- 03 Jul, 2015 5 commits
-
-
Rafał Miłecki authored
[ Upstream commit 90f91b12 ] It seems Broadcom released two devices with conflicting device id. There are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they can be found in routers, e.g. Netgear WNR834Bv2. However, according to Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). It's unsure if they meant PCI device id, or "virtual" id (from SPROM). To distinguish these devices lets check PHY type (G vs. N). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Dmitry Tunin authored
[ Upstream commit 0d0cef61 ] BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Dmitry Tunin authored
[ Upstream commit 692c062e ] BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Christian König authored
[ Upstream commit 48afbd70 ] Otherwise it is possible that we will have page table corruption if we change a BOs address multiple times. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Christian König authored
[ Upstream commit 26d4d129 ] If we unmap BOs before releasing them them the intervall tree locks up because we try to remove an entry not inside the tree. Based on a patch from Michel Dänzer. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 02 Jul, 2015 3 commits
-
-
Michel Dänzer authored
[ Upstream commit 3bc980bf ] This tells userspace that it's safe to use the RADEON_VA_UNMAP operation of the DRM_RADEON_GEM_VA ioctl. Cc: stable@vger.kernel.org (NOTE: Backporting this commit requires at least backports of commits 26d4d129, 48afbd70 and c29c0876 as well, otherwise using RADEON_VA_UNMAP runs into trouble) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Adam Jackson authored
[ Upstream commit 25161084 ] Turns out 1366x768 does not in fact work on this hardware. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Sagi Grimberg authored
[ Upstream commit 9253e667 ] Since commit "2426bd45 target: Report correct response ..." we might get a command with data_size that does not fit to the number of allocated data sg elements. Given that we rely on cmd t_data_nents which might be different than the data_size, we sometimes receive local length error completion. The correct approach would be to take the command data_size into account when constructing the ib sg_list. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Falkovich <jennyf@mellanox.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 01 Jul, 2015 6 commits
-
-
Hui Wang authored
[ Upstream commit 6ab42ff4 ] On a HP Envy TouchSmart laptop, there are 2 speakers (main speaker and subwoofer speaker), 1 headphone and 2 DACs, without this fixup, the headphone will be assigned to a DAC and the 2 speakers will be assigned to another DAC, this assignment makes the surround-2.1 channels invalid. To fix it, here using a DAC/pin preference map to bind the main speaker to 1 DAC and the subwoofer speaker will be assigned to another DAC. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Ferre authored
[ Upstream commit 28df9c2f ] Trivial fix that prevents to compile this pmc clock driver if h32mx clock is present but smd clock isn't. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: bcc5fd49 ("clk: at91: add a driver for the h32mx clock") Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Boris Brezillon authored
[ Upstream commit 6c7b03e1 ] The PLL impose a certain input range to work correctly, but it appears that this input range does not apply on the input clock (or parent clock) but on the input clock after it has passed the PLL divisor. Fix the implementation accordingly. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Steve Cornelius authored
[ Upstream commit 412c98c1 ] The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx) allocated in one DMA-tagged region. While the kernel's heap allocator should place the overall struct on a cacheline aligned boundary, the 2 buffers contained within may not necessarily align. Consenquently, the ends of unaligned buffers may not fully flush, and if so, stale data will be left behind, resulting in small repeating patterns. This fix aligns the buffers inside the struct. Note that not all of the data inside caam_rng_ctx necessarily needs to be DMA-tagged, only the buffers themselves require this. However, a fix would incur the expense of error-handling bloat in the case of allocation failure. Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Steve Cornelius authored
