- 22 May, 2019 29 commits
-
-
Eric Biggers authored
commit 6a1faa4a upstream. CCM instances can be created by either the "ccm" template, which only allows choosing the block cipher, e.g. "ccm(aes)"; or by "ccm_base", which allows choosing the ctr and cbcmac implementations, e.g. "ccm_base(ctr(aes-generic),cbcmac(aes-generic))". However, a "ccm_base" instance prevents a "ccm" instance from being registered using the same implementations. Nor will the instance be found by lookups of "ccm". This can be used as a denial of service. Moreover, "ccm_base" instances are never tested by the crypto self-tests, even if there are compatible "ccm" tests. The root cause of these problems is that instances of the two templates use different cra_names. Therefore, fix these problems by making "ccm_base" instances set the same cra_name as "ccm" instances, e.g. "ccm(aes)" instead of "ccm_base(ctr(aes-generic),cbcmac(aes-generic))". This requires extracting the block cipher name from the name of the ctr and cbcmac algorithms. It also requires starting to verify that the algorithms are really ctr and cbcmac using the same block cipher, not something else entirely. But it would be bizarre if anyone were actually using non-ccm-compatible algorithms with ccm_base, so this shouldn't break anyone in practice. Fixes: 4a49b499 ("[CRYPTO] ccm: Added CCM mode") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 5e27f38f upstream. If the rfc7539 template is instantiated with specific implementations, e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than "rfc7539(chacha20,poly1305)", then the implementation names end up included in the instance's cra_name. This is incorrect because it then prevents all users from allocating "rfc7539(chacha20,poly1305)", if the highest priority implementations of chacha20 and poly1305 were selected. Also, the self-tests aren't run on an instance allocated in this way. Fix it by setting the instance's cra_name from the underlying algorithms' actual cra_names, rather than from the requested names. This matches what other templates do. Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Martin Willi <martin@strongswan.org> Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Eric Biggers authored
commit 7aceaaef upstream. The arm64 implementations of ChaCha and XChaCha are failing the extra crypto self-tests following my patches to test the !may_use_simd() code paths, which previously were untested. The problem is as follows: When !may_use_simd(), the arm64 NEON implementations fall back to the generic implementation, which uses the skcipher_walk API to iterate through the src/dst scatterlists. Due to how the skcipher_walk API works, walk.stride is set from the skcipher_alg actually being used, which in this case is the arm64 NEON algorithm. Thus walk.stride is 5*CHACHA_BLOCK_SIZE, not CHACHA_BLOCK_SIZE. This unnecessarily large stride shouldn't cause an actual problem. However, the generic implementation computes round_down(nbytes, walk.stride). round_down() assumes the round amount is a power of 2, which 5*CHACHA_BLOCK_SIZE is not, so it gives the wrong result. This causes the following case in skcipher_walk_done() to be hit, causing a WARN() and failing the encryption operation: if (WARN_ON(err)) { /* unexpected case; didn't process all bytes */ err = -EINVAL; goto finish; } Fix it by rounding down to CHACHA_BLOCK_SIZE instead of walk.stride. (Or we could replace round_down() with rounddown(), but that would add a slow division operation every time, which I think we should avoid.) Fixes: 2fe55987 ("crypto: arm64/chacha - use combined SIMD/ALU routine for more speed") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Eric Biggers authored
commit aec286cd upstream. If the user-provided IV needs to be aligned to the algorithm's alignmask, then skcipher_walk_virt() copies the IV into a new aligned buffer walk.iv. But skcipher_walk_virt() can fail afterwards, and then if the caller unconditionally accesses walk.iv, it's a use-after-free. Fix this in the LRW template by checking the return value of skcipher_walk_virt(). This bug was detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. When the extra self-tests were run on a KASAN-enabled kernel, a KASAN use-after-free splat occured during lrw(aes) testing. Fixes: c778f96b ("crypto: lrw - Optimize tweak computation") Cc: <stable@vger.kernel.org> # v4.20+ Cc: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit edaf28e9 upstream. If the user-provided IV needs to be aligned to the algorithm's alignmask, then skcipher_walk_virt() copies the IV into a new aligned buffer walk.iv. But skcipher_walk_virt() can fail afterwards, and then if the caller unconditionally accesses walk.iv, it's a use-after-free. salsa20-generic doesn't set an alignmask, so currently it isn't affected by this despite unconditionally accessing walk.iv. However this is more subtle than desired, and it was actually broken prior to the alignmask being removed by commit b62b3db7 ("crypto: salsa20-generic - cleanup and convert to skcipher API"). Since salsa20-generic does not update the IV and does not need any IV alignment, update it to use req->iv instead of walk.iv. Fixes: 2407d608 ("[CRYPTO] salsa20: Salsa20 stream cipher") Cc: stable@vger.kernel.org Signed-off-by:
