- 22 Jun, 2017 7 commits
-
-
Tahsin Erdogan authored
Quota charging is based on the ownership of the inode. Currently, the xattr inode owner is set to the caller which may be different from the parent inode owner. This is inconsistent with how quota is charged for xattr block and regular data block writes. Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
In data=ordered mode jinode needs to be attached to the xattr inode when writing data to it. Attachment normally occurs during file open for regular files. Since we are not using file interface to write to the xattr inode, the jinode attach needs to be done manually. Otherwise the following crash occurs in data=ordered mode. BUG: unable to handle kernel NULL pointer dereference at (null) IP: jbd2_journal_file_inode+0x37/0x110 PGD 13b3c0067 P4D 13b3c0067 PUD 137660067 PMD 0 Oops: 0000 [#1] SMP CPU: 3 PID: 1877 Comm: python Not tainted 4.12.0-rc1+ #749 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88010e368980 task.stack: ffffc90000374000 RIP: 0010:jbd2_journal_file_inode+0x37/0x110 RSP: 0018:ffffc90000377980 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880123b06230 RCX: 0000000000280000 RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88012c8585d0 RBP: ffffc900003779b0 R08: 0000000000000202 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000400 R12: ffff8801111f81c0 R13: ffff88013b2b6800 R14: ffffc90000377ab0 R15: 0000000000000001 FS: 00007f0c99b77740(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000136d91000 CR4: 00000000000006e0 Call Trace: jbd2_journal_inode_add_write+0xe/0x10 ext4_map_blocks+0x59e/0x620 ext4_xattr_set_entry+0x501/0x7d0 ext4_xattr_block_set+0x1b2/0x9b0 ext4_xattr_set_handle+0x322/0x4f0 ext4_xattr_set+0x144/0x1a0 ext4_xattr_user_set+0x34/0x40 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x69/0x1c0 vfs_setxattr+0xa2/0xb0 setxattr+0x12e/0x150 path_setxattr+0x87/0xb0 SyS_setxattr+0xf/0x20 entry_SYSCALL_64_fastpath+0x18/0xad Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
We don't need acls on xattr inodes because they are not directly accessible from user mode. Besides lockdep complains about recursive locking of xattr_sem as seen below. ============================================= [ INFO: possible recursive locking detected ] 4.11.0-rc8+ #402 Not tainted --------------------------------------------- python/1894 is trying to acquire lock: (&ei->xattr_sem){++++..}, at: [<ffffffff804878a6>] ext4_xattr_get+0x66/0x270 but task is already holding lock: (&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ei->xattr_sem); lock(&ei->xattr_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by python/1894: #0: (sb_writers#10){.+.+.+}, at: [<ffffffff803d829f>] mnt_want_write+0x1f/0x50 #1: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803dda27>] vfs_setxattr+0x57/0xb0 #2: (&ei->xattr_sem){++++..}, at: [<ffffffff80489500>] ext4_xattr_set_handle+0xa0/0x5d0 stack backtrace: CPU: 0 PID: 1894 Comm: python Not tainted 4.11.0-rc8+ #402 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x67/0x99 __lock_acquire+0x5f3/0x1830 lock_acquire+0xb5/0x1d0 down_read+0x2f/0x60 ext4_xattr_get+0x66/0x270 ext4_get_acl+0x43/0x1e0 get_acl+0x72/0xf0 posix_acl_create+0x5e/0x170 ext4_init_acl+0x21/0xc0 __ext4_new_inode+0xffd/0x16b0 ext4_xattr_set_entry+0x5ea/0xb70 ext4_xattr_block_set+0x1b5/0x970 ext4_xattr_set_handle+0x351/0x5d0 ext4_xattr_set+0x124/0x180 ext4_xattr_user_set+0x34/0x40 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x69/0x1c0 vfs_setxattr+0xa2/0xb0 setxattr+0x129/0x160 path_setxattr+0x87/0xb0 SyS_setxattr+0xf/0x20 entry_SYSCALL_64_fastpath+0x18/0xad Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
ext4_orphan_add() requires caller to be holding the inode lock. Add missing lock statements. WARNING: CPU: 3 PID: 1806 at fs/ext4/namei.c:2731 ext4_orphan_add+0x4e/0x240 CPU: 3 PID: 1806 Comm: python Not tainted 4.12.0-rc1+ #746 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880135d466c0 task.stack: ffffc900014b0000 RIP: 0010:ext4_orphan_add+0x4e/0x240 RSP: 0018:ffffc900014b3d50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8801348fe1f0 RCX: ffffc900014b3c64 RDX: 0000000000000000 RSI: ffff8801348fe1f0 RDI: ffff8801348fe1f0 RBP: ffffc900014b3da0 R08: 0000000000000000 R09: ffffffff80e82025 R10: 0000000000004692 R11: 000000000000468d R12: ffff880137598000 R13: ffff880137217000 R14: ffff880134ac58d0 R15: 0000000000000000 FS: 00007fc50f09e740(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000008bc2e0 CR3: 00000001375ac000 CR4: 00000000000006e0 Call Trace: ext4_xattr_inode_orphan_add.constprop.19+0x9d/0xf0 ext4_xattr_delete_inode+0x1c4/0x2f0 ext4_evict_inode+0x15a/0x7f0 evict+0xc0/0x1a0 iput+0x16a/0x270 do_unlinkat+0x172/0x290 SyS_unlink+0x11/0x20 entry_SYSCALL_64_fastpath+0x18/0xad Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