[ Upstream commit 6fd4b156 ] Multiple function in asynchronous hashing use a saved-state block, a.k.a. struct caam_hash_state, which holds a stash of information between requests (init/update/final). Certain values in this state block are loaded for processing using an inline-if, and when this is done, the potential for uninitialized data can pose conflicts. Therefore, this patch improves initialization of state data to prevent false assignments using uninitialized data in the state block. This patch addresses the following traceback, originating in ahash_final_ctx(), although a problem like this could certainly exhibit other symptoms: kernel BUG at arch/arm/mm/dma-mapping.c:465! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01752-gdd441b9-dirty #40) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<80043240>] lr : [<8004323c>] psr: 60000013 sp : e423fd98 ip : 60000013 fp : 0000001c r10: e4191b84 r9 : 00000020 r8 : 00000009 r7 : 88005038 r6 : 00000001 r5 : 2d676572 r4 : e4191a60 r3 : 00000000 r2 : 00000001 r1 : 60000093 r0 : 00000033 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process cryptomgr_test (pid: 1306, stack limit = 0xe423e2f0) Stack: (0xe423fd98 to 0xe4240000) fd80: 11807fd1 80048544 fda0: 88005000 e4191a00 e5178040 8039dda0 00000000 00000014 2d676572 e4191008 fdc0: 88005018 e4191a60 00100100 e4191a00 00000000 8039ce0c e423fea8 00000007 fde0: e4191a00 e4227000 e5178000 8039ce18 e419183c 80203808 80a94a44 00000006 fe00: 00000000 80207180 00000000 00000006 e423ff08 00000000 00000007 e5178000 fe20: e41918a4 80a949b4 8c4844e2 00000000 00000049 74227000 8c4844e2 00000e90 fe40: 0000000e 74227e90 ffff8c58 80ac29e0 e423fed4 8006a350 8c81625c e423ff5c fe60: 00008576 e4002500 00000003 00030010 e4002500 00000003 e5180000 e4002500 fe80: e5178000 800e6d24 007fffff 00000000 00000010 e4001280 e4002500 60000013 fea0: 000000d0 804df078 00000000 00000000 00000000 00000000 00000000 00000000 fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 e4227000 e4226000 e4753000 e4752000 e40a5000 e40a4000 ff00: e41e7000 e41e6000 00000000 00000000 00000000 e423ff14 e423ff14 00000000 ff20: 00000400 804f9080 e5178000 e4db0b40 00000000 e4db0b80 0000047c 00000400 ff40: 00000000 8020758c 00000400 ffffffff 0000008a 00000000 e4db0b40 80206e00 ff60: e4049dbc 00000000 00000000 00000003 e423ffa4 80062978 e41a8bfc 00000000 ff80: 00000000 e4049db4 00000013 e4049db0 00000013 00000000 00000000 00000000 ffa0: e4db0b40 e4db0b40 80204cbc 00000013 00000000 00000000 00000000 80204cfc ffc0: e4049da0 80089544 80040a40 00000000 e4db0b40 00000000 00000000 00000000 ffe0: e423ffe0 e423ffe0 e4049da0 800894c4 80040a40 80040a40 00000000 00000000 [<80043240>] (__bug+0x1c/0x28) from [<80048544>] (___dma_single_dev_to_cpu+0x84) [<80048544>] (___dma_single_dev_to_cpu+0x84/0x94) from [<8039dda0>] (ahash_fina) [<8039dda0>] (ahash_final_ctx+0x180/0x428) from [<8039ce18>] (ahash_final+0xc/0) [<8039ce18>] (ahash_final+0xc/0x10) from [<80203808>] (crypto_ahash_op+0x28/0xc) [<80203808>] (crypto_ahash_op+0x28/0xc0) from [<80207180>] (test_hash+0x214/0x5) [<80207180>] (test_hash+0x214/0x5b8) from [<8020758c>] (alg_test_hash+0x68/0x8c) [<8020758c>] (alg_test_hash+0x68/0x8c) from [<80206e00>] (alg_test+0x7c/0x1b8) [<80206e00>] (alg_test+0x7c/0x1b8) from [<80204cfc>] (cryptomgr_test+0x40/0x48) [<80204cfc>] (cryptomgr_test+0x40/0x48) from [<80089544>] (kthread+0x80/0x88) [<80089544>] (kthread+0x80/0x88) from [<80040a40>] (kernel_thread_exit+0x0/0x8) Code: e59f0010 e1a01003 eb126a8d e3a03000 (e5833000) ---[ end trace d52a403a1d1eaa86 ]--- Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Konstantin Khlebnikov authored
Hash value passed as argument into rhashtable_lookup_compare could be computed using different hash table than rhashtable_lookup_compare sees. This patch passes key into rhashtable_lookup_compare() instead of hash and compures hash value right in place using the same table as for lookup. Also it adds comment for rhashtable_hashfn and rhashtable_obj_hashfn: user must prevent concurrent insert/remove otherwise returned hash value could be invalid. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") Link: http://lkml.kernel.org/r/20150514042151.GA5482@gondor.apana.org.au Cc: Stable <stable@vger.kernel.org> (v3.17 .. v3.19) Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 29 Jun, 2015 2 commits
