- 15 Mar, 2022 39 commits
-
-
James Smart authored
This patch refactors the FDISC paths to use SLI-4 as the primary interface: - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-10-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
This patch refactors the LS_RJT paths to use SLI-4 as the primary interface: - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-9-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
This patch refactors the LS_ACC paths to use SLI-4 as the primary interface: - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
This patch refactors the SLI3/SLI4 RSCN/SCR/RDF/EDC/FARPR paths to use SLI-4 as the primary interface: - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
This patch refactors the PLOGI/PRLI/ADISC/LOGO paths to use SLI-4 as the primary interface: - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. Link: https://lore.kernel.org/r/20220225022308.16486-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The patch refactors the general ELS handling paths to migrate to SLI-4 structures or common element abstractions. The fabric login paths are revised as part of this patch: - New generic lpfc_sli_prep_els_req_rsp jump table routine - Introduce ls_rjt_error_be and ulp_bde64_le unions to correct legacy endianness assignments - Conversion away from using SLI-3 iocb structures to set/access fields in common routines. Use the new generic get/set routines that were added. This move changes code from indirect structure references to using local variables with the generic routines. - Refactor routines when setting non-generic fields, to have both SLI3 and SLI4 specific sections. This replaces the set-as-SLI3 then translate to SLI4 behavior of the past. - Clean up poor indentation on some of the ELS paths Link: https://lore.kernel.org/r/20220225022308.16486-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Introduce lpfc_prep_wqe routine. The lpfc_prep_wqe() routine is used with lpfc_sli_issue_iocb() and lpfc_sli_issue_iocb_wait(). The routine performs additional SLI-4 wqe field setting that the generic routines did not perform as they kept their actions compatible with both SLI3 and SLI4. Link: https://lore.kernel.org/r/20220225022308.16486-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Convert the SLI4 fast and slow paths to use native SLI4 wqe constructs instead of iocb SLI3-isms. Includes the following: - Create simple get_xxx and set_xxx routines to wrapper access to common elements in both SLI3 and SLI4 commands - allowing calling routines to avoid sli-rev-specific structures to access the elements. - using the wqe in the job structure as the primary element - use defines from SLI-4, not SLI-3 - Removal of iocb to wqe conversion from fast and slow path - Add below routines to handle fast path lpfc_prep_embed_io - prepares the wqe for fast path lpfc_wqe_bpl2sgl - manages bpl to sgl conversion lpfc_sli_wqe2iocb - converts a WQE to IOCB for SLI-3 path - Add lpfc_sli3_iocb2wcqecmpl in completion path to convert an SLI-3 iocb completion to wcqe completion - Refactor some of the code that works on both revs for clarity Link: https://lore.kernel.org/r/20220225022308.16486-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Currently, SLI3 and SLI4 data paths use the same lpfc_iocbq structure. This is a "common" structure but many of the components refer to sli-rev specific entities which can lead the developer astray as to what they actually mean, should be set to, or when they should be used. This first patch prepares the lpfc_iocbq structure so that elements common to both SLI3 and SLI4 data paths are more appropriately named, making it clear they apply generically. Fieldnames based on 'iocb' (sli3) or 'wqe' (sli4) which are actually generic to the paths are renamed to 'cmd': - iocb_flag is renamed to cmd_flag - lpfc_vmid_iocb_tag is renamed to lpfc_vmid_tag - fabric_iocb_cmpl is renamed to fabric_cmd_cmpl - wait_iocb_cmpl is renamed to wait_cmd_cmpl - iocb_cmpl and wqe_cmpl are combined and renamed to cmd_cmpl - rsvd2 member is renamed to num_bdes due to pre-existing usage The structure name itself will retain the iocb reference as changing to a more relevant "job" or "cmd" title induces many hundreds of line changes for only a name change. lpfc_post_buffer is also renamed to lpfc_sli3_post_buffer to indicate use in the SLI3 path only. Link: https://lore.kernel.org/r/20220225022308.16486-2-jsmart2021@gmail.comCo-developed-by:
-
Julia Lawall authored
Use kcalloc() instead of kmalloc() + memset(). Link: https://lore.kernel.org/r/20220313141847.109804-1-Julia.Lawall@inria.frSuggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-26-Julia.Lawall@inria.frSigned-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-25-Julia.Lawall@inria.frSigned-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-18-Julia.Lawall@inria.frSigned-off-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220314115354.144023-3-Julia.Lawall@inria.frSigned-off-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220310092604.22950-14-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Shreyas Deodhar authored
Increase max limit of ql2xnvme_queues to (max_qpair - 1). Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com Fixes: 65120de2 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues") Cc: stable@vger.kernel.org Reviewed-by:
Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by:
-
