- 10 Dec, 2019 12 commits
-
-
Kuninori Morimoto authored
This patch moves soc_link_dai_pcm_new() to upper side. This is prepare for its cleanup. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/874ky9yq5o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Now soc-core and soc-topology is using snd_soc_remove_dai_link(). It removes pcm_runtime (= rtd) and disconnect it from card. The purpose is removing pcm_runtime, not dai_link. This patch renames function name. Signed-off-by:
-
Kuninori Morimoto authored
Now soc-core and soc-topology is using snd_soc_add_dai_link(). The abstract of this function is "create pcm_runtime from dai_link information and connect it to card". Thus, "add dai_link" is wrong/confusable naming. This patch renames function name. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_find_dai_link() is soc-topology specific function. We don't need to have it at soc-core. This patch moves it to soc-topology.c Signed-off-by:
-
Kuninori Morimoto authored
Current snd_soc_get_pcm_runtime() is finding rtd by checking dai_link name. But, it is strange and waste of CPU power, because its user want to get from rtd from dai_link, not from dai_link name. This patch find rtd via dai_link pointer instead of its name. Signed-off-by:
-
Kuninori Morimoto authored
This patch moves snd_soc_get_pcm_runtime() next to snd_soc_get_dai_substream(). This is prepare for snd_soc_get_pcm_runtime() cleanup. Signed-off-by:
-
Kuninori Morimoto authored
No driver is using snd_soc_get_dai_substream(), and snd_soc_get_pcm_runtime() is enough for such purpose. We can revival it if it was needed in the future. Let's remove unused function. Signed-off-by:
-
Kuninori Morimoto authored
Sound card disconnecting operation was needed when "sound driver" was unbinded without unbinding "sound card". In such case, sound driver should be stopped even though it was playbacking/capturing. Otherwise clock open/close counter mismatch happen. One headache was that we can't skip unbind in error case because unbind operation doesn't check return value from each drivers. snd_soc_disconnect_sync() was added for these purpose, and Renesas sound card only is used it. But now, ALSA SoC automatically disconnect sound card when sound driver was unbinded. Thus, snd_soc_disconnect_sync() is no longer needed. This patch removes it. Signed-off-by:
-
Kuninori Morimoto authored
ASoC is using many lists. Now, used dai_link is listed to card as dai_link_list. [card]->[dai_link]->[dai_link]->... BTW, this "dai_link" is used to create "rtd". And this rtd is listed to card as rtd_list. [card]->[rtd]->[rtd]->... Here, each rtd has dai_link. This means, we can track all dai_link via rtd list. This patch removes card dai_link_list, and uses rtd_list instead of it. Signed-off-by:
-
Kai Vehmanen authored
Add a module parameter 'codec_mask' to filter out unwanted HDA codecs from driver probe. E.g. on most systems, codec_mask=4 will limit to HDMI audio and exclude any external HDA codecs. Similar to 'probe_mask' module parameter of snd-hda-intel. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Slawomir Blauciak authored
This change adds stream map and channel map structures used for channel re-routing and stream aggregation. Signed-off-by:
Slawomir Blauciak <slawomir.blauciak@linux.intel.com> Signed-off-by:
-
Seppo Ingalsuo authored
This patch adds into SOF topology the handling of ASRC DAPM type, adds the tokens to configure the ASRC, and implement component IPC into the driver. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by:
-
- 09 Dec, 2019 28 commits
-
-
Ranjani Sridharan authored
Set the drv_name and tplg_filename for nocodec machine driver in sof_machine_check(). This means the sof_nocodec_setup() does not need the mach, plat_data or desc arguments any longer. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Daniel Baluta authored
This field is only set but never used. Let's remove it to make code cleaner. Signed-off-by:
-
Ranjani Sridharan authored
Remove nocodec_fw_filename from struct sof_dev_desc as it is not longer needed. Signed-off-by:
-
Daniel Baluta authored
Currently, SOF probes machine drivers by creating a platform device and passing the machine description as private data. This is driven by the ACPI restrictions. Ideally, ACPI tables should contain the description for the machine driver. This is not possible because ACPI tables are frozen and used on multiple OS-es (e.g Windows). In the case of Device Tree we don't have this restriction, so we choose to probe the machine drivers by creating a DT node as is the standard ALSA way. This patch makes the probing of machine drivers from SOF core optional allowing for Device Tree platforms to decouple the SOF core from machine driver probing. Along with this, it also consolidates the machine driver selection for Intel platforms by defining optional ops for selecting the machine driver based on the ACPI match for HDA and non-HDA platforms and setting the mach params. Signed-off-by:
-
Ranjani Sridharan authored
The machine driver selection for HDA platforms will be consolidated and moved out of the SOF DSP probe callback. In preparation for that, modify the signature for hda_codec_probe_bus() to pass the hda_codec_use_common_hdmi as a variable while probing the HDA codecs. Signed-off-by:
-
Ranjani Sridharan authored
Move all the audio-specific code in the core, audio-specific logic in the top-level PM callbacks and the core header files into a separate file (sof-audio.*) in preparation for adding an audio client device. In the process of moving all structure definitions for widget, routes, pcm's etc, the snd_sof_dev member in all these structs is replaced with the snd_soc_component member. Also, use the component device instead of the snd_sof_dev device wherever possible in the PCM component driver, control IO functions and the topology parser as the component device will be moved over to the client device later on. Signed-off-by:
-
Ranjani Sridharan authored
Currently the FW filename is obtained from the ACPI matching table when determining which machine driver to use. In preparation for making the machine driver ACPI match optional for Device Tree platforms and moving the machine driver selection out of the SOF core, this patch introduces the default_fw_filename member in struct sof_dev_desc. Once the machine driver selection is moved out of SOF core, the nocodec_fw_filename will become obsolete and will be removed. Signed-off-by:
-
Ranjani Sridharan authored
For some platforms, the refcount is explicitly incremented to prevent it from entering runtime suspend. This should be be done during probe in the core instead of being done in the PCM driver. Signed-off-by:
-
Ranjani Sridharan authored
Modify the signature for snd_sof_create_page_table to take struct device pointer as an argument instead of struct snd_sof_dev as this will be used by both the SOF core device and its clients. Also, move the definition out of core.c to utils.c. Signed-off-by:
-
Ranjani Sridharan authored
Remove snd_sof_init_topology() as it is never used. Signed-off-by:
-
Jaroslav Kysela authored
The long card name might be used in GUI. This information should be hidden. Add CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES configuration option. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
Jaroslav Kysela authored
Use the control interface (field 'components' in the info structure) to pass the I/O configuration details. The goal is to replace the card long name with this. Signed-off-by:
-
Jaroslav Kysela authored
It is required for the auto-detection in the user space (for UCM). Signed-off-by:
-
Jerome Brunet authored
The dai codec needs to ensure that on one dai is used at any time. This is currently protected by bit atomic operation. With this change, it done with a mutex instead. This change is not about functionality or efficiency. It is done with the hope that it help maintainability in the future. Suggested-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191206103542.485224-1-jbrunet@baylibre.comSigned-off-by:
-
Randy Dunlap authored
Fix a kernel-doc warning in soc-core.c by adding notation for @legacy_dai_naming. ../sound/soc/soc-core.c:2509: warning: Function parameter or member 'legacy_dai_naming' not described in 'snd_soc_register_dai' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/2215ee04-e870-5eea-a00c-9a5caf06faae@infradead.orgSigned-off-by:
-
Bard Liao authored
The existing code uses two handlers for a shared edge-based MSI interrupts. In corner cases, interrupts are lost, leading to IPC timeouts. Those timeouts do not appear in legacy mode. This patch merges the two handlers and threads into a single one, and simplifies the mask/unmask operations by using a single top-level mask (Global Interrupt Enable). The handler only checks for interrupt sources using the Global Interrupt Status (GIS) field, and all the actual work happens in the thread. This also enables us to remove the use of spin locks. Stream events are prioritized over IPC ones. This patch was tested with HDaudio and SoundWire platforms, and all known IPC timeout issues are solved in MSI mode. The SoundWire-specific patches will be provided in follow-up patches, where the SoundWire interrupts are handled in the same thread as IPC and stream interrupts. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Peter Ujfalusi authored
When McASP is master the bclk can be generated from two main source: AUXCLK: functional clock for McASP or AHCLK: from external source or internal mux in dra7x family With this patch it is possible to select between the two source. The patch is not breaking existing machine drivers since historically the clk_id was ignored and left as 0 in all cases. When output clock is configured - which can be only the AHCLK, we select the AUXCLK as source for the internal HCLK. In this case the HCLK rate is the same as the output clock. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191204192005.31210-1-peter.ujfalusi@ti.comSigned-off-by:
-
Olivier Moysan authored
Add "DAC mux" DAPM widget in CS42l51 audio codec routes, to support DAC mux control and to remove error trace "DAC Mux has no paths" at widget creation. Note: ADC path of DAC mux is not routed in this patch. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20191203141627.29471-1-olivier.moysan@st.comSigned-off-by:
-
Geert Uytterhoeven authored
There is no need to store the inverted DALIGN values in the table, as they can easily be calculated at run-time. This also protects against the introduction of inconsistencies between normal and inverted values by a future table modification. Reorder the two subexpressions in the AND check, to perform the least expensive check first. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
-
Nikita Yushchenko authored
Chip supports soft stepping of volume changes and it is enabled by default. This patch adds a control for it, so it could be either made slower (two sample periods per step instead of one), or disabled. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20191129132719.11603-1-nikita.yoush@cogentembedded.comSigned-off-by:
-
Tzung-Bi Shih authored
According to the datasheet, there are some registers can only be changed when SHDN is 0. Changing these settings during SHDN = 1 can compromise device stability and performance specifications. Saves SHDN before writing to these sensitive registers and restores SHDN afterward. Here is the register list codec driver of max98090 wants to change: M98090_REG_QUICK_SYSTEM_CLOCK 0x04 M98090_REG_QUICK_SAMPLE_RATE 0x05 M98090_REG_DAI_INTERFACE 0x06 M98090_REG_DAC_PATH 0x07 M98090_REG_MIC_DIRECT_TO_ADC 0x08 M98090_REG_LINE_TO_ADC 0x09 M98090_REG_ANALOG_MIC_LOOP 0x0A M98090_REG_ANALOG_LINE_LOOP 0x0B M98090_REG_SYSTEM_CLOCK 0x1B M98090_REG_CLOCK_MODE 0x1C M98090_REG_CLOCK_RATIO_NI_MSB 0x1D M98090_REG_CLOCK_RATIO_NI_LSB 0x1E M98090_REG_CLOCK_RATIO_MI_MSB 0x1F M98090_REG_CLOCK_RATIO_MI_LSB 0x20 M98090_REG_MASTER_MODE 0x21 M98090_REG_INTERFACE_FORMAT 0x22 M98090_REG_TDM_CONTROL 0x23 M98090_REG_TDM_FORMAT 0x24 M98090_REG_IO_CONFIGURATION 0x25 M98090_REG_FILTER_CONFIG 0x26 M98090_REG_INPUT_ENABLE 0x3E M98090_REG_OUTPUT_ENABLE 0x3F M98090_REG_BIAS_CONTROL 0x42 M98090_REG_DAC_CONTROL 0x43 M98090_REG_ADC_CONTROL 0x44 M98090_REG_DRC_TIMING 0x33 M98090_REG_DRC_COMPRESSOR 0x34 M98090_REG_DRC_EXPANDER 0x35 M98090_REG_DSP_FILTER_ENABLE 0x41 M98090_REG_EQUALIZER_BASE 0x46 M98090_REG_RECORD_BIQUAD_BASE 0xAF M98090_REG_DIGITAL_MIC_ENABLE 0x13 M98090_REG_DIGITAL_MIC_CONFIG 0x14 Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191128151908.180871-1-tzungbi@google.comSigned-off-by:
-
Michael Walle authored
The LS1028A SoC uses the same interrupt line for adjacent SAIs. Use IRQF_SHARED to be able to use these SAIs simultaneously. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Acked-by:
-
Nikita Yushchenko authored
HP output driver has two parameters that can be configured to reduce pop noise: power-on delay and ramp-up step time. Two new kcontrols have been added to set these parameters. Also have to alter timeout in aic31xx_dapm_power_event() because default timeout does fire when higher supported power-on delay are configured. Signed-off-by:
-
Eason Yen authored
Refine mtk_afe_fe_hw_params and mtk_afe_fe_prepare by these helpers. - mtk_memif_set_enable - mtk_memif_set_disable - mtk_memif_set_addr - mtk_memif_set_channel - mtk_memif_set_rate - mtk_memif_set_rate_substream - mtk_memif_set_format - mtk_memif_set_pbuf_size Signed-off-by:
Eason Yen <eason.yen@mediatek.com> Link: https://lore.kernel.org/r/1573814926-15805-3-git-send-email-eason.yen@mediatek.comSigned-off-by:
-
Eason Yen authored
1. Add the following helper in mtk-afe-fe-dai to control to control mtk_memif - mtk_memif_set_enable - mtk_memif_set_disable - mtk_memif_set_addr - mtk_memif_set_channel - mtk_memif_set_rate - mtk_memif_set_rate_substream - mtk_memif_set_format - mtk_memif_set_pbuf_size 2.extend mtk_base_memif_data struct for new platform Signed-off-by:
-
Kai Vehmanen authored
This reverts commit 019033c8 ("ASoC: Intel: hdac_hdmi: add Icelake support"). Icelake HDMI audio is supported by the HDMI codec driver, which can be used both in non-DSP (legacy HDA) and with DSP (SOF) configurations. Signed-off-by:
-
Kai Vehmanen authored
Modify Kconfig rules for machine drivers used by SOF to pick SND_HDA_CODEC_HDMI by default if other conditions are met. For shared machine drivers used also by older SST driver, keep using HDAC_HDMI. Signed-off-by:
-
Kai Vehmanen authored
Use the common HDMI driver by default if the codec driver is selected in kernel build. Signed-off-by:
-