-
Christian Lamparter authored
commit 7e92e171 upstream. Currently, crypto4xx CFB and OFB AES ciphers are failing testmgr's test vectors. |cfb-aes-ppc4xx encryption overran dst buffer on test vector 3, cfg="in-place" |ofb-aes-ppc4xx encryption overran dst buffer on test vector 1, cfg="in-place" This is because of a very subtile "bug" in the hardware that gets indirectly mentioned in 18.1.3.5 Encryption/Decryption of the hardware spec: the OFB and CFB modes for AES are listed there as operation modes for >>> "Block ciphers" <<<. Which kind of makes sense, but we would like them to be considered as stream ciphers just like the CTR mode. To workaround this issue and stop the hardware from causing "overran dst buffer" on crypttexts that are not a multiple of 16 (AES_BLOCK_SIZE), we force the driver to use the scatter buffers as the go-between. As a bonus this patch also kills redundant pd_uinfo->num_gd and pd_uinfo->num_sd setters since the value has already been set before. Cc: stable@vger.kernel.org Fixes: f2a13e7c ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
commit 25baaf8e upstream. Commit 8efd972e ("crypto: testmgr - support checking skcipher output IV") caused the crypto4xx driver to produce the following error: | ctr-aes-ppc4xx encryption test failed (wrong output IV) | on test vector 0, cfg="in-place" This patch fixes this by reworking the crypto4xx_setkey_aes() function to: - not save the iv for ECB (as per 18.2.38 CRYP0_SA_CMD_0: "This bit mut be cleared for DES ECB mode or AES ECB mode, when no IV is used.") - instruct the hardware to save the generated IV for all other modes of operations that have IV and then supply it back to the callee in pretty much the same way as we do it for cbc-aes already. - make it clear that the DIR_(IN|OUT)BOUND is the important bit that tells the hardware to encrypt or decrypt the data. (this is cosmetic - but it hopefully prevents me from getting confused again). - don't load any bogus hash when we don't use any hash operation to begin with. Cc: stable@vger.kernel.org Fixes: f2a13e7c ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by:
-
Yazen Ghannam authored
commit 71a84402 upstream. AMD family 17h Models 10h-2Fh may report a high number of L1 BTB MCA errors under certain conditions. The errors are benign and can safely be ignored. However, the high error rate may cause the MCA threshold counter to overflow causing a high rate of thresholding interrupts. In addition, users may see the errors reported through the AMD MCE decoder module, even with the interrupt disabled, due to MCA polling. Clear the "Counter Present" bit in the Instruction Fetch bank's MCA_MISC0 register. This will prevent enabling MCA thresholding on this bank which will prevent the high interrupt rate due to this error. Define an AMD-specific function to filter these errors from the MCE event pool so that they don't get reported during early boot. Rename filter function in EDAC/mce_amd to avoid a naming conflict, while at it. [ bp: Move function prototype to the internal header and massage/cleanup, fix typos. ] Reported-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "clemej@gmail.com" <clemej@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Shirish S <Shirish.S@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Cc: <stable@vger.kernel.org> # 5.0.x: c95b323d: x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models Cc: <stable@vger.kernel.org> # 5.0.x: 30aa3d26: x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk Cc: <stable@vger.kernel.org> # 5.0.x: 9308fd40: x86/MCE: Group AMD function prototypes in <asm/mce.h> Cc: <stable@vger.kernel.org> # 5.0.x Link: https://lkml.kernel.org/r/20190325163410.171021-2-Yazen.Ghannam@amd.comSigned-off-by:
-
Yazen Ghannam authored
commit 45d4b7b9 upstream. Some systems may report spurious MCA errors. In general, spurious MCA errors may be disabled by clearing a particular bit in MCA_CTL. However, clearing a bit in MCA_CTL may not be recommended for some errors, so the only option is to ignore them. An MCA error is printed and handled after it has been added to the MCE event pool. So an MCA error can be ignored by not adding it to that pool in the first place. Add such a filtering function. [ bp: Move function prototype to the internal header and massage. ] Signed-off-by:
-
Peter Zijlstra authored
