- 03 Aug, 2016 38 commits
-
-
Darrick J. Wong authored
Provide a mechanism for higher levels to create RUI/RUD items, submit them to the log, and a stub function to deal with recovered RUI items. These parts will be connected to the rmapbt in a later patch. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Darrick J. Wong authored
Create rmap update intent/done log items to record redo information in the log. Because we need to roll transactions between updating the bmbt mapping and updating the reverse mapping, we also have to track the status of the metadata updates that will be recorded in the post-roll transactions, just in case we crash before committing the final transaction. This mechanism enables log recovery to finish what was already started. Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
Add a couple of helper functions to encapsulate rmap btree insert and delete operations. Add tracepoints to the update function. Signed-off-by:
-
Darrick J. Wong authored
Provide a function to convert an unwritten rmap extent to a real one and vice versa. [ dchinner: Note that this algorithm and code was derived from the existing bmapbt unwritten extent conversion code in xfs_bmap_add_extent_unwritten_real(). ] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Now that we have records in the rmap btree, we need to remove them when extents are freed. This needs to find the relevant record in the btree and remove/trim/split it accordingly. [darrick.wong@oracle.com: make rmap routines handle the enlarged keyspace] [dchinner: remove remaining unused debug printks] [darrick: fix a bug when growfs in an AG with an rmap ending at EOFS] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Now all the btree, free space and transaction infrastructure is in place, we can finally add the code to insert reverse mappings to the rmap btree. Freeing will be done in a separate patch, so just the addition operation can be focussed on here. [darrick: handle owner offsets when adding rmaps] [dchinner: remove remaining debug printk statements] [darrick: move unwritten bit to rm_offset] Signed-off-by:
-
Darrick J. Wong authored
Signed-off-by:
-
Darrick J. Wong authored
Now that the generic btree code supports querying all records within a range of keys, use that functionality to allow us to ask for all the extents mapped to a range of physical blocks. Signed-off-by:
-
Darrick J. Wong authored
Now that the generic btree code supports overlapping intervals, plug in the rmap btree to this functionality. We will need it to find potential left neighbors in xfs_rmap_{alloc,free} later in the patch set. Signed-off-by: -
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Implement the generic btree operations needed to manipulate rmap btree blocks. This is very similar to the per-ag freespace btree implementation, and uses the AGFL for allocation and freeing of blocks. Adapt the rmap btree to store owner offsets within each rmap record, and to handle the primary key being redefined as the tuple [agblk, owner, offset]. The expansion of the primary key is crucial to allowing multiple owners per extent. [darrick: adapt the btree ops to deal with offsets] [darrick: remove init_rec_from_key] [darrick: move unwritten bit to rm_offset] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> The rmap btree is allocated from the AGFL, which means we have to ensure ENOSPC is reported to userspace before we run out of free space in each AG. The last allocation in an AG can cause a full height rmap btree split, and that means we have to reserve at least this many blocks *in each AG* to be placed on the AGFL at ENOSPC. Update the various space calculation functions to handle this. Also, because the macros are now executing conditional code and are called quite frequently, convert them to functions that initialise variables in the struct xfs_mount, use the new variables everywhere and document the calculations better. [darrick.wong@oracle.com: don't reserve blocks if !rmap] [dchinner@redhat.com: update m_ag_max_usable after growfs] Signed-off-by:
-
Darrick J. Wong authored
The rmap btrees will use the AGFL as the block allocation source, so we need to ensure that the transaction reservations reflect the fact this tree is modified by allocation and freeing. Hence we need to extend all the extent allocation/free reservations used in transactions to handle this. Note that this also gets rid of the unused XFS_ALLOCFREE_LOG_RES macro, as we now do buffer reservations based on the number of buffers logged via xfs_calc_buf_res(). Hence we only need the buffer count calculation now. [darrick: use rmap_maxlevels when calculating log block resv] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Now we can read and write rmap btree blocks, we can add support to the growfs code to initialise new rmap btree blocks. [darrick.wong@oracle.com: fill out the rmap offset fields] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Add the stubs into the extent allocation and freeing paths that the rmap btree implementation will hook into. While doing this, add the trace points that will be used to track rmap btree extent manipulations. [darrick.wong@oracle.com: Extend the stubs to take full owner info.] Signed-off-by:
-
Darrick J. Wong authored
For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> XFS reserves a small amount of space in each AG for the minimum number of free blocks needed for operation. Adding the rmap btree increases the number of reserved blocks, but it also increases the complexity of the calculation as the free inode btree is optional (like the rmbt). Rather than calculate the prealloc blocks every time we need to check it, add a function to calculate it at mount time and store it in the struct xfs_mount, and convert the XFS_PREALLOC_BLOCKS macro just to use the xfs-mount variable directly. Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> The rmap btree will require the same stats as all the other generic btrees, so add all the code for that now. Signed-off-by:
-
Darrick J. Wong authored
Originally-From: Dave Chinner <dchinner@redhat.com> Add new per-ag rmap btree definitions to the per-ag structures. The rmap btree will sit in the empty slots on disk after the free space btrees, and hence form a part of the array of space management btrees. This requires the definition of the btree to be contiguous with the free space btrees. Signed-off-by:
-
Darrick J. Wong authored
By my calculations, a 1,073,741,824 block AG with a 1k block size can attain a maximum height of 9. Assuming a record size of 24 bytes, a key/ptr size of 44 bytes, and half-full btree nodes, we'd need 53,687,092 blocks for the records and ~6 million blocks for the keys. That requires a btree of height 9 based on the following derivation: Block size = 1024b sblock CRC header = 56b == 1024-56 = 968 bytes for tree data rmapbt record = 24b == 40 records per leaf block rmapbt ptr/key = 44b == 22 ptr/keys per block Worst case, each block is half full, so 20 records and 11 ptrs per block. 1073741824 rmap records / 20 records per block == 53687092 leaf blocks 53687092 leaves / 11 ptrs per block == 4880645 level 1 blocks == 443695 level 2 blocks == 40336 level 3 blocks == 3667 level 4 blocks == 334 level 5 blocks == 31 level 6 blocks == 3 level 7 blocks == 1 level 8 block Signed-off-by:
-
Darrick J. Wong authored
Add a couple of tracepoints for the deferred extent free operation and a site for injecting errors while finishing the operation. This makes it easier to debug deferred ops and test log redo. Signed-off-by:
-
Darrick J. Wong authored
Refactor the EFI intent item recovery (and cancellation) functions into a general function that scans the AIL and an intent item type specific handler. Move the function that recovers a single EFI item into the extent free item code. We'll want the generalized function when we start wiring up more redo item types. Furthermore, ensure that log recovery only replays the redo items that were in the AIL prior to recovery by checking the item LSN against the largest LSN seen during log scanning. As written this should never happen, but we can be defensive anyway. Signed-off-by:
-
Darrick J. Wong authored
Mechanical change of flist/free_list to dfops, since they're now deferred ops, not just a freeing list. Signed-off-by:
-
Darrick J. Wong authored
Drop the compatibility shims that we were using to integrate the new deferred operation mechanism into the existing code. No new code. Signed-off-by:
-
Darrick J. Wong authored
Restructure everything that used xfs_bmap_free to use xfs_defer_ops instead. For now we'll just remove the old symbols and play some cpp magic to make it work; in the next patch we'll actually rename everything. Signed-off-by:
-
Darrick J. Wong authored
Connect the xfs_defer mechanism with the pieces that we'll need to handle deferred extent freeing. We'll wire up the existing code to our new deferred mechanism later. Signed-off-by:
-
Darrick J. Wong authored
Replace structure typedefs with struct xfs_foo_* in the EFI/EFD handling code in preparation to move it over to deferred ops. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Darrick J. Wong authored
Add tracepoints for the internals of the deferred ops mechanism and tracepoint classes for clients of the dops, to make debugging easier. Signed-off-by:
-
Darrick J. Wong authored
All the code around struct xfs_bmap_free basically implements a deferred operation framework through which we can roll transactions (to unlock buffers and avoid violating lock order rules) while managing all the necessary log redo items. Previously we only used this code to free extents after some sort of mapping operation, but with the advent of rmap and reflink, we suddenly need to do more than that. With that in mind, xfs_bmap_free really becomes a deferred ops control structure. Rename the structure and move the deferred ops into their own file to avoid further bloating of the bmap code. Signed-off-by:
-
Darrick J. Wong authored
Refactor the btree_change_owner function into a more generic apparatus which visits all blocks in a btree. We'll use this in a subsequent patch for counting btree blocks for AG reservations. Signed-off-by:
-
Darrick J. Wong authored
