Introduce the basic infrastructure to have a core wide rq->lock.

This relies on the rq->__lock order being in increasing CPU number
(inside a core). It is also constrained to SMT8 per lockdep (and
SMT256 per preempt_count).

Luckily SMT8 is the max supported SMT count for Linux (Mips, Sparc and
Power are known to have this).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/YJUNfzSgptjX7tG6@hirez.programming.kicks-ass.net

When switching on core-sched, CPUs need to agree which lock to use for
their RQ.

The new rule will be that rq->core_enabled will be toggled while
holding all rq->__locks that belong to a core. This means we need to
double check the rq->core_enabled value after each lock acquire and
retry if it changed.

This also has implications for those sites that take multiple RQ
locks, they need to be careful that the second lock doesn't end up
being the first lock.

Verify the lock pointer after acquiring the first lock, because if
they're on the same core, holding any of the rq->__lock instances will
pin the core state.

While there, change the rq->__lock order to CPU number, instead of rq
address, this greatly simplifies the next patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/YJUNY0dmrJMD/BIm@hirez.programming.kicks-ass.net

In preparation of playing games with rq->lock, abstract the thing
using an accessor.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.136465446@infradead.org

In prepration for playing games with rq->lock, add some rq_lock
wrappers.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.075967879@infradead.org

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Don Hiatt <dhiatt@digitalocean.com>
Tested-by: Hongyu Ning <hongyu.ning@linux.intel.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210422123308.015639083@infradead.org

Just like sched_schedstats, allow runtime enabling (and disabling) of
delayacct. This is useful if one forgot to add the delayacct boot time
option.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YJkhebGJAywaZowX@hirez.programming.kicks-ass.net

Assuming this stuff isn't actually used much; disable it by default
and avoid allocating and tracking the task_delay_info structure.

taskstats is changed to still report the regular sched and sched_info
and only skip the missing task_delay_info fields instead of not
reporting anything.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210505111525.308018373@infradead.org

Cheaper when delayacct is disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210505111525.248028369@infradead.org

AFAICT KVM only relies on SCHED_INFO. Nothing uses the p->delays data
that belongs to TASK_DELAY_ACCT.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20210505111525.187225172@infradead.org

The situation around sched_info is somewhat complicated, it is used by
sched_stats and delayacct and, indirectly, kvm.

If SCHEDSTATS=Y (but disabled by default) sched_info_on() is
unconditionally true -- this is the case for all distro kernel configs
I checked.

If for some reason SCHEDSTATS=N, but TASK_DELAY_ACCT=Y, then
sched_info_on() can return false when delayacct is disabled,
presumably because there would be no other users left; except kvm is.

Instead of complicating matters further by accurately accounting
sched_stat and kvm state, simply unconditionally enable when
SCHED_INFO=Y, matching the common distro case.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20210505111525.121458839@infradead.org

For consistency, rename {queued,dequeued} to {enqueue,dequeue}.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20210505111525.061402904@infradead.org

Like all scheduler statistics, use sched_clock() based time.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Link: https://lkml.kernel.org/r/20210505111525.001031466@infradead.org

find_energy_efficient_cpu() (feec()) searches the best energy CPU
to place a task on. To do so, compute_energy() estimates the energy
impact of placing the task on a CPU, based on CPU and task utilization
signals.

Utilization signals can be concurrently updated while evaluating a
performance domain (pd). In some cases, this leads to having a
'negative delta', i.e. placing the task in the pd is seen as an
energy gain. Thus, any further energy comparison is biased.

In case of a 'negative delta', return prev_cpu since:
1. a 'negative delta' happens in less than 0.5% of feec() calls,
   on a Juno with 6 CPUs (4 little, 2 big)
2. it is unlikely to have two consecutive 'negative delta' for
   a task, so if the first call fails, feec() will correctly
   place the task in the next feec() call
3. EAS current behavior tends to select prev_cpu if the task
   doesn't raise the OPP of its current pd. prev_cpu is EAS's
   generic decision
4. prev_cpu should be preferred to returning an error code.
   In the latter case, select_idle_sibling() would do the placement,
   selecting a big (and not energy efficient) CPU. As 3., the task
   would potentially reside on the big CPU for a long time
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-3-Pierre.Gondois@arm.com

find_energy_efficient_cpu() searches the best energy CPU
to place a task on. To do so, the energy of each performance domain
(pd) is computed w/ and w/o the task placed on it.

