- 23 Jun, 2011 40 commits
-
-
Dan Williams authored
commit e7a46b4d upstream. It's currently exposed only through /proc which, besides requiring screen-scraping, doesn't allow userspace to distinguish between two identical ATM adapters with different ATM indexes. The ATM device index is required when using PPPoATM on a system with multiple ATM adapters. Signed-off-by:
Dan Williams <dcbw@redhat.com> Reviewed-by:
Eric Dumazet <eric.dumazet@gmail.com> Tested-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Milan Broz authored
commit f4808ca9 upstream. This patch adds a check that a block device has a request function defined before it is used. Otherwise, misconfiguration can cause an oops. Because we are allowing devices with zero size e.g. an offline multipath device as in commit 2cd54d9b ("dm: allow offline devices") there needs to be an additional check to ensure devices are initialised. Some block devices, like a loop device without a backing file, exist but have no request function. Reproducer is trivial: dm-mirror on unbound loop device (no backing file on loop devices) dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0" and mirror resync will immediatelly cause OOps. BUG: unable to handle kernel NULL pointer dereference at (null) ? generic_make_request+0x2bd/0x590 ? kmem_cache_alloc+0xad/0x190 submit_bio+0x53/0xe0 ? bio_add_page+0x3b/0x50 dispatch_io+0x1ca/0x210 [dm_mod] ? read_callback+0x0/0xd0 [dm_mirror] dm_io+0xbb/0x290 [dm_mod] do_mirror+0x1e0/0x748 [dm_mirror] Signed-off-by:
Milan Broz <mbroz@redhat.com> Reported-by:
Zdenek Kabelac <zkabelac@redhat.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Tero Kristo authored
commit 7467571f upstream. Cpuidle menu governor is using u32 as a temporary datatype for storing nanosecond values which wrap around at 4.294 seconds. This causes errors in predicted sleep times resulting in higher than should be C state selection and increased power consumption. This also breaks cpuidle state residency statistics. Signed-off-by:
Tero Kristo <tero.kristo@nokia.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Luca Tettamanti authored
commit bc1f419c upstream. i8k uses lahf to read the flag register in 64-bit code; early x86-64 CPUs, however, lack this instruction and we get an invalid opcode exception at runtime. Use pushf to load the flag register into the stack instead. Signed-off-by:
Luca Tettamanti <kronos.it@gmail.com> Reported-by:
Jeff Rickman <jrickman@myamigos.us> Tested-by:
Harry G McGavran Jr <w5pny@arrl.net> Cc: Massimo Dal Zotto <dz@debian.org> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Artem Bityutskiy authored
commit eaeee242 upstream. When re-mounting from R/O mode to R/W mode and the LEB count in the superblock is not up-to date, because for the underlying UBI volume became larger, we re-write the superblock. We allocate RAM for these purposes, but never free it. So this is a memory leak, although very rare one. Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
-
Tyler Hicks authored
commit 8d08dab7 upstream. The buffers allocated while encrypting and decrypting long filenames can sometimes straddle two pages. In this situation, virt_to_scatterlist() will return -ENOMEM, causing the operation to fail and the user will get scary error messages in their logs: kernel: ecryptfs_write_tag_70_packet: Internal error whilst attempting to convert filename memory to scatterlist; expected rc = 1; got rc = [-12]. block_aligned_filename_size = [272] kernel: ecryptfs_encrypt_filename: Error attempting to generate tag 70 packet; rc = [-12] kernel: ecryptfs_encrypt_and_encode_filename: Error attempting to encrypt filename; rc = [-12] kernel: ecryptfs_lookup: Error attempting to encrypt and encode filename; rc = [-12] The solution is to allow up to 2 scatterlist entries to be used. Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
Christian Lamparter authored
commit 9368a9a2 upstream. Reported-by:
Mark Davis <marked86@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Alan Stern authored
