- 19 Aug, 2022 22 commits
-
-
Sean Anderson authored
memac is the only mac which parses fixed links. Move the parsing/configuring to its initialization function. Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Acked-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sean Anderson authored
Move the reference to our device to mac_device. This way, macs can use it in their log messages. Signed-off-by:
-
Sean Anderson authored
Instead of re-matching the compatible string in order to determine the init function, just store it in the match data. The separate setup functions aren't needed anymore. Merge their content into init as well. To ensure everything compiles correctly, we move them to the bottom of the file. Signed-off-by:
-
Sean Anderson authored
This moves the reading of the PCS property out of the generic probe and into the mac-specific initialization function. This reduces the mac-specific jobs done in the top-level probe function. Signed-off-by:
-
Sean Anderson authored
There are two ways that GRS can be set: graceful_stop and dtsec_isr. It is cleared by graceful_start. If it is already set before calling graceful_stop, then that means that dtsec_isr set it. In that case, we will not set GRS nor will we clear it (which seems like a bug?). For GTS the logic is similar, except that there is no one else messing with this bit (so we will always set and clear it). Simplify the logic by always setting/clearing GRS/GTS. This is less racy that the previous behavior, and ensures that we always end up clearing the bits. This can of course clear GRS while dtsec_isr is waiting, but because we have already done our own waiting it should be fine. This is the last user of enum comm_mode, so remove it. Signed-off-by:
-
Sean Anderson authored
All macs use the same start/stop functions. The actual mac-specific code lives in enable/disable. Move these functions to an appropriate struct, and inline the phy enable/disable calls to the caller of start/stop. Signed-off-by:
-
Sean Anderson authored
mac_priv_s->enable() and ->disable() are always called with a comm_mode of COMM_MODE_RX_AND_TX. Remove this parameter, and refactor the macs appropriately. Signed-off-by:
-
Sean Anderson authored
This converts the license text of files in the fman directory to use SPDX license identifiers instead. Signed-off-by:
-
Sean Anderson authored
This converts the MAC portion of the FMan MAC bindings to yaml. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Jakub Kicinski authored
This reverts commit 5417197d, reversing changes made to 0630f64d. Reverting to allow addressing review comments. Link: https://lore.kernel.org/all/4c5dbea0-52a9-1c3d-7547-00ea54c90550@linux.intel.com/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
Lorenzo Bianconi authored
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817173628.109102-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== selftests: mlxsw: Add ordering tests for unified bridge model Amit Cohen writes: Commit 798661c7 ("Merge branch 'mlxsw-unified-bridge-conversion-part-6'") converted mlxsw driver to use unified bridge model. In the legacy model, when a RIF was created / destroyed, it was firmware's responsibility to update it in the relevant FID classification records. In the unified bridge model, this responsibility moved to software. This set adds tests to check the order of configuration for the following classifications: 1. {Port, VID} -> FID 2. VID -> FID 3. VNI -> FID (after decapsulation) In addition, in the legacy model, software is responsible to update a table which is used to determine the packet's egress VID. Add a test to check that the order of configuration does not impact switch behavior. See more details in the commit messages. Note that the tests supposed to pass also using the legacy model, they are added now as with the new model they test the driver and not the firmware. Patch set overview: Patch #1 adds test for {Port, VID} -> FID Patch #2 adds test for VID -> FID Patch #3 adds test for VNI -> FID Patch #4 adds test for egress VID classification ==================== Link: https://lore.kernel.org/r/cover.1660747162.git.petrm@nvidia.comSigned-off-by:
-
Amit Cohen authored
After routing, the device always consults a table that determines the packet's egress VID based on {egress RIF, egress local port}. In the unified bridge model, it is up to software to maintain this table via REIV register. The table needs to be updated in the following flows: 1. When a RIF is set on a FID, for each FID's {Port, VID} mapping, a new {RIF, Port}->VID mapping should be created. 