* pci/host-xilinx:
  PCI: xilinx-nwl: Remove mask for messages not supported by AXI
  PCI: xilinx: Configure PCIe MPS settings

* pci/host-xgene:
  PCI: xgene: Configure PCIe MPS settings
  PCI: xgene: Fix double free on init error

* pci/host-versatile:
  PCI: versatile: Configure PCIe MPS settings

* pci/host-thunder:
  PCI: thunder-pem: Add support for cn81xx and cn83xx SoCs

* pci/host-rockchip:
  PCI: rockchip: Set vendor ID from local core config space
  PCI: rockchip: Fix rockchip_pcie_probe() error path to free resource list
  PCI: rockchip: Mark PM functions as __maybe_unused
  PCI: rockchip: Use readl_poll_timeout() instead of open-coding it
  PCI: rockchip: Disable RC's ASPM L0s based on DT "aspm-no-l0s"
  PCI: rockchip: Add system PM support

* pci/host-rcar:
  PCI: rcar: Use of_device_get_match_data() to simplify probe
  PCI: rcar: Add compatible string for r8a7796
  PCI: rcar: Return -ENODEV from host bridge probe when no card present

* pci/host-mvebu:
  PCI: mvebu: Change delay after reset to the PCIe spec mandated 100ms
  PCI: mvebu: Handle changes to the bridge windows while enabled

* pci/host-layerscape:
  PCI: layerscape: Use of_device_get_match_data() to simplify probe

Conflicts:
	drivers/pci/dwc/pci-layerscape.c

* pci/host-iproc:
  PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS
  PCI: iproc: Configure PCIe MPS settings
  PCI: iproc: Use of_device_get_match_data() to simplify probe

* pci/host-imx6:
  PCI: imx6: Fix a typo in error message
  PCI: imx6: Remove LTSSM disable workaround
  PCI: imx6: Remove redundant "Link never came up" message

Conflicts:
	drivers/pci/dwc/pci-imx6.c

* pci/host-hv:
  PCI: hv: Use device serial number as PCI domain
  PCI: hv: Fix wslot_to_devfn() to fix warnings on device removal

* pci/host-hisi:
  PCI: generic: Call pci_fixup_irqs() only on ARM
  PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports
  PCI: hisi: Rename config space accessors to remove "acpi"
  PCI: hisi: Add DT almost-ECAM support for Hip06/Hip07 host controllers
  PCI: hisi: Use of_device_get_match_data() to simplify probe

Conflicts:
	drivers/pci/dwc/pcie-hisi.c

* pci/host-exynos:
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  PCI: exynos: Refactor to make it easier to support other SoCs
  PCI: exynos: Remove duplicated code
  PCI: exynos: Use the bitops BIT() macro to build bitmasks
  PCI: exynos: Remove unnecessary local variables
  PCI: exynos: Replace the *_blk/*_phy/*_elb accessors
  PCI: exynos: Rename all pointer names from "exynos_pcie" to "ep"

Conflicts:
	drivers/pci/dwc/pci-exynos.c

* pci/host-altera:
  PCI: altera: Extract TLP completion status correctly

* pci/host-designware:
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: designware: Check for iATU unroll only on platforms that use ATU

CONFIG_PCI is used to enable host mode PCI. In preparation for adding
endpoint mode support to designware driver, remove the dependency of
designware on CONFIG_PCI and make only the host-specific part depend on
CONFIG_PCI.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Now that PCI designware host has a separate file, add a new PCIE_DW_HOST
config symbol to select the host-only driver. This will enable to
independently select host support and endpoint support (when it's added).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Split pcie-designware.c into pcie-designware-host.c that contains the host
specific parts of the driver and pcie-designware.c that contains the parts
used by both host driver and endpoint driver.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

No functional change. Fix all checkpatch warnings and check errors in
pcie-designware.c
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>

The "num-lanes" DT property is parsed in dw_pcie_host_init(). However
num-lanes is applicable to both root complex mode and endpoint mode. As a
first step, move the parsing of this property outside dw_pcie_host_init().
This is in preparation for splitting pcie-designware.c to pcie-designware.c
and pcie-designware-host.c
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Keep only the host-specific members in struct pcie_port and move the common
members (i.e common to both host and endpoint) to struct dw_pcie.  This is
in preparation for adding endpoint mode support to designware driver.