Manish Rangankar authored
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending incorrect type field for NVMe supported device. Use correct feature type field. Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com Fixes: e374f9f5 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface") Cc: stable@vger.kernel.org Reviewed-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
-
Quinn Tran authored
Remove stale recovery code that prevents normal path recovery. Link: https://lore.kernel.org/r/20220310092604.22950-11-njavali@marvell.com Fixes: 1cbc0efc ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY") Cc: stable@vger.kernel.org Reviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
While a session is in the middle of a relogin, a late RSCN can be delivered from switch. RSCN trigger fabric scan where the scan logic can trigger another session login while a login is in progress. Reduce the extra trigger to prevent multiple logins to the same session. Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com Fixes: bee8b846 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
For session recovery, driver relies on the dpc thread to initiate certain operations. The dpc thread runs exclusively without the Mailbox interface being occupied. A recent code change for heartbeat check via mailbox cmd 0 is preventing the dpc thread from carrying out its operation. This patch allows the higher priority error recovery to run first before running the lower priority heartbeat check. Link: https://lore.kernel.org/r/20220310092604.22950-9-njavali@marvell.com Fixes: d94d8158 ("scsi: qla2xxx: Add heartbeat check") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
User experienced device lost. The log shows Get port data base command was queued up, failed, and requeued again. Every time it is requeued, it set the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring because driver thinks a recovery is in progress for this session. In essence, this session is hung. The reason it gets into this place is the session deletion got in front of this call due to link perturbation. Break the requeue cycle and exit. The session deletion code will trigger a session relogin. Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This is not consistent. Delete the session to restart the connection where ELS pass through PLOGI would be used consistently. Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com Fixes: c76ae845 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
During purex packet handling the driver was incorrectly freeing a pre-allocated structure. Fix this by skipping that entry. System crashed with the following stack during a module unload test. Call Trace: sbitmap_init_node+0x7f/0x1e0 sbitmap_queue_init_node+0x24/0x150 blk_mq_init_bitmaps+0x3d/0xa0 blk_mq_init_tags+0x68/0x90 blk_mq_alloc_map_and_rqs+0x44/0x120 blk_mq_alloc_set_map_and_rqs+0x63/0x150 blk_mq_alloc_tag_set+0x11b/0x230 scsi_add_host_with_dma.cold+0x3f/0x245 qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx] Call Trace with slub_debug and debug kernel: kasan_report_invalid_free+0x50/0x80 __kasan_slab_free+0x137/0x150 slab_free_freelist_hook+0xc6/0x190 kfree+0xe8/0x2e0 qla2x00_free_device+0x3bb/0x5d0 [qla2xxx] qla2x00_remove_one+0x668/0xcf0 [qla2xxx] Link: https://lore.kernel.org/r/20220310092604.22950-6-njavali@marvell.com Fixes: 62e9dd17 ("scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests") Cc: stable@vger.kernel.org Reported-by:
Marco Patalano <mpatalan@redhat.com> Tested-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Arun Easi authored
At NVMe ELS request time, request structure is DMA mapped and never unmapped. Fix this by calling the unmap on ELS completion. Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
Driver registration of localport can race when it happens at the remote port discovery time. Fix this by calling the registration under a mutex. Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reported-by:
-
Quinn Tran authored
User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing. Set the online state before reporting of the availability of the session. Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf0434 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
User experienced no task management error while target device is responding with error. The RSP_CODE field in the status IOCB is in little endian. Driver assumes it's big endian and it picked up erroneous data. Convert the data back to big endian as is on the wire. Link: https://lore.kernel.org/r/20220310092604.22950-2-njavali@marvell.com Fixes: faef62d1 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: stable@vger.kernel.org Reviewed-by:
-
Wenchao Hao authored
Commit 1b8d0300 ("scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()") fixed an UAF in iscsi_conn_get_param() and introduced 2 tmp_xxx varibles. We can gracefully fix this UAF with the help of device_del(). Calling iscsi_remove_conn() at the beginning of iscsi_conn_teardown would make userspace unable to see iscsi_cls_conn. This way we we can free memory safely. Remove iscsi_destroy_conn() since it is no longer used. Link: https://lore.kernel.org/r/20220310015759.3296841-4-haowenchao@huawei.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Wenchao Hao <haowenchao@huawei.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
-
Wenchao Hao authored
