- 13 Mar, 2023 13 commits
-
-
Ching-Te Ku authored
Correct pointer assignment of v1 null data report. It doesn't really change logic at all, but it looks more readable. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230308053225.24377-6-pkshih@realtek.com
-
Ching-Te Ku authored
The v2 firmware report reduce its maximum register numbers from 30 to 20, it can help to save firmware code size. Signed-off-by:
-
Ching-Te Ku authored
There is a new mechanism which can do some real time performance tuning for WiFi and BT. This TX/RX info is a condition provide to firmware to do traffic analysis. Signed-off-by:
-
Ching-Te Ku authored
Remove WiFi traffic busy level & traffic rate from active role information. This information will move to v5 version TDMA cycle info. Signed-off-by:
-
Ching-Te Ku authored
The error map and counter can help to analyze is coexistence mechanism going well or not. For example, if there is E2G (External control Wi-Fi slot for Wi-Fi 2.4 GHz) hang counter, it means Wi-Fi firmware didn't cut a slot for Wi-Fi 2.4 GHz. Maybe something wrong with firmware timer. Signed-off-by:
-
Jacob Keller authored
Replace the calculations for the payload length in qtnf_cmd_band_fill_iftype with struct_size() and size_sub(). While the payload length does not get directly passed to an allocation function, the performed calculation is still calculating the size of a flexible array structure (minus the size of a header structure). Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Igor Mitsyanko <imitsyanko@quantenna.com> Cc: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by:
-
Jacob Keller authored
The ipw_fw_error structure contains a payload[] flexible array as well as two pointers to this array area, ->elem, and ->log. The total size of the allocated structure is computed without use of the <linux/overflow.h> macros. There's no reason to keep both a payload[] and an extra pointer to both the elem and log members. Convert the elem pointer member into the flexible array member, removing payload. Fix the allocation of the ipw_fw_error structure to use size_add(), struct_size(), and array_size() to compute the allocation. This ensures that any overflow saturates at SIZE_MAX rather than overflowing and potentially allowing an undersized allocation. Before the structure change, the layout of ipw_fw_error was: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_error_elem * elem; /* 24 8 */ struct ipw_event * log; /* 32 8 */ u8 payload[]; /* 40 0 */ /* size: 40, cachelines: 1, members: 8 */ /* last cacheline: 40 bytes */ }; After this change, the layout is now: struct ipw_fw_error { long unsigned int jiffies; /* 0 8 */ u32 status; /* 8 4 */ u32 config; /* 12 4 */ u32 elem_len; /* 16 4 */ u32 log_len; /* 20 4 */ struct ipw_event * log; /* 24 8 */ struct ipw_error_elem elem[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 7 */ /* last cacheline: 32 bytes */ }; This saves a total of 8 bytes for every ipw_fw_error allocation, and removes the risk of a potential overflow on the allocation. Signed-off-by: -
Martin Kaiser authored
We can use the module_usb_driver macro instead of open-coding the driver's init and exit functions. This is simpler and saves some lines of code. Other realtek wireless drivers use module_usb_driver as well. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
-
Ping-Ke Shih authored
Originally, we keep RX standby timer to handle beamformee CSI, but this spends power and causes system not entering power save mode. To improve power consumption, release the timer if throughput becomes low. Signed-off-by:
-
Martin Kaiser authored
The Edimax V2 (vid 0x7392, pid 0xb811) works well with the rtl8xxxu driver since rtl8188eu support has been added. Remove the untested flag for this device. Signed-off-by:
-
Hans de Goede authored
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are all special world-wide compatibility ccode-s. Most of these world-wide ccode-s allow passive scan mode only for 2.4GHz channels 12-14, only enabling them when an AP is seen on them. Since linux-firmware has moved to the new cyfmac4356-pci.bin + cyfmac4356-pci.clm_blob firmware files this no longer works and 4356 devices using e.g. an X2 ccode fail to connect to an AP on channel 13. Add the 4356 chip-id to the list of chips for which to use the ISO3166 country code + rev 0 as fallback in brcmf_translate_country_code() to fix this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the old drivers drivers left in the directory to a new "legacy" directory. I did consider adding CONFIG_WLAN_VENDOR_LEGACY like other vendors have but then dropped the idea as these are really old drivers and hopefully we get to remove them soon. There should be no changes in compilation or in Kconfig options, merely moving files. Signed-off-by:
-
Kalle Valo authored
To clean up drivers/net/wireless move the virtual drivers to a new virtual directory. I did consider adding CONFIG_WLAN_VENDOR_VIRTUAL like other vendors have but then dropped the idea as we are not real drivers. There should be no changes in compilation or in Kconfig options, merely moving files. The order in menuconfig is slightly changed, the virtual drivers are now last in the list. Signed-off-by:
-
- 11 Mar, 2023 22 commits
-
-
Muhammad Usama Anjum authored
make versioncheck reports the following: ./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed. ./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed. So remove linux/version.h from both of these files. Also remove linux/compiler.h while at it as it is also not being used. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Edward Cree authored
EF100 can pop and/or push up to two VLAN tags. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Siddharth Vadapalli says: ==================== Update CPSW bindings for Serdes PHY This series adds documentation for the Serdes PHY. Also, the name used to refer to the Serdes PHY in the am65-cpsw driver is updated to match the documented name. Documenting the Serdes PHY bindings was missed out in the already merged series at: https://lore.kernel.org/r/20230104103432.1126403-1-s-vadapalli@ti.com/ This miss was pointed out at: https://lore.kernel.org/r/CAMuHMdW5atq-FuLEL3htuE3t2uO86anLL3zeY7n1RqqMP_rH1g@mail.gmail.com/ v2: https://lore.kernel.org/r/20230308051835.276552-1-s-vadapalli@ti.com/ v1: https://lore.kernel.org/r/20230306094750.159657-1-s-vadapalli@ti.com/ ==================== Link: https://lore.kernel.org/r/20230309073612.431287-1-s-vadapalli@ti.comSigned-off-by:
-
Siddharth Vadapalli authored
The bindings for the am65-cpsw driver use the name "serdes" to refer to the Serdes PHY. Thus, update the name used for the Serdes PHY within the am65_cpsw_init_serdes_phy() function from "serdes-phy" to "serdes". Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by:
-
Siddharth Vadapalli authored
Update bindings to include Serdes PHY as an optional PHY, in addition to the existing CPSW MAC's PHY. The CPSW MAC's PHY is required while the Serdes PHY is optional. The Serdes PHY handle has to be provided only when the Serdes is being configured in a Single-Link protocol. Using the name "serdes-phy" to represent the Serdes PHY handle, the am65-cpsw-nuss driver can obtain the Serdes PHY and request the Serdes to be configured. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Vadim Fedorenko authored
Flashing firmware via devlink flash was failing on PTP OCP devices because it is using Quad SPI mode, but the driver was not properly behaving. With force_irq flag landed it now can be fixed. Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Link: https://lore.kernel.org/r/20230309105421.2953451-1-vadfed@meta.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== wireless-next patches for 6.4 Major changes: cfg80211 * 6 GHz improvements * HW timestamping support * support for randomized auth/deauth TA for PASN privacy (also for mac80211) mac80211 * radiotap TLV and EHT support for the iwlwifi sniffer * HW timestamping support * per-link debugfs for multi-link brcmfmac * support for Apple (M1 Pro/Max) devices iwlwifi * support for a few new devices * EHT sniffer support rtw88 * better support for some SDIO devices (e.g. MAC address from efuse) rtw89 * HW scan support for 8852b * better support for 6 GHz scanning * tag 'wireless-next-2023-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (84 commits) wifi: iwlwifi: mvm: fix EOF bit reporting wifi: iwlwifi: Do not include radiotap EHT user info if not needed wifi: iwlwifi: mvm: add EHT RU allocation to radiotap wifi: iwlwifi: Update logs for yoyo reset sw changes wifi: iwlwifi: mvm: clean up duplicated defines wifi: iwlwifi: rs-fw: break out for unsupported bandwidth wifi: iwlwifi: Add support for B step of BnJ-Fm4 wifi: iwlwifi: mvm: make flush code a bit clearer wifi: iwlwifi: mvm: avoid