-
-
Frank Praznik authored
[ Upstream commit 68a49e51 ] Add vid/pid for the SMK branded third-party PS3 Bluetooth remote and enable support in the hid-sony driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Kenneth Graunke authored
[ Upstream commit 94411593 ] Haswell significantly improved the performance of sampler_c messages, but the optimization appears to be off by default. Later platforms remove this bit, and apparently always enable the optimization. Improves performance in "Counter Strike: Global Offensive" by 18% at default settings on Iris Pro. This may break sampling of paletted formats (P8/A8P8/P8A8). It's unclear whether it affects sampling of paletted formats in general, or just the sample_c message (which is never used). While libva does have support for using paletted formats (primarily for OSDs), that support appears to have been broken for at least a year, so I couldn't observe a regression from this: I tried to get libva-intel to use paletted formats, and observe a regression...but the only thing I found that used it was mplayer's OSD (on screen display). Even without my patch, the colors were totally wrong with that, and it's according to a few distro wikis, that's been the case for over a year. If libva's code for paletted formats /is/ broken, they could always add code to disable this bit using the command validator when fixing it. Further investigation from Haihao shows that libva mplayer OSD seems to work at least on his setup (still unclear what's wron with Ken's), and that it's not affected by this patch. Quoting the discussion between Haihao and Ken: > > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black > > > border around it. I presume that it's supposed to be white with vaapi as > > > well, but I guess I'm not entirely sure. > > > > > > It's possible that the optimization doesn't affect the palette as long as > > > you never use sample_c with the paletted textures. > > > > I verified the palette takes effect in the following way: > > > > 1. Only support P8A8 format in the driver > > > > 2. ran the above command and I saw white OSD text > > > > 3. Only support P4A4 format in the driver and don't use > > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette, > > so the palette keeps unchanged. > > > > 4. ran the above command and I saw black OSD text. > > > > 5. Load the right value to the texture palette and ran the above command > > again, I saw white OSD text. > > > > Hence I think sample_c with the paletted textures is used in the driver. > > That sounds like the palette is actually working, then. Great :) > > I doubt that libva would use sample_c - sampling with a shadow comparison? > It looks like it just uses sample and sample+killpix. You are right, libva driver doesn't use sample_c message. > I'm pretty sure the sample_c optimization just uses the palette memory as > storage for some stuff, so it's quite possible it just works if you're > only using sample and sample+killpix. Thanks for the explanation, it makes sense to me. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: Add wa name from Ville's review to the comment and copypaste the explanation why we don't care about libva (already broken) from Ken. Also add conclusion from libva devs that&why this is all fine.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Xiang, Haihao" <haihao.xiang@intel.com> Cc: libva@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 28 Jun, 2015 24 commits
-
-
Sasha Levin authored
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Linus Torvalds authored
[ Upstream commit dd369297 ] The use of READ_ONCE() causes lots of warnings witht he pending paravirt spinlock fixes, because those ends up having passing a member to a 'const' structure to READ_ONCE(). There should certainly be nothing wrong with using READ_ONCE() with a const source, but the helper function __read_once_size() would cause warnings because it would drop the 'const' qualifier, but also because the destination would be marked 'const' too due to the use of 'typeof'. Use a union of types in READ_ONCE() to avoid this issue. Also make sure to use parenthesis around the macro arguments to avoid possible operator precedence issues. Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ben Serebrin authored