iscsi_create_conn() exposed iscsi_cls_conn to sysfs prior to initialization of iscsi_conn's dd_data. When userspace tried to access an attribute such as the connect address, a NULL pointer dereference was observed. Do not add iscsi_cls_conn to sysfs until it has been initialized. Remove iscsi_create_conn() since it is no longer used. Link: https://lore.kernel.org/r/20220310015759.3296841-3-haowenchao@huawei.comReviewed-by:
-
Wenchao Hao authored
- iscsi_alloc_conn(): Allocate and initialize iscsi_cls_conn - iscsi_add_conn(): Expose iscsi_cls_conn to userspace via sysfs - iscsi_remove_conn(): Remove iscsi_cls_conn from sysfs Link: https://lore.kernel.org/r/20220310015759.3296841-2-haowenchao@huawei.comReviewed-by:
-
Yang Li authored
The smatch tool reported the following warning: drivers/scsi/scsi_error.c:1988 scsi_decide_disposition() warn: ignoring unreachable code. Remove the "default:return FAILED;" instead of "return FAILED;" reported by smatch, because compilers can provide more useful diagnostics about switch/case statements that do not have a default statement, especially if the "switch" applies to a value with enumeration type. Link: https://lore.kernel.org/r/20220301080448.112813-1-yang.lee@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
Eliminate the following smatch warning: drivers/scsi/megaraid/megaraid_sas_fusion.c:5104 megasas_reset_fusion() warn: inconsistent indenting Link: https://lore.kernel.org/r/20220225011605.130927-1-yang.lee@linux.alibaba.comReported-by:
-
Jiapeng Chong authored
Eliminate the following smatch warning: drivers/scsi/aacraid/linit.c:867 aac_eh_tmf_hard_reset_fib() warn: inconsistent indenting. Link: https://lore.kernel.org/r/20220309005031.126504-1-jiapeng.chong@linux.alibaba.comReported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Mingzhe Zou authored
The RX/TX threads for iSCSI connection can be scheduled to any online CPUs, and will not be rescheduled. When binding other heavy load threads along with iSCSI connection RX/TX thread to the same CPU, the iSCSI performance will be worse. Add iscsi/cpus_allowed_list in configfs. The available CPU set of iSCSI connection RX/TX threads is allowed_cpus & online_cpus. If it is modified, all RX/TX threads will be rescheduled. Link: https://lore.kernel.org/r/20220301075500.14266-1-mingzhe.zou@easystack.cnReviewed-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
-
John Garry authored
Use the common libsas internal abort functionality. In addition, this driver has special handling for internal abort timeouts - specifically whether to reset the controller in that instance, so extend the API for that. Timeout is now increased to 20 * Hz from 6 * Hz. We also retry for failure now, but this should not make a difference. Link: https://lore.kernel.org/r/1647001432-239276-5-git-send-email-john.garry@huawei.comTested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
New special handling is added for SAS_PROTOCOL_INTERNAL_ABORT proto so that we may use the common queue command API. Link: https://lore.kernel.org/r/1647001432-239276-4-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
Add support for a "device" variant of internal abort, which will abort all pending I/Os for a specific device. Link: https://lore.kernel.org/r/1647001432-239276-3-git-send-email-john.garry@huawei.comTested-by:
-
John Garry authored
The internal abort feature is common to hisi_sas and pm8001 HBAs, and the driver support is similar also, so add a common handler. Two modes of operation will be supported: - single: Abort a single tagged command - device: Abort all commands associated with a specific domain device A new protocol is added, SAS_PROTOCOL_INTERNAL_ABORT, so the common queue command API may be re-used. Only add "single" support as a first step. Link: https://lore.kernel.org/r/1647001432-239276-2-git-send-email-john.garry@huawei.comTested-by:
-
James Smart authored
The soft_wwpn/soft_wwn functionality, which allows the driver to modify service parameters in an attempt to override the adapter-assigned WWN, was originally attempted to be removed roughly 6 yrs ago as new fabric features were being introduced that clashed with the implementation. In the end, the feature was left in with the user being responsible if things went south. We've reached a point where soft_wwn is no longer functional and is failing in almost all production use cases. Use of Fabric features such as Fabric Assigned WWPN and Automatic DPORT is now prevalent and the features require coordination between the adapter and driver that can't be solved by the simplistic update of the service parameters. As it is no longer functional, the feature is to be removed. There are still ways to override the adapter-assigned WWN but they require the admin to invoke bios/efi level menus. Link: https://lore.kernel.org/r/20220310154845.11125-1-jsmart2021@gmail.comReviewed-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
- 09 Mar, 2022 1 commit
-
-
Peter Wang authored
When ufs initializes without scmd->device->sector_size set, scsi_get_lba() will get a wrong shift number and trigger an ubsan error. The shift exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka 'unsigned long long'). Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP. Link: https://lore.kernel.org/r/20220307111752.10465-1-peter.wang@mediatek.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Peter Wang <peter.wang@mediatek.com> Signed-off-by:
-
