1. 01 Jun, 2020 30 commits
    • Ido Schimmel's avatar
      devlink: Add 'mirror' trap action · 9eefeabe
      Ido Schimmel authored
      The action is used by control traps such as IGMP query. The packet is
      flooded by the device, but also trapped to the CPU in order for the
      software bridge to mark the receiving port as a multicast router port.
      Such packets are marked with 'skb->offload_fwd_mark = 1' in order to
      prevent the software bridge from flooding them again.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9eefeabe
    • Ido Schimmel's avatar
      netdevsim: Move layer 3 exceptions to exceptions trap group · 85176f19
      Ido Schimmel authored
      The layer 3 exceptions are still subject to the same trap policer, so
      nothing changes, but user space can choose to assign a different one.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      85176f19
    • Ido Schimmel's avatar
      mlxsw: spectrum_trap: Move layer 3 exceptions to exceptions trap group · 1e292f5c
      Ido Schimmel authored
      The layer 3 exceptions are still subject to the same trap policer, so
      nothing changes, but user space can choose to assign a different one.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e292f5c
    • Ido Schimmel's avatar
      devlink: Create dedicated trap group for layer 3 exceptions · 678eb199
      Ido Schimmel authored
      Packets that hit exceptions during layer 3 forwarding must be trapped to
      the CPU for the control plane to function properly. Create a dedicated
      group for them, so that user space could choose to assign a different
      policer for them.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      678eb199
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next · af0a2482
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter updates for net-next
      
      The following patchset contains Netfilter updates for net-next
      to extend ctnetlink and the flowtable infrastructure:
      
      1) Extend ctnetlink kernel side netlink dump filtering capabilities,
         from Romain Bellan.
      
      2) Generalise the flowtable hook parser to take a hook list.
      
      3) Pass a hook list to the flowtable hook registration/unregistration.
      
      4) Add a helper function to release the flowtable hook list.
      
      5) Update the flowtable event notifier to pass a flowtable hook list.
      
      6) Allow users to add new devices to an existing flowtables.
      
      7) Allow users to remove devices to an existing flowtables.
      
      8) Allow for registering a flowtable with no initial devices.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af0a2482
    • Liu Xiang's avatar
      net: fec: disable correct clk in the err path of fec_enet_clk_enable · a74d19ba
      Liu Xiang authored
      When enable clk_ref failed, clk_ptp should be disabled rather than
      clk_ref itself.
      Signed-off-by: default avatarLiu Xiang <liuxiang_1999@126.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a74d19ba
    • Alexander Sverdlin's avatar
      net: octeon: mgmt: Repair filling of RX ring · 0c34bb59
      Alexander Sverdlin authored
      The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet
      driver. mips_swiotlb_ops had an mb() after most of the operations and the
      removal of the ops had broken the receive functionality of the driver.
      My code inspection has shown no other places except
      octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously
      missing. The latter function however has to make sure that "ringing the
      bell" doesn't happen before RX ring entry is really written.
      
      The patch has been successfully tested on Octeon II.
      
      Fixes: a999933d ("MIPS: remove mips_swiotlb_ops")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarAlexander Sverdlin <alexander.sverdlin@nokia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c34bb59
    • David S. Miller's avatar
      Merge branch 'fix-indirect-flow_block-infrastructure' · 2aec17f1
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      the indirect flow_block infrastructure, revisited
      
      This series fixes b5140a36 ("netfilter: flowtable: add indr block
      setup support") that adds support for the indirect block for the
      flowtable. This patch crashes the kernel with the TC CT action.
      
