- 04 Feb, 2015 21 commits
-
-
Johan Hovold authored
commit 0915e6fe upstream. The gpio device attributes were never destroyed when the gpio was unexported (or on export failures). Use device_create_with_groups() to create the default device attributes of the gpio class device. Note that this also fixes the attribute-creation race with userspace for these attributes. Remove contingent attributes in export error path and on unexport. Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> [ luis: backported to 3.16: - file rename: drivers/gpio/gpiolib-sysfs.c -> drivers/gpio/gpiolib.c ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Johan Hovold authored
commit 121b6a79 upstream. The gpio-chip device attributes were never destroyed when the device was removed. Fix by using device_create_with_groups() to create the device attributes of the chip class device. Note that this also fixes the attribute-creation race with userspace. Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
-
Alex Deucher authored
commit d8a74e18 upstream. This was accidently lost in 76a0df85. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ahmed S. Darwish authored
commit 5e7e6e0c upstream. Recent Leaf firmware versions (>= 3.1.557) do not allow to send commands for non-existing channels. If a command is sent for a non-existing channel, the firmware crashes. Reported-by:
Christopher Storah <Christopher.Storah@invetech.com.au> Signed-off-by:
Olivier Sobrie <olivier@sobrie.be> Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
commit 889b77f7 upstream. Flooding the Kvaser CAN to USB dongle with multiple reads and writes in very high frequency (*), closing the CAN channel while all the transmissions are on (#), opening the device again (@), then sending a small number of packets would make the driver enter an almost infinite loop of: [....] [15959.853988] kvaser_usb 4-3:1.0 can0: cannot find free context [15959.853990] kvaser_usb 4-3:1.0 can0: cannot find free context [15959.853991] kvaser_usb 4-3:1.0 can0: cannot find free context [15959.853993] kvaser_usb 4-3:1.0 can0: cannot find free context [15959.853994] kvaser_usb 4-3:1.0 can0: cannot find free context [15959.853995] kvaser_usb 4-3:1.0 can0: cannot find free context [....] _dragging the whole system down_ in the process due to the excessive logging output. Initially, this has caused random panics in the kernel due to a buggy error recovery path. That got fixed in an earlier commit.(%) This patch aims at solving the root cause. --> 16 tx URBs and contexts are allocated per CAN channel per USB device. Such URBs are protected by: a) A simple atomic counter, up to a value of MAX_TX_URBS (16) b) A flag in each URB context, stating if it's free c) The fact that ndo_start_xmit calls are themselves protected by the networking layers higher above After grabbing one of the tx URBs, if the driver noticed that all of them are now taken, it stops the netif transmission queue. Such queue is worken up again only if an acknowedgment was received from the firmware on one of our earlier-sent frames. Meanwhile, upon channel close (#), the driver sends a CMD_STOP_CHIP to the firmware, effectively closing all further communication. In the high traffic case, the atomic counter remains at MAX_TX_URBS, and all the URB contexts remain marked as active. While opening the channel again (@), it cannot send any further frames since no more free tx URB contexts are available. Reset all tx URB contexts upon CAN channel close. (*) 50 parallel instances of `cangen0 -g 0 -ix` (#) `ifconfig can0 down` (@) `ifconfig can0 up` (%) "can: kvaser_usb: Don't free packets when tight on URBs" Signed-off-by:
-
Ahmed S. Darwish authored
commit b442723f upstream. Flooding the Kvaser CAN to USB dongle with multiple reads and writes in high frequency caused seemingly-random panics in the kernel. On further inspection, it seems the driver erroneously freed the to-be-transmitted packet upon getting tight on URBs and returning NETDEV_TX_BUSY, leading to invalid memory writes and double frees at a later point in time. Note: Finding no more URBs/transmit-contexts and returning NETDEV_TX_BUSY is a driver bug in and out of itself: it means that our start/stop queue flow control is broken. This patch only fixes the (buggy) error handling code; the root cause shall be fixed in a later commit. Acked-by:
-
Oliver Hartkopp authored
commit 9b1087aa upstream. When changing flags in the CAN drivers ctrlmode the provided new content has to be checked whether the bits are allowed to be changed. The bits that are to be changed are given as a bitfield in cm->mask. Therefore checking against cm->flags is wrong as the content can hold any kind of values. The iproute2 tool sets the bits in cm->mask and cm->flags depending on the detected command line options. To be robust against bogus user space applications additionally sanitize the provided flags with the provided mask. Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Johan Hovold authored
commit 6798acaa upstream. Move direct and indirect calls to gpiochip_remove_pin_ranges outside of spin lock as they can end up taking a mutex in pinctrl_remove_gpio_range. Note that the pin ranges are already added outside of the lock. Fixes: 9ef0d6f7 ("gpiolib: call pin removal in chip removal function") Fixes: f23f1516 ("gpiolib: provide provision to register pin ranges") Signed-off-by:
-
Johan Hovold authored