commit 2b7aaf50 upstream. This patch (as1463) fixes a regression caused by commit 3df7169e (OHCI: work around for nVidia shutdown problem). The original problem encountered by people using NVIDIA chipsets was that USB devices were not turning off when the system shut down. For example, the LED on an optical mouse would remain on, draining a laptop's battery. The problem was caused by a bug in the chipset; an OHCI controller in the Reset state would continue to drive a bus reset signal even after system shutdown. The workaround was to put the controllers into the Suspend state instead. It turns out that later NVIDIA chipsets do not suffer from this bug. Instead some have the opposite bug: If a system is shut down while an OHCI controller is in the Suspend state, USB devices remain powered! On other systems, shutting down with a Suspended controller causes the system to reboot immediately. Thus, working around the original bug on some machines exposes other bugs on other machines. The best solution seems to be to limit the workaround to OHCI controllers with a low-numbered PCI product ID. I don't know exactly at what point NVIDIA changed their chipsets; the value used here is a guess. So far it was worked out okay for all the people who have tested it. This fixes Bugzilla #35032. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by:
Yury Siamashka <yurand2@gmail.com> Signed-off-by:
-
Sarah Sharp authored
commit b513d447 upstream. Dmitry's patch dfa49c4a USB: xhci - fix math in xhci_get_endpoint_interval() introduced a bug. The USB 2.0 spec says that full speed isochronous endpoints' bInterval must be decoded as an exponent to a power of two (e.g. interval = 2^(bInterval - 1)). Full speed interrupt endpoints, on the other hand, don't use exponents, and the interval in frames is encoded straight into bInterval. Dmitry's patch was supposed to fix up the full speed isochronous to parse bInterval as an exponent, but instead it changed the *interrupt* endpoint bInterval decoding. The isochronous endpoint encoding was the same. This caused full speed devices with interrupt endpoints (including mice, hubs, and USB to ethernet devices) to fail under NEC 0.96 xHCI host controllers: [ 100.909818] xhci_hcd 0000:06:00.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x99, new slot info = 0x38100000 [ 100.909821] xhci_hcd 0000:06:00.0: xhci_check_bandwidth called for udev ffff88011f0ea000 ... [ 100.910187] xhci_hcd 0000:06:00.0: ERROR: unexpected command completion code 0x11. [ 100.910190] xhci_hcd 0000:06:00.0: xhci_reset_bandwidth called for udev ffff88011f0ea000 When the interrupt endpoint was added and a Configure Endpoint command was issued to the host, the host controller would return a very odd error message (0x11 means "Slot Not Enabled", which isn't true because the slot was enabled). Probably the host controller was getting very confused with the bad encoding. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Dmitry Torokhov <dtor@vmware.com> Reported-by:
Thomas Lindroth <thomas.lindroth@gmail.com> Tested-by:
-
Felipe Balbi authored
commit 472b9127 upstream. composite.c always sets req->length to zero and expects function driver's setup handlers to return the amount of bytes to be used on req->length. If we test against req->length w_length will always be greater than req->length thus making us always stall that particular SEND_ENCAPSULATED_COMMAND request. Tested against a Windows XP SP3. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
commit bf1f0a05 upstream. on 9g20 they are the same as the 9260 Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Hermann Kneissel authored
commit b4026c45 upstream. This patch fixes a problem where data received from the gps is sometimes transferred incompletely to the serial port. If used in native mode now all data received via the bulk queue will be forwarded to the serial port. Signed-off-by:
Hermann Kneissel <herkne@gmx.de> Signed-off-by:
-
Benedek László authored
commit 37909fe5 upstream. Adding support for the TavIR STK500 (id 0403:FA33) Atmel AVR programmer device based on FTDI FT232RL. Signed-off-by:
Benedek László <benedekl@gmail.com> Signed-off-by:
-
Elizabeth Jennifer Myers authored
commit 3938a0b3 upstream. Tested on my phone, the ttyUSB device is created and is fully functional. Signed-off-by:
Elizabeth Jennifer Myers <elizabeth@sporksirc.net> Signed-off-by:
-
Craig Shelley authored
commit 4eff0b40 upstream. This patch adds 4 device IDs for CP2102 based devices manufactured by AC-Services. See http://www.ac-services.eu for further info. Signed-off-by:
Craig Shelley <craig@microtron.org.uk> Signed-off-by:
-
Namhyung Kim authored
