it
to figure out memory allocation problems.

Please note that on x86_64 this increases the size of struct page_owner
from 16 bytes to 32.

Vlastimil: it's not a functionality intended for production, so unless
somebody says they need to enable page_owner for debugging and this
increase prevents them from fitting into available memory, let's not
complicate things with making this optional.

[lmark@codeaurora.org: v3]
  Link: https://lkml.kernel.org/r/20201210160357.27779-1-georgi.djakov@linaro.org

Link: https://lkml.kernel.org/r/20201209125153.10533-1-georgi.djakov@linaro.orgSigned-off-by: Liam Mark <lmark@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Page owner of pages used by page owner itself used is missing on arm32
targets.  The reason is dummy_handle and failure_handle is not initialized
correctly.  Buddy allocator is used to initialize these two handles.
However, buddy allocator is not ready when page owner calls it.  This
change fixed that by initializing page owner after buddy initialization.

The working flow before and after this change are:
original logic:
 1. allocated memory for page_ext(using memblock).
 2. invoke the init callback of page_ext_ops like page_owner(using buddy
    allocator).
 3. initialize buddy.

after this change:
 1. allocated memory for page_ext(using memblock).
 2. initialize buddy.
 3. invoke the init callback of page_ext_ops like page_owner(using buddy
    allocator).

with the change, failure/dummy_handle can get its correct value and page
owner output for example has the one for page owner itself:

  Page allocated via order 2, mask 0x6202c0(GFP_USER|__GFP_NOWARN), pid 1006, ts 67278156558 ns
  PFN 543776 type Unmovable Block 531 type Unmovable Flags 0x0()
    init_page_owner+0x28/0x2f8
    invoke_init_callbacks_flatmem+0x24/0x34
    start_kernel+0x33c/0x5d8

Link: https://lkml.kernel.org/r/1603104925-5888-1-git-send-email-zhenhuah@codeaurora.orgSigned-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus notes the kernel has had a nice helper for the 'size of struct with
variable array member at the end' operation for a couple years now, use
it.

Link: http://lore.kernel.org/r/CAHk-=wgNTLbvAD8mNTvh+GQyapNWeX20PXhU_+frqEvVq4298w@mail.gmail.com
Link: https://lkml.kernel.org/r/160288261564.3242821.6055291930923876456.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page order of the slab that gets chosen for a given slab cache depends
on the number of objects that can be fit in the slab while meeting other
requirements.  We start with a value of minimum objects based on
nr_cpu_ids that is driven by possible number of CPUs and hence could be
higher than the actual number of CPUs present in the system.  This leads
to calculate_order() chosing a page order that is on the higher side
leading to increased slab memory consumption on systems that have bigger
page sizes.

Hence rely on the number of online CPUs when determining the mininum
objects, thereby increasing the chances of chosing a lower conservative
page order for the slab.

Vlastimil said:
  "Ideally, we would react to hotplug events and update existing caches
   accordingly. But for that, recalculation of order for existing caches
   would have to be made safe, while not affecting hot paths. We have
   removed the sysfs interface with 32a6f409 ("mm, slub: remove
   runtime allocation order changes") as it didn't seem easy and worth
   the trouble.

   In case somebody wants to start with a large order right from the
   boot because they know they will hotplug lots of cpus later, they can
   use slub_min_objects= boot param to override this heuristic. So in
   case this change regresses somebody's performance, there's a way
   around it and thus the risk is low IMHO"

Link: https://lkml.kernel.org/r/20201118082759.1413056-1-bharata@linux.ibm.comSigned-off-by: Bharata B Rao <bharata@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9cf7a111 ("mm/slub: make add_full() condition more explicit")
replaced an unnecessarily generic kmem_cache_debug(s) check with an
explicit check of SLAB_STORE_USER and #ifdef CONFIG_SLUB_DEBUG.

We can achieve the same specific check with the recently added
kmem_cache_debug_flags() which removes the #ifdef and restores the
no-branch-overhead benefit of static key check when slub debugging is not
enabled.

Link: https://lkml.kernel.org/r/3ef24214-38c7-1238-8296-88caf7f48ab6@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Abel Wu <wuyun.wu@huawei.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Liu Xiang <liu.xiang6@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently in CONFIG_SLAB init_on_free happens too late, and heap objects
go to the heap quarantine not being erased.