      [  630.908086] BUG: kernel NULL pointer dereference, address: 00000000000000f0
      [  630.908233] #PF: error_code(0x0000) - not-present page
      [  630.908304] PGD 800000104addd067 P4D 800000104addd067 PUD 104311d067 PMD 0
      [  630.908380] Oops: 0000 [#1] SMP PTI [  630.908615] RIP: 0010:nf_flow_table_indr_block_cb+0xc0/0x190 [nf_flow_table]
      [  630.908690] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 4c 89 75 a0 4c 89 65 a8 4d 89 ee 49 89 dd 4c 89 fe 48 c7 c7 b7 64 36 a0 31 c0 e8 ce ed d8 e0 <49> 8b b7 f0 00 00 00 48 c7 c7 c8 64      36 a0 31 c0 e8 b9 ed d8 e0 49[  630.908790] RSP: 0018:ffffc9000895f8c0 EFLAGS: 00010246
      [...]
      [  630.910774] Call Trace:
      [  630.911192]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
      [  630.911621]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
      [  630.912040]  ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
      [  630.912443]  flow_block_cmd+0x51/0x80
      [  630.912844]  __flow_indr_block_cb_register+0x26c/0x510
      [  630.913265]  mlx5e_nic_rep_netdevice_event+0x9e/0x110 [mlx5_core]
      [  630.913665]  notifier_call_chain+0x53/0xa0
      [  630.914063]  raw_notifier_call_chain+0x16/0x20
      [  630.914466]  call_netdevice_notifiers_info+0x39/0x90
      [  630.914859]  register_netdevice+0x484/0x550
      [  630.915256]  __ip_tunnel_create+0x12b/0x1f0 [ip_tunnel]
      [  630.915661]  ip_tunnel_init_net+0x116/0x180 [ip_tunnel]
      [  630.916062]  ipgre_tap_init_net+0x22/0x30 [ip_gre]
      [  630.916458]  ops_init+0x44/0x110
      [  630.916851]  register_pernet_operations+0x112/0x200
      
      A workaround patch to cure this crash has been proposed. However, there
      is another problem: The indirect flow_block still does not work for the
      new TC CT action. The problem is that the existing flow_indr_block_entry
      callback assumes you can look up for the flowtable from the netdevice to
      get the flow_block. This flow_block allows you to offload the flows via
      TC_SETUP_CLSFLOWER. Unfortunately, it is not possible to get the
      flow_block from the TC CT flowtables because they are _not_ bound to any
      specific netdevice.
      
      = What is the indirect flow_block infrastructure?
      
      The indirect flow_block infrastructure allows drivers to offload
      tc/netfilter rules that belong to software tunnel netdevices, e.g.
      vxlan.
      
      This indirect flow_block infrastructure relates tunnel netdevices with
      drivers because there is no obvious way to relate these two things
      from the control plane.
      
      = How does the indirect flow_block work before this patchset?
      
      Front-ends register the indirect block callback through
      flow_indr_add_block_cb() if they support for offloading tunnel
      netdevices.
      
      == Setting up an indirect block
      
      1) Drivers track tunnel netdevices via NETDEV_{REGISTER,UNREGISTER} events.
         If there is a new tunnel netdevice that the driver can offload, then the
         driver invokes __flow_indr_block_cb_register() with the new tunnel
         netdevice and the driver callback. The __flow_indr_block_cb_register()
         call iterates over the list of the front-end callbacks.
      
      2) The front-end callback sets up the flow_block_offload structure and it
         invokes the driver callback to set up the flow_block.
      
      3) The driver callback now registers the flow_block structure and it
         returns the flow_block back to the front-end.
      
      4) The front-end gets the flow_block object and it is now ready to
         offload rules for this tunnel netdevice.
      
      A simplified callgraph is represented below.
      
              Front-end                      Driver
      
                                         NETDEV_REGISTER
                                               |
                           __flow_indr_block_cb_register(netdev, cb_priv, driver_cb)
                                               | [1]
                  .--------------frontend_indr_block_cb(cb_priv, driver_cb)
                  |
                  .
         setup_flow_block_offload(bo)
                  | [2]
             driver_cb(bo, cb_priv) -----------.
                                               |
                                               \/
                                        set up flow_blocks [3]
                                               |
            add rules to flow_block <----------
            TC_SETUP_CLSFLOWER [4]
      
      == Releasing the indirect flow_block
      
      There are two possibilities, either tunnel netdevice is removed or
      a netdevice (port representor) is removed.
      