The energy of a pd w/o the task (base_energy_pd) is computed prior
knowing whether a CPU is available in the pd.

Move the base_energy_pd computation after looping through the CPUs
of a pd and only compute it if at least one CPU is available.
Suggested-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Link: https://lkml.kernel.org/r/20210504090743.9688-2-Pierre.Gondois@arm.com

The try_to_wake_up function has an optimization where it can queue
a task for wakeup on its previous CPU, if the task is still in the
middle of going to sleep inside schedule().

Once schedule() re-enables IRQs, the task will be woken up with an
IPI, and placed back on the runqueue.

If we have such a wakeup pending, there is no need to search other
CPUs for runnable tasks. Just skip (or bail out early from) newidle
balancing, and run the just woken up task.

For a memcache like workload test, this reduces total CPU use by
about 2%, proportionally split between user and system time,
and p99 and p95 application response time by 10% on average.
The schedstats run_delay number shows a similar improvement.
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210422130236.0bb353df@imladris.surriel.com

container_of() can never return NULL - so don't check for it pointlessly.

[ mingo: Twiddled the changelog. ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210510161522.GA32644@redhat.com

In commit:

  9fe1f127 ("sched/fair: Merge select_idle_core/cpu()")

in select_idle_cpu(), we check if an idle core is present in the LLC
of the target CPU via the flag "has_idle_cores". We look for the idle
core in select_idle_cores(). If select_idle_cores() isn't able to find
an idle core/CPU, we need to unset the has_idle_cores flag in the LLC
of the target to prevent other CPUs from going down this route.

However, the current code is unsetting it in the LLC of the current
CPU instead of the target CPU. This patch fixes this issue.

Fixes: 9fe1f127 ("sched/fair: Merge select_idle_core/cpu()")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/1620746169-13996-1-git-send-email-ego@linux.vnet.ibm.com

Pull btrfs fix from David Sterba:
 "Handle transaction start error in btrfs_fileattr_set()

  This is fix for code introduced by the new fileattr merge"

* tag 'for-5.13-rc1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: handle transaction start error in btrfs_fileattr_set

Add error handling in btrfs_fileattr_set in case of an error while
starting a transaction. This fixes btrfs/232 which otherwise used to
fail with below signature on Power.

  btrfs/232 [ 1119.474650] run fstests btrfs/232 at 2021-04-21 02:21:22
  <...>
  [ 1366.638585] BUG: Unable to handle kernel data access on read at 0xffffffffffffff86
  [ 1366.638768] Faulting instruction address: 0xc0000000009a5c88
  cpu 0x0: Vector: 380 (Data SLB Access) at [c000000014f177b0]
      pc: c0000000009a5c88: btrfs_update_root_times+0x58/0xc0
      lr: c0000000009a5c84: btrfs_update_root_times+0x54/0xc0
      <...>
      pid   = 24881, comm = fsstress
	   btrfs_update_inode+0xa0/0x140
	   btrfs_fileattr_set+0x5d0/0x6f0
	   vfs_fileattr_set+0x2a8/0x390
	   do_vfs_ioctl+0x1290/0x1ac0
	   sys_ioctl+0x6c/0x120
	   system_call_exception+0x3d4/0x410
	   system_call_common+0xec/0x278

Fixes: 97fc2977 ("btrfs: convert to fileattr")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Merge tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix swapping of cpu_map and stat_config records.

 - Fix dynamic libbpf linking.

 - Disallow -c and -F option at the same time in 'perf record'.

 - Update headers with the kernel originals.

 - Silence warning for JSON ArchStd files.