Lets move init_on_free clearing before calling kasan_slab_free().  In that
case heap quarantine will store erased objects, similarly to CONFIG_SLUB=y
behavior.

Link: https://lkml.kernel.org/r/20201210183729.1261524-1-alex.popov@linux.comSigned-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page allocator expects that page->mapping is NULL for a page being
freed.  SLAB and SLUB use the slab_cache field which is in union with
mapping, but before freeing the page, the field is referenced with the
"mapping" name when set to NULL.

It's IMHO more correct (albeit functionally the same) to use the
slab_cache name as that's the field we use in SL*B, and document why we
clear it in a comment (we don't clear fields such as s_mem or freelist, as
page allocator doesn't care about those).  While using the 'mapping' name
would automagically keep the code correct if the unions in struct page
changed, such changes should be done consciously and needed changes
evaluated - the comment should help with that.

Link: https://lkml.kernel.org/r/20201210160020.21562-1-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-10-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-9-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-8-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-7-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-6-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-5-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the helper that checks for overflows internally instead of manually
calculating the size of the new array.

Link: https://lkml.kernel.org/r/20201109110654.12547-4-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When allocating an array of elements, users should check for
multiplication overflow or preferably use one of the provided helpers
like: kmalloc_array().

There's no krealloc_array() counterpart but there are many users who use
regular krealloc() to reallocate arrays.  Let's provide an actual
krealloc_array() implementation.

While at it: add some documentation regarding krealloc.

Link: https://lkml.kernel.org/r/20201109110654.12547-3-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: David Rientjes <rientjes@google.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "slab: provide and use krealloc_array()", v3.

Andy brought to my attention the fact that users allocating an array of
equally sized elements should check if the size multiplication doesn't
overflow.  This is why we have helpers like kmalloc_array().

However we don't have krealloc_array() equivalent and there are many users
who do their own multiplication when calling krealloc() for arrays.

This series provides krealloc_array() and uses it in a couple places.

A separate series will follow adding devm_krealloc_array() which is needed
in the xilinx adc driver.

This patch (of 9):

__GFP_ZERO is ignored by krealloc() (unless we fall-back to kmalloc()
path, in which case it's honored).  Point that out in the kerneldoc.

Link: https://lkml.kernel.org/r/20201109110654.12547-1-brgl@bgdev.pl
Link: https://lkml.kernel.org/r/20201109110654.12547-2-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dump_unreclaimable_slab() acquires the slab_mutex first, and it won't
remove any slab_caches list entry when itering the slab_caches lists.

Thus we do not need list_for_each_entry_safe here, which is against
removal of list entry.

Link: https://lkml.kernel.org/r/20200926043440.GA180545@rlkSigned-off-by: Hui Su <sh_def@163.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are a few spelling mistakes in the Kconfig comments and help text.
Fix these.

Link: https://lkml.kernel.org/r/20201207155004.171962-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Running stress-ng on ocfs2 completely fills the kernel log with 'max
lookup times reached, filesystem may have nested directories.'

Let's ratelimit this message as done with others in the code.

Test-case:

  # mkfs.ocfs2 --mount local $DEV
  # mount $DEV $MNT
  # cd $MNT

  # dmesg -C
  # stress-ng --dirdeep 1 --dirdeep-ops 1000
  # dmesg | grep -c 'max lookup times reached'

Before:

  # dmesg -C
  # stress-ng --dirdeep 1 --dirdeep-ops 1000
  ...
  stress-ng: info:  [11116] successful run completed in 3.03s

  # dmesg | grep -c 'max lookup times reached'
  967

After:

  # dmesg -C
  # stress-ng --dirdeep 1 --dirdeep-ops 1000
  ...
  stress-ng: info:  [739] successful run completed in 0.96s

  # dmesg | grep -c 'max lookup times reached'
  10

  # dmesg
  [  259.086086] ocfs2_check_if_ancestor: 1990 callbacks suppressed
  [  259.086092] (stress-ng-dirde,740,1):ocfs2_check_if_ancestor:1091 max lookup times reached, filesystem may have nested directories, src inode: 18007, dest inode: 17940.
  ...