UB shift of snif_queue wifi: iwlwifi: mvm: add primary 80 known for EHT radiotap wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer mode wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU width wifi: iwlwifi: mvm: rename define to generic name wifi: iwlwifi: mvm: allow Microsoft to use TAS wifi: iwlwifi: mvm: add all EHT based on data0 info from HW wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flags wifi: iwlwifi: mvm: add an helper function radiotap TLVs wifi: radiotap: separate vendor TLV into header/content wifi: iwlwifi: reduce verbosity of some logging events wifi: iwlwifi: Adding the code to get RF name for MsP device ... ==================== Link: https://lore.kernel.org/r/20230310120159.36518-1-johannes@sipsolutions.netSigned-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== Rework SFP A2 access conditionals This series reworks the SFP A2 (diagnostics and control) access so we don't end up testing a variable number of conditions in several places. This also resolves a minor issue where we may have a module indicating that it is not SFF8472 compliant, doesn't implement A2, but fails to set the enhanced option byte to zero, leading to accesses to the A2 page that fail. The first patch adds a new flag "have_a2" which indicates whether we should be accessing the A2 page, and uses this for hwmon. The conditions are kept the same. The second patch extends the check for soft-state polling and control by using this "have_a2" flag (which effectively augments the check to include some level of SFF8472 compliance.) ==================== Link: https://lore.kernel.org/r/ZAoBnqGBnIZzLwpV@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
The soft state bits are stored in the A2h memory space, and require SFF-8472 compliance. This is what our have_a2 flag tells us, so use this to indicate whether we should attempt to use the soft signals. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King (Oracle) authored
The hwmon code wants to know when it is safe to access the A2h data stored in a separate address. We indicate that this is present when we have SFF-8472 compliance and the lack of an address-change sequence., The same conditions are also true if we want to access other controls and status in the A2h address. So let's make a flag to indicate whether we can access it, instead of repeating the conditions throughout the code. For now, only convert the hwmon code. Signed-off-by:
-
Jakub Kicinski authored
Gal Pressman says: ==================== Couple of minor improvements to build_skb variants First patch replaces open-coded occurrences of skb_propagate_pfmemalloc() in build_skb() and build_skb_around(). The secnod patch adds a likely() to the skb allocation in build_skb(). ==================== Link: https://lore.kernel.org/r/20230308131720.2103611-1-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
Similarly to napi_build_skb(), it is likely the skb allocation in build_skb() succeeded. frag_size != 0 is also likely, as stated in __build_skb_around(). Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
-
Gal Pressman authored
Use skb_propagate_pfmemalloc() in build_skb()/build_skb_around() instead of open-coding it. Reviewed-by:
-
Jens Axboe authored
The tap driver already supports passing in nonblocking state based on O_NONBLOCK, add support for checking IOCB_NOWAIT as well. With that done, we can flag it with FMODE_NOWAIT as well. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/8f859870-e6e2-09ca-9c0f-a2aa7c984fb2@kernel.dkSigned-off-by:
-
Jens Axboe authored
tun already checks for both O_NONBLOCK and IOCB_NOWAIT in its read and write iter handlers, so it's fully ready for FMODE_NOWAIT. But for some reason it doesn't set it. Rectify that oversight. Signed-off-by:
-
Jakub Kicinski authored
Horatiu Vultur says: ==================== net: lan966x: Add support for IS1 VCAP Provide the Ingress Stage 1 (IS1) VCAP (Versatile Content-Aware Processor) support for the Lan966x platform. The IS1 VCAP has 3 lookups and they are accessible with a TC chain id: - chain 1000000: IS1 Lookup 0 - chain 1100000: IS1 Lookup 1 - chain 1200000: IS1 Lookup 2 The IS1 is capable of different actions like rewrite VLAN tags, change priority of the frames, police the traffic, etc. These features will be added at a later point. The IS1 currently implements the action that allows setting the value of a PAG (Policy Association Group) key field in the frame metadata and this can be used for matching in an IS2 VCAP rule. In this way a rule in IS0 VCAP can be linked to rules in the IS2 VCAP. The linking is exposed by using the TC "goto chain" action with an offset from the IS2 chain ids. For example "goto chain 8000001" will use a PAG value of 1 to chain to a rule in IS2 lookup 0. ==================== Link: https://lore.kernel.org/r/20230307220929.834219-1-horatiu.vultur@microchip.comSigned-off-by:
-
Horatiu Vultur authored
IS1 VCAP has it's own list of supported ethernet protocol types which is different than the IS2 VCAP. Therefore separate the list of known protocol types based on the VCAP type. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
Allow rules to be chained between IS1 VCAP and IS2 VCAP. Chaining between IS1 lookups or between IS2 lookups are not supported by the hardware. Signed-off-by:
-
Horatiu Vultur authored
Enable TC command to use IS1 VCAP Signed-off-by:
-
Horatiu Vultur authored
Add IS1 VCAP port keyset configuration for lan966x and also update debug fs support to show the keyset configuration. Signed-off-by:
-
Horatiu Vultur authored
Provide IS1 (ingress stage 1) VCAP model for lan966x. This provides classification actions for lan966x. Signed-off-by:
-
Miquel Raynal authored
NVMEM layouts are no longer registered early, and thus may not yet be available when Ethernet drivers (or any other consumer) probe, leading to possible probe deferrals errors. Forward the error code if this happens. All other errors being discarded, the driver will eventually use a random MAC address if no other source was considered valid (no functional change on this regard). Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20230307192927.512757-1-miquel.raynal@bootlin.comSigned-off-by:
-
- 10 Mar, 2023 5 commits
-
-
Bjorn Helgaas authored
The filename "wangxun" sorts between "intel" and "xscale", but xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the wrong place in the config front-ends. Move wangxun/Kconfig so the Wangxun devices appear in order in the user interface. Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230307221051.890135-1-helgaas@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (igc) This series contains updates to igc driver only. Muhammad adds tracking and reporting of QBV config errors. Tan Tee adds support for configuring max SDU for each Tx queue. Sasha removes check for alternate media as only one media type is supported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Clean up and optimize watchdog task igc: offload queue max SDU from tc-taprio igc: Add qbv_config_change_errors counter ==================== Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jason Xing authored
Keep the accounting schema consistent across different protocols with __sk_mem_schedule(). Besides, it adjusts a little bit on how to calculate forward allocated memory compared to before. After applied this patch, we could avoid receive path scheduling extra amount of memory. Link: https://lore.kernel.org/lkml/20230221110344.82818-1-kerneljasonxing@gmail.com/Signed-off-by:
Jason Xing <kernelxing@tencent.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230308021153.99777-1-kerneljasonxing@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Florian Westphal says: ==================== Netfilter updates for net-next 1. nf_tables 'brouting' support, from Sriram Yagnaraman. 2. Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header, from Xin Long. This comes with a test BIG TCP test case, added to tools/testing/selftests/net/. 3. Fix spelling and indentation in conntrack, from Jeremy Sowden. * 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nat: fix indentation of function arguments netfilter: conntrack: fix typo selftests: add a selftest for big tcp netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim netfilter: move br_nf_check_hbh_len to utils netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len netfilter: bridge: check len before accessing more nh data netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len netfilter: bridge: introduce broute meta statement ==================== Link: https://lore.kernel.org/r/20230308193033.13965-1-fw@strlen.deSigned-off-by:
-
Geert Uytterhoeven authored
Use the new devm_of_phy_optional_get() helper instead of open-coding the same operation. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