 - Fix a build error on arm64 with clang.

* tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Sync perf_event.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools include UAPI powerpc: Sync errno.h with the kernel headers
  tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers UAPI: Sync files changed by landlock, quotactl_path and mount_settattr new syscalls
  perf tools: Fix a build error on arm64 with clang
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf tools: Fix dynamic libbpf link
  perf session: Fix swapping of cpu_map and stat_config records
  perf jevents: Silence warning for ArchStd files
  perf record: Disallow -c and -F option at the same time
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Update tools's copy of drm.h headers

Pull btrfs fixes from David Sterba:
 "First batch of various fixes, here's a list of notable ones:

   - fix unmountable seed device after fstrim

   - fix silent data loss in zoned mode due to ordered extent splitting

   - fix race leading to unpersisted data and metadata on fsync

   - fix deadlock when cloning inline extents and using qgroups"

* tag 'for-5.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: initialize return variable in cleanup_free_space_cache_v1
  btrfs: zoned: sanity check zone type
  btrfs: fix unmountable seed device after fstrim
  btrfs: fix deadlock when cloning inline extents and using qgroups
  btrfs: fix race leading to unpersisted data and metadata on fsync
  btrfs: do not consider send context as valid when trying to flush qgroups
  btrfs: zoned: fix silent data loss after failure splitting ordered extent

Pull kvm fixes from Paolo Bonzini:

 - Lots of bug fixes.

 - Fix virtualization of RDPID

 - Virtualization of DR6_BUS_LOCK, which on bare metal is new to this
   release

 - More nested virtualization migration fixes (nSVM and eVMCS)

 - Fix for KVM guest hibernation

 - Fix for warning in SEV-ES SRCU usage

 - Block KVM from loading on AMD machines with 5-level page tables, due
   to the APM not mentioning how host CR4.LA57 exactly impacts the
   guest.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (48 commits)
  KVM: SVM: Move GHCB unmapping to fix RCU warning
  KVM: SVM: Invert user pointer casting in SEV {en,de}crypt helpers
  kvm: Cap halt polling at kvm->max_halt_poll_ns
  tools/kvm_stat: Fix documentation typo
  KVM: x86: Prevent deadlock against tk_core.seq
  KVM: x86: Cancel pvclock_gtod_work on module removal
  KVM: x86: Prevent KVM SVM from loading on kernels with 5-level paging
  KVM: X86: Expose bus lock debug exception to guest
  KVM: X86: Add support for the emulation of DR6_BUS_LOCK bit
  KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
  KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed
  KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model
  KVM: x86: Move uret MSR slot management to common x86
  KVM: x86: Export the number of uret MSRs to vendor modules
  KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way
  KVM: VMX: Use common x86's uret MSR list as the one true list
  KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list
  KVM: VMX: Configure list of user return MSRs at module init
  KVM: x86: Add support for RDPID without RDTSCP
  KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host
  ...

To pick up the changes in:

  2b26f0aa ("perf: Support only inheriting events if cloned with CLONE_THREAD")
  2e498d0a ("perf: Add support for event removal on exec")
  547b6098 ("perf: aux: Add flags for the buffer format")
  55bcf6ef ("perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE")
  7dde5176 ("perf: aux: Add CoreSight PMU buffer formats")
  97ba62b2 ("perf: Add support for SIGTRAP on perf events")
  d0d1dd62 ("perf core: Add PERF_COUNT_SW_CGROUP_SWITCHES event")

Also change the expected sizeof(struct perf_event_attr) from 120 to 128 due to
fields being added for the SIGTRAP changes.

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
  diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  4e629211 ("x86/paravirt: Add new features for paravirt patching")
  a161545a ("x86/cpufeatures: Enumerate Intel Hybrid Technology feature bit")
  a89dfde3 ("x86: Remove dynamic NOP selection")
  b8921dcc ("x86/cpufeatures: Add SGX1 and SGX2 sub-features")
  f21d4d3b ("x86/cpufeatures: Enumerate #DB for bus lock detection")
  f333374e ("x86/cpufeatures: Add the Virtual SPEC_CTRL feature")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the change in:

  7de21e67 ("powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h")

That will make the errno number -> string tables to pick this change on powerpc.