commit a1c15c59 upstream. When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Namhyung Kim authored
commit 78f4bb36 upstream. The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by:
-
Linus Torvalds authored
commit 8c8def26 upstream. I'm not entirely sure it needs to go into 32, but it's probably the right thing to do. Another way of explaining the patch is: - we currently pick the _first_ exactly matching bus resource entry, but the _last_ inexactly matching one. Normally first/last shouldn't matter, but bus resource entries aren't actually all created equal: in a transparent bus, the last resources will be the parent resources, which we should generally try to avoid unless we have no choice. So "first matching" is the thing we should always aim for. - the patch is a bit bigger than it needs to be, because I simplified the logic at the same time. It used to be a fairly incomprehensible if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) best = r; /* Approximating prefetchable by non-prefetchable */ and technically, all the patch did was to make that complex choice be even more complex (it basically added a "&& !best" to say that if we already gound a non-prefetchable window for the prefetchable resource, then we won't override an earlier one with that later one: remember "first matching"). - So instead of that complex one with three separate conditionals in one, I split it up a bit, and am taking advantage of the fact that we already handled the exact case, so if 'res->flags' has the PREFETCH bit, then we already know that 'r->flags' will _not_ have it. So the simplified code drops the redundant test, and does the new '!best' test separately. It also uses 'continue' as a way to ignore the bus resource we know doesn't work (ie a prefetchable bus resource is _not_ acceptable for anything but an exact match), so it turns into: /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ if (r->flags & IORESOURCE_PREFETCH) continue; /* .. but we can put a prefetchable resource inside a non-prefetchable one */ if (!best) best = r; instead. With the comments, it's now six lines instead of two, but it's conceptually simpler, and I _could_ have written it as two lines: if ((res->flags & IORESOURCE_PREFETCH) && !best) best = r; /* Approximating prefetchable by non-prefetchable */ but I thought that was too damn subtle. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Andrew Barry authored
commit cfa54a0f upstream. I believe I found a problem in __alloc_pages_slowpath, which allows a process to get stuck endlessly looping, even when lots of memory is available. Running an I/O and memory intensive stress-test I see a 0-order page allocation with __GFP_IO and __GFP_WAIT, running on a system with very little free memory. Right about the same time that the stress-test gets killed by the OOM-killer, the utility trying to allocate memory gets stuck in __alloc_pages_slowpath even though most of the systems memory was freed by the oom-kill of the stress-test. The utility ends up looping from the rebalance label down through the wait_iff_congested continiously. Because order=0, __alloc_pages_direct_compact skips the call to get_page_from_freelist. Because all of the reclaimable memory on the system has already been reclaimed, __alloc_pages_direct_reclaim skips the call to get_page_from_freelist. Since there is no __GFP_FS flag, the block with __alloc_pages_may_oom is skipped. The loop hits the wait_iff_congested, then jumps back to rebalance without ever trying to get_page_from_freelist. This loop repeats infinitely. The test case is pretty pathological. Running a mix of I/O stress-tests that do a lot of fork() and consume all of the system memory, I can pretty reliably hit this on 600 nodes, in about 12 hours. 32GB/node. Signed-off-by:
Andrew Barry <abarry@cray.com> Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Rik van Riel<riel@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mark Brown authored
commit fb5af53d upstream. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
Mark Brown authored
commit d0b48af6 upstream. Also fix a left/right typo while we're at it. Signed-off-by:
-
David Henningsson authored
commit e033ebfb upstream. There are no signs of a dmic at node 0x0b, so the user is left with an additional internal mic which does not exist. This commit removes that non-existing mic. BugLink: http://bugs.launchpad.net/bugs/731706Reported-by:
James Page <james.page@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Milton Miller authored
commit 5db1256a upstream. Move the smp_rmb after cpu_relax loop in read_seqlock and add ACCESS_ONCE to make sure the test and return are consistent. A multi-threaded core in the lab didn't like the update from 2.6.35 to 2.6.36, to the point it would hang during boot when multiple threads were active. Bisection showed af5ab277 (clockevents: Remove the per cpu tick skew) as the culprit and it is supported with stack traces showing xtime_lock waits including tick_do_update_jiffies64 and/or update_vsyscall. Experimentation showed the combination of cpu_relax and smp_rmb was significantly slowing the progress of other threads sharing the core, and this patch is effective in avoiding the hang. A theory is the rmb is affecting the whole core while the cpu_relax is causing a resource rebalance flush, together they cause an interfernce cadance that is unbroken when the seqlock reader has interrupts disabled. At first I was confused why the refactor in 3c22cd57 (kernel: optimise seqlock) didn't affect this patch application, but after some study that affected seqcount not seqlock. The new seqcount was not factored back into the seqlock. I defer that the future. While the removal of the timer interrupt offset created contention for the xtime lock while a cpu does the additonal work to update the system clock, the seqlock implementation with the tight rmb spin loop goes back much further, and is just waiting for the right trigger. Signed-off-by:
Milton Miller <miltonm@bga.com> Cc: <linuxppc-dev@lists.ozlabs.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Timo Warns authored
commit cae13fe4 upstream. As Ben Hutchings discovered [1], the patch for CVE-2011-1017 (buffer overflow in ldm_frag_add) is not sufficient. The original patch in commit c340b1d6 ("fs/partitions/ldm.c: fix oops caused by corrupted partition table") does not consider that, for subsequent fragments, previously allocated memory is used. [1] http://lkml.org/lkml/2011/5/6/407Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Timo Warns <warns@pre-sense.de> Signed-off-by:
-
David Chang authored
commit cacd18a8 upstream. Fix number_of_packets wrong endian conversion in function correct_endian_ret_submit() Signed-off-by:
David Chang <dchang@novell.com> Acked-by:
Arjan Mels <arjan.mels@gmx.net> Signed-off-by:
-
Frederic Weisbecker authored
commit ba9f207c upstream. HARDIRQ_ENTER() maps to irq_enter() which calls rcu_irq_enter(). But HARDIRQ_EXIT() maps to __irq_exit() which doesn't call rcu_irq_exit(). So for every locking selftest that simulates hardirq disabled, we create an imbalance in the rcu extended quiescent state internal state. As a result, after the first missing rcu_irq_exit(), subsequent irqs won't exit dyntick-idle mode after leaving the interrupt handler. This means that RCU won't see the affected CPU as being in an extended quiescent state, resulting in long grace-period delays (as in grace periods extending for hours). To fix this, just use __irq_enter() to simulate the hardirq context. This is sufficient for the locking selftests as we don't need to exit any extended quiescent state or perform any check that irqs normally do when they wake up from idle. As a side effect, this patch makes it possible to restore "rcu: Decrease memory-barrier usage based on semi-formal proof", which eventually helped finding this bug. Reported-and-tested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Roedel, Joerg authored
commit d47cc0db upstream. The workaround for Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=33012 introduced a read and a write to the MC4 mask msr. Unfortunatly this MSR is not emulated by the KVM hypervisor so that the kernel will get a #GP and crashes when applying this workaround when running inside KVM. This issue was reported as: https://bugzilla.kernel.org/show_bug.cgi?id=35132 and is fixed with this patch. The change just let the kernel ignore any #GP it gets while accessing this MSR by using the _safe msr access methods. Reported-by:
Török Edwin <edwintorok@gmail.com> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Boris Ostrovsky authored