[ Upstream commit 085e68ee ] The host's decision to enable machine check exceptions should remain in force during non-root mode. KVM was writing 0 to cr4 on VCPU reset and passed a slightly-modified 0 to the vmcs.guest_cr4 value. Tested: Built. On earlier version, tested by injecting machine check while a guest is spinning. Before the change, if guest CR4.MCE==0, then the machine check is escalated to Catastrophic Error (CATERR) and the machine dies. If guest CR4.MCE==1, then the machine check causes VMEXIT and is handled normally by host Linux. After the change, injecting a machine check causes normal Linux machine check handling. Signed-off-by: Ben Serebrin <serebrin@google.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Andy Lutomirski authored
[ Upstream commit 1e02ce4c ] Context switches and TLB flushes can change individual bits of CR4. CR4 reads take several cycles, so store a shadow copy of CR4 in a per-cpu variable. To avoid wasting a cache line, I added the CR4 shadow to cpu_tlbstate, which is already touched in switch_mm. The heaviest users of the cr4 shadow will be switch_mm and __switch_to_xtra, and __switch_to_xtra is called shortly after switch_mm during context switch, so the cacheline is likely to be hot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/3a54dd3353fffbf84804398e00dfdc5b7c1afd7d.1414190806.git.luto@amacapital.netSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Andy Lutomirski authored
[ Upstream commit 375074cc ] CR4 manipulation was split, seemingly at random, between direct (write_cr4) and using a helper (set/clear_in_cr4). Unfortunately, the set_in_cr4 and clear_in_cr4 helpers also poke at the boot code, which only a small subset of users actually wanted. This patch replaces all cr4 access in functions that don't leave cr4 exactly the way they found it with new helpers cr4_set_bits, cr4_clear_bits, and cr4_set_bits_and_update_boot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/495a10bdc9e67016b8fd3945700d46cfd5c12c2f.1414190806.git.luto@amacapital.netSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Pelle Nilsson authored
[ Upstream commit 7d0ec8b6 ] Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b55 ("spi/bitbang: Drop empty setup() functions") Signed-off-by: Pelle Nilsson <per.nilsson@xelmo.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@vanguardiasur.com.ar> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Arnd Bergmann authored
[ Upstream commit 7d3beab1 ] This driver uses '#ifdef CONFIG_ARCH_SHMOBILE' and '#ifdef CONFIG_ARM' interchangeably in its sh_dmae_probe function, which causes a build warning when building for ARM without also enabling shmobile: dma/sh/shdmac.c: In function sh_dmae_probe: dma/sh/shdmac.c:696:6: warning: unused variable errirq [-Wunused-variable] dma/sh/shdmac.c:695:16: warning: unused variable irqflags [-Wunused-variable] dma/sh/shdmac.c: At top level: dma/sh/shdmac.c:447:20: warning: sh_dmae_err defined but not used [-Wunused-function] This changes all the #ifdef to test for CONFIG_ARCH_SHMOBILE to avoid that warning. An earlier patch from Laurent had fixed the warning for non-ARM case, but it still remained present in ARM randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 52d6a5ee ("DMA: shdma: Fix warnings due to declared but unused symbols") Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric Dumazet authored
[ Upstream commit fad9dfef ] tcp_get_info() can be called without holding socket lock, so any socket fields can change under us. Use READ_ONCE() to fetch sk_pacing_rate and sk_max_pacing_rate Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Roy Franz authored
[ Upstream commit 98b228f5 ] Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz <roy.franz@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ross Lagerwall authored
[ Upstream commit c57dcb56 ] Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Iooss authored