2. When a {Port, VID} is mapped to a FID and the FID already has a RIF, a new {RIF, Port}->VID mapping should be created. Add a test to verify that packets get the correct VID after routing, regardless of the order of the configuration. # ./egress_vid_classification.sh TEST: Add RIF for existing {port, VID}->FID mapping [ OK ] TEST: Add {port, VID}->FID mapping for FID with a RIF [ OK ] Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Before layer 2 forwarding, the device classifies an incoming packet to a FID. After classification, the FID is known, but also all the attributes of the FID, such as the router interface (RIF) via which a packet that needs to be routed will ingress the router block. For VXLAN decapsulation, the FID classification is done according to the VNI. When a RIF is added on top of a FID, the existing VNI->FID mapping should be updated by the software with the new RIF. In addition, when a new mapping is added for FID which already has a RIF, the correct RIF should be used for it. Add a test to verify that packets can be routed after decapsulation which is done after VNI->FID classification, regardless of the order of the configuration. # ./ingress_rif_conf_vxlan.sh TEST: Add RIF for existing VNI->FID mapping [ OK ] TEST: Add VNI->FID mapping for FID with a RIF [ OK ] Signed-off-by:
-
Amit Cohen authored
Before layer 2 forwarding, the device classifies an incoming packet to a FID. After classification, the FID is known, but also all the attributes of the FID, such as the router interface (RIF) via which a packet that needs to be routed will ingress the router block. For VLAN-aware bridges (802.1Q), the FID classification is done according to VID. When a RIF is added on top of a FID, the existing VID->FID mapping should be updated by the software with the new RIF. We never map multiple VLANs to the same FID using VID->FID, so we cannot create VID->FID for FID which already has a RIF using 802.1Q. Anyway, verify that packets can be routed via port which is added after the FID already has a RIF. Add a test to verify that packets can be routed after VID->FID classification, regardless of the order of the configuration. # ./ingress_rif_conf_1q.sh TEST: Add RIF for existing VID->FID mapping [ OK ] TEST: Add port to VID->FID mapping for FID with a RIF [ OK ] Signed-off-by:
-
Amit Cohen authored
Before layer 2 forwarding, the device classifies an incoming packet to a FID. After classification, the FID is known, but also all the attributes of the FID, such as the router interface (RIF) via which a packet that needs to be routed will ingress the router block. For VLAN-unaware bridges (802.1D), the FID classification is done according to {Port, VID}. When a RIF is added on top of a FID, all the existing {Port, VID}->FID mappings should be updated by the software with the new RIF. In addition, when a new mapping is added for FID which already has a RIF, the correct RIF should be used for it. Add a test to verify that packets can be routed after {Port, VID}->FID classification, regardless of the order of the configuration. # ./ingress_rif_conf_1d.sh TEST: Add RIF for existing {port, VID}->FID mapping [ OK ] TEST: Add {port, VID}->FID mapping for FID with a RIF [ OK ] Signed-off-by: -
Lorenzo Bianconi authored
Get rid of unnecessary txd_pdma pointer in mtk_xdp_submit_frame for loop since it is actually used at the end of the routine using latest mtk_tx_dma consumed pointer as reference. Signed-off-by:
-
Emeel Hakim authored
Expose MACSEC_SALT_LEN definition to user space to be used in various user space applications such as iproute. Iproute will use this as part of adding macsec extended packet number support. Reviewed-by:
Raed Salem <raeds@nvidia.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Emeel Hakim <ehakim@nvidia.com> Link: https://lore.kernel.org/r/20220818153229.4721-1-ehakim@nvidia.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF socket maps get data out of the TCP stack) - tls: rx: react to strparser initialization errors - netfilter: nf_tables: fix scheduling-while-atomic splat - net: fix suspicious RCU usage in bpf_sk_reuseport_detach() Current release - new code bugs: - mlxsw: ptp: fix a couple of races, static checker warnings and error handling Previous releases - regressions: - netfilter: - nf_tables: fix possible module reference underflow in error path - make conntrack helpers deal with BIG TCP (skbs > 64kB) - nfnetlink: re-enable conntrack expectation events - net: fix potential refcount leak in ndisc_router_discovery() Previous releases - always broken: - sched: cls_route: disallow handle of 0 - neigh: fix possible local DoS due to net iface start/stop loop - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu - virtio_net: fix endian-ness for RSS - dsa: mv88e6060: prevent crash on an unused port - fec: fix timer capture timing in `fec_ptp_enable_pps()` - ocelot: stats: fix races, integer wrapping and reading incorrect registers (the change of register definitions here accounts for bulk of the changed LoC in this PR)" * tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) net: moxa: MAC address reading, generating, validity checking tcp: handle pure FIN case correctly tcp: refactor tcp_read_skb() a bit tcp: fix tcp_cleanup_rbuf() for tcp_read_skb() tcp: fix sock skb accounting in tcp_read_skb() igb: Add lock to avoid data race dt-bindings: Fix incorrect "the the" corrections net: genl: fix error path memory leak in policy dumping stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove() net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run net/mlx5e: Allocate flow steering storage during uplink initialization net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset net: mscc: ocelot: make struct ocelot_stat_layout array indexable net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work net: mscc: ocelot: turn stats_lock into a spinlock net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: - fix landlock test build regression * tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/landlock: fix broken include of linux/landlock.