In prevous SoC, the sub common id occupy 2 bits. the mt8195's sub common
id has 3bits. Add a new flag for this. and rename the previous flag to
_2BITS. For readable, I put these two flags together, then move the
other flags. no functional change.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-16-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Currently the output PA[32:33] is contained by the flag IOVA_34.
This is not right. the iova_34 has no relation with pa[32:33], the 32bits
iova still could map to pa[32:33]. Move it out from the flag.

No need fix tag since currently only mt8192 use the calulation and it
always has this IOVA_34 flag.

Prepare for the IOMMU that still use IOVA 32bits but its dram size may be
over 4GB.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-15-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

The MediaTek IOMMU doesn't care about granule when tlb flushing.
Remove this variable.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-14-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add a new flag STD_AXI_MODE which is prepared for infra and apu iommu
which use the standard axi mode. All the current SoC don't use this flag.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-13-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

In the infra iommu, we should disable DCM. add a new flag for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-12-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

In mt8192, we preassign 0-4G; 4G-8G; 8G-12G for different multimedia
engines. This depends on the "dma-ranges=" in the iommu consumer's dtsi
node.

Adds 12G-16G region here. and reword the previous comment. we don't limit
which master locate in which region.

CCU still is 8G-12G. Don't change it here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-11-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

In previous mt2712, Both IOMMUs are MM IOMMU, and they will share pgtable.
However in the latest SoC, another is infra IOMMU, there is no reason to
share pgtable between MM with INFRA IOMMU. This patch manage to
implement the two case(sharing and non-sharing pgtable).

Currently we use for_each_m4u to loop the 2 HWs. Add the list_head into
this macro.
In the sharing pgtable case, the list_head is the global "m4ulist".
In the non-sharing pgtable case, the list_head is hw_list_head which is a
variable in the "data". then for_each_m4u will only loop itself.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-10-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Same with the previous patch, add a mutex for the "data" in the
mtk_iommu_domain. Just improve the safety for multi devices
enter attach_device at the same time. We don't get the real issue
for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-9-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add a mutex to protect the data in the structure mtk_iommu_data,
like ->"m4u_group" ->"m4u_dom". For the internal data, we should
protect it in ourselves driver. Add a mutex for this.
This could be a fix for the multi-groups support.

Fixes: c3045f39 ("iommu/mediatek: Support for multi domains")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-8-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

After the commit b34ea31f ("iommu/mediatek: Always enable the clk on
resume"), the iommu clock is controlled by the runtime callback.
thus remove the clk control in the mtk_iommu_remove.

Otherwise, it will warning like:

echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind

[   51.413044] ------------[ cut here ]------------
[   51.413648] vpp0_smi_iommu already disabled
[   51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/
                          drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8
[   51.417174] Hardware name: MT8195V/C(ENG) (DT)
[   51.418635] pc : clk_core_disable+0xb0/0xb8
[   51.419177] lr : clk_core_disable+0xb0/0xb8
...
[   51.429375] Call trace:
[   51.429694]  clk_core_disable+0xb0/0xb8
[   51.430193]  clk_core_disable_lock+0x24/0x40
[   51.430745]  clk_disable+0x20/0x30
[   51.431189]  mtk_iommu_remove+0x58/0x118
[   51.431705]  platform_remove+0x28/0x60
[   51.432197]  device_release_driver_internal+0x110/0x1f0
[   51.432873]  device_driver_detach+0x18/0x28
[   51.433418]  unbind_store+0xd4/0x108
[   51.433886]  drv_attr_store+0x24/0x38
[   51.434363]  sysfs_kf_write+0x40/0x58
[   51.434843]  kernfs_fop_write_iter+0x164/0x1e0

Fixes: b34ea31f ("iommu/mediatek: Always enable the clk on resume")
Reported-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-7-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Lack the list_del in the mtk_iommu_remove, and remove
bus_set_iommu(*, NULL) since there may be several iommu HWs.
we can not bus_set_iommu null when one iommu driver unbind.

This could be a fix for mt2712 which support 2 M4U HW and list them.

Fixes: 7c3a2ec0 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

In the commit 4f956c97 ("iommu/mediatek: Move domain_finalise into
attach_device"), I overlooked the sharing pgtable case.
After that commit, the "data" in the mtk_iommu_domain_finalise always is
the data of the current IOMMU HW. Fix this for the sharing pgtable case.

Only affect mt2712 which is the only SoC that share pgtable currently.

Fixes: 4f956c97 ("iommu/mediatek: Move domain_finalise into attach_device")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-5-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Add mt8186 iommu binding. "-mm" means the iommu is for Multimedia.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220503071427.2285-4-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

In mt8195, we have a new IOMMU that is for INFRA IOMMU. its masters
mainly are PCIe and USB. Different with MM IOMMU, all these masters
connect with IOMMU directly, there is no mediatek,larbs property for
infra IOMMU.