Link: https://lkml.kernel.org/r/20201001224417.478263-1-mfo@canonical.comSigned-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A break is not needed if it is preceded by a goto

Link: https://lkml.kernel.org/r/20201019175216.2329-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This variable isn't used anymore, remove it to skip W=1 warning:

  fs/ntfs/inode.c:2350:6: warning: variable `attr_len' set but not used [-Wunused-but-set-variable]

Link: https://lkml.kernel.org/r/4194376f-898b-b602-81c3-210567712092@linux.alibaba.comSigned-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We actually don't use these varibles, so remove them to avoid gcc warning:

  fs/ntfs/file.c:326:14: warning: variable `base_ni' set but not used [-Wunused-but-set-variable]
  fs/ntfs/logfile.c:481:21: warning: variable `log_page_mask' set but not used [-Wunused-but-set-variable]

Link: https://lkml.kernel.org/r/1604821092-54631-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the discussion about preempt count consistency across kernel
configurations:

 https://lore.kernel.org/r/20200914204209.256266093@linutronix.de/

it was concluded that the usage of in_interrupt() and related context
checks should be removed from non-core code.

Both BUG_ON()s in ide-probe.c were introduced in commit
   4015c949 ("[PATCH] update ide core")

when ide_unregister() was extended with semaphore based locking.  Both
checks won't complain about disabled preemption which is also wrong.

The might_sleep() in today's mutex_lock() will complain about the
missuses.

Remove the BUG_ON() statements.

Link: https://lkml.kernel.org/r/20201120092421.1023428-3-bigeasy@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

falconide_get_lock() is called by ide_lock_host() and its caller
(ide_issue_rq()) has already a might_sleep() check.

stdma_lock() has wait_event() which also has a might_sleep() check.

Remove the in_interrupt() check.

Link: https://lkml.kernel.org/r/20201113161021.2217361-2-bigeasy@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

and include <linux/const.h> in UAPI headers instead of <linux/kernel.h>.

The reason is to avoid indirect <linux/sysinfo.h> include when using
some network headers: <linux/netlink.h> or others -> <linux/kernel.h>
-> <linux/sysinfo.h>.

This indirect include causes on MUSL redefinition of struct sysinfo when
included both <sys/sysinfo.h> and some of UAPI headers:

    In file included from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/kernel.h:5,
                     from x86_64-buildroot-linux-musl/sysroot/usr/include/linux/netlink.h:5,
                     from ../include/tst_netlink.h:14,
                     from tst_crypto.c:13:
    x86_64-buildroot-linux-musl/sysroot/usr/include/linux/sysinfo.h:8:8: error: redefinition of `struct sysinfo'
     struct sysinfo {
            ^~~~~~~
    In file included from ../include/tst_safe_macros.h:15,
                     from ../include/tst_test.h:93,
                     from tst_crypto.c:11:
    x86_64-buildroot-linux-musl/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

Link: https://lkml.kernel.org/r/20201015190013.8901-1-petr.vorel@gmail.comSigned-off-by: Petr Vorel <petr.vorel@gmail.com>
Suggested-by: Rich Felker <dalias@aerifal.cx>
Acked-by: Rich Felker <dalias@libc.org>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kthread worker API is simple.  In short, it allows to create, use, and
destroy workers.  kthread_create_worker_on_cpu() just allows to bind a
newly created worker to a given CPU.

It is up to the API user how to handle CPU hotplug.  They have to decide
how to handle pending work items, prevent queuing new ones, and restore
the functionality when the CPU goes off and on.  There are few catches:

   + The CPU affinity gets lost when it is scheduled on an offline CPU.

   + The worker might not exist when the CPU was off when the user
     created the workers.

A good practice is to implement two CPU hotplug callbacks and
destroy/create the worker when CPU goes down/up.

Mention this in the function description.

[akpm@linux-foundation.org: grammar tweaks]

Link: https://lore.kernel.org/r/20201028073031.4536-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/20201102101039.19227-1-pmladek@suse.comReported-by: Zhang Qiang <Qiang.Zhang@windriver.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While migrating some code from wq to kthread_worker, I found that I missed
the execute_start/end tracepoints.  So add similar tracepoints for
kthread_work.  And for completeness, queue_work tracepoint (although this
one differs slightly from the matching workqueue tracepoint).