      === Tunnel netdevice is removed
      
      Driver waits for the NETDEV_UNREGISTER event that announces the tunnel
      netdevice removal. Then, it calls __flow_indr_block_cb_unregister() to
      remove the flow_block and rules.  Callgraph is very similar to the one
      described above.
      
      === Netdevice is removed (port representor)
      
      Driver calls __flow_indr_block_cb_unregister() to remove the existing
      netfilter/tc rule that belong to the tunnel netdevice.
      
      = How does the indirect flow_block work after this patchset?
      
      Drivers register the indirect flow_block setup callback through
      flow_indr_dev_register() if they support for offloading tunnel
      netdevices.
      
      == Setting up an indirect flow_block
      
      1) Frontends check if dev->netdev_ops->ndo_setup_tc is unset. If so,
         frontends call flow_indr_dev_setup_offload(). This call invokes
         the drivers' indirect flow_block setup callback.
      
      2) The indirect flow_block setup callback sets up a flow_block structure
         which relates the tunnel netdevice and the driver.
      
      3) The front-end uses flow_block and offload the rules.
      
      Note that the operational to set up (non-indirect) flow_block is very
      similar.
      
      == Releasing the indirect flow_block
      
      === Tunnel netdevice is removed
      
      This calls flow_indr_dev_setup_offload() to set down the flow_block and
      remove the offloaded rules. This alternate path is exercised if
      dev->netdev_ops->ndo_setup_tc is unset.
      
      === Netdevice is removed (port representor)
      
      If a netdevice is removed, then it might need to to clean up the
      offloaded tc/netfilter rules that belongs to the tunnel netdevice:
      
      1) The driver invokes flow_indr_dev_unregister() when a netdevice is
         removed.
      
      2) This call iterates over the existing indirect flow_blocks
         and it invokes the cleanup callback to let the front-end remove the
         tc/netfilter rules. The cleanup callback already provides the
         flow_block that the front-end needs to clean up.
      
              Front-end                      Driver
      
                                               |
                                  flow_indr_dev_unregister(...)
                                               |
                               iterate over list of indirect flow_block
                                     and invoke cleanup callback
                                               |
                  .-----------------------------
                  |
                  .
         frontend_flow_block_cleanup(flow_block)
                  .
                  |
                 \/
         remove rules to flow_block
            TC_SETUP_CLSFLOWER
      
      = About this patchset
      
      This patchset aims to address the existing TC CT problem while
      simplifying the indirect flow_block infrastructure. Saving 300 LoC in
      the flow_offload core and the drivers. The operational gets aligned with
      the (non-indirect) flow_blocks logic. Patchset is composed of:
      
      Patch #1 add nf_flow_table_gc_cleanup() which is required by the
               netfilter's flowtable new indirect flow_block approach.
      
      Patch #2 adds the flow_block_indr object which is actually part of
               of the flow_block object. This stores the indirect flow_block
               metadata such as the tunnel netdevice owner and the cleanup
               callback (in case the tunnel netdevice goes away).
      
               This patch adds flow_indr_dev_{un}register() to allow drivers
               to offer netdevice tunnel hardware offload to the front-ends.
               Then, front-ends call flow_indr_dev_setup_offload() to invoke
               the drivers to set up the (indirect) flow_block.
      
      Patch #3 add the tcf_block_offload_init() helper function, this is
               a preparation patch to adapt the tc front-end to use this
               new indirect flow_block infrastructure.
      
      Patch #4 updates the tc and netfilter front-ends to use the new
               indirect flow_block infrastructure.
      
      Patch #5 updates the mlx5 driver to use the new indirect flow_block
               infrastructure.
      
      Patch #6 updates the nfp driver to use the new indirect flow_block
               infrastructure.
      
      Patch #7 updates the bnxt driver to use the new indirect flow_block
               infrastructure.
      
