1. 02 Nov, 2005 27 commits
  2. 01 Nov, 2005 13 commits
    • Deepak Saxena's avatar
      [ARM] 3081/1: Remove GTWX5715 from ixp4xx_defconfig · 73ee723e
      Deepak Saxena authored
      Patch from Deepak Saxena
      
      CONFIG_MACH_GTWX5715 hardcodes the machine type in head-xscale.S so we
      can no longer boot on any other machine types. The proper fix would be
      to remove the hardcoding, but that machine is an off-the-shelf system
      and most users won't have access to the bootloader. :(
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      73ee723e
    • Dan Williams's avatar
      [ARM] 3079/1: Fix typo in i2c-iop3xx.c (invalid pointer passed to release_mem_region) · fbd9a6d7
      Dan Williams authored
      Patch from Dan Williams
      
      * If request_irq fails then a call to release_mem_region will be made with an invalid pointer.
      * Two formatting fixes
      Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      fbd9a6d7
    • Lennert Buytenhek's avatar
      [ARM] 3052/1: add ixp2000 microcode loader · d01e8897
      Lennert Buytenhek authored
      Patch from Lennert Buytenhek
      
      This patch adds a microcode loader for the ixp2000 architecture.
      
      The ixp2000 is an xscale-based CPU with a number of additional small
      CPUs ('microengines') on die that can be programmed to do various
      things.  Depending on the ixp2000 model, there are between 2 and 16
      microengines.
      
      This code provides an API that allows configuring the microengines,
      loading code into them, and starting and stopping them and reading
      out a number of status registers, and is used by the microengine
      network driver that was recently announced to netdev.
      Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      d01e8897
    • Nicolas Pitre's avatar
      [ARM] 2948/1: new preemption safe copy_{to|from}_user implementation · fadab094
      Nicolas Pitre authored
      Patch from Nicolas Pitre
      
      This patch provides a preemption safe implementation of copy_to_user
      and copy_from_user based on the copy template also used for memcpy.
      It is enabled unconditionally when CONFIG_PREEMPT=y.  Otherwise if the
      configured architecture is not ARMv3 then it is enabled as well as it
      gives better performances at least on StrongARM and XScale cores.  If
      ARMv3 is not too affected or if it doesn't matter too much then
      uaccess.S could be removed altogether.
      Signed-off-by: default avatarNicolas Pitre <nico@cam.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      fadab094
    • Nicolas Pitre's avatar
      [ARM] 2947/1: copy template with new memcpy/memmove · 75494230
      Nicolas Pitre authored
      Patch from Nicolas Pitre
      
      This patch provides a new implementation for optimized memory copy
      functions on ARM.  It is made of two levels: a template that consists of
      the core copy code and separate files that define macros to be used with
      the core code depending on the type of copy needed. This allows for best
      performances while sharing the same core for implementing memcpy(),
      copy_from_user() and copy_to_user() for instance.
      
      Two reasons for this work:
      
      1) the current copy_to_user/copy_from_user implementation assumes no
         task switch will ever occur in the middle of each copied page making
         it completely unsafe with CONFIG_PREEMPT=y.
      
      2) current copy implementations are measurably suboptimal and optimizing
         different implementations separately is a pain and more opportunities
         for bugs.
      
      The reason for (1) is the fact that copy inside user pages are performed
      with the ldm instruction which has no mean for testing user protections
      and could possibly race with process preemption bypassing the COW mechanism
      for example.  This is a longstanding issue that we said ought to be fixed
      for about two years now.  The solution is to substitute those ldm insns
      with a series of ldrt or strt insns to enforce user memory protection.
      At least on StrongARM and XScale cores the ldm is not faster than the
      equivalent ldr/str insns with a warm i-cache so there is no measurable
      performance degradation with that change. The fact that the copy code is
      a template makes it pretty easy to reuse the same core code as for memcpy
      and benefit from the same performance optimizations.
      
      Now (2) is best demonstrated with actual throughput measurements.
      First, here is a summary of memcopy tests performed on a StrongARM core:
      
      	PTR alignment	buffer size	kernel version	this version
      	------------------------------------------------------------
      	  aligned	     32		 59.73		107.43
      	unaligned	     32		 61.31		 74.72
      	  aligned	    100		132.47		136.15
      	unaligned	    100	    	103.84		123.76
      	  aligned	   4096		130.67		130.80
      	unaligned	   4096	    	130.68		130.64
      	  aligned	1048576		 68.03		68.18
      	unaligned	1048576		 68.03		68.18
      
      The buffer size is in bytes and the measured speed in MB/s.  The copy
      was performed repeatedly with given buffer and throughput averaged over
      3 seconds.
      
      Here we can see that the current kernel version has a higher entry cost
      that shows up with small buffers.  As buffer size grows both implementation
      converge to the same throughput.
      