Link: https://lkml.kernel.org/r/20201010180323.126634-1-robdclark@gmail.comSigned-off-by: Rob Clark <robdclark@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Phil Auld <pauld@redhat.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vincent Donnefort <vincent.donnefort@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Ilias Stamatis <stamatis.iliass@gmail.com>
Cc: Liang Chen <cl@rock-chips.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 and membarrier fixes:

   - Correct a few problems in the x86 and the generic membarrier
     implementation. Small corrections for assumptions about visibility
     which have turned out not to be true.

   - Make the PAT bits for memory encryption correct vs 4K and 2M/1G
     page table entries as they are at a different location.

   - Fix a concurrency issue in the the local bandwidth readout of
     resource control leading to incorrect values

   - Fix the ordering of allocating a vector for an interrupt. The order
     missed to respect the provided cpumask when the first attempt of
     allocating node local in the mask fails. It then tries the node
     instead of trying the full provided mask first. This leads to
     erroneous error messages and breaking the (user) supplied affinity
     request. Reorder it.

   - Make the INT3 padding detection in optprobe work correctly"

* tag 'x86-urgent-2020-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe to detect INT3 padding correctly
  x86/apic/vector: Fix ordering in vector assignment
  x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled
  x86/mm/mem_encrypt: Fix definition of PMD_FLAGS_DEC_WP
  membarrier: Execute SYNC_CORE on the calling thread
  membarrier: Explicitly sync remote cores when SYNC_CORE is requested
  membarrier: Add an actual barrier before rseq_preempt()
  x86/membarrier: Get rid of a dubious optimization

Pull block fixes from Jens Axboe:
 "This should be it for 5.10.

  Mike and Song looked into the warning case, and thankfully it appears
  the fix was pretty trivial - we can just change the md device chunk
  type to unsigned int to get rid of it. They cannot currently be < 0,
  and nobody is checking for that either.

  We're reverting the discard changes as the corruption reports came in
  very late, and there's just no time to attempt to deal with it at this
  point. Reverting the changes in question is the right call for 5.10"

* tag 'block-5.10-2020-12-12' of git://git.kernel.dk/linux-block:
  md: change mddev 'chunk_sectors' from int to unsigned
  Revert "md: add md_submit_discard_bio() for submitting discard bio"
  Revert "md/raid10: extend r10bio devs to raid disks"
  Revert "md/raid10: pull codes that wait for blocked dev into one function"
  Revert "md/raid10: improve raid10 discard request"
  Revert "md/raid10: improve discard request for far layout"
  Revert "dm raid: remove unnecessary discard limits for raid10"

Pull SCSI fixes from James Bottomley:
 "Five small fixes.  Four in drivers:

   - hisi_sas: fix internal queue timeout

   - be2iscsi: revert a prior fix causing problems

   - bnx2i: add missing dependency

   - storvsc: late arriving revert of a problem fix

  and one in the core.

  The core one is a minor change to stop paying attention to the busy
  count when returning out of resources because there's a race window
  where the queue might not restart due to missing returning I/O"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()"
  scsi: hisi_sas: Select a suitable queue for internal I/Os
  scsi: core: Fix race between handling STS_RESOURCE and completion
  scsi: be2iscsi: Revert "Fix a theoretical leak in beiscsi_create_eqs()"
  scsi: bnx2i: Requires MMU

Pull i2c fix from Wolfram Sang:
 "Bugfix for the AT24 EEPROM driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  misc: eeprom: at24: fix NVMEM name with custom AT24 device name

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for ARM, x86 and tools"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools/kvm_stat: Exempt time-based counters
  KVM: mmu: Fix SPTE encoding of MMIO generation upper half
  kvm: x86/mmu: Use cpuid to determine max gfn
  kvm: svm: de-allocate svm_cpu_data for all cpus in svm_cpu_uninit()
  selftests: kvm/set_memory_region_test: Fix race in move region test
  KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
  KVM: arm64: Fix handling of merging tables into a block entry
  KVM: arm64: Fix memory leak on stage2 update of a valid PTE

Pull xen fixes from Juergen Gross:
 "A short series fixing a regression introduced in 5.9 for running as
  Xen dom0 on a system with NVMe backed storage"