commit e9cdd343 upstream. Commit b87cf80a added support for ARAT (Always Running APIC timer) on AMD processors that are not affected by erratum 400. This erratum is present on certain processor families and prevents APIC timer from waking up the CPU when it is in a deep C state, including C1E state. Determining whether a processor is affected by this erratum may have some corner cases and handling these cases is somewhat complicated. In the interest of simplicity we won't claim ARAT support on processor families below 0x12 and will go back to broadcasting timer when going idle. Signed-off-by:
Boris Ostrovsky <ostr@amd64.org> Link: http://lkml.kernel.org/r/1306423192-19774-1-git-send-email-ostr@amd64.orgTested-by:
Boris Petkov <borislav.petkov@amd.com> Cc: Hans Rosenfeld <Hans.Rosenfeld@amd.com> Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Samuel Thibault authored
commit fad4dab5 upstream. Commit 1292500b replaced "=m" (*field) : "1" (*field) with "=m" (*field) : with comment "The following patch fixes it by using the '+' operator on the (*field) operand, marking it as read-write to gcc." '+' was actually forgotten. This really puts it. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
-
Yang Ruirui authored
commit 26626f11 upstream. Add missing page_cache_release in the error path of ext4_mb_load_buddy Signed-off-by:
Yang Ruirui <ruirui.r.yang@tieto.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Ted Ts'o authored
commit d9b01934 upstream. If an application program does not make any changes to the indirect blocks or extent tree, i_datasync_tid will not get updated. If there are enough commits (i.e., 2**31) such that tid_geq()'s calculations wrap, and there isn't a currently active transaction at the time of the fdatasync() call, this can end up triggering a BUG_ON in fs/jbd/commit.c: J_ASSERT(journal->j_running_transaction != NULL); It's pretty rare that this can happen, since it requires the use of fdatasync() plus *very* frequent and excessive use of fsync(). But with the right workload, it can. We fix this by replacing the use of tid_geq() with an equality test, since there's only one valid transaction id that is valid for us to start: namely, the currently running transaction (if it exists). Reported-by: Martin_Zielinski@McAfee.com Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 2842bb20 upstream. In do_get_write_access() we wait on BH_Unshadow bit for buffer to get from shadow state. The waking code in journal_commit_transaction() has a bug because it does not issue a memory barrier after the buffer is moved from the shadow state and before wake_up_bit() is called. Thus a waitqueue check can happen before the buffer is actually moved from the shadow state and waiting process may never be woken. Fix the problem by issuing proper barrier. Reported-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
Jan Kara authored
commit 86c4f6d8 upstream. When make_indexed_dir() fails (e.g. because of ENOSPC) after it has allocated block for index tree root, we did not properly mark all changed buffers dirty. This lead to only some of these buffers being written out and thus effectively corrupting the directory. Fix the issue by marking all changed data dirty even in the error failure case. Signed-off-by:
-
Jiri Olsa authored
commit 26afb7c6 upstream. As reported in BZ #30352: https://bugzilla.kernel.org/show_bug.cgi?id=30352 there's a kernel bug related to reading the last allowed page on x86_64. The _copy_to_user() and _copy_from_user() functions use the following check for address limit: if (buf + size >= limit) fail(); while it should be more permissive: if (buf + size > limit) fail(); That's because the size represents the number of bytes being read/write from/to buf address AND including the buf address. So the copy function will actually never touch the limit address even if "buf + size == limit". Following program fails to use the last page as buffer due to the wrong limit check: #include <sys/mman.h> #include <sys/socket.h> #include <assert.h> #define PAGE_SIZE (4096) #define LAST_PAGE ((void*)(0x7fffffffe000)) int main() { int fds[2], err; void * ptr = mmap(LAST_PAGE, PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED, -1, 0); assert(ptr == LAST_PAGE); err = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); assert(err == 0); err = send(fds[0], ptr, PAGE_SIZE, 0); perror("send"); assert(err == PAGE_SIZE); err = recv(fds[1], ptr, PAGE_SIZE, MSG_WAITALL); perror("recv"); assert(err == PAGE_SIZE); return 0; } The other place checking the addr limit is the access_ok() function, which is working properly. There's just a misleading comment for the __range_not_ok() macro - which this patch fixes as well. The last page of the user-space address range is a guard page and Brian Gerst observed that the guard page itself due to an erratum on K8 cpus (#121 Sequential Execution Across Non-Canonical Boundary Causes Processor Hang). However, the test code is using the last valid page before the guard page. The bug is that the last byte before the guard page can't be read because of the off-by-one error. The guard page is left in place. This bug would normally not show up because the last page is part of the process stack and never accessed via syscalls. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
Brian Gerst <brgerst@gmail.com> Acked-by:
-
Felix Radensky authored
commit 431e1eca upstream. Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by:
Felix Radensky <felix@embedded-sol.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
James Bottomley authored
commit 0a58e077 upstream. blk_cleanup_queue() calls elevator_exit() and after this, we can't touch the elevator without oopsing. __elv_next_request() must check for this state because in the refcounted queue model, we can still call it after blk_cleanup_queue() has been called. This was reported as causing an oops attributable to scsi. Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Tejun Heo authored
commit 02e35228 upstream. __blkdev_get() doesn't rescan partitions if disk->fops->open() fails, which leads to ghost partition devices lingering after medimum removal is known to both the kernel and userland. The behavior also creates a subtle inconsistency where O_NONBLOCK open, which doesn't fail even if there's no medium, clears the ghots partitions, which is exploited to work around the problem from userland. Fix it by updating __blkdev_get() to issue partition rescan after -ENOMEDIA too. This was reported in the following bz. https://bugzilla.kernel.org/show_bug.cgi?id=13029 Stable: 2.6.38 Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
David Zeuthen <zeuthen@gmail.com> Reported-by:
Martin Pitt <martin.pitt@ubuntu.com> Reported-by:
Kay Sievers <kay.sievers@vrfy.org> Tested-by:
-
Eric B Munson authored
commit ad5d5292 upstream. Commit 0837e324 fixes a situation on POWER7 where events can roll back if a specualtive event doesn't actually complete. This can raise a performance monitor exception. We need to catch this to ensure that we reset the PMC. In all cases the PMC will be less than 256 cycles from overflow. This patch lifts Anton's fix for the problem in perf and applies it to oprofile as well. Signed-off-by:
Eric B Munson <emunson@mgebm.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Milton Miller authored
commit 3d2cea73 upstream. Commit 1fc711f7 (powerpc/kexec: Fix race in kexec shutdown) moved the write to signal the cpu had exited the kernel from before the transition to real mode in kexec_smp_wait to kexec_wait. Unfornately it missed that kexec_wait is used both by cpus leaving the kernel and by secondary slave cpus that were not allocated a paca for what ever reason -- they could be beyond nr_cpus or not described in the current device tree for whatever reason (for example, kexec-load was not refreshed after a cpu hotplug operation). Cpus coming through that path they will write to paca[NR_CPUS] which is beyond the space allocated for the paca data and overwrite memory not allocated to pacas but very likely still real mode accessable). Move the write back to kexec_smp_wait, which is used only by cpus that found their paca, but after the transition to real mode. Signed-off-by:
-
steven finney authored
commit 98586ed8 upstream. When a CPU is taken offline in an SMP system, cpufreq_remove_dev() nulls out the per-cpu policy before cpufreq_stats_free_table() can make use of it. cpufreq_stats_free_table() then skips the call to sysfs_remove_group(), leaving about 100 bytes of sysfs-related memory unclaimed each time a CPU-removal occurs. Break up cpu_stats_free_table into sysfs and table portions, and call the sysfs portion early. Signed-off-by:
Steven Finney <steven.finney@palm.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