commit 6690e86b upstream. Effectively reverts commit: 2c7577a7 ("sched/x86_64: Don't save flags on context switch") Specifically because SMAP uses FLAGS.AC which invalidates the claim that the kernel has clean flags. In particular; while preemption from interrupt return is fine (the IRET frame on the exception stack contains FLAGS) it breaks any code that does synchonous scheduling, including preempt_enable(). This has become a significant issue ever since commit: 5b24a7a2 ("Add 'unsafe' user access functions for batched accesses") provided for means of having 'normal' C code between STAC / CLAC, exposing the FLAGS.AC state. So far this hasn't led to trouble, however fix it before it comes apart. Reported-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org Fixes: 5b24a7a2 ("Add 'unsafe' user access functions for batched accesses") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jean-Philippe Brucker authored
commit 827a108e upstream. When the CPU comes out of suspend, the firmware may have modified the OS Double Lock Register. Save it in an unused slot of cpu_suspend_ctx, and restore it on resume. Cc: <stable@vger.kernel.org> Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Jean-Philippe Brucker authored
commit 6fda41bf upstream. Some firmwares may reboot CPUs with OS Double Lock set. Make sure that it is unlocked, in order to use debug exceptions. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vincenzo Frascino authored
commit d2631193 upstream. Currently, compat tasks running on arm64 can allocate memory up to TASK_SIZE_32 (UL(0x100000000)). This means that mmap() allocations, if we treat them as returning an array, are not compliant with the sections 6.5.8 of the C standard (C99) which states that: "If the expression P points to an element of an array object and the expression Q points to the last element of the same array object, the pointer expression Q+1 compares greater than P". Redefine TASK_SIZE_32 to address the issue. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> [will: fixed typo in comment] Signed-off-by:
-
Will Deacon authored
commit 75a19a02 upstream. When executing clock_gettime(), either in the vDSO or via a system call, we need to ensure that the read of the counter register occurs within the seqlock reader critical section. This ensures that updates to the clocksource parameters (e.g. the multiplier) are consistent with the counter value and therefore avoids the situation where time appears to go backwards across multiple reads. Extend the vDSO logic so that the seqlock critical section covers the read of the counter register as well as accesses to the data page. Since reads of the counter system registers are not ordered by memory barrier instructions, introduce dependency ordering from the counter read to a subsequent memory access so that the seqlock memory barriers apply to the counter access in both the vDSO and the system call paths. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Boyang Zhou authored
commit f08cae2f upstream. The file offset argument to the arm64 sys_mmap() implementation is scaled from bytes to pages by shifting right by PAGE_SHIFT. Unfortunately, the offset is passed in as a signed 'off_t' type and therefore large offsets (i.e. with the top bit set) are incorrectly sign-extended by the shift. This has been observed to cause false mmap() failures when mapping GPU doorbells on an arm64 server part. Change the type of the file offset argument to sys_mmap() from 'off_t' to 'unsigned long' so that the shifting scales the value as expected. Cc: <stable@vger.kernel.org> Signed-off-by:
Boyang Zhou <zhouby_cn@126.com> [will: rewrote commit message] Signed-off-by:
-
Hans de Goede authored
commit 9274c783 upstream. The ACEPC T8 and T11 Cherry Trail Z8350 mini PCs use an AXP288 and as PCs, rather then portables, they does not have a battery. Still for some reason the AXP288 not only thinks there is a battery, it actually thinks it is discharging while the PC is running, slowly going to 0% full, causing userspace to shutdown the system due to the battery being critically low after a while. This commit adds the ACEPC T8 and T11 to the axp288 fuel-gauge driver blacklist, so that we stop reporting bogus battery readings on this device. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1690852 Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit c3422ad5 upstream. Currently there is no check on platform_get_irq() return value in case it fails, hence never actually reporting any errors and causing unexpected behavior when using such value as argument for function regmap_irq_get_virq(). Fix this by adding a proper check, a message reporting any errors and returning *pirq* Addresses-Coverity-ID: 1443940 ("Improper use of negative value") Fixes: 843735b7 ("power: axp288_charger: axp288 charger driver") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Wen Yang authored
commit 629266bf upstream. The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with warnings like: arch/arm/mach-exynos/firmware.c:201:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 193, but without a corresponding object release within this function. Cc: stable@vger.kernel.org Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Christoph Muellner authored