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull rtla tool fixes from Steven Rostedt: "Fixes for the Real-Time Linux Analysis tooling: - Fix tracer name in comments and prints - Fix setting up symlinks - Allow extra flags to be set in build - Consolidate and show all necessary libraries not found in build error" * tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla: Consolidate and show all necessary libraries that failed for building tools/rtla: Build with EXTRA_{C,LD}FLAGS tools/rtla: Fix command symlinks rtla: Fix tracer name
-
- 18 Aug, 2022 18 commits
-
-
Jakub Kicinski authored
Wei Fang says: ==================== Add DT property to disable hibernation mode The patches add the ability to disable the hibernation mode of AR803x PHYs. Hibernation mode defaults to enabled after hardware reset on these PHYs. If the AR803x PHYs enter hibernation mode, they will not provide any clock. For some MACs, they might need the clocks which provided by the PHYs to support their own hardware logic. So, the patches add the support to disable hibernation mode by adding a boolean: qca,disable-hibernation-mode If one wished to disable hibernation mode to better match with the specifical MAC, just add this property in the phy node of DT. ==================== Link: https://lore.kernel.org/r/20220818030054.1010660-1-wei.fang@nxp.comSigned-off-by: -
Wei Fang authored
When the cable is unplugged, the Atheros AR803x PHYs will enter hibernation mode after about 10 seconds if the hibernation mode is enabled and will not provide any clock to the MAC. But for some MACs, this feature might cause unexpected issues due to the logic of MACs. Taking SYNP MAC (stmmac) as an example, if the cable is unplugged and the "eth0" interface is down, the AR803x PHY will enter hibernation mode. Then perform the "ifconfig eth0 up" operation, the stmmac can't be able to complete the software reset operation and fail to init it's own DMA. Therefore, the "eth0" interface is failed to ifconfig up. Why does it cause this issue? The truth is that the software reset operation of the stmmac is designed to depend on the RX_CLK of PHY. So, this patch offers an option for the user to determine whether to disable the hibernation mode of AR803x PHYs. Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Wei Fang authored
The hibernation mode of Atheros AR803x PHYs defaults to be enabled after hardware reset. When the cable is unplugged, the PHY will enter hibernation mode after about 10 seconds and the PHY clocks will be stopped to save power. However, some MACs need the phy output clock for proper functioning of their logic. For instance, stmmac needs the RX_CLK of PHY for software reset to complete. Therefore, add a DT property to configure the PHY to disable this hardware hibernation mode. Signed-off-by:
-
Sergei Antonov authored
This device does not remember its MAC address, so add a possibility to get it from the platform. If it fails, generate a random address. This will provide a MAC address early during boot without user space being involved. Also remove extra calls to is_valid_ether_addr(). Made after suggestions by Andrew Lunn: 1) Use eth_hw_addr_random() to assign a random MAC address during probe. 2) Remove is_valid_ether_addr() from moxart_mac_open() 3) Add a call to platform_get_ethdev_address() during probe 4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this v1 -> v2: Handle EPROBE_DEFER returned from platform_get_ethdev_address(). Move MAC reading code to the beginning of the probe function. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Suggested-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Cong Wang says: ==================== tcp: some bug fixes for tcp_read_skb() This patchset contains 3 bug fixes and 1 minor refactor patch for tcp_read_skb(). V1 only had the first patch, as Eric prefers to fix all of them together, I have to group them together. ==================== Link: https://lore.kernel.org/r/20220817195445.151609-1-xiyou.wangcong@gmail.comSigned-off-by:
-
Cong Wang authored
When skb->len==0, the recv_actor() returns 0 too, but we also use 0 for error conditions. This patch amends this by propagating the errors to tcp_read_skb() so that we can distinguish skb->len==0 case from error cases. Fixes: 04919bed ("tcp: Introduce tcp_read_skb()") Reported-by:
Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Cong Wang authored