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/errno.h' differs from latest version at 'arch/powerpc/include/uapi/asm/errno.h'
  diff -u tools/arch/powerpc/include/uapi/asm/errno.h arch/powerpc/include/uapi/asm/errno.h

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To bring in the change made in this cset:

 5e21a3ec ("x86/alternative: Merge include files")

This just silences these perf tools build warnings, no change in the tools:

  Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
  diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
  Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
  diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S

Cc: Borislav Petkov <bp@suse.de>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick a new prctl introduced in:

  20169862 ("arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)")

That results in

  $ grep prctl tools/perf/trace/beauty/*.sh
  tools/perf/trace/beauty/prctl_option.sh:printf "static const char *prctl_options[] = {\n"
  tools/perf/trace/beauty/prctl_option.sh:egrep $regex ${header_dir}/prctl.h | grep -v PR_SET_PTRACER | \
  tools/perf/trace/beauty/prctl_option.sh:printf "static const char *prctl_set_mm_options[] = {\n"
  tools/perf/trace/beauty/prctl_option.sh:egrep $regex ${header_dir}/prctl.h | \
  tools/perf/trace/beauty/x86_arch_prctl.sh:prctl_arch_header=${x86_header_dir}/prctl.h
  tools/perf/trace/beauty/x86_arch_prctl.sh:	printf "#define x86_arch_prctl_codes_%d_offset %s\n" $idx $first_entry
  tools/perf/trace/beauty/x86_arch_prctl.sh:	printf "static const char *x86_arch_prctl_codes_%d[] = {\n" $idx
  tools/perf/trace/beauty/x86_arch_prctl.sh:	egrep -q $regex ${prctl_arch_header} && \
  tools/perf/trace/beauty/x86_arch_prctl.sh:	(egrep $regex ${prctl_arch_header} | \
  $ tools/perf/trace/beauty/prctl_option.sh > before
  $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
  $ tools/perf/trace/beauty/prctl_option.sh > after
  $ diff -u before after
  --- before	2021-05-09 10:06:10.064559675 -0300
  +++ after	2021-05-09 10:06:21.319791396 -0300
  @@ -54,6 +54,8 @@
   	[57] = "SET_IO_FLUSHER",
   	[58] = "GET_IO_FLUSHER",
   	[59] = "SET_SYSCALL_USER_DISPATCH",
  +	[60] = "PAC_SET_ENABLED_KEYS",
  +	[61] = "PAC_GET_ENABLED_KEYS",
   };
   static const char *prctl_set_mm_options[] = {
   	[1] = "START_CODE",
  $

Now users can do:

  # perf trace -e syscalls:sys_enter_prctl --filter "option==PAC_GET_ENABLED_KEYS"
^C#
  # trace -v -e syscalls:sys_enter_prctl --filter "option==PAC_GET_ENABLED_KEYS"
  New filter for syscalls:sys_enter_prctl: (option==0x3d) && (common_pid != 5519 && common_pid != 3404)
^C#

And also when prctl appears in a session, its options will be
translated to the string.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in these csets:

  a49f4f81 ("arch: Wire up Landlock syscalls")
  2a186721 ("fs: add mount_setattr()")
  fa8b9007 ("quota: wire up quotactl_path")

That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.