Setting a large xattr value may require writing the attribute contents to an external inode. In this case we may need to lock the xattr inode along with the parent inode. This doesn't pose a deadlock risk because xattr inodes are not directly visible to the user and their access is restricted. Assign a lockdep subclass to xattr inode's lock. ============================================ WARNING: possible recursive locking detected 4.12.0-rc1+ #740 Not tainted -------------------------------------------- python/1822 is trying to acquire lock: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff804912ca>] ext4_xattr_set_entry+0x65a/0x7b0 but task is already holding lock: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803d6687>] vfs_setxattr+0x57/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&sb->s_type->i_mutex_key#15); lock(&sb->s_type->i_mutex_key#15); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by python/1822: #0: (sb_writers#10){.+.+.+}, at: [<ffffffff803d0eef>] mnt_want_write+0x1f/0x50 #1: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffff803d6687>] vfs_setxattr+0x57/0xb0 #2: (jbd2_handle){.+.+..}, at: [<ffffffff80493f40>] start_this_handle+0xf0/0x420 #3: (&ei->xattr_sem){++++..}, at: [<ffffffff804920ba>] ext4_xattr_set_handle+0x9a/0x4f0 stack backtrace: CPU: 0 PID: 1822 Comm: python Not tainted 4.12.0-rc1+ #740 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x67/0x9e __lock_acquire+0x5f3/0x1750 lock_acquire+0xb5/0x1d0 down_write+0x2c/0x60 ext4_xattr_set_entry+0x65a/0x7b0 ext4_xattr_block_set+0x1b2/0x9b0 ext4_xattr_set_handle+0x322/0x4f0 ext4_xattr_set+0x144/0x1a0 ext4_xattr_user_set+0x34/0x40 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x69/0x1c0 vfs_setxattr+0xa2/0xb0 setxattr+0x12e/0x150 path_setxattr+0x87/0xb0 SyS_setxattr+0xf/0x20 entry_SYSCALL_64_fastpath+0x18/0xad Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Andreas Dilger authored
Large xattr support is implemented for EXT4_FEATURE_INCOMPAT_EA_INODE. If the size of an xattr value is larger than will fit in a single external block, then the xattr value will be saved into the body of an external xattr inode. The also helps support a larger number of xattr, since only the headers will be stored in the in-inode space or the single external block. The inode is referenced from the xattr header via "e_value_inum", which was formerly "e_value_block", but that field was never used. The e_value_size still contains the xattr size so that listing xattrs does not need to look up the inode if the data is not accessed. struct ext4_xattr_entry { __u8 e_name_len; /* length of name */ __u8 e_name_index; /* attribute name index */ __le16 e_value_offs; /* offset in disk block of value */ __le32 e_value_inum; /* inode in which value is stored */ __le32 e_value_size; /* size of attribute value */ __le32 e_hash; /* hash value of name and value */ char e_name[0]; /* attribute name */ }; The xattr inode is marked with the EXT4_EA_INODE_FL flag and also holds a back-reference to the owning inode in its i_mtime field, allowing the ext4/e2fsck to verify the correct inode is accessed. [ Applied fix by Dan Carpenter to avoid freeing an ERR_PTR. ] Lustre-Jira: https://jira.hpdd.intel.com/browse/LU-80 Lustre-bugzilla: https://bugzilla.lustre.org/show_bug.cgi?id=4424Signed-off-by:
Kalpak Shah <kalpak.shah@sun.com> Signed-off-by:
James Simmons <uja.ornl@gmail.com> Signed-off-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com>
-
Artem Blagodarenko authored
This INCOMPAT_LARGEDIR feature allows larger directories to be created in ldiskfs, both with directory sizes over 2GB and and a maximum htree depth of 3 instead of the current limit of 2. These features are needed in order to exceed the current limit of approximately 10M entries in a single directory. This patch was originally written by Yang Sheng to support the Lustre server. [ Bumped the credits needed to update an indexed directory -- tytso ] Signed-off-by:
Liang Zhen <liang.zhen@intel.com> Signed-off-by:
Yang Sheng <yang.sheng@intel.com> Signed-off-by:
Artem Blagodarenko <artem.blagodarenko@seagate.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com>
-
- 29 May, 2017 1 commit
-
-
Jan Kara authored
Currently, extent manipulation operations such as hole punch, range zeroing, or extent shifting do not record the fact that file data has changed and thus fdatasync(2) has a work to do. As a result if we crash e.g. after a punch hole and fdatasync, user can still possibly see the punched out data after journal replay. Test generic/392 fails due to these problems. Fix the problem by properly marking that file data has changed in these operations. CC: stable@vger.kernel.org Fixes: a4bb6b64Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- 26 May, 2017 2 commits
-
-
Jan Kara authored