As tcp_read_skb() only reads one skb at a time, the while loop is unnecessary, we can turn it into an if. This also simplifies the code logic. Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Cong Wang authored
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it assumes the skb is not yet dequeued. This is no longer true for tcp_read_skb() case where we dequeue the skb first. Fix this by introducing a helper __tcp_cleanup_rbuf() which does not require any skb and calling it in tcp_read_skb(). Fixes: 04919bed ("tcp: Introduce tcp_read_skb()") Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Cong Wang authored
Before commit 965b57b4 ("net: Introduce a new proto_ops ->read_skb()"), skb was not dequeued from receive queue hence when we close TCP socket skb can be just flushed synchronously. After this commit, we have to uncharge skb immediately after being dequeued, otherwise it is still charged in the original sock. And we still need to retain skb->sk, as eBPF programs may extract sock information from skb->sk. Therefore, we have to call skb_set_owner_sk_safe() here. Fixes: 965b57b4 ("net: Introduce a new proto_ops ->read_skb()") Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com Tested-by:
Stanislav Fomichev <sdf@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Lin Ma authored
The commit c23d92b8 ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 71947923 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834c ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b8 ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-17 (ice) This series contains updates to ice driver only. Grzegorz prevents modifications to VLAN 0 when setting VLAN promiscuous as it will already be set. He also ignores -EEXIST error when attempting to set promiscuous and ensures promiscuous mode is properly cleared from the hardware when being removed. Benjamin ignores additional -EEXIST errors when setting promiscuous mode since the existing mode is the desired mode. Sylwester fixes VFs to allow sending of tagged traffic when no VLAN filters exist. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF not able to send tagged traffic with no VLAN filters ice: Ignore error message when setting same promiscuous mode ice: Fix clearing of promisc mode with bridge over bond ice: Ignore EEXIST when setting promisc mode ice: Fix double VLAN error when entering promisc mode ==================== Link: https://lore.kernel.org/r/20220817171329.65285-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Geert Uytterhoeven authored
Lots of double occurrences of "the" were replaced by single occurrences, but some of them should become "to the" instead. Fixes: 12e5bde1 ("dt-bindings: Fix typo in comment") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.beSigned-off-by:
-
Maxime Chevallier authored
Add the ethtool_op_get_ts_info() callback to ethtool ops, so that we can at least use software timestamping. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/20220817095725.97444-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Jakub Kicinski authored
If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer. Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 50a896cf ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.orgSigned-off-by:
-
Christophe JAILLET authored
Commit 09f012e6 ("stmmac: intel: Fix clock handling on error and remove paths") removed this clk_disable_unprepare() This was partly revert by commit ac322f86 ("net: stmmac: Fix clock handling on remove path") which removed this clk_disable_unprepare() because: " While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. " However later on, commit 5ec55823 ("net: stmmac: add clocks management for gmac driver") has updated stmmac_dvr_remove() which do not call clk_disable_unprepare() anymore. So this call should now be called from intel_eth_pci_remove(). Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Jens Wiklander authored
With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early. Fixes: 033ddf12 ("tee: add register user memory") Cc: stable@vger.kernel.org Reported-by:
Nimish Mishra <neelam.nimish@gmail.com> Reported-by:
Anirban Chakraborty <ch.anirban00727@gmail.com> Reported-by:
Debdeep Mukhopadhyay <debdeep.mukhopadhyay@gmail.com> Suggested-by:
Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lorenzo Bianconi authored
Fix possible NULL pointer dereference in mtk_xdp_run() if the ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails returning NULL. Fixes: 5886d26f ("net: ethernet: mtk_eth_soc: add xmit XDP support") Signed-off-by:
-
Leon Romanovsky authored
IPsec code relies on valid priv->fs pointer that is the case in NIC flow, but not correct in uplink. Before commit that mentioned in the Fixes line, that pointer was valid in all flows as it was allocated together with priv struct. In addition, the cleanup representors routine called to that not-initialized priv->fs pointer and its internals which caused NULL deference. So, move FS allocation to be as early as possible. Fixes: af8bbf73 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.comSigned-off-by:
-