While at that also fix checkpatch warnings.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

No functional change. Get device pointer at the beginning of
dw_pcie_host_init() instead of getting it all over dw_pcie_host_init().
This is in preparation for splitting struct pcie_port into host and core
structures (once split pcie_port will not have device pointer).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

No functional change. dw_pcie_cfg_read()/dw_pcie_cfg_write() doesn't do
anything specific to access configuration space. It can be just renamed to
dw_pcie_read()/dw_pcie_write() and used to read/write data to dbi space.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Joao Pinto <jpinto@synopsys.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

Add platform_set_drvdata() in all designware-based drivers to store the
private data structure of the driver so that dev_set_drvdata() can be used
to get back private data structure in add_pcie_port/host_init.  This is in
preparation for splitting struct pcie_port into core and host only
structures. After the split pcie_port will not be part of the driver's
private data structure and *container_of* used now to get the private data
pointer cannot be used.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

No functional change. Move the register defines and other macros from
pcie-designware.c to pcie-designware.h. This is in preparation to split the
pcie-designware.c file into designware core file and host-specific file.

While at that also fix a checkpatch warning.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Joao Pinto <jpinto@synopsys.com>

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR to avoid the
following warnings found by scripts/coccinelle/api/ptr_ret.cocci:

  drivers/pci/dwc/pcie-qcom.c:215:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  drivers/pci/dwc/pcie-qcom.c:247:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  drivers/pci/dwc/pcie-qcom.c:481:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>

No functional change.  PHY APIs like phy_init()/phy_power_on() are invoked
from multiple places.  Group all the PHY APIs in dra7xx_pcie_enable_phy()
and dra7xx_pcie_disable_phy() and use these functions for enabling or
disabling the PHY.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci-dra7xx driver had a bug in that if CONFIG_PCI_MSI config is enabled, it
doesn't support legacy interrupt.  Fix it here so that both MSI and legacy
interrupts can be enabled simultaneously and the interrupt mechanism
supported by the endpoint device will be used.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

PCIe in AM57x/DRA7x devices is by default configured to work in GEN2 mode.
However there may be situations when working in GEN1 mode is desired.  One
example is limitation i925 (PCIe GEN2 mode not supported at junction
temperatures < 0C).

Add support to force Root Complex to work in GEN1 mode if so desired, but
don't force GEN1 mode on any board just yet.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

No functional change.  Use the new devm_gpiod_get_optional() to simplify
the probe code.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Group all the PCI drivers that use DesignWare core in dwc directory.
dwc IP is capable of operating in both host mode and device mode and
keeping it inside the *host* directory is misleading.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>

* for-linus:
  PCI: designware: Check for iATU unroll only on platforms that use ATU

Switch the pci-exynos driver to generic PHY framework.  At the same time
backward compatibility is preserved: Warning will be printed for old DTB.

Refer to the binding file:
- Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

According to using PHY framework, updates the exynos5440-pcie binding.  For
maintaining backward compatibility, leaves the current dt-binding.  (It
should be deprecated.)

Recommends to use the PHY Framework and "config" property to follow the
designware-pcie binding.  If you use the old way, can see "missing *config*
reg space" message.  Because the getting configuration space address from
range is old way.

NOTE: When use the "config" property, first name of 'reg-names' must be set
to "elbi".  Otherwise driver can't maintain the backward capability.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>

Add support for Generic PHY framework about Exynos SoCs.  Current Exynos
PCIe driver doesn't use the PHY framework, which makes it difficult to
upstream the other Exynos variants because of different PHY registers.

Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe
driver.

[bhelgaas: depend on "OF && (ARCH_EXYNOS || COMPILE_TEST)", update
copyright year, both per Vivek]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add the exynos-pcie-phy binding for Exynos PCIe PHY.  This is for using
generic PHY framework.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

Previously we extracted 'Completion Status' from b14:12, but it is actually
b15:13.  Extract it from the correct bits.

Signed-off-by: Hu Yadi<yadi.hu@windriver.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>

The TRM says the vendor ID in the RC's configure space can be rewritten
and the value must be the same as the value read from the local core
configure space.  But we misread that and didn't notice it before.  Actually
we should only able to rewrite it from the local core configure space.

Fix that issue to make lspci show the correct IP vendor infomation.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use the device serial number as the PCI domain.  The serial numbers start
with 1 and are unique within a VM.  So names, such as VF NIC names, that
include domain number as part of the name, can be shorter than that based
on part of bus UUID previously.  The new names will also stay same for VMs
created with copied VHD and same number of devices.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>

* pci/vpd:
  PCI: Increase VPD access timeout to 125ms