mpage_submit_page() can race with another process growing i_size and writing data via mmap to the written-back page. As mpage_submit_page() samples i_size too early, it may happen that ext4_bio_write_page() zeroes out too large tail of the page and thus corrupts user data. Fix the problem by sampling i_size only after the page has been write-protected in page tables by clear_page_dirty_for_io() call. Reported-by:
Michael Zimmer <michael@swarm64.com> CC: stable@vger.kernel.org Fixes: cb20d518Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
When ext4_map_blocks() is called with EXT4_GET_BLOCKS_ZERO to zero-out allocated blocks and these blocks are actually converted from unwritten extent the following race can happen: CPU0 CPU1 page fault page fault ... ... ext4_map_blocks() ext4_ext_map_blocks() ext4_ext_handle_unwritten_extents() ext4_ext_convert_to_initialized() - zero out converted extent ext4_zeroout_es() - inserts extent as initialized in status tree ext4_map_blocks() ext4_es_lookup_extent() - finds initialized extent write data ext4_issue_zeroout() - zeroes out new extent overwriting data This problem can be reproduced by generic/340 for the fallocated case for the last block in the file. Fix the problem by avoiding zeroing out the area we are mapping with ext4_map_blocks() in ext4_ext_convert_to_initialized(). It is pointless to zero out this area in the first place as the caller asked us to convert the area to initialized because he is just going to write data there before the transaction finishes. To achieve this we delete the special case of zeroing out full extent as that will be handled by the cases below zeroing only the part of the extent that needs it. We also instruct ext4_split_extent() that the middle of extent being split contains data so that ext4_split_extent_at() cannot zero out full extent in case of ENOSPC. CC: stable@vger.kernel.org Fixes: 12735f88Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- 24 May, 2017 5 commits
-
-
Tahsin Erdogan authored
ext4_xattr_block_set() calls dquot_alloc_block() to charge for an xattr block when new references are made. However if dquot_initialize() hasn't been called on an inode, request for charging is effectively ignored because ext4_inode_info->i_dquot is not initialized yet. Add dquot_initialize() to call paths that lead to ext4_xattr_block_set(). Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Eric Biggers authored
Currently we don't allow direct I/O on encrypted regular files, so in such cases we return 0 early in ext4_direct_IO(). There was also an additional BUG_ON() check in ext4_direct_IO_write(), but it can never be hit because of the earlier check for the exact same condition in ext4_direct_IO(). There was also no matching check on the read path, which made the write path specific check seem very ad-hoc. Just remove the unnecessary BUG_ON(). Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
David Gstir <david@sigma-star.at> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Eric Biggers authored
Now that we are passing a struct ext4_filename, we do not need to pass around the original struct qstr too. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Eric Biggers authored
The 'lend' argument of filemap_write_and_wait_range() is inclusive, so we need to subtract 1 from pos + count. Note that 'count' is guaranteed to be nonzero since ext4_file_read_iter() returns early when given a 0 count. Fixes: 16c54688 ("ext4: Allow parallel DIO reads") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Eryu Guan authored
ext4_find_unwritten_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size ext4 on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/ext4/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (42.459 MiB/sec and 43478.2609 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is unconvered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
- 22 May, 2017 8 commits
-
-
Konstantin Khlebnikov authored
ext4_expand_extra_isize() should clear only space between old and new size. Fixes: 6dd4ee7c # v2.6.23 Cc: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Konstantin Khlebnikov authored
I've got another report about breaking ext4 by ENOMEM error returned from ext4_mb_load_buddy() caused by memory shortage in memory cgroup. This time inside ext4_discard_preallocations(). This patch replaces ext4_error() with ext4_warning() where errors returned from ext4_mb_load_buddy() are not fatal and handled by caller: * ext4_mb_discard_group_preallocations() - called before generating ENOSPC, we'll try to discard other group or return ENOSPC into user-space. * ext4_trim_all_free() - just stop trimming and return ENOMEM from ioctl. Some callers cannot handle errors, thus __GFP_NOFAIL is used for them: * ext4_discard_preallocations() * ext4_mb_discard_lg_preallocations() Fixes: adb7ef60 ("ext4: use __GFP_NOFAIL in ext4_free_blocks()") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