Create a function to enable querying of btree records mapping to a range of keys. This will be used in subsequent patches to allow querying the reverse mapping btree to find the extents mapped to a range of physical blocks, though the generic code can be used for any range query. The overlapped query range function needs to use the btree get_block helper because the root block could be an inode, in which case bc_bufs[nlevels-1] will be NULL. Signed-off-by:
-
Darrick J. Wong authored
On a filesystem with both reflink and reverse mapping enabled, it's possible to have multiple rmap records referring to the same blocks on disk. When overlapping intervals are possible, querying a classic btree to find all records intersecting a given interval is inefficient because we cannot use the left side of the search interval to filter out non-matching records the same way that we can use the existing btree key to filter out records coming after the right side of the search interval. This will become important once we want to use the rmap btree to rebuild BMBTs, or implement the (future) fsmap ioctl. (For the non-overlapping case, we can perform such queries trivially by starting at the left side of the interval and walking the tree until we pass the right side.) Therefore, extend the btree code to come closer to supporting intervals as a first-class record attribute. This involves widening the btree node's key space to store both the lowest key reachable via the node pointer (as the btree does now) and the highest key reachable via the same pointer and teaching the btree modifying functions to keep the highest-key records up to date. This behavior can be turned on via a new btree ops flag so that btrees that cannot store overlapping intervals don't pay the overhead costs in terms of extra code and disk format changes. When we're deleting a record in a btree that supports overlapped interval records and the deletion results in two btree blocks being joined, we defer updating the high/low keys until after all possible joining (at higher levels in the tree) have finished. At this point, the btree pointers at all levels have been updated to remove the empty blocks and we can update the low and high keys. When we're doing this, we must be careful to update the keys of all node pointers up to the root instead of stopping at the first set of keys that don't need updating. This is because it's possible for a single deletion to cause joining of multiple levels of tree, and so we need to update everything going back to the root. The diff_two_keys functions return < 0, 0, or > 0 if key1 is less than, equal to, or greater than key2, respectively. This is consistent with the rest of the kernel and the C library. In btree_updkeys(), we need to evaluate the force_all parameter before running the key diff to avoid reading uninitialized memory when we're forcing a key update. This happens when we've allocated an empty slot at level N + 1 to point to a new block at level N and we're in the process of filling out the new keys. Signed-off-by:
-
Darrick J. Wong authored
Add some function pointers to bc_ops to get the btree keys for leaf and node blocks, and to update parent keys of a block. Convert the _btree_updkey calls to use our new pointer, and modify the tree shape changing code to call the appropriate get_*_keys pointer instead of _btree_copy_keys because the overlapping btree has to calculate high key values. Signed-off-by:
-
Darrick J. Wong authored
When a btree block has to be split, we pass the new block's ptr from xfs_btree_split() back to xfs_btree_insert() via a pointer parameter; however, we pass the block's key through the cursor's record. It is a little weird to "initialize" a record from a key since the non-key attributes will have garbage values. When we go to add support for interval queries, we have to be able to pass the lowest and highest keys accessible via a pointer. There's no clean way to pass this back through the cursor's record field. Therefore, pass the key directly back to xfs_btree_insert() the same way that we pass the btree_ptr. As a bonus, we no longer need init_rec_from_key and can drop it from the codebase. Signed-off-by:
-
Darrick J. Wong authored
If we make the inode root block of a btree unfull by expanding the root, we must set *stat to 1 to signal success, rather than leaving it uninitialized. Signed-off-by:
-
Darrick J. Wong authored
When we're deleting realtime extents, we need to lock the summary inode in case we need to update the summary info to prevent an assert on the rsumip inode lock on a debug kernel. While we're at it, fix the locking annotations so that we avoid triggering lockdep warnings. Signed-off-by:
-
Darrick J. Wong authored
Apparently cris doesn't require structure stride to align with the largest type in the struct, so list[0] isn't at offset 4 like it is everywhere else. Fix this... insofar as existing XFSes on cris are screwed. Signed-off-by:
-
Darrick J. Wong authored
When we're iterating inode xattrs by handle, we have to copy the cursor back to userspace so that a subsequent invocation actually retrieves subsequent contents. Signed-off-by:
-
- 22 Jul, 2016 2 commits
-
-
Dave Chinner authored
-
Dave Chinner authored
Been around for long enough now, hasn't caused any regression test failures in the past 3 months, so it's time to make it a fully supported feature. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