commit 7bda9482 upstream. Direct commands (DCMDs) are an optional feature of eMMC 5.1's command queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI, which exposes a control register bit to enable the feature. The current implementation sets this bit unconditionally. This patch allows to suppress the feature activation, by specifying the property disable-cqe-dcmd. Signed-off-by:
Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by:
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: 84362d79 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Sylwester Nawrocki authored
commit 9b23e1a3 upstream. The name of CODEC input widget to which microphone is connected through the "Headphone" jack is "IN12" not "IN1". This fixes microphone support on Odroid XU3. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
commit 34dc8225 upstream. Add missing audio routing entry for the capture stream, this change is required to fix audio recording on Odroid XU3/XU3-Lite. Fixes: 885b005d ("ARM: dts: exynos: Add support for secondary DAI to Odroid XU3") Cc: stable@vger.kernel.org Signed-off-by:
-
Stuart Menefy authored
commit b7ed69d6 upstream. Fix the interrupt information for the GPIO lines with a shared EINT interrupt. Fixes: 16d7ff26 ("ARM: dts: add dts files for exynos5260 SoC") Cc: stable@vger.kernel.org Signed-off-by:
Stuart Menefy <stuart.menefy@mathembedded.com> Signed-off-by:
-
Christian Lamparter authored
commit f3e35357 upstream. David Bauer reported that the VDSL modem (attached via PCIe) on his AVM Fritz!Box 7530 was complaining about not having enough space in the BAR. A closer inspection of the old qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed: | qcom,pcie@80000 { | compatible = "qcom,msm_pcie"; | reg = <0x80000 0x2000>, | <0x99000 0x800>, | <0x40000000 0xf1d>, | <0x40000f20 0xa8>, | <0x40100000 0x1000>, | <0x40200000 0x100000>, | <0x40300000 0xd00000>; | reg-names = "parf", "phy", "dm_core", "elbi", | "conf", "io", "bars"; Matching the reg-names with the listed reg leads to <0xd00000> as the size for the "bars". Cc: stable@vger.kernel.org BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.htmlReported-by:
David Bauer <mail@david-bauer.net> Signed-off-by:
Andy Gross <agross@kernel.org> Signed-off-by:
-
Christoph Muellner authored
commit a3eec13b upstream. When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Katsuhiro Suzuki authored
commit 798689e4 upstream. This patch fixes IO domain voltage setting that is related to audio_gpio3d4a_ms (bit 1) of GRF_IO_VSEL. This is because RockPro64 schematics P.16 says that regulator supplies 3.0V power to APIO5_VDD. So audio_gpio3d4a_ms bit should be clear (means 3.0V). Power domain map is saying different thing (supplies 1.8V) but I believe P.16 is actual connectings. Fixes: e4f3fb49 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Cc: stable@vger.kernel.org Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by:
-
Josh Poimboeuf authored
commit e6f393bc upstream. When a function falls through to the next function due to a compiler bug, objtool prints some obscure warnings. For example: drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x95: return with modified stack frame drivers/regulator/core.o: warning: objtool: regulator_count_voltages()+0x0: stack state mismatch: cfa1=7+32 cfa2=7+8 Instead it should be printing: drivers/regulator/core.o: warning: objtool: regulator_supply_is_couple() falls through to next function regulator_count_voltages() This used to work, but was broken by the following commit: 13810435 ("objtool: Support GCC 8's cold subfunctions") The padding nops at the end of a function aren't actually part of the function, as defined by the symbol table. So the 'func' variable in validate_branch() is getting cleared to NULL when a padding nop is encountered, breaking the fallthrough detection. If the current instruction doesn't have a function associated with it, just consider it to be part of the previously detected function by not overwriting the previous value of 'func'. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/546d143820cd08a46624ae8440d093dd6c902cae.1557766718.git.jpoimboe@redhat.comSigned-off-by:
-
Andy Lutomirski authored
commit 9d8d0294 upstream. On x86_64, all returns to usermode go through prepare_exit_to_usermode(), with the sole exception of do_nmi(). This even includes machine checks -- this was added several years ago to support MCE recovery. Update the documentation. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jon Masters <jcm@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 04dcbdb8 ("x86/speculation/mds: Clear CPU buffers on exit to user") Link: http://lkml.kernel.org/r/999fa9e126ba6a48e9d214d2f18dbde5c62ac55c.1557865329.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit 88640e1d upstream. The double fault ESPFIX path doesn't return to user mode at all -- it returns back to the kernel by simulating a #GP fault. prepare_exit_to_usermode() will run on the way out of general_protection before running user code. Signed-off-by:
-
Waiman Long authored