There is an off-by-one error in loop termination conditions in ext4_find_unwritten_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Currently, SEEK_HOLE implementation in ext4 may both return that there's a hole at some offset although that offset already has data and skip some holes during a search for the next hole. The first problem is demostrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (2.054 GiB/sec and 538461.5385 ops/sec) Whence Result HOLE 0 Where we can see that SEEK_HOLE wrongly returned offset 0 as containing a hole although we have written data there. The second problem can be demonstrated by: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (1.978 GiB/sec and 518518.5185 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (2 GiB/sec and 500000.0000 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offsets 56k..128k has been ignored by the SEEK_HOLE call. The underlying problem is in the ext4_find_unwritten_pgoff() which is just buggy. In some cases it fails to update returned offset when it finds a hole (when no pages are found or when the first found page has higher index than expected), in some cases conditions for detecting hole are just missing (we fail to detect a situation where indices of returned pages are not contiguous). Fix ext4_find_unwritten_pgoff() to properly detect non-contiguous page indices and also handle all cases where we got less pages then expected in one place and handle it properly there. CC: stable@vger.kernel.org Fixes: c8c0df24 CC: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Tahsin Erdogan authored
When a transaction starts, start_this_handle() saves current PF_MEMALLOC_NOFS value so that it can be restored at journal stop time. Journal restart is a special case that calls start_this_handle() without stopping the transaction. start_this_handle() isn't aware that the original value is already stored so it overwrites it with current value. For instance, a call sequence like below leaves PF_MEMALLOC_NOFS flag set at the end: jbd2_journal_start() jbd2__journal_restart() jbd2_journal_stop() Make jbd2__journal_restart() restore the original value before calling start_this_handle(). Fixes: 81378da6 ("jbd2: mark the transaction context with the scope GFP_NOFS context") Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Jan Kara authored
Quota files have special ranking of i_data_sem lock. We inform lockdep about it when turning on quotas however when turning quotas off, we don't clear the lockdep subclass from i_data_sem lock and thus when the inode gets later reused for a normal file or directory, lockdep gets confused and complains about possible deadlocks. Fix the problem by resetting lockdep subclass of i_data_sem on quota off. Cc: stable@vger.kernel.org Fixes: daf647d2Reported-and-tested-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Linus Torvalds authored
-
Linus Torvalds authored
The code to fetch a 64-bit value from user space was entirely buggered, and has been since the code was merged in early 2016 in commit b2f68038 ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit kernels"). Happily the buggered routine is almost certainly entirely unused, since the normal way to access user space memory is just with the non-inlined "get_user()", and the inlined version didn't even historically exist. The normal "get_user()" case is handled by external hand-written asm in arch/x86/lib/getuser.S that doesn't have either of these issues. There were two independent bugs in __get_user_asm_u64(): - it still did the STAC/CLAC user space access marking, even though that is now done by the wrapper macros, see commit 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses"). This didn't result in a semantic error, it just means that the inlined optimized version was hugely less efficient than the allegedly slower standard version, since the CLAC/STAC overhead is quite high on modern Intel CPU's. - the double register %eax/%edx was marked as an output, but the %eax part of it was touched early in the asm, and could thus clobber other inputs to the asm that gcc didn't expect it to touch. In particular, that meant that the generated code could look like this: mov (%eax),%eax mov 0x4(%eax),%edx where the load of %edx obviously was _supposed_ to be from the 32-bit word that followed the source of %eax, but because %eax was overwritten by the first instruction, the source of %edx was basically random garbage. The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark the 64-bit output as early-clobber to let gcc know that no inputs should alias with the output register. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org # v4.8+ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 21 May, 2017 7 commits
-
-
Linus Torvalds authored