commit 00acc3dc upstream. Fix memory leak and sleep-while-atomic in gpiochip_remove. The memory leak was introduced by afa82fab ("gpio / ACPI: Move event handling registration to gpiolib irqchip helpers") that moved the release of acpi interrupt resources to gpiochip_irqchip_remove, but by then the resources are no longer accessible as the acpi_gpio_chip has already been freed by acpi_gpiochip_remove. Note that this also fixes a few potential sleep-while-atomics, which has been around since 14250520 ("gpio: add IRQ chip helpers in gpiolib") when the call to gpiochip_irqchip_remove while holding a spinlock was added (a couple of irq-domain paths can end up grabbing mutexes). Fixes: afa82fab ("gpio / ACPI: Move event handling registration to gpiolib irqchip helpers") Fixes: 14250520 ("gpio: add IRQ chip helpers in gpiolib") Signed-off-by:
-
Johan Hovold authored
commit 5539b3c9 upstream. Memory allocated and references taken by of_gpiochip_add and acpi_gpiochip_add were never released on errors in gpiochip_add (e.g. failure to find free gpio range). Fixes: 391c970c ("of/gpio: add default of_xlate function if device has a node pointer") Fixes: 664e3e5a ("gpio / ACPI: register to ACPI events automatically") Signed-off-by:
-
Jim Lin authored
commit db93facf upstream. This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
-
Alex Deucher authored
commit 5615f890 upstream. This adds a quirks list to fix stability problems with certain SI boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Chris Wilson authored
commit 226e5ae9 upstream. If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared if the mutex debugging is enabled which introduces a race in our mutex_is_locked_by() - i.e. we may inspect the old owner value before it is acquired by the new task. This is the root cause of this error: diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c index 5cf6731..3ef3736 100644 --- a/kernel/locking/mutex-debug.c +++ b/kernel/locking/mutex-debug.c @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock) DEBUG_LOCKS_WARN_ON(lock->owner != current); DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next); - mutex_clear_owner(lock); } /* * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug * mutexes so that we can do it here after we've verified state. */ + mutex_clear_owner(lock); atomic_set(&lock->count, 1); } Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 48bf5b2d upstream. Like Ivybridge, we have reports that we get random hangs when flipping with multiple pipes. Extend commit 2a92d5bc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 8 10:40:29 2014 +0100 drm/i915: Disable RCS flips on Ivybridge to also apply to Haswell. Reported-and-tested-by:
Scott Tsai <scottt.tw@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87759Signed-off-by:
-
Dmitry Torokhov authored
commit 9333caea upstream. When KBC is in active multiplexing mode the touchpad on this laptop does not work. Reported-by:
Bilal Koc <koc.bilo@googlemail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sam hung authored
commit 810aa091 upstream. This change allows the driver to recognize newer Elantech touchpads. Signed-off-by:
Yi ju Hong <sam.hung@emc.com.tw> Signed-off-by:
-
Alex Deucher authored
commit 4369a69e upstream. Disable dpm on certain problematic boards rather than disabling dpm for the entire chip family since most boards work fine. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386534 https://bugzilla.kernel.org/show_bug.cgi?id=83731Signed-off-by:
-
Alex Deucher authored
commit 3a01fd36 upstream. We need to wait for the GPUVM flush to complete. There was some confusion as to how this mechanism was supposed to work. The operation is not atomic. For GPU initiated invalidations you need to read back a VM register to introduce enough latency for the update to complete. v2: drop gart changes v3: just read back rather than polling Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit d474ea7e upstream. We need to wait for the GPUVM flush to complete. There was some confusion as to how this mechanism was supposed to work. The operation is not atomic. For GPU initiated invalidations you need to read back a VM register to introduce enough latency for the update to complete. v2: drop gart changes v3: just read back rather than polling Reviewed-by:
-
Alex Deucher authored
commit cbfc35b9 upstream. We need to wait for the GPUVM flush to complete. There was some confusion as to how this mechanism was supposed to work. The operation is not atomic. For GPU initiated invalidations you need to read back a VM register to introduce enough latency for the update to complete. v2: drop gart changes v3: just read back rather than polling Reviewed-by:
-
Srihari Vijayaraghavan authored
commit 148e9a71 upstream. On some laptops, keyboard needs to be reset in order to successfully detect touchpad (e.g., some Gigabyte laptop models with Elantech touchpads). Without resettin keyboard touchpad pretends to be completely dead. Based on the original patch by Mateusz Jończyk this version has been expanded to include DMI based detection & application of the fix automatically on the affected models of laptops. This has been confirmed to fix problem by three users already on three different models of laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81331Signed-off-by:
Srihari Vijayaraghavan <linux.bug.reporting@gmail.com> Acked-by:
Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by:
Guillaum Bouchard <guillaum.bouchard@gmail.com> Signed-off-by:
-
- 02 Feb, 2015 5 commits
-
-
Sasha Levin authored