[ Upstream commit a9e9bcb4 ] During my rwsem testing, it was found that after a down_read(), the reader count may occasionally become 0 or even negative. Consequently, a writer may steal the lock at that time and execute with the reader in parallel thus breaking the mutual exclusion guarantee of the write lock. In other words, both readers and writer can become rwsem owners simultaneously. The current reader wakeup code does it in one pass to clear waiter->task and put them into wake_q before fully incrementing the reader count. Once waiter->task is cleared, the corresponding reader may see it, finish the critical section and do unlock to decrement the count before the count is incremented. This is not a problem if there is only one reader to wake up as the count has been pre-incremented by 1. It is a problem if there are more than one readers to be woken up and writer can steal the lock. The wakeup was actually done in 2 passes before the following v4.9 commit: 70800c3c ("locking/rwsem: Scan the wait_list for readers only once") To fix this problem, the wakeup is now done in two passes again. In the first pass, we collect the readers and count them. The reader count is then fully incremented. In the second pass, the waiter->task is then cleared and they are put into wake_q to be woken up later. Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: huang ying <huang.ying.caritas@gmail.com> Fixes: 70800c3c ("locking/rwsem: Scan the wait_list for readers only once") Link: http://lkml.kernel.org/r/20190428212557.13482-2-longman@redhat.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
- 16 May, 2019 11 commits
-
-
Greg Kroah-Hartman authored
-
Damien Le Moal authored
commit 0916878d upstream. For a single device mount using a zoned block device, the zone information for the device is stored in the sbi->devs single entry array and sbi->s_ndevs is set to 1. This differs from a single device mount using a regular block device which does not allocate sbi->devs and sets sbi->s_ndevs to 0. However, sbi->s_devs == 0 condition is used throughout the code to differentiate a single device mount from a multi-device mount where sbi->s_ndevs is always larger than 1. This results in problems with single zoned block device volumes as these are treated as multi-device mounts but do not have the start_blk and end_blk information set. One of the problem observed is skipping of zone discard issuing resulting in write commands being issued to full zones or unaligned to a zone write pointer. Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single regular block device mount) and sbi->s_ndevs == 1 (single zoned block device mount) in the same manner. This is done by introducing the helper function f2fs_is_multi_device() and using this helper in place of direct tests of sbi->s_ndevs value, improving code readability. Fixes: 7bb3a371 ("f2fs: Fix zoned block device support") Cc: <stable@vger.kernel.org> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit 340d4556 upstream. When we hot-remove a device, usually the host sends us a PCI_EJECT message, and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. When we execute the quick hot-add/hot-remove test, the host may not send us the PCI_EJECT message if the guest has not fully finished the initialization by sending the PCI_RESOURCES_ASSIGNED* message to the host, so it's potentially unsafe to only depend on the pci_destroy_slot() in hv_eject_device_work() because the code path create_root_hv_pci_bus() -> hv_pci_assign_slots() is not called in this case. Note: in this case, the host still sends the guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. In the quick hot-add/hot-remove test, we can have such a race before the code path pci_devices_present_work() -> new_pcichild_device() adds the new device into the hbus->children list, we may have already received the PCI_EJECT message, and since the tasklet handler hv_pci_onchannelcallback() may fail to find the "hpdev" by calling get_pcichild_wslot(hbus, dev_message->wslot.slot) hv_pci_eject_device() is not called; Later, by continuing execution create_root_hv_pci_bus() -> hv_pci_assign_slots() creates the slot and the PCI_BUS_RELATIONS message with bus_rel->device_count == 0 removes the device from hbus->children, and we end up being unable to remove the slot in hv_pci_remove() -> hv_pci_remove_slots() Remove the slot in pci_devices_present_work() when the device is removed to address this race. pci_devices_present_work() and hv_eject_device_work() run in the singled-threaded hbus->wq, so there is not a double-remove issue for the slot. We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback() to the workqueue, because we need the hv_pci_onchannelcallback() synchronously call hv_pci_eject_device() to poll the channel ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue fixed in commit de0aa7b2 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information") Signed-off-by:
Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: rewritten commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dexuan Cui authored
