- 01 Jul, 2017 40 commits
-
-
Tonghao Zhang authored
When compiling OvS-master on 4.4.0-81 kernel, there is a warning: CC [M] /root/ovs/datapath/linux/datapath.o /root/ovs/datapath/linux/datapath.c: In function 'ovs_flow_cmd_set': /root/ovs/datapath/linux/datapath.c:1221:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] This patch factors out match-init and action-copy to avoid "Wframe-larger-than=1024" warning. Because mask is only used to get actions, we new a function to save some stack space. Signed-off-by:Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: remove typedefs from structures part 1 As we know, typedef is suggested not to use in kernel, even checkpatch.pl also gives warnings about it. Now sctp is using it for many structures. All this kind of typedef's using should be removed. As the 1st part, this patchset is to remove it for 11 basic structures in linux/sctp.h. It is also to fix some indents. No any code's logic is changed in these patches, only cleaning up. ==================== Signed-off-by: -
Xin Long authored
This patch is to remove the typedef sctp_init_chunk_t, and replace with struct sctp_init_chunk in the places where it's using this typedef. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_inithdr_t, and replace with struct sctp_inithdr in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_data_chunk_t, and replace with struct sctp_data_chunk in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_datahdr_t, and replace with struct sctp_datahdr in the places where it's using this typedef. It is also to use izeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
Remove this typedef, there is even no places using it. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_param_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to remove the useless declaration sctp_addip_addr_config and fix the lack of params for some other functions' declaration. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_paramhdr_t, and replace with struct sctp_paramhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
Xin Long authored
Remove this typedef, there is even no places using it. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_cid_t, and replace with struct sctp_cid in the places where it's using this typedef. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_chunkhdr_t, and replace with struct sctp_chunkhdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type)., especially in sctp_new. Signed-off-by:
-
Xin Long authored
This patch is to remove the typedef sctp_sctphdr_t, and replace with struct sctphdr in the places where it's using this typedef. It is also to fix some indents and use sizeof(variable) instead of sizeof(type). Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: introduce flower offload capabilities this series adds flower offload to the NFP driver. It builds on recent work to add representor and a skeleton flower app - now the app does what its name says. In general the approach taken is to allow some flows within the universe of possible flower matches and tc actions to be offloaded. It is planned that this support will grow over time but the support offered by this patch-set seems to be a reasonable starting point. Key Changes since v2: * Revised flow structures to simplify setup/teardown and locking of stats * Addressed other code-change review of v2 Other review questions regarding v2 have been answered on netdev. ==================== Signed-off-by: -
Pieter Jansen van Vuuren authored
Previously the flower offloads never sends messages to the hardware, and never registers a handler for receiving messages from hardware. This patch enables the flower offloads to send control messages to hardware when adding and removing flow rules. Additionally it registers a control message rx handler for receiving stats updates from hardware for each offloaded flow. Additionally this patch adds 4 control message types; Add, modify and delete flow, as well as flow stats. It also allows nfp_flower_cmsg_get_data() to be used outside of cmsg.c. Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Previously there was no way of updating flow rule stats after they have been offloaded to hardware. This is solved by keeping track of stats received from hardware and providing this to the TC handler on request. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Adds metadata describing the mask id of each flow and keeps track of flows installed in hardware. Previously a flow could not be removed from hardware as there was no way of knowing if that a specific flow was installed. This is solved by storing the offloaded flows in a hash table. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Adds push vlan, pop vlan, output and drop action capabilities to flower offloads. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Extends matching capabilities for flower offloads to include vlan, layer 2, layer 3 and layer 4 type matches. This includes both exact and wildcard matching. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Extends the flower flow add function by calculating which match fields are present in the flower offload structure and allocating the appropriate space to describe these. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Adds a flower based TC offload handler for representor devices, this is in addition to the bpf based offload handler. The changes in this patch will be used in a follow-up patch to add tc flower offload to the NFP. The flower app enables tc offloads on representors by default. Signed-off-by:
-
Simon Horman authored
Add phys_switch_id support by allowing lookup of SWITCHDEV_ATTR_ID_PORT_PARENT_ID via the nfp_repr_port_attr_get switchdev operation. This is visible to user-space in the phys_switch_id attribute of a netdev. e.g. cd /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 find . -name phys_switch_id | xargs grep . ./net/eth3/phys_switch_id:00154d1300bd ./net/eth4/phys_switch_id:00154d1300bd ./net/eth2/phys_switch_id:00154d1300bd grep: ./net/eth5/phys_switch_id: Operation not supported In the above eth2 and eth3 and representor netdevs for the first and second physical port. eth4 is the representor for the PF. And eth5 is the PF netdev. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Simon Horman authored
Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured and do nothing otherwise. This allows for slightly cleaner code which uses switchdev but does not select NET_SWITCHDEV. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Xin Long authored
ep->base.sk gets it's value since sctp_endpoint_new, nowhere will change it. So there's no need to check if it's null, as it can never be null. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Elena Reshetova says: ==================== v3 net generic subsystem refcount conversions Changes in v3: Rebased on top of the net-next tree. Changes in v2: No changes in patches apart from rebases, but now by default refcount_t = atomic_t (*) and uses all atomic standard operations unless CONFIG_REFCOUNT_FULL is enabled. This is a compromise for the systems that are critical on performance (such as net) and cannot accept even slight delay on the refcounter operations. This series, for core network subsystem components, replaces atomic_t reference counters with the new refcount_t type and API (see include/linux/refcount.h). By doing this we prevent intentional or accidental underflows or overflows that can led to use-after-free vulnerabilities. These patches contain only generic net pieces. Other changes will be sent separately. The patches are fully independent and can be cherry-picked separately. The big patches, such as conversions for sock structure, need a very detailed look from maintainers: refcount managing is quite complex in them and while it seems that they would benefit from the change, extra checking is needed. The biggest corner issue is the fact that refcount_inc() does not increment from zero. If there are no objections to the patches, please merge them via respective trees. * The respective change is currently merged into -next as "locking/refcount: Create unchecked atomic_t implementation". ==================== Signed-off-by: -
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