      Patch #8 removes the indirect flow_block infrastructure version 1,
               now that frontends and drivers have been translated to
               version 2 (coming in this patchset).
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2aec17f1
    • Pablo Neira Ayuso's avatar
      net: remove indirect block netdev event registration · 709ffbe1
      Pablo Neira Ayuso authored
      Drivers do not register to netdev events to set up indirect blocks
      anymore. Remove __flow_indr_block_cb_register() and
      __flow_indr_block_cb_unregister().
      
      The frontends set up the callbacks through flow_indr_dev_setup_block()
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      709ffbe1
    • Pablo Neira Ayuso's avatar
      bnxt_tc: update indirect block support · e445e30c
      Pablo Neira Ayuso authored
      Register ndo callback via flow_indr_dev_register() and
      flow_indr_dev_unregister().
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e445e30c
    • Pablo Neira Ayuso's avatar
      nfp: update indirect block support · 50c1b1c9
      Pablo Neira Ayuso authored
      Register ndo callback via flow_indr_dev_register() and
      flow_indr_dev_unregister().
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50c1b1c9
    • Pablo Neira Ayuso's avatar
      mlx5: update indirect block support · 9eabd188
      Pablo Neira Ayuso authored
      Register ndo callback via flow_indr_dev_register() and
      flow_indr_dev_unregister().
      
      No need for mlx5e_rep_indr_clean_block_privs() since flow_block_cb_free()
      already releases the internal mapping via ->release callback, which in
      this case is mlx5e_rep_indr_tc_block_unbind().
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9eabd188
    • Pablo Neira Ayuso's avatar
      net: use flow_indr_dev_setup_offload() · 0fdcf78d
      Pablo Neira Ayuso authored
      Update existing frontends to use flow_indr_dev_setup_offload().
      
      This new function must be called if ->ndo_setup_tc is unset to deal
      with tunnel devices.
      
      If there is no driver that is subscribed to new tunnel device
      flow_block bindings, then this function bails out with EOPNOTSUPP.
      
      If the driver module is removed, the ->cleanup() callback removes the
      entries that belong to this tunnel device. This cleanup procedures is
      triggered when the device unregisters the tunnel device offload handler.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0fdcf78d
    • Pablo Neira Ayuso's avatar
      net: cls_api: add tcf_block_offload_init() · 324a823b
      Pablo Neira Ayuso authored
      Add a helper function to initialize the flow_block_offload structure.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      324a823b
    • Pablo Neira Ayuso's avatar
      net: flow_offload: consolidate indirect flow_block infrastructure · 1fac52da
      Pablo Neira Ayuso authored
      Tunnel devices provide no dev->netdev_ops->ndo_setup_tc(...) interface.
      The tunnel device and route control plane does not provide an obvious
      way to relate tunnel and physical devices.
      
      This patch allows drivers to register a tunnel device offload handler
      for the tc and netfilter frontends through flow_indr_dev_register() and
      flow_indr_dev_unregister().
      
      The frontend calls flow_indr_dev_setup_offload() that iterates over the
      list of drivers that are offering tunnel device hardware offload
      support and it sets up the flow block for this tunnel device.
      
      If the driver module is removed, the indirect flow_block ends up with a
      stale callback reference. The module removal path triggers the
      dev_shutdown() path to remove the qdisc and the flow_blocks for the
      physical devices. However, this is not useful for tunnel devices, where
      relation between the physical and the tunnel device is not explicit.
      