* tag 'for-linus-5.10c-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: don't use page->lru for ZONE_DEVICE memory
  xen: add helpers for caching grant mapping pages

Pull RISC-V fix from Palmer Dabbelt:
 "Just one fix. It's nothing critical, just a randconfig that wasn't
  building. That said, it does seem pretty safe and is technically a
  regression so I'm sending it along for 5.10:

   - define get_cycles64() all the time, as it's used by most
     configurations"

* tag 'riscv-for-linus-5.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define get_cycles64() regardless of M-mode

Pull io_uring fixes from Jens Axboe:
 "Two fixes in here, fixing issues introduced in this merge window"

* tag 'io_uring-5.10-2020-12-11' of git://git.kernel.dk/linux-block:
  io_uring: fix file leak on error path of io ctx creation
  io_uring: fix mis-seting personality's creds

Pull input fixes from Dmitry Torokhov:

 - a fix for cm109 stomping on its own control URB if it tries to toggle
   buzzer immediately after userspace opens input device (found by
   syzcaller)

 - another fix for Raydium touchscreens that do not like splitting
   command transfers

 - quirks for i8042, soc_button_array, and goodix drivers to make them
   work better with certain hardware.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: goodix - add upside-down quirk for Teclast X98 Pro tablet
  Input: cm109 - do not stomp on control URB
  Input: i8042 - add Acer laptops to the i8042 reset list
  Input: cros_ec_keyb - send 'scancodes' in addition to key events
  Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list
  Input: raydium_ts_i2c - do not split tx transactions

Commit e2782f56 ("Revert "dm raid: remove unnecessary discard
limits for raid10"") exposed compiler warnings introduced by commit
e0910c8e ("dm raid: fix discard limits for raid1 and raid10"):

In file included from ./include/linux/kernel.h:14,
                 from ./include/asm-generic/bug.h:20,
                 from ./arch/x86/include/asm/bug.h:93,
                 from ./include/linux/bug.h:5,
                 from ./include/linux/mmdebug.h:5,
                 from ./include/linux/gfp.h:5,
                 from ./include/linux/slab.h:15,
                 from drivers/md/dm-raid.c:8:
drivers/md/dm-raid.c: In function ‘raid_io_hints’:
./include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
  (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                            ^~
./include/linux/minmax.h:32:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
./include/linux/minmax.h:42:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
./include/linux/minmax.h:51:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
./include/linux/minmax.h:84:39: note: in expansion of macro ‘min’
  __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
                                       ^~~
drivers/md/dm-raid.c:3739:33: note: in expansion of macro ‘min_not_zero’
   limits->max_discard_sectors = min_not_zero(rs->md.chunk_sectors,
                                 ^~~~~~~~~~~~

Fix this by changing the chunk_sectors member of 'struct mddev' from
int to 'unsigned int' to match the type used for the 'chunk_sectors'
member of 'struct queue_limits'.  Various MD code still uses 'int' but
none of it appears to ever make use of signed int; and storing
positive signed int in unsigned is perfectly safe.
Reported-by: Song Liu <songliubraving@fb.com>
Fixes: e2782f56 ("Revert "dm raid: remove unnecessary discard limits for raid10"")
Fixes: e0910c8e ("dm raid: fix discard limits for raid1 and raid10")
Cc: stable@vger,kernel.org # e0910c8e was marked for stable@
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit

  7705dc85 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")

changed the padding bytes between functions from NOP to INT3. However,
when optprobe decodes a target function it finds INT3 and gives up the
jump optimization.

Instead of giving up any INT3 detection, check whether the rest of the
bytes to the end of the function are INT3. If all of them are INT3,
those come from the linker. In that case, continue the optprobe jump
optimization.

 [ bp: Massage commit message. ]

Fixes: 7705dc85 ("x86/vmlinux: Use INT3 instead of NOP for linker fill bytes")
Reported-by: Adam Zabrocki <pi3@pi3.com.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160767025681.3880685.16021570341428835411.stgit@devnote2

The touchscreen on the Teclast x98 Pro is also mounted upside-down in
relation to the display orientation.
Signed-off-by: Simon Beginn <linux@simonmicro.de>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhostSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>