Another thing is about PCIe ports. currently the function
"of_iommu_configure_dev_id" only support the id number is 1, But our
PCIe have two ports, one is for reading and the other is for writing.
see more about the PCIe patch in this patchset. Thus, I only list
the reading id here and add the other id in our driver.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-3-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

This patch adds descriptions for mt8195 IOMMU which also use ARM
Short-Descriptor translation table format.

In mt8195, there are two smi-common HW and IOMMU, one is for vdo(video
output), the other is for vpp(video processing pipe). They connects
with different smi-larbs, then some setting(larbid_remap) is different.
Differentiate them with the compatible string.

Something like this:

    IOMMU(VDO)          IOMMU(VPP)
       |                   |
  SMI_COMMON_VDO      SMI_COMMON_VPP
  ---------------     ----------------
  |      |   ...      |      |     ...
larb0 larb2  ...    larb1 larb3    ...

Another change is that we have a new IOMMU that is for infra master like
PCIe and USB. The infra master don't have the larb and ports, thus we
rename the port header file to mt8195-memory-port.h rather than
mt8195-larb-port.h.

Also, the IOMMU is not only for MM, thus, we don't call it "m4u" which
means "MultiMedia Memory Management UNIT". thus, use the "iommu" as the
compatiable string.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-2-yong.wu@mediatek.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case when calculating sched runqueue variables

That fix also removes a check for a zero divisor in the code, without
mentioning it.  Vincent clarified that it's ok after I whined about it:

  https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/

* tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/pelt: Fix attach_entity_load_avg() corner case

Pull powerpc fixes from Michael Ellerman:

 - Partly revert a change to our timer_interrupt() that caused lockups
   with high res timers disabled.

 - Fix a bug in KVM TCE handling that could corrupt kernel memory.

 - Two commits fixing Power9/Power10 perf alternative event selection.

Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.

* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf: Fix 32bit compile
  powerpc/perf: Fix power10 event alternatives
  powerpc/perf: Fix power9 event alternatives
  KVM: PPC: Fix TCE handling for VFIO
  powerpc/time: Always set decrementer in timer_interrupt()

Pull perf fixes from Borislav Petkov:

 - Add Sapphire Rapids CPU support

 - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use)

* tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support
  perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled

Pull EDAC fix from Borislav Petkov:

 - Read the reported error count from the proper register on
   synopsys_edac

* tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Read the error count from the correct register

Since commit 559089e0 ("vmalloc: replace VM_NO_HUGE_VMAP with
VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an
opt-in strategy, because it caused a number of problems that weren't
noticed until x86 enabled it too.

One of the issues was fixed by Nick Piggin in commit 3b8000ae
("mm/vmalloc: huge vmalloc backing pages should be split rather than
compound"), but I'm still worried about page protection issues, and
VM_FLUSH_RESET_PERMS in particular.

However, like the hash table allocation case (commit f2edd118:
"page_alloc: use vmalloc_huge for large system hash"), the use of
kvmalloc() should be safe from any such games, since the returned
pointer might be a SLUB allocation, and as such no user should
reasonably be using it in any odd ways.

We also know that the allocations are fairly large, since it falls back
to the vmalloc case only when a kmalloc() fails.  So using a hugepage
mapping seems both safe and relevant.

This patch does show a weakness in the opt-in strategy: since the opt-in
flag is in the 'vm_flags', not the usual gfp_t allocation flags, very
few of the usual interfaces actually expose it.

That's not much of an issue in this case that already used one of the
fairly specialized low-level vmalloc interfaces for the allocation, but
for a lot of other vmalloc() users that might want to opt in, it's going
to be very inconvenient.

We'll either have to fix any compatibility problems, or expose it in the
gfp flags (__GFP_COMP would have made a lot of sense) to allow normal
vmalloc() users to use hugepage mappings.  That said, the cases that
really matter were probably already taken care of by the hash tabel
allocation.

Link: https://lore.kernel.org/all/20220415164413.2727220-1-song@kernel.org/
Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use vmalloc_huge() in alloc_large_system_hash() so that large system
hash (>= PMD_SIZE) could benefit from huge pages.

