- 04 Jul, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ... -
Linus Torvalds authored
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
-
- 03 Jul, 2013 38 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ... -
Andrew Morton authored
The x bit can easily get lost (patch(1) loses it, for example). Reported-by:
Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Ramkumar Ramachandra authored
Signed-off-by:
-
Joern Engel authored
As the confusing naming indicates, this test has some overlap with pre-existing tests. Would be nice to merge them eventually. But since it is only test code, cleanliness is much less important than mere existence. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
-
Joern Engel authored
thuge-gen was forgotten. Fix it by removing the duplication, so we don't get too many repeats. Signed-off-by:
-
Joern Engel authored
In case this ever gets scripted, it should return 0 on success and 1 on failure. Parsing the output should be left to meatbags. Signed-off-by:
-
Kevin Hao authored
This line was introduced by fcb11918 ("resources: add arch hook for preventing allocation in reserved areas"). But the struct tmp was already assigned to *new in the above line, so this seems superfluous. Just remove it. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Tang Chen authored
ctx->ctx_lock should be ctx->completion_lock. Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Jean-Francois Dagenais authored
Power-up timing The DS2408 is sensitive to the power-on slew rate and can inadvertently power up with a test mode feature enabled. When this occurs, the P0 port does not respond to the Channel Access Write command. For most reliable operation, it is recommended to disable the test mode after every power-on reset using the Disable Test Mode sequence shown below. The 64-bit ROM code must be transmitted in the same bit sequence as with the Match ROM command, i.e., least significant bit first. This precaution is recommended in parasite power mode (VCC pin connected to GND) as well as with VCC power. Disable Test Mode: RST,PD,96h,<64-bit DS2408 ROM Code>,3Ch,RST,PD [akpm@linux-foundation.org: don't use kerenldoc token to introduce a non-kerneldoc comment, tweak whitespace] Signed-off-by:
Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Libo Chen authored
Signed-off-by:
Libo Chen <libo.chen@huawei.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
-
Libo Chen authored
Use module_pci_driver instead of init/exit, make code clean. Signed-off-by:
-
Jan Luebbe authored
Instead of allocating a struct pps_gpio_platform_data in the DT case, store the necessary information in struct pps_gpio_device_data itself. This avoids an additional allocation and the ifdef. It also gets rid of some indirection. Also use dev_err instead of pr_err in the changed code. Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Jan Luebbe authored
This removes some boilerplate code (no functional changes). Signed-off-by:
-
Jan Luebbe authored
Signed-off-by:
-
Alexandru Gheorghiu authored
Replaced calls to kmalloc and memset with kzalloc. Patch found using coccinelle. Signed-off-by:
Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by:
-
Kees Cook authored
Avoid strncpy anti-pattern. [akpm@linux-foundation.org: remove the str[cpy|dup] altogether] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Rob Landley <rob@landley.net> Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
Some users have a large AoE target while others like to use many AoE targets at the same time. In the latter case, there is an opportunity to greatly improve aggregate throughput by allowing different threads to complete the I/O associated with each target. For 36 targets, 4 KiB read throughput roughly doubles, for example, with these changes in place. Signed-off-by:
-
Paul Clements authored
Currently, when a disconnect is requested by the user (via NBD_DISCONNECT ioctl) the return from NBD_DO_IT is undefined (it is usually one of several error codes). This means that nbd-client does not know if a manual disconnect was performed or whether a network error occurred. Because of this, nbd-client's persist mode (which tries to reconnect after error, but not after manual disconnect) does not always work correctly. This change fixes this by causing NBD_DO_IT to always return 0 if a user requests a disconnect. This means that nbd-client can correctly either persist the connection (if an error occurred) or disconnect (if the user requested it). Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Acked-by:
Rob Landley <rob@landley.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michal Belczyk authored
The NBD_CLEAR_QUE ioctl has been deprecated for quite some time (its job is now done by two other ioctls). We should stop trying to make bogus assertions in it. Also, user-level code should remove calls to NBD_CLEAR_QUE, ASAP. Signed-off-by:
Michal Belczyk <belczyk@bsd.krakow.pl> Signed-off-by:
-
Raphael S. Carvalho authored
Move statement to static initilization of init_pid_ns. Signed-off-by:
Raphael S. Carvalho <raphael.scarv@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Alexandre Bounine authored
Change endpoint device name format to use a component tag value instead of device destination ID. RapidIO specification defines a component tag to be a unique identifier for devices in a network. RapidIO switches already use component tag as part of their device name and also use it for device identification when processing error management event notifications. Forming an endpoint's device name using its component tag instead of destination ID allows to keep sysfs device directories unchanged in case if a routing process dynamically changes endpoint's destination ID as a result of route optimization. This change should not affect any existing users because a valid device destination ID always should be obtained by reading "destid" attribute and not by parsing device name. This patch also removes switchid member from struct rio_switch because it simply duplicates the component tag and does not have other use than in device name generation. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Signed-off-by:
-
Alexandre Bounine authored
Update RapidIO documentation files to reflect modularization changes. Signed-off-by:
-
Alexandre Bounine authored
Add RapidIO-specific modalias generation to enable udev notifications about RapidIO-specific events. The RapidIO modalias string format is shown below: "rapidio:vNNNNdNNNNavNNNNadNNNN" Where: v - Device Vendor ID (16 bit), d - Device ID (16 bit), av - Assembly Vendor ID (16 bit), ad - Assembly ID (16 bit), as they are reported in corresponding Capability Registers (CARs) of each RapidIO device. Signed-off-by:
-
Alexandre Bounine authored
Add a configuration option to build RapidIO subsystem core code as a loadable kernel module. Currently this option is available only for x86-based platforms, with the additional patch for PowerPC planned to be provided later. This patch replaces kernel command line parameter "riohdid=" with its module-specific analog "rapidio.hdid=". Signed-off-by:
-
Alexandre Bounine authored
This patch adds an option to build device driver for Tsi721 PCIe-to-SRIO bridge device as a kernel module. Currently this module cannot be unloaded because the existing RapidIO subsystem code does not support dynamic removal of local RapidIO controllers (TODO). Signed-off-by:
-
Alexandre Bounine authored
Update enumeration/discovery method registration mechanism to allow loading enumeration/discovery methods before all mports are registered. Existing statically linked RapidIO subsystem expects that all available RapidIO mport devices are initialized and registered before the enumeration/discovery method is registered. Switching to loadable mport device drivers creates situation when mport device driver can be loaded after enumeration/discovery method is attached (e.g., loadable mport driver in a system with statically linked RapidIO core and enumerator). This also will happen in a system with hot-pluggable RapidIO controllers. To remove the dependency on the initialization/registration order this patch introduces enumeration/discovery registration mechanism that supports arbitrary registration order of mports and enumerator/discovery methods. The following registration rules are implemented: - only one enumeration/discovery method can be registered for given mport ID (including RIO_MPORT_ANY); - when new enumeration/discovery methods tries to attach to the registered mport device, method with matching mport ID will replace a default method previously registered for given mport (if any); - enumeration/discovery method with target ID=RIO_MPORT_ANY will be attached only to mports that do not have another enumerator attached to them; - when new mport device is registered with RapidIO subsystem, registration routine searches for the enumeration/discovery method with the best matching mport ID; Signed-off-by:
-
Alexandre Bounine authored
Rework probe/remove routines to prevent rionet driver from monopolizing target RapidIO devices. Fix conflict with modular RapidIO switch drivers. Using one of RapidIO messaging channels rionet driver provides a service layer common to all endpoint devices in a system's RapidIO network. These devices may also require their own specific device driver which will be blocked from attaching to the target device by rionet (or block rionet if loaded earlier). To avoid conflict with device-specific drivers, the rionet driver is reworked to be registered as a subsystem interface on the RapidIO bus. The reworked rio_remove_dev() and rionet_exit() routines also include handling of individual rionet peer device removal which was not supported before. Signed-off-by:
-
Alexandre Bounine authored
Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by:
-
Wu Fengguang authored
sparse warnings: drivers/rapidio/rio-scan.c:1143:5: sparse: symbol 'rio_enum_mport' was not declared. Should it be static? drivers/rapidio/rio-scan.c:1246:5: sparse: symbol 'rio_disc_mport' was not declared. Should it be static? Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: "Bounine, Alexandre" <Alexandre.Bounine@idt.com> Signed-off-by:
-
Alexandre Bounine authored
Remove the driver for Tsi500 Parallel RapidIO switch because this device has not been available for several years. Since the first introduction of Tsi500, the parallel RapidIO interface was replaced by the serial RapidIO (sRIO) and therefore there is no value in keeping this driver. Signed-off-by:
-
Jean Delvare authored
We print a dump stack after idr_remove warning. This is useful to find the faulty piece of code. Let's do the same for ida_remove, as it would be equally useful there. [akpm@linux-foundation.org: convert the open-coded printk+dump_stack into WARN()] Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhang Yanfei authored
The only user of saved_max_pfn in s390 is read_oldmem interface but we have removed that interface, so saved_max_pfn is now unneeded in s390, and we needn't set it anymore. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Zhang Yanfei authored
The only user of saved_max_pfn in ia64 is read_oldmem interface but we have removed that interface, so saved_max_pfn is now unneeded in ia64, and we needn't set it anymore. Signed-off-by:
-
Zhang Yanfei authored
saved_max_pfn is used to know the amount of memory that the previous kernel used. And for powerpc, we set saved_max_pfn by passing the kernel commandline parameter "savemaxmem=". The only user of saved_max_pfn in powerpc is read_oldmem interface. Since we have removed read_oldmem, we don't need this parameter anymore. Signed-off-by:
-