Al noticed that unsafe_put_user() had type problems, and fixed them in commit a7cc722f ("fix unsafe_put_user()"), which made me look more at those functions. It turns out that unsafe_get_user() had a type issue too: it limited the largest size of the type it could handle to "unsigned long". Which is fine with the current users, but doesn't match our existing normal get_user() semantics, which can also handle "u64" even when that does not fit in a long. While at it, also clean up the type cast in unsafe_put_user(). We actually want to just make it an assignment to the expected type of the pointer, because we actually do want warnings from types that don't convert silently. And it makes the code more readable by not having that one very long and complex line. [ This patch might become stable material if we ever end up back-porting any new users of the unsafe uaccess code, but as things stand now this doesn't matter for any current existing uses. ] Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc uaccess fixes from Al Viro: "Fix for unsafe_put_user() (no callers currently in mainline, but anyone starting to use it will step into that) + alpha osf_wait4() infoleak fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: osf_wait4(): fix infoleak fix unsafe_put_user()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: Prevent idle task from ever being preempted. That makes sure that synchronize_rcu_tasks() which is ignoring idle task does not pretend that no task is stuck in preempted state. If that happens and idle was preempted on a ftrace trampoline the machine crashes due to inconsistent state" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Call __schedule() from do_idle() without enabling preemption
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of small fixes for the irq subsystem: - Cure a data ordering problem with chained interrupts - Three small fixlets for the mbigen irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix chained interrupt data ordering irqchip/mbigen: Fix the clear register offset calculation irqchip/mbigen: Fix potential NULL dereferencing irqchip/mbigen: Fix memory mapping code
-
Al Viro authored
failing sys_wait4() won't fill struct rusage... Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
__put_user_size() relies upon its first argument having the same type as what the second one points to; the only other user makes sure of that and unsafe_put_user() should do the same. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix a bug caused by not cleaning up the new instance unique triggers when deleting an instance. It also creates a selftest that triggers that bug. - Fix the delayed optimization happening after kprobes boot up self tests being removed by freeing of init memory. - Comment kprobes on why the delay optimization is not a problem for removal of modules, to keep other developers from searching that riddle. - Fix another case of rcu not watching in stack trace tracing. * tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Make sure RCU is watching before calling a stack trace kprobes: Document how optimized kprobes are removed from module unload selftests/ftrace: Add test to remove instance with active event triggers selftests/ftrace: Fix bashisms ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub ftrace/instances: Clear function triggers when removing instances ftrace: Simplify glob handling in unregister_ftrace_function_probe_func() tracing/kprobes: Enforce kprobes teardown after testing tracing: Move postpone selftests to core from early_initcall
-
- 20 May, 2017 10 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A small collection of fixes that should go into this cycle. - a pull request from Christoph for NVMe, which ended up being manually applied to avoid pulling in newer bits in master. Mostly fibre channel fixes from James, but also a few fixes from Jon and Vijay - a pull request from Konrad, with just a single fix for xen-blkback from Gustavo. - a fuseblk bdi fix from Jan, fixing a regression in this series with the dynamic backing devices. - a blktrace fix from Shaohua, replacing sscanf() with kstrtoull(). - a request leak fix for drbd from Lars, fixing a regression in the last series with the kref changes. This will go to stable as well" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: release the sq ref on rdma read errors nvmet-fc: remove target cpu scheduling flag nvme-fc: stop queues on error detection nvme-fc: require target or discovery role for fc-nvme targets nvme-fc: correct port role bits nvme: unmap CMB and remove sysfs file in reset path blktrace: fix integer parse fuseblk: Fix warning in super_setup_bdi_name() block: xen-blkback: add null check to avoid null pointer dereference drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
-
Vijay Immanuel authored
On rdma read errors, release the sq ref that was taken when the req was initialized. This avoids a hang in nvmet_sq_destroy() when the queue is being freed. Signed-off-by:
Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
James Smart authored
Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
James Smart authored
Per the recommendation by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Rather than waiting for reset work thread to stop queues and abort the ios, immediately stop the queues on error detection. Reset thread will restop the queues (as it's called on other paths), but it does not appear to have a side effect. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
James Smart authored
In order to create an association, the remoteport must be serving either a target role or a discovery role. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
James Smart authored
FC Port roles is a bit mask, not individual values. Correct nvme definitions to unique bits. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jon Derrick authored
CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1 ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Acked-by:
Keith Busch <keith.busch@intel.com> Reviewed-By:
Stephen Bates <sbates@raithlin.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are a number of staging driver fixes for 4.12-rc2 Most of them are typec driver fixes found by reviewers and users of the code. There are also some removals of files no longer needed in the tree due to the ion driver rewrite in 4.12-rc1, as well as some wifi driver fixes. And to round it out, a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'staging-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (22 commits) MAINTAINERS: greybus-dev list is members-only staging: fsl-dpaa2/eth: add ETHERNET dependency staging: typec: fusb302: refactor resume retry mechanism staging: typec: fusb302: reset i2c_busy state in error staging: rtl8723bs: remove re-positioned call to kfree in os_dep/ioctl_cfg80211.c staging: rtl8192e: GetTs Fix invalid TID 7 warning. staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD. staging: rtl8192e: fix 2 byte alignment of register BSSIDR. staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory. staging: vc04_services: Fix bulk cache maintenance staging: ccree: remove extraneous spin_unlock_bh() in error handler staging: typec: Fix sparse warnings about incorrect types staging: typec: fusb302: do not free gpio from managed resource staging: typec: tcpm: Fix Port Power Role field in PS_RDY messages staging: typec: tcpm: Respond to Discover Identity commands staging: typec: tcpm: Set correct flags in PD request messages staging: typec: tcpm: Drop duplicate PD messages staging: typec: fusb302: Fix chip->vbus_present init value staging: typec: fusb302: Fix module autoload staging: typec: tcpci: declare private structure as static ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.12-rc2 Most of them come from Johan, in his valiant quest to fix up all drivers that could be affected by "malicious" USB devices. There's also some fixes for more "obscure" drivers to handle some of the vmalloc stack fallout (which for USB drivers, was always the case, but very few people actually ran those systems...) Other than that, the normal set of xhci and gadget and musb driver fixes as well. All have been in linux-next with no reported issues" * tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits) usb: musb: tusb6010_omap: Do not reset the other direction's packet size usb: musb: Fix trying to suspend while active for OTG configurations usb: host: xhci-plat: propagate return value of platform_get_irq() xhci: Fix command ring stop regression in 4.11 xhci: remove GFP_DMA flag from allocation USB: xhci: fix lock-inversion problem usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd usb: host: xhci-mem: allocate zeroed Scratchpad Buffer xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton usb: xhci: trace URB before giving it back instead of after USB: serial: qcserial: add more Lenovo EM74xx device IDs USB: host: xhci: use max-port define USB: hub: fix SS max number of ports USB: hub: fix non-SS hub-descriptor handling USB: hub: fix SS hub-descriptor handling USB: usbip: fix nonconforming hub descriptor USB: gadget: dummy_hcd: fix hub-descriptor removable fields doc-rst: fixed kernel-doc directives in usb/typec.rst USB: core: of: document reference taken by companion helper USB: ehci-platform: fix companion-device leak ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are five small bugfixes for reported issues with 4.12-rc1 and earlier kernels. Nothing huge here, just a lp, mem, vpd, and uio driver fix, along with a Kconfig fixup for one of the misc drivers. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: Google VPD: Fix memory allocation error handling drivers: char: mem: Check for address space wraparound with mmap() uio: fix incorrect memory leak cleanup misc: pci_endpoint_test: select CRC32 char: lp: fix possible integer overflow in lp_setup()
-