commit 15becc2b upstream. When we unload the pci-hyperv host controller driver, the host does not send us a PCI_EJECT message. In this case we also need to make sure the sysfs PCI slot directory is removed, otherwise a command on a slot file eg: "cat /sys/bus/pci/slots/2/address" will trigger a "BUG: unable to handle kernel paging request" and, if we unload/reload the driver several times we would end up with stale slot entries in PCI slot directories in /sys/bus/pci/slots/ root@localhost:~# ls -rtl /sys/bus/pci/slots/ total 0 drwxr-xr-x 2 root root 0 Feb 7 10:49 2 drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1 drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2 Add the missing code to remove the PCI slot and fix the current behaviour. Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by:
-
Dexuan Cui authored
commit 05f151a7 upstream. When a device is created in new_pcichild_device(), hpdev->refs is set to 2 (i.e. the initial value of 1 plus the get_pcichild()). When we hot remove the device from the host, in a Linux VM we first call hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and then schedules a work of hv_eject_device_work(), so hpdev->refs becomes 3 (let's ignore the paired get/put_pcichild() in other places). But in hv_eject_device_work(), currently we only call put_pcichild() twice, meaning the 'hpdev' struct can't be freed in put_pcichild(). Add one put_pcichild() to fix the memory leak. The device can also be removed when we run "rmmod pci-hyperv". On this path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()), hpdev->refs is 2, and we do correctly call put_pcichild() twice in pci_devices_present_work(). Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by:
-
YueHaibing authored
commit df0bfe75 upstream. 'desc' should be freed before leaving from err handing path. Fixes: 1ce9e605 ("virtio_ring: introduce packed ring support") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> stable@vger.kernel.org Signed-off-by:
-
Laurentiu Tudor authored
commit 5266e58d upstream. Set RI in the default kernel's MSR so that the architected way of detecting unrecoverable machine check interrupts has a chance to work. This is inline with the MSR setup of the rest of booke powerpc architectures configured here. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Russell Currey authored
commit a3f3072d upstream. Without restoring the IAMR after idle, execution prevention on POWER9 with Radix MMU is overwritten and the kernel can freely execute userspace without faulting. This is necessary when returning from any stop state that modifies user state, as well as hypervisor state. To test how this fails without this patch, load the lkdtm driver and do the following: $ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT which won't fault, then boot the kernel with powersave=off, where it will fault. Applying this patch will fix this. Fixes: 3b10d009 ("powerpc/mm/radix: Prevent kernel execution of user space") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Rick Lindsley authored
commit f3935626 upstream. When the memset code was added to pgd_alloc(), it failed to consider that kmem_cache_alloc() can return NULL. It's uncommon, but not impossible under heavy memory contention. Example oops: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000000a4000 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries CPU: 70 PID: 48471 Comm: entrypoint.sh Kdump: loaded Not tainted 4.14.0-115.6.1.el7a.ppc64le #1 task: c000000334a00000 task.stack: c000000331c00000 NIP: c0000000000a4000 LR: c00000000012f43c CTR: 0000000000000020 REGS: c000000331c039c0 TRAP: 0300 Not tainted (4.14.0-115.6.1.el7a.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44022840 XER: 20040000 CFAR: c000000000008874 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 1 ... NIP [c0000000000a4000] memset+0x68/0x104 LR [c00000000012f43c] mm_init+0x27c/0x2f0 Call Trace: mm_init+0x260/0x2f0 (unreliable) copy_mm+0x11c/0x638 copy_process.isra.28.part.29+0x6fc/0x1080 _do_fork+0xdc/0x4c0 ppc_clone+0x8/0xc Instruction dump: 409e000c b0860000 38c60002 409d000c 90860000 38c60004 78a0d183 78a506a0 7c0903a6 41820034 60000000 60420000 <f8860000> f8860008 f8860010 f8860018 Fixes: fc5c2f4a ("powerpc/mm/hash64: Zero PGD pages on allocation") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by:
Rick Lindsley <ricklind@vnet.linux.ibm.com> Signed-off-by:
-
Dan Carpenter authored
commit 6a024330 upstream. The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR. Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow. Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam Fixes: 6db71994 ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit c8ea3663 upstream. strndup_user() returns error pointers on error, and then in the error handling we pass the error pointers to kfree(). It will cause an Oops. Link: http://lkml.kernel.org/r/20181218082003.GD32567@kadam Fixes: 6db71994 ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by:
-