Note that vmalloc_huge only allocates huge pages for systems with
HAVE_ARCH_HUGE_VMALLOC.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:

 - cap maximum sector size reported to avoid mount problems

 - reference count fix

 - fix filename rename race

* tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
  ksmbd: increment reference count of parent fp
  ksmbd: remove filename in ksmbd_file

Pull ARC fixes from Vineet Gupta:

 - Assorted fixes

* tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: remove redundant READ_ONCE() in cmpxchg loop
  ARC: atomic: cleanup atomic-llsc definitions
  arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely
  ARC: dts: align SPI NOR node name with dtschema
  ARC: Remove a redundant memset()
  ARC: fix typos in comments
  ARC: entry: fix syscall_trace_exit argument

Pull SCSI fix from James Bottomley:
 "One fix for an information leak caused by copying a buffer to
  userspace without checking for error first in the sr driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sr: Do not leak information in ioctl

Pull xen fixes from Juergen Gross:
 "A simple cleanup patch and a refcount fix for Xen on Arm"

* tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: Fix some refcount leaks
  xen: Convert kmap() to kmap_local_page()

Pull more drm fixes from Dave Airlie:
 "Maarten was away, so Maxine stepped up and sent me the drm-fixes
  merge, so no point leaving it for another week.

  The big change is an OF revert around bridge/panels, it may have some
  driver fallout, but hopefully this revert gets them shook out in the
  next week easier.

  Otherwise it's a bunch of locking/refcounts across drivers, a radeon
  dma_resv logic fix and some raspberry pi panel fixes.

  panel:
   - revert of patch that broke panel/bridge issues

  dma-buf:
   - remove unused header file.

  amdgpu:
   - partial revert of locking change

  radeon:
   - fix dma_resv logic inversion

  panel:
   - pi touchscreen panel init fixes

  vc4:
   - build fix
   - runtime pm refcount fix

  vmwgfx:
   - refcounting fix"

* tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: partial revert "remove ctx->lock" v2
  Revert "drm: of: Lookup if child node has panel or bridge"
  Revert "drm: of: Properly try all possible cases for bridge/panel detection"
  drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
  drm/vmwgfx: Fix gem refcounting and memory evictions
  drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m
  drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
  drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
  dma-buf-map: remove renamed header file
  drm/radeon: fix logic inversion in radeon_sync_resv

Pull input fixes from Dmitry Torokhov:

 - a new set of keycodes to be used by marine navigation systems

 - minor fixes to omap4-keypad and cypress-sf drivers

* tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add Marine Navigation Keycodes
  Input: omap4-keypad - fix pm_runtime_get_sync() error checking
  Input: cypress-sf - register a callback to disable the regulators

Pull block fixes from Jens Axboe:
 "Just two small regression fixes for bcache"

* tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook()
  bcache: put bch_bio_map() back to correct location in journal_write_unlocked()

Pull io_uring fixes from Jens Axboe:
 "Just two small fixes - one fixing a potential leak for the iovec for
  larger requests added in this cycle, and one fixing a theoretical leak
  with CQE_SKIP and IOPOLL"

* tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block:
  io_uring: fix leaks on IOPOLL and CQE_SKIP
  io_uring: free iovec if file assignment fails

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix header include for LLVM >= 14 when building with libclang.

 - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE
   perf.data files, fixing processing data with such attributes.

 - Fix error message for test case 71 ("Convert perf time to TSC") on
   s390, where it is not supported.

* tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Fix error message for test case 71 on s390, where it is not supported
  perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event
  perf script: Always allow field 'data_src' for auxtrace
  perf clang: Fix header include for LLVM >= 14

Add a struct page forward declaration to cacheflush_32.h.
Fixes this build warning:

    CC      drivers/crypto/xilinx/zynqmp-sha.o
  In file included from arch/sparc/include/asm/cacheflush.h:11,
                   from include/linux/cacheflush.h:5,
                   from drivers/crypto/xilinx/zynqmp-sha.c:6:
  arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
     38 | void sparc_flush_page_to_ram(struct page *page);

Exposed by commit 0e03b8fd ("crypto: xilinx - Turn SHA into a
tristate and allow COMPILE_TEST") but not Fixes: that commit because the
underlying problem is older.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: sparclinux@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Two fixes for the raspberrypi panel initialisation, one fix for a logic
inversion in radeon, a build and pm refcounting fix for vc4, two reverts
for drm_of_get_bridge that caused a number of regression and a locking
regression for amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat

Pull ext4 fixes from Ted Ts'o:
 "Fix some syzbot-detected bugs, as well as other bugs found by I/O
  injection testing.

  Change ext4's fallocate to consistently drop set[ug]id bits when an
  fallocate operation might possibly change the user-visible contents of
  a file.

