[WHY]
Screen was seen corrupted for a few ms
when switching both ways. There was also
not enough bandwidth for HDR to be
enabled in HG disabled mode.
This was due to FEC being
enabled although DSC was not supported
or disabled for the EDP.

[HOW]
Check for EDP DSC support in DC caps
or if DSC should be disabled for EDP
before enabling FEC for EDP.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Nicholas Choi <Nicholas.Choi@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Iswara Nagulendran <inagulen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The only use of the global variables in r600_blit_shaders.c
were in the old drivers/gpu/drm/radeon/r600_blit.c
This file was removed in
commit 8333f607 ("drm/radeon: remove UMS support")

So remove the r600_blit_shaders.[c|h] files
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
The dGPU cannot enter PSR when it is not connected to a panel.

[HOW]
Added a check to dc_link_set_psr_allow_active
which returns early if panel is disconnected.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Nicholas Choi <Nicholas.Choi@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Max Erenberg <merenber@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Z10 is should not be enabled by default on DCN31.

[HOW]
Using DC debug flags to disable Z10 by default on DCN31.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Saaem Rizvi <syerizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
When booting, the driver waits for the MPC idle bit to be set as part of
pipe initialization. However, on some systems this occurs before OTG is
enabled, and since the MPC idle bit won't be set until the vupdate
signal occurs (which requires OTG to be enabled), this never happens and
the wait times out. This can add hundreds of milliseconds to the boot
time.

[How]
Do not wait for mpc idle if tg is disabled
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Z10 and S0i3 have some shared path. Previous code clean up ,
incorrectly removed these pointers, which breaks s0i3 restore

[How]
Do not clear the function pointers based on Z10 disable.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In order to debug ras error, driver will print IPID/SYND/MISC0
register value if detect correctable or uncorrectable error.
Provide umc_query_error_status_helper function to reduce code
redundancy.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use div_u64() rather than a a 64 bit divide.

Fixes: 3fe5739d ("drm/amd/display: Add flip interval workaround")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Angus Wang <Angus.Wang@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>

Instead of the 'amdgpu_ring_priority_level' type,
the 'amdgpu_gfx_pipe_priority' type was used,
which is an error when setting ring priority.
This is a minor error, but may cause problems in the future.

Instead of AMDGPU_RING_PRIO_2 = 2, we can use AMDGPU_RING_PRIO_MAX = 3,
but AMDGPU_RING_PRIO_2 = 2 is used for compatibility with
AMDGPU_GFX_PIPE_PRIO_HIGH = 2, and not change the behavior of the
code.
Signed-off-by: Grigory Vasilyev <h0tc0d3@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

cayman_default_state and cayman_default_size are only
used in ni.c.  Single file symbols should be static.
So move their definitions to cayman_blit_shaders.h
and change their storage-class-specifier to static.

Remove unneeded cayman_blit_shader.c

cayman_ps/vs definitions were removed with
commit 4f862967 ("drm/radeon/kms: remove r6xx+ blit copy routines")
So their declarations in cayman_blit_shader.h
are not needed, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The data revision was not changed to 5 from 4 when the CG flags
were extended to 64-bits.  Since this was missed I took
the opportunity to add future upper 64-bits of PG flags
as well so we don't need to bump it again when that comes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add CONFIG_X86 check to fix the build error.

Fixes: 49aa98ca ("drm/amd/amdgpu: Only reserve vram for firmware with vega9 MS_HYPERV host.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Application could change XNACK enabled to disabled while KFD is draining
stale retry fault, therefore the check for whether to drain retry faults
must be before the check for whether xnack_enabled, to avoid report
incorrect vm fault after application changes XNACK mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use flexible array member in ip discovery struct as recommended[1].

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays

v2: squash in struct_size fixes
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With this, we can support more CG flags.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

driver loading failed on VEGA10 SRIOV VF with linux host due to a wide
range of stolen reserved vram.
Since VEGA10 SRIOV VF need to reserve vram for firmware with windows
Hyper_V host specifically, check hypervisor type to only reserve
memory for it, and the range of the reserved vram can be limited
to between 5M-7M area.

Fixes: faad5cca ("drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.")
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check that adev->gfx.ras is valid before using it.

Fixes: 6475ae2b ("drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)")
CC: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Smatch reports this issue
hdcp1_execution.c:500:29: warning: function
  'mod_hdcp_hdcp1_dp_execution' with external linkage
  has definition

The storage-class-specifier extern is not needed in a
definition, so remove it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enabling gfxoff quirk results in perfectly usable graphical user
interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB.

Without the quirk, X server is completely unusable as every few seconds
there is gpu reset due to ring gfx timeout.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DP/HDMI audio on AMD PRO VII stops working after S3:
[  149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset
[  149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset
[  149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset
[  149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot
[  150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot
...
[  155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535

The offending commit is daf8de08 ("drm/amdgpu: always reset the asic in
suspend (v2)"). Commit 34452ac3 ("drm/amdgpu: don't use BACO for
reset in S3 ") doesn't help, so the issue is something different.

