- 22 May, 2015 2 commits
-
-
Saravana Kannan authored
In order to prepare for the next few commits, that will stop migrating sysfs files on cpu hotplug, this patch starts managing sysfs-cpu separately. The behavior is still the same as we are still migrating sysfs files on hotplug, later commits would change that. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Shailendra Verma authored
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 15 May, 2015 6 commits
-
-
Viresh Kumar authored
Later commits would change the way policies are managed today. Policies wouldn't be freed on cpu hotplug (currently they aren't freed on suspend), and while the CPU is offline, the sysfs cpufreq files would still be present. Because we don't mark policy->governor as NULL, it still contains pointer of the last used governor. And if the governor is removed, while all the CPUs of a policy are hotplugged out, this pointer wouldn't be valid anymore. And if we try to read the 'scaling_governor', etc. from sysfs, it will result in kernel OOPs. To prevent this, mark policy->governor as NULL for all inactive policies while the governor is removed from kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
History of which governor was used last is common to all CPUs within a policy and maintaining it per-cpu isn't the best approach for sure. Apart from wasting memory, this also increases the complexity of managing this data structure as it has to be updated for all CPUs. To make that somewhat simpler, lets store this information in a new field 'last_governor' in struct cpufreq_policy and update it on removal of last cpu of a policy. As a side-effect it also solves an old problem, consider a system with two clusters 0 & 1. And there is one policy per cluster. Cluster 0: CPU0 and 1. Cluster 1: CPU2 and 3. - CPU2 is first brought online, and governor is set to performance (default as cpufreq_cpu_governor wasn't set). - Governor is changed to ondemand. - CPU2 is taken offline and cpufreq_cpu_governor is updated for CPU2. - CPU3 is brought online. - Because cpufreq_cpu_governor wasn't set for CPU3, the default governor performance is picked for CPU3. This patch fixes the bug as we now have a single variable to update for policy. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
We reach here while adding policy for a CPU and enter into the 'if' block only if a policy already exists for the CPU. As cpufreq_cpu_data is set for all policy->related_cpus now, when the policy is first added, we can use that to find the CPU's policy instead of traversing the list of all active policies. Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
We can extract the same information from cpufreq_cpu_data as it is also available for inactive policies now. And so don't need cpufreq_cpu_data_fallback anymore. Also add a WARN_ON() for the case where we try to restore from an active policy. Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
Now that we can check policy->cpus to find if policy is active or not, we don't need to clean cpufreq_cpu_data and delete policy from the list on light weight tear down of policies (like in suspend). To make it consistent and clean, set cpufreq_cpu_data for all related CPUs when the policy is first created and clean it only while it is freed. Also update cpufreq_cpu_get_raw() to check if cpu is part of policy->cpus mask, so that we don't end up getting policies for offline CPUs. In order to make sure that no users of 'policy' are using an inactive policy, use cpufreq_cpu_get_raw() instead of directly accessing cpufreq_cpu_data. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
policy->cpus is cleared unconditionally now on hotplug-out of a CPU and it can be checked to know if a policy is active or not. Create helper routines to iterate over all active/inactive policies, based on policy->cpus field. Replace all instances of for_each_policy() with for_each_active_policy() to make them iterate only for active policies. (We haven't made changes yet to keep inactive policies in the same list, but that will be followed in a later patch). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 14 May, 2015 1 commit
-
-
Sudeep Holla authored
With the addition of switcher code, there's compile-time dependency on BIG_LITTLE to get arm_big_little driver compiling on ARM64. Since ARM64 will never add support for bL switcher, it's better to remove the dependency so that the driver can be reused on ARM64 platforms. This patch adds stubs to remove BIG_LITTLE dependency in the driver. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 12 May, 2015 1 commit
-
-
Joe Konno authored
Commit 007bea09 (intel_pstate: Add setting voltage value for baytrail P states.) introduced byt_set_pstate() with the assumption that it would always be run by the CPU whose MSR is to be written by it. It turns out, however, that is not always the case in practice, so modify byt_set_pstate() to enforce the MSR write done by it to always happen on the right CPU. Fixes: 007bea09 (intel_pstate: Add setting voltage value for baytrail P states.) Signed-off-by: Joe Konno <joe.konno@intel.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 May, 2015 5 commits
-
-
Viresh Kumar authored
We clear policy->cpus mask while CPUs are hotplugged out. We do it for all CPUs except the last CPU of the policy. I don't remember what the rationale behind that was, but I couldn't think of anything that will break if we remove this conditional clearing and always clear policy->cpus. The benefit we get out of it is, we can know if a policy is active or not by checking if this field is empty or not. That will be used by later commits. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