[ Upstream commit d43698e8 ] Commit 2473238e ("ihex: add support for CS:IP/EIP records") removes the "default:" statement in the switch block, making the "return usage();" line dead code and ihex2fw silently ignoring unknown options. Restore this statement. This bug was found by building with HOSTCC=clang and adding -Wunreachable-code-return to HOSTCFLAGS. Fixes: 2473238e ("ihex: add support for CS:IP/EIP records") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Honggang LI authored
[ Upstream commit 59d2d18c ] If CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for x86 systems and physical memory is more than 4GB, dma_map_page may return a valid memory address which greater than 0xffffffff. As a result, the mlx5 device page allocator RB tree will be initialized with valid addresses greater than 0xfffffff. However, (addr & PAGE_MASK) set the high four bytes to zeros. So, it's impossible for the function, free_4k, to release the pages whose addresses greater than 4GB. Memory leaks. And mlx5_ib module can't release the pages when user try to remove the module, as a result, system hang. [root@rdma05 root]# dmesg | grep addr | head addr = 3fe384000 addr & PAGE_MASK = fe384000 [root@rdma05 root]# rmmod mlx5_ib <---- hang on ---------------------- cosnole log ----------------- mlx5_ib 0000:04:00.0: irq 138 for MSI/MSI-X alloc irq_desc for 139 on node -1 alloc kstat_irqs on node -1 mlx5_ib 0000:04:00.0: irq 139 for MSI/MSI-X 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found ---------------------- cosnole log ----------------- Fixes: bf0bf77f ('mlx5: Support communicating arbitrary host page size to firmware') Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit bd2cba07 ] This command is missing. Fixes: 3a2dfbe8 ("xfrm: Notify changes in UDP encapsulation via netlink") CC: Martin Willi <martin@strongswan.org> Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 8d465bb7 ] This command is missing. Fixes: 5c79de6e ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit b0b59b00 ] This command is missing. Fixes: 97a64b45 ("[XFRM]: Introduce XFRM_MSG_REPORT.") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric W. Biederman authored
[ Upstream commit f53e5797 ] lookup_mountpoint can return either NULL or an error value. Update the test in __detach_mounts to test for an error value to avoid pathological cases causing a NULL pointer dereferences. The callers of __detach_mounts should prevent it from ever being called on an unlinked dentry but don't take any chances. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Aravind Gopalakrishnan authored
[ Upstream commit b4491592 ] The comment line regarding IOMMU_INIT and IOMMU_INIT_FINISH macros is incorrect: "The standard vs the _FINISH differs in that the _FINISH variant will continue detecting other IOMMUs in the call list..." It should be "..the *standard* variant will continue detecting..." Fix that. Also, make it readable while at it. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: konrad.wilk@oracle.com Fixes: 6e963669 ("x86, iommu: Update header comments with appropriate naming") Link: http://lkml.kernel.org/r/1428508017-5316-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 5b5800fa ] These commands are missing. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 5e6deeba ] This command is missing. Fixes: ecfd6b18 ("[XFRM]: Export SPD info") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 2b7834d3 ] This new command is missing. Fixes: 880a6fab ("xfrm: configure policy hash table thresholds by netlink") Reported-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Sowmini Varadhan authored
[ Upstream commit ebe96e64 ] AF_RDS, PF_RDS and SOL_RDS are available in header files, and there is no need to get their values from /proc. Document this correctly. Fixes: 0c5f9b88 ("RDS: Documentation") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Arnd Bergmann authored
[ Upstream commit 9b174527 ] In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Felipe Balbi authored
[ Upstream commit 74bd7b69 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Yao Xiwei authored
[ Upstream commit 092a29a4 ] When the kernel deleted a vti6 interface, this interface was not removed from the tunnels list. Thus, when the ip6_vti module was removed, this old interface was found and the kernel tried to delete it again. This was leading to a kernel panic. Fixes: 61220ab3 ("vti6: Enable namespace changing") Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-