For instance, this is now possible:

  # ~acme/bin/perf trace -v -e landlock*
  event qualifier tracepoint filter: (common_pid != 129365 && common_pid != 3502) && (id == 444 || id == 445 || id == 446)
  ^C#

That is tha filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep landlock tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  444	common	landlock_create_ruleset	sys_landlock_create_ruleset
  445	common	landlock_add_rule	sys_landlock_add_rule
  446	common	landlock_restrict_self	sys_landlock_restrict_self
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
  diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: James Morris <jamorris@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mickaël Salaün <mic@linux.microsoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since clang's -Wmissing-field-initializers warns if a data
structure is initialized with a signle NULL as below,

 ----
 tools/perf $ make CC=clang LLVM=1
 ...
 arch/arm64/util/kvm-stat.c:74:9: error: missing field 'ops' initializer [-Werror,-Wmissing-field-initializers]
         { NULL },
                ^
 1 error generated.
 ----

add another field initializer expressly as same as other
arch's kvm-stat.c code.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: http://lore.kernel.org/lkml/162037767540.94840.15758657049033010518.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  3c0c2ad1 ("KVM: VMX: Add basic handling of VM-Exit from SGX enclave")

None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
  diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  15fb7de1 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
  3bf72569 ("KVM: arm64: Add support for the KVM PTP service")
  4cfdd47d ("KVM: SVM: Add KVM_SEV SEND_START command")
  54526d1f ("KVM: x86: Support KVM VMs sharing SEV context")
  5569e2e7 ("KVM: SVM: Add support for KVM_SEV_SEND_CANCEL command")
  8b13c364 ("KVM: introduce KVM_CAP_SET_GUEST_DEBUG2")
  af43cbbf ("KVM: SVM: Add support for KVM_SEV_RECEIVE_START command")
  d3d1af85 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
  fe7e9488 ("KVM: x86: Add capability to grant VM access to privileged SGX attribute")

That don't cause any change in tooling as it doesn't introduce any new
ioctl.

  $ grep kvm tools/perf/trace/beauty/*.sh
  tools/perf/trace/beauty/kvm_ioctl.sh:printf "static const char *kvm_ioctl_cmds[] = {\n"
  tools/perf/trace/beauty/kvm_ioctl.sh:egrep $regex ${header_dir}/kvm.h	| \
  $
  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  $

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Nathan Tempelman <natet@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steve Rutherford <srutherford@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Justin reported broken build with LIBBPF_DYNAMIC=1.

When linking libbpf dynamically we need to use perf's
hashmap object, because it's not exported in libbpf.so
(only in libbpf.a).

Following build is now passing:

  $ make LIBBPF_DYNAMIC=1
    BUILD:   Doing 'make -j8' parallel build
    ...
  $ ldd perf | grep libbpf
        libbpf.so.0 => /lib64/libbpf.so.0 (0x00007fa7630db000)

Fixes: eee19501 ("perf tools: Grab a copy of libbpf's hashmap")
Reported-by: Justin M. Forbes <jforbes@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210508205020.617984-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'data' field in perf_record_cpu_map_data struct is 16-bit
wide and so should be swapped using bswap_16().

'nr' field in perf_record_stat_config struct should be
swapped before being used for size calculation.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210506131244.13328-1-karaghiozis@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

JSON files in the level 1 directory are used for ArchStd events (see
preprocess_arch_std_files), as such they shouldn't be warned about.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210506225640.1461000-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It's confusing which one is effective when the both options are given.
The current code happens to use -c in this case but users might not be
aware of it.  We can change it to complain about that instead of relying
on the implicit priority.

Before:

  $ perf record -c 111111 -F 99 true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.031 MB perf.data (8 samples) ]

  $ perf evlist -F
  cycles: sample_period=111111
  $

After:
  $ perf record -c 111111 -F 99 true
  cannot set frequency and period at the same time
  $

So this change can break existing usages, but I think it's rare to have
both options and it'd be better changing them.
Suggested-by: Alexey Alexandrov <aalexand@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210402094020.28164-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the changes from these csets:

  d0946a88 ("perf/x86/intel: Hybrid PMU support for perf capabilities")

That cause no changes to tooling as it isn't adding any new MSR, just
some capabilities for a pre-existing one:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  $

Just silences this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h

Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  b5b6f6a6 ("drm/i915/gem: Drop legacy execbuffer support (v2)")

That don't result in any change in tooling as this is just adding a
comment.

Only silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Picking the changes from:

  b603e810 ("drm/uapi: document kernel capabilities")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>