commit 6ada1fc0 upstream. An unvalidated user input is multiplied by a constant, which can result in an undefined behaviour for large values. While this is validated later, we should avoid triggering undefined behaviour. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> [jstultz: include trivial milisecond->microsecond correction noticed by Andy] Signed-off-by:
John Stultz <john.stultz@linaro.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Tobias Jakobi authored
commit 8c38d28b upstream. EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask produces a number outside the range 0x00 to 0xff, which always results in execution of the default switch statement. Obviously this is wrong and git history shows that the bitmask inversion was incorrectly set during a refactoring of the MCT code. Fix this by putting the inversion at the correct position again. Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Reported-by:
GP Orcullo <kinsamanka@gmail.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 9ea2aa8b upstream. Make sure there is enough room for the nfnetlink header in the netlink messages that are part of the batch. There is a similar check in netlink_rcv_skb(). Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
commit 3b05ac38 upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Luis Henriques authored
Signed-off-by:
-
- 26 Jan, 2015 3 commits
-
-
Geert Uytterhoeven authored
commit b0ddb319 upstream. The sh73a0 INTC can't mask interrupts properly most likely due to a hardware bug. Set the .control_parent flag to delegate masking to the parent interrupt controller, like was already done for irqpin1. Without this, accessing the three-axis digital accelerometer ADXL345 on kzm9g through /dev/input/event1 causes an interrupt storm, which requires a power-cycle to recover from. This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 341eb546 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0") Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Mugunthan V N authored
commit 69d2626f upstream. 64KiB is allocated for qspi dtb partition which is not sufficient, so updating the partition table size to 512KiB for device tree partition. This also aligns the QSPI partition definitions between kernel and U-Boot. Fixes: dc2dd5b8 ("ARM: dts: dra7: Add qspi device") Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
David Vrabel authored
commit dbdd7476 upstream. This reverts commit 2c3fc8d2. This commit broke on x86 PV because entries in the generic SWIOTLB are indexed using (pseudo-)physical address not DMA address and these are not the same in a x86 PV guest. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by:
-
- 23 Jan, 2015 3 commits
-
-
Chris Wilson authored
commit c4d69da1 upstream. Running igt, I was encountering the invalid TLB bug on my 845g, despite that it was using the CS workaround. Examining the w/a buffer in the error state, showed that the copy from the user batch into the workaround itself was suffering from the invalid TLB bug (the first cacheline was broken with the first two words reversed). Time to try a fresh approach. This extends the workaround to write into each page of our scratch buffer in order to overflow the TLB and evict the invalid entries. This could be refined to only do so after we update the GTT, but for simplicity, we do it before each batch. I suspect this supersedes our current workaround, but for safety keep doing both. v2: The magic number shall be 2. This doesn't conclusively prove that it is the mythical TLB bug we've been trying to workaround for so long, that it requires touching a number of pages to prevent the corruption indicates to me that it is TLB related, but the corruption (the reversed cacheline) is more subtle than a TLB bug, where we would expect it to read the wrong page entirely. Oh well, it prevents a reliable hang for me and so probably for others as well. Signed-off-by:
-
Alexander Y. Fomichev authored
commit 7ce64c79 upstream. __netdev_adjacent_dev_insert may add adjust device of different net namespace, without proper check it leads to emergence of broken sysfs links from/to devices in another namespace. Fix: rewrite netdev_adjacent_is_neigh_list macro as a function, move net_eq check into netdev_adjacent_is_neigh_list. (thanks David) related to: 4c75431aSigned-off-by:
Alexander Fomichev <git.user@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Miquel van Smoorenburg <mikevs@xs4all.net> Signed-off-by:
-
Alexander Y. Fomichev authored
commit 4c75431a upstream. Code manipulating sysfs symlinks on adjacent net_devices(s) currently doesn't take into account that devices potentially belong to different namespaces. This patch trying to fix an issue as follows: - check for net_ns before creating / deleting symlink. for now only netdev_adjacent_rename_links and __netdev_adjacent_dev_remove are affected, afaics __netdev_adjacent_dev_insert implies both net_devs belong to the same namespace. - Drop all existing symlinks to / from all adj_devs before switching namespace and recreate them just after. Signed-off-by:
-
- 22 Jan, 2015 8 commits
-
-
Hannes Reinecke authored
commit 6375f890 upstream. The SCSI command tag is set to the tag assigned from the block layer, not the SCSI-II tag message. So we need to convert it into the correct SCSI-II tag message based on the device flags, not the tag value itself. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [ luis: backported to 3.16: - adjusted context, as commit 506787a2 ("tcm_loop: Fix wrong I_T nexus association") had already been applied to 3.16 ] Signed-off-by:
-
Tomeu Vizoso authored
commit 10cdfe54 upstream. As __clk_release could call kfree on clk and then we wouldn't have a safe way of getting the module that owns the clock. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Fixes: fcb0ee6a ("clk: Implement clk_unregister") Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Tyler Baker authored
commit 41544f9f upstream. Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimusSigned-off-by:
Tyler Baker <tyler.baker@linaro.org> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 237d28db upstream. If the function graph tracer traces a jprobe callback, the system will crash. This can easily be demonstrated by compiling the jprobe sample module that is in the kernel tree, loading it and running the function graph tracer. # modprobe jprobe_example.ko # echo function_graph > /sys/kernel/debug/tracing/current_tracer # ls The first two commands end up in a nice crash after the first fork. (do_fork has a jprobe attached to it, so "ls" just triggers that fork) The problem is caused by the jprobe_return() that all jprobe callbacks must end with. The way jprobes works is that the function a jprobe is attached to has a breakpoint placed at the start of it (or it uses ftrace if fentry is supported). The breakpoint handler (or ftrace callback) will copy the stack frame and change the ip address to return to the jprobe handler instead of the function. The jprobe handler must end with jprobe_return() which swaps the stack and does an int3 (breakpoint). This breakpoint handler will then put back the saved stack frame, simulate the instruction at the beginning of the function it added a breakpoint to, and then continue on. For function tracing to work, it hijakes the return address from the stack frame, and replaces it with a hook function that will trace the end of the call. This hook function will restore the return address of the function call. If the function tracer traces the jprobe handler, the hook function for that handler will not be called, and its saved return address will be used for the next function. This will result in a kernel crash. To solve this, pause function tracing before the jprobe handler is called and unpause it before it returns back to the function it probed. Some other updates: Used a variable "saved_sp" to hold kcb->jprobe_saved_sp. This makes the code look a bit cleaner and easier to understand (various tries to fix this bug required this change). Note, if fentry is being used, jprobes will change the ip address before the function graph tracer runs and it will not be able to trace the function that the jprobe is probing. Link: http://lkml.kernel.org/r/20150114154329.552437962@goodmis.orgAcked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Amit Virdi authored
commit 39e60635 upstream. DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This means, the max TRBs that can be submitted for an EP is fixed to 32. Since the request queue for an EP is a linked list, any number of requests can be queued to it by the gadget layer. However, the dwc3 driver must not submit TRBs more than the pool it has created for. This limit wasn't respected when SG was used resulting in submitting more than the max TRBs, eventually leading to non-transfer of the TRBs submitted over the max limit. Root cause: When SG is used, there are two loops iterating to prepare TRBs: - Outer loop over the request_list - Inner loop over the SG list The code was missing break to get out of the outer loop. Fixes: eeb720fb (usb: dwc3: gadget: add support for SG lists) Signed-off-by:
Amit Virdi <amit.virdi@st.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Amit Virdi authored
commit ec512fb8 upstream. When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3 request (dwc3_request). So while preparing TRBs, the 'last' flag should be set only when it is the last TRB being prepared from the last dwc3_request entry. The current implementation uses list_is_last to check if the dwc3_request is the last entry from the request_list. However, list_is_last returns false for the last entry too. This is because, while preparing the first TRB from a request, the function dwc3_prepare_one_trb modifies the request's next and prev pointers while moving the URB to req_queued. Hence, list_is_last always returns false no matter what. The correct way is not to access the modified pointers of dwc3_request but to use list_empty macro instead. Fixes: e5ba5ec8 (usb: dwc3: gadget: fix scatter gather implementation) Signed-off-by:
-
Mugunthan V N authored
commit 25906052 upstream. Since ALE table is a common resource for both the interfaces in Dual EMAC mode and while bringing up the second interface in cpsw_ndo_set_rx_mode() all the multicast entries added by the first interface is flushed out and only second interface multicast addresses are added. Fixing this by flushing multicast addresses based on dual EMAC port vlans which will not affect the other emac port multicast addresses. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Signed-off-by:
-
Jisheng Zhang authored
commit b71e8ecd upstream. The "smemc" clock is removed on BG2Q SoCs. In fact, bit19 of clkenable register is for nfc. Current code use bit19 for non-exist "smemc" incorrectly, this prevents eMMC from working due to the sdhci's "core" clk is still gated. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
-