      Now here's the exact same test performed on an XScale core (PXA255):
      
      	PTR alignment	buffer size	kernel version	this version
      	------------------------------------------------------------
      	  aligned	     32		 46.99		 77.58
      	unaligned	     32		 53.61		 59.59
      	  aligned	    100		107.19		136.59
      	unaligned	    100		 83.61		 97.58
      	  aligned	   4096		129.13		129.98
      	unaligned	   4096		128.36		128.53
      	  aligned	1048576		 53.76		 59.41
      	unaligned	1048576		 33.67		 56.96
      
      Again we can see the entry setup cost being higher for the current kernel
      before getting to the main copy loop.  Then throughput results converge
      as long as the buffer remains in the cache. Then the 1MB case shows more
      differences probably due to better pld placement and/or less instruction
      interlocks in this proposed implementation.
      
      Disclaimer: The PXA system was running with slower clocks than the
      StrongARM system so trying to infer any conclusion by comparing those
      separate sets of results side by side would be completely inappropriate.
      
      So...  What this patch does is to replace both memcpy and memmove with
      an implementation based on the provided copy code template.  The memmove
      code is kept separate since it is used only if the memory areas involved
      do overlap in which case the code is a transposition of the template but
      with the copy occurring in the opposite direction (trying to fit that
      mode into the template turned it into a mess not worth it for memmove
      alone).  And obviously both memcpy and memmove were tested with all kinds
      of pointer alignments and buffer sizes to exercise all code paths for
      correctness.
      
      The next patch will provide the now trivial replacement implementation
      copy_to_user and copy_from_user.
      Signed-off-by: default avatarNicolas Pitre <nico@cam.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      75494230
    • Nicolas Pitre's avatar
      [ARM] 2946/2: split --arch_clear_user() out of lib/uaccess.S · a0c6fdb9
      Nicolas Pitre authored
      Patch from Nicolas Pitre
      
      Required for future enhancement patches.
      Signed-off-by: default avatarNicolas Pitre <nico@cam.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      a0c6fdb9
    • David Brownell's avatar
      [ARM] 3078/1: lubbock platform updates, mostly mmc detection · 85eb226c
      David Brownell authored
      Patch from David Brownell
      
      Lubbock updates:
      
        * Provide an address for the SMC91x chip that doesn't generate
          a boot-time warning (matching the EEPROM).
      
        * Update MMC support to (a) detect card insert/remove, and
          (b) report the readonly switch setting for SD cards.
      
      Previously, MMC/SD cards had to be present at boot time else they
      couldn't be detected.
      Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      85eb226c
    • Ben Dooks's avatar
      [ARM] 3077/1: S3C2410 - regs-iis.h missing mask for IISMOD_FS · 4ebc3364
      Ben Dooks authored
      Patch from Ben Dooks
      
      Add definition for S3C2410_IISMOD_FS_MASK
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      4ebc3364
    • Ben Dooks's avatar
      [ARM] 3076/1: S3C2410 - updated documentation for platfrom data init · 6ff8f59f
      Ben Dooks authored
      Patch from Ben Dooks
      
      Update the Documentation/arm/Samsung-S3C24XX to add
      example platform data initialisation, and add the
      linux-arm mailing list URL.
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      6ff8f59f
    • Ben Dooks's avatar
      [ARM] 3071/1: RX3715 - add lcd/fb platform setup · e838ffc2
      Ben Dooks authored
      Patch from Ben Dooks
      
      Platform data for the LCD/framebuffer driver for
      the RX3715 LCD panel.
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      e838ffc2
    • Lennert Buytenhek's avatar
      [ARM] 3065/1: ixp2000 typo and whitespace fixes · fa87cedd
      Lennert Buytenhek authored
      Patch from Lennert Buytenhek
      
      Misc ixp2000 typo and whitespace fixes.
      Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      fa87cedd
    • Lennert Buytenhek's avatar
      [ARM] 3064/1: start using ixp2000_reg_wrb · e9b72e43
      Lennert Buytenhek authored
      Patch from Lennert Buytenhek
      
      Switch the users of ixp2000_reg_write that depend on writes being
      flushed out of the write buffer by the time that function returns
      over to ixp2000_reg_wrb.
      
      When using XCB=101, writes to the same functional unit are still
      guaranteed to complete in order, so we only need to protect against:
      - reordering of writes to different functional units
      - masking an interrupt and then reenabling the IRQ bit in CPSR
      Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      e9b72e43
    • Lennert Buytenhek's avatar
      [ARM] 3063/1: allow slave ixp2000 cpu reset · 69a85761
      Lennert Buytenhek authored
      Patch from Lennert Buytenhek
      
      On the ixdp2x00, the slave CPU is currently not allowed to reset itself
      for fear that it will do something 'funky' on the PCI bus.  This fear is
      ungrounded -- the slave CPU is wired up such that a CPU reset will not
      cause a PCI bus reset to be done.  This patch changes arch_reset() so
      that the slave CPU also executes the reset sequence, allowing it to
      reboot itself using /sbin/reboot.
      Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
      Signed-off-by: default avatarDeepak Saxena <dsaxena@plexity.net>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      69a85761