      This patch introduces a cleanup callback that is invoked when the driver
      module is removed to clean up the tunnel device flow_block. This patch
      defines struct flow_block_indr and it uses it from flow_block_cb to
      store the information that front-end requires to perform the
      flow_block_cb cleanup on module removal.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1fac52da
    • Pablo Neira Ayuso's avatar
      netfilter: nf_flowtable: expose nf_flow_table_gc_cleanup() · a8284c68
      Pablo Neira Ayuso authored
      This function schedules the flow teardown state and it forces a gc run.
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a8284c68
    • Davide Caratti's avatar
      net/sched: fix a couple of splats in the error path of tfc_gate_init() · a01c2454
      Davide Caratti authored
      trying to configure TC 'act_gate' rules with invalid control actions, the
      following splat can be observed:
      
       general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
       KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
       CPU: 1 PID: 2143 Comm: tc Not tainted 5.7.0-rc6+ #168
       Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
       RIP: 0010:hrtimer_active+0x56/0x290
       [...]
        Call Trace:
        hrtimer_try_to_cancel+0x6d/0x330
        hrtimer_cancel+0x11/0x20
        tcf_gate_cleanup+0x15/0x30 [act_gate]
        tcf_action_cleanup+0x58/0x170
        __tcf_action_put+0xb0/0xe0
        __tcf_idr_release+0x68/0x90
        tcf_gate_init+0x7c7/0x19a0 [act_gate]
        tcf_action_init_1+0x60f/0x960
        tcf_action_init+0x157/0x2a0
        tcf_action_add+0xd9/0x2f0
        tc_ctl_action+0x2a3/0x39d
        rtnetlink_rcv_msg+0x5f3/0x920
        netlink_rcv_skb+0x121/0x350
        netlink_unicast+0x439/0x630
        netlink_sendmsg+0x714/0xbf0
        sock_sendmsg+0xe2/0x110
        ____sys_sendmsg+0x5b4/0x890
        ___sys_sendmsg+0xe9/0x160
        __sys_sendmsg+0xd3/0x170
        do_syscall_64+0x9a/0x370
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
      
      this is caused by hrtimer_cancel(), running before hrtimer_init(). Fix it
      ensuring to call hrtimer_cancel() only if clockid is valid, and the timer
      has been initialized. After fixing this splat, the same error path causes
      another problem:
      
       general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
       KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
       CPU: 1 PID: 980 Comm: tc Not tainted 5.7.0-rc6+ #168
       Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
       RIP: 0010:release_entry_list+0x4a/0x240 [act_gate]
       [...]
       Call Trace:
        tcf_action_cleanup+0x58/0x170
        __tcf_action_put+0xb0/0xe0
        __tcf_idr_release+0x68/0x90
        tcf_gate_init+0x7ab/0x19a0 [act_gate]
        tcf_action_init_1+0x60f/0x960
        tcf_action_init+0x157/0x2a0
        tcf_action_add+0xd9/0x2f0
        tc_ctl_action+0x2a3/0x39d
        rtnetlink_rcv_msg+0x5f3/0x920
        netlink_rcv_skb+0x121/0x350
        netlink_unicast+0x439/0x630
        netlink_sendmsg+0x714/0xbf0
        sock_sendmsg+0xe2/0x110
        ____sys_sendmsg+0x5b4/0x890
        ___sys_sendmsg+0xe9/0x160
        __sys_sendmsg+0xd3/0x170
        do_syscall_64+0x9a/0x370
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
      
      the problem is similar: tcf_action_cleanup() was trying to release a list
      without initializing it first. Ensure that INIT_LIST_HEAD() is called for
      every newly created 'act_gate' action, same as what was done to 'act_ife'
      with commit 44c23d71 ("net/sched: act_ife: initalize ife->metalist
      earlier").
      
      Fixes: a51c328d ("net: qos: introduce a gate control flow action")
      CC: Ivan Vecera <ivecera@redhat.com>
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a01c2454
    • David S. Miller's avatar
      Merge branch 'regmap-simple-bit-helpers' · e8509361
      David S. Miller authored
      Bartosz Golaszewski says:
      
      ====================
      regmap: provide simple bitops and use them in a driver
      
      I noticed that oftentimes I use regmap_update_bits() for simple bit
      setting or clearing. In this case the fourth argument is superfluous as
      it's always 0 or equal to the mask argument.
      
      This series proposes to add simple bit operations for setting, clearing
      and testing specific bits with regmap.
      