Assuming that to make HDA resume to D0 fully realized, it needs to be
successfully put to D3 first. And this guesswork proves working, by
moving amdgpu_asic_reset() to noirq callback, so it's called after HDA
function is in D3.

Fixes: daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop the trailing vcn.

Fixes: afc2f276 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2")
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as
documented in supported_modes of drm_plane_create_blend_mode_property():
https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c

In this mode, both 'pixel alpha' and 'plane alpha' participate in the
calculation, as described by the pixel blend mode formula in KMS/DRM
documentation:

out.rgb = plane_alpha * fg.rgb +
          (1 - (plane_alpha * fg.alpha)) * bg.rgb

Considering the blend config mechanisms we have in the driver so far,
the alpha mode that better fits this blend mode is the
_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain
is the plane alpha (global_alpha).

With this change, alpha property stops to be ignored. It also addresses
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734

v2:
 * keep the 8-bit value for global_alpha_value (Nicholas)
 * correct the logical ordering for combined global gain (Nicholas)
 * apply to dcn10 too (Nicholas)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use rcu_read_lock to read p->event_idr concurrently with other readers
and writers. Use p->event_mutex only for creating and destroying events
and in kfd_wait_on_events.

Protect the contents of the kfd_event structure with a per-event
spinlock that can be taken inside the rcu_read_lock critical section.

This eliminates contention of p->event_mutex in set_event, which tends
to be on the critical path for dispatch latency even when busy waiting
is used. It also eliminates lock contention in event interrupt handlers.
Since the p->event_mutex is now used much less, the impact of requiring
it in kfd_wait_on_events should also be much smaller.

This should improve event handling latency for processes using multiple
GPUs concurrently.

v2: Reschedule the worker periodically to avoid soft lockup warnings
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Sean Keely <Sean.Keely@amd.com> # v1
Tested-by: Sanjay Tripathi <sanjay.tripathi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'dm_services.h' included in 'freesync,c' is duplicated, so remove one.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SMU takes clock limits in Mhz units.  socclk and fclk were
using 10 khz units in some cases.  Switch to Mhz units.
Fixes higher than required SoC clocks.

Fixes: 97cf3299 ("drm/amd/pm: Removed fixed clock in auto mode DPM")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Make dcn315 base its clock table off dcfclk rather than fclk.

This change also adds some sanity checking to make sure an
empty pmfw table does not result in invalid dal clocks.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Variable igp_lane_info always is 0. 0 & any value = 0 and false.
In this way, all сonditional statements will false.

The code was leftover from when the code was ported from radeon
where igp_lane_info was derived from the vbios on supported
platforms.

[update commit message - Alex]
Signed-off-by: Grigory Vasilyev <h0tc0d3@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Smatch reports these issues
si_blit_shaders.c:31:11: warning: symbol 'si_default_state'
  was not declared. Should it be static?
si_blit_shaders.c:253:11: warning: symbol 'si_default_size'
  was not declared. Should it be static?

Both symbols are only used in si.c.  Single file symbols
should be static.  So move the definition of
si_default_state and si_default_size to si_blit_shader.h
and change their storage-class-specifier to static.

Remove unneeded si_blit_shader.c
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes crash on MST Hub disconnect.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Replace `if (!ret)` with `else` for simplification.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

bo_adev is NULL for system memory mapping to GPU.

Fixes: 30671b44 ("drm/amdgpu: fix TLB flushing during eviction")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Add options to allow for configurable PHY options during PSR active
state
- Remove unused versioning and git hash
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
Function to calculate scaling ratios can be called with invalid plane
src/dest, causing a divide by zero.

[HOW]
Fail building scaling params if plane state src/dest rects are
unpopulated
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
The dp_trace structure is self contained component designed for
all dp trace, and the edp link trace should be a part of it;
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- [FW Promotion] Release 0.0.111.0
- Check for invalid input params when building scaling params
- Move link_trace for edp to dp_trace
- Fix missing-prototypes warning
- Enable 3 plane for DCN 3.0 and 3.02
- Extract set stream attribute into link_hwss
- Revert Power down hardware if timer not trigger
- Add support for handling 128b/132b link training test request
- Add configuration options for AUX wake work around
- Remove underflow IRQ type
- Add flip interval workaround for low FPS in some game
- Remove assert for odm transition case
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
No declaration of hubp1_wait_pipe_read_start found in header file.

[How]
Add its declaration.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Becle Lee <becle.lee@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY&HOW]
Increase num of bottom planes to 2. Note that DCN 3.03 is left out
since it has max 2 planes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Extract set stream attribute into link_hwss as part of the link hwss
refactor work.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
DP2.x added new enum values for UHBR link rates in link training test
request for test automation. We need to add UHBR link rates test request
support in preparation for compliance test automation.

[how]
added a function that translate test link rate to dc link rate.  Call
the translation function to decide the requested test link rate.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>