There are two cases when we may try to add CPUs we're already handling: - On boot, the first cpu has marked all policy->cpus managed and so we will find policy for all other policy->cpus later on. - When a managed cpu is hotplugged out and later brought back in. Currently, separate paths and checks take care of the two. While the first one is detected by testing cpu against 'policy->cpus', the other one is detected by testing cpu against 'policy->related_cpus'. We can handle them both via a single path and there is no need to do special checking for the first one. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> [ rjw: Changelog, comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
Simply returning here with an error is not enough. It shouldn't be allowed at all to try calling cpufreq_cpu_get() for an invalid CPU. Add a WARN here to make it clear that it wouldn't be acceptable at all. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
cpufreq_add_dev() is an unnecessary wrapper over __cpufreq_add_dev(). Merge them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Viresh Kumar authored
This clearly states what the code inside these routines is doing and how these must be used. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 05 May, 2015 1 commit
-
-
Wang Long authored
The file 'Documentation/cpu-freq/user-guide.txt' has duplicate description of sysfs interface 'scaling_driver'. [first] scaling_driver : this file shows what cpufreq driver is used to set the frequency on this CPU [second] scaling_driver : Hardware driver for cpufreq. Although this does not affect anything, I think we should only have one. so delete the second one because the first one is described in more detail. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 04 May, 2015 8 commits
-
-
Doug Smythies authored
The intel_pstate driver is difficult to debug and investigate without tsc. Also, it is likely use of tsc, and some version of C0 percentage, will be re-introdcued in futute. There have also been occasions where it is desirebale to know, and confirm, the previous target pstate. This patch brings back tsc, adds previous target pstate, and adds both to the trace data collection. Signed-off-by: Doug Smythies <dsmythies@telus.net> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Sudeep Holla authored
The "cpu-cluster.<n>" used to get the cluster clock is not used by any platform. Moreover __of_clk_get_by_name used in clk_get return error if the "clock-names" in the DT doesn't match this string. When using DT, it's not compulsory to specify the clock name unless there are multiple clock input entries in the consumer. This patch removes the unused clock string from the driver. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Sudeep Holla authored
The actual frequency is set through "clk_change_rate" which is void function. If the underlying hardware fails and returns error, the error is lost in the clk layer. In order to track such failures, we need to read back the frequency(just the cached value as clk_recalc called after clk->ops->set_rate gets the frequency) This patch adds check to see if the frequency is set correctly or if they were any hardware failures and sends the appropriate errors to the cpufreq core. Reviewed-by: Michael Turquette <mike.turquette@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Fabian Frederick authored
pxa255_run_freqs and pxa255_turbo_freqs are only read. This patch updates arrays declaration, find_freq_tables() and its callsites. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Fabian Frederick authored
typedef is not really useful here. Replace it by structure to improve readability. typedef should only be used in some cases. (See Documentation/CodingStyle Chapter 5 for details). Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
- 03 May, 2015 8 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchipDave Airlie authored
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
Jan Kara authored
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
-
Davide Italiano authored
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by: Davide Italiano <dccitaliano@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Lukas Czerner authored
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 02 May, 2015 7 commits
-
-
Chanho Park authored
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d8 and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Herbert Xu authored
This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ...
-
Stefan Hajnoczi authored
Here the "other side" refers to the guest or host. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph RBD fix from Sage Weil. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: end I/O the entire obj_request on error
-
David S. Miller authored
If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Wen Xu <hotdog3645@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 May, 2015 1 commit
-
-
Ilya Dryomov authored
When we end I/O struct request with error, we need to pass obj_request->length as @nr_bytes so that the entire obj_request worth of bytes is completed. Otherwise block layer ends up confused and we trip on rbd_assert(more ^ (which == img_request->obj_request_count)); in rbd_img_obj_callback() due to more being true no matter what. We already do it in most cases but we are missing some, in particular those where we don't even get a chance to submit any obj_requests, due to an early -ENOMEM for example. A number of obj_request->xferred assignments seem to be redundant but I haven't touched any of obj_request->xferred stuff to keep this small and isolated. Cc: Alex Elder <elder@linaro.org> Cc: stable@vger.kernel.org # 3.10+ Reported-by: Shawn Edwards <lesser.evil@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-