      The second patch uses all three in a driver that got recently picked into
      the net-next tree.
      
      The patches obviously target different trees so - if you're ok with
      the change itself - I propose you pick the first one into your regmap
      tree for v5.8 and then I'll resend the second patch to add the first
      user for these macros for v5.9.
      
      v1 -> v2:
      - convert the new macros to static inline functions
      
      v2 -> v3:
      - drop unneeded ternary operator
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8509361
    • Bartosz Golaszewski's avatar
      net: ethernet: mtk-star-emac: use regmap bitops · 240f1ae4
      Bartosz Golaszewski authored
      Shrink the code visually by replacing regmap_update_bits() with
      appropriate regmap bit operations where applicable.
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      240f1ae4
    • Bartosz Golaszewski's avatar
      regmap: provide helpers for simple bit operations · bfad9781
      Bartosz Golaszewski authored
      In many instances regmap_update_bits() is used for simple bit setting
      and clearing. In these cases the last argument is redundant and we can
      hide it with a static inline function.
      
      This adds three new helpers for simple bit operations: set_bits,
      clear_bits and test_bits (the last one defined as a regular function).
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bfad9781
    • Dan Carpenter's avatar
      cxgb4: cleanup error code in setup_sge_queues_uld() · bda6752f
      Dan Carpenter authored
      The caller doesn't care about the error codes, they only check for zero
      vs non-zero.  Still, it's better to preserve the negative error codes
      from alloc_uld_rxqs() instead of changing it to 1.  We can also return
      directly if there is a failure.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bda6752f
    • David S. Miller's avatar
      Merge branch 'Fix-infinite-loop-in-bridge-and-vxlan-modules' · d36ceaef
      David S. Miller authored
      Ido Schimmel says:
      
      ====================
      Fix infinite loop in bridge and vxlan modules
      
      When suppressing invalid IPv6 Neighbour Solicitation messages, it is
      possible for the bridge and vxlan modules to get stuck in an infinite
      loop. See the individual changelogs for detailed explanation of the
      problem and solution.
      
      The bug was originally reported against the bridge module, but after
      auditing the code base I found that the buggy code was copied from the
      vxlan module. This patch set fixes both modules. Could not find more
      instances of the problem.
      
      Please consider both patches for stable releases.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d36ceaef
    • Ido Schimmel's avatar
      vxlan: Avoid infinite loop when suppressing NS messages with invalid options · 8066e6b4
      Ido Schimmel authored
      When proxy mode is enabled the vxlan device might reply to Neighbor
      Solicitation (NS) messages on behalf of remote hosts.
      
      In case the NS message includes the "Source link-layer address" option
      [1], the vxlan device will use the specified address as the link-layer
      destination address in its reply.
      
      To avoid an infinite loop, break out of the options parsing loop when
      encountering an option with length zero and disregard the NS message.
      
      This is consistent with the IPv6 ndisc code and RFC 4886 which states
      that "Nodes MUST silently discard an ND packet that contains an option
      with length zero" [2].
      
      [1] https://tools.ietf.org/html/rfc4861#section-4.3
      [2] https://tools.ietf.org/html/rfc4861#section-4.6
      
      Fixes: 4b29dba9 ("vxlan: fix nonfunctional neigh_reduce()")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8066e6b4
    • Ido Schimmel's avatar
      bridge: Avoid infinite loop when suppressing NS messages with invalid options · 53fc6852
      Ido Schimmel authored
      When neighbor suppression is enabled the bridge device might reply to
      Neighbor Solicitation (NS) messages on behalf of remote hosts.
      
      In case the NS message includes the "Source link-layer address" option
      [1], the bridge device will use the specified address as the link-layer
      destination address in its reply.
      
      To avoid an infinite loop, break out of the options parsing loop when
      encountering an option with length zero and disregard the NS message.
      
      This is consistent with the IPv6 ndisc code and RFC 4886 which states
      that "Nodes MUST silently discard an ND packet that contains an option
      with length zero" [2].
      