  Also, improve handling of potentially invalid values in the the
  s_overhead_cluster superblock field to avoid ext4 returning a negative
  number of free blocks"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix a potential race while discarding reserved buffers after an abort
  ext4: update the cached overhead value in the superblock
  ext4: force overhead calculation if the s_overhead_cluster makes no sense
  ext4: fix overhead calculation to account for the reserved gdt blocks
  ext4, doc: fix incorrect h_reserved size
  ext4: limit length to bitmap_maxbytes - blocksize in punch_hole
  ext4: fix use-after-free in ext4_search_dir
  ext4: fix bug_on in start_this_handle during umount filesystem
  ext4: fix symlink file size not match to file content
  ext4: fix fallocate to use file_modified to update permissions consistently

Pull ATA fix from Damien Le Moal:
 "A single fix to avoid a NULL pointer dereference in the pata_marvell
  driver with adapters not supporting DMA, from Zheyu"

* tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_marvell: Check the 'bmdma_addr' beforing reading

Pull kvm fixes from Paolo Bonzini:
 "The main and larger change here is a workaround for AMD's lack of
  cache coherency for encrypted-memory guests.

  I have another patch pending, but it's waiting for review from the
  architecture maintainers.

  RISC-V:

   - Remove 's' & 'u' as valid ISA extension

   - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

  x86:

   - Fix NMI watchdog in guests on AMD

   - Fix for SEV cache incoherency issues

   - Don't re-acquire SRCU lock in complete_emulated_io()

   - Avoid NULL pointer deref if VM creation fails

   - Fix race conditions between APICv disabling and vCPU creation

   - Bugfixes for disabling of APICv

   - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

  selftests:

   - Do not use bitfields larger than 32-bits, they differ between GCC
     and clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: selftests: introduce and use more page size-related constants
  kvm: selftests: do not use bitfields larger than 32-bits for PTEs
  KVM: SEV: add cache flush to solve SEV cache incoherency issues
  KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
  KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
  KVM: selftests: Silence compiler warning in the kvm_page_table_test
  KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
  x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
  KVM: SPDX style and spelling fixes
  KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
  KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
  KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
  KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
  KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
  KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
  KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
  KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
  RISC-V: KVM: Restrict the extensions that can be disabled
  RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

Test case 71 'Convert perf time to TSC' is not supported on s390.

Subtest 71.1 is skipped with the correct message, but subtest 71.2 is
not skipped and fails.

The root cause is function evlist__open() called from
test__perf_time_to_tsc().  evlist__open() returns -ENOENT because the
event cycles:u is not supported by the selected PMU, for example
platform s390 on z/VM or an x86_64 virtual machine.

The PMU driver returns -ENOENT in this case. This error is leads to the
failure.

Fix this by returning TEST_SKIP on -ENOENT.

Output before:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        FAILED!

Output after:
 71: Convert perf time to TSC:
 71.1: TSC support:             Skip (This architecture does not support)
 71.2: Perf time to TSC:        Skip (perf_read_tsc_conversion is not supported)

This also happens on an x86_64 virtual machine:
   # uname -m
   x86_64
   $ ./perf test -F 71
    71: Convert perf time to TSC  :
    71.1: TSC support             : Ok
    71.2: Perf time to TSC        : FAILED!
   $

Committer testing:

Continues to work on x86_64:

  $ perf test 71
   71: Convert perf time to TSC    :
   71.1: TSC support               : Ok
   71.2: Perf time to TSC          : Ok
  $

Fixes: 290fa68b ("perf test tsc: Fix error message when not supported")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chengdong Li <chengdongli@tencent.com>
Cc: chengdongli@tencent.com
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220420062921.1211825-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since commit bb30acae ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.

The commit ffab4870 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue.  It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.

On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data.  This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.

Fixes: bb30acae ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If use command 'perf script -F,+data_src' to dump memory samples with
Arm SPE trace data, it reports error:

  # perf script -F,+data_src
  Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field.

This is because the 'dummy:u' event is absent DATA_SRC bit in its sample
type, so if a file contains AUX area tracing data then always allow
field 'data_src' to be selected as an option for perf script.

Fixes: e55ed342 ("perf arm-spe: Synthesize memory event")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The header TargetRegistry.h has moved in LLVM/clang 14.

Committer notes:

The problem as noticed when building in ubuntu:22.04:

    90    98.61 ubuntu:22.04                  : FAIL gcc version 11.2.0 (Ubuntu 11.2.0-19ubuntu1)
      util/c++/clang.cpp:23:10: fatal error: llvm/Support/TargetRegistry.h: No such file or directory
         23 | #include "llvm/Support/TargetRegistry.h"
            |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      compilation terminated.

Fixed after applying this patch.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://twitter.com/GuilhermeAmadio/status/1514970524232921088
Link: http://lore.kernel.org/lkml/Ylp0M/VYgHOxtcnF@gentoo.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>