      [1] https://tools.ietf.org/html/rfc4861#section-4.3
      [2] https://tools.ietf.org/html/rfc4861#section-4.6
      
      Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Reported-by: default avatarAlla Segal <allas@mellanox.com>
      Tested-by: default avatarAlla Segal <allas@mellanox.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      53fc6852
    • Patrick Eigensatz's avatar
      ipv4: nexthop: Fix deadcode issue by performing a proper NULL check · dafe2078
      Patrick Eigensatz authored
      After allocating the spare nexthop group it should be tested for kzalloc()
      returning NULL, instead the already used nexthop group (which cannot be
      NULL at this point) had been tested so far.
      
      Additionally, if kzalloc() fails, return ERR_PTR(-ENOMEM) instead of NULL.
      
      Coverity-id: 1463885
      Reported-by: default avatarCoverity <scan-admin@coverity.com>
      Signed-off-by: default avatarPatrick Eigensatz <patrickeigensatz@gmail.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dafe2078
    • David S. Miller's avatar
      Merge branch 'for-upstream' of... · 07f6ecec
      David S. Miller authored
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
      
      Johan Hedberg says:
      
      ====================
      pull request: bluetooth-next 2020-06-01
      
      Here's one last bluetooth-next pull request for 5.8, which I hope can
      still be accepted.
      
       - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991
       - Multiple fixes/imprvovements to Qualcomm-based devices
       - Fix GAP/SEC/SEM/BI-10-C qualfication test case
       - Added support for Broadcom BCM4350C5 device
       - Several other smaller fixes & improvements
      
      Please let me know if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07f6ecec
    • Zijun Hu's avatar
      Bluetooth: hci_qca: Fix QCA6390 memdump failure · e5aeebdd
      Zijun Hu authored
      QCA6390 memdump VSE sometimes come to bluetooth driver
      with wrong sequence number as illustrated as follows:
      frame # in dec: frame data in hex
      1396: ff fd 01 08 74 05 00 37 8f 14
      1397: ff fd 01 08 75 05 00 ff bf 38
      1414: ff fd 01 08 86 05 00 fb 5e 4b
      1399: ff fd 01 08 77 05 00 f3 44 0a
      1400: ff fd 01 08 78 05 00 ca f7 41
      it is mistook for controller missing packets, so results
      in page fault after overwriting memdump buffer allocated.
      
      Fixed by ignoring QCA6390 sequence number check and
      checking buffer space before writing.
      Signed-off-by: default avatarZijun Hu <zijuhu@codeaurora.org>
      Tested-by: default avatarZijun Hu <zijuhu@codeaurora.org>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      e5aeebdd
    • Zijun Hu's avatar
      Bluetooth: btmtkuart: Use serdev_device_write_buf() instead of serdev_device_write() · d3a0fe6b
      Zijun Hu authored
      serdev_device_write() is not appropriate at here because
      serdev_device_write_wakeup() is not used to release completion hold
      by the former at @write_wakeup member of struct serdev_device_ops.
      
      Fix by using serdev_device_write_buf() instead of serdev_device_write().
      Signed-off-by: default avatarZijun Hu <zijuhu@codeaurora.org>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      d3a0fe6b
    • Zijun Hu's avatar
      Bluetooth: hci_qca: Improve controller ID info log level · 4942857b
      Zijun Hu authored
      Controller ID info got by VSC EDL_PATCH_GETVER is very
      important, so improve its log level from DEBUG to INFO.
      Signed-off-by: default avatarZijun Hu <zijuhu@codeaurora.org>
      Reviewed-by: default avatarMatthias Kaehlcke <mka@chromium.org>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      4942857b
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 1806c13d
      David S. Miller authored
      xdp_umem.c had overlapping changes between the 64-bit math fix
      for the calculation of npgs and the removal of the zerocopy
      memory type which got rid of the chunk_size_nohdr member.
      
      The mlx5 Kconfig conflict is a case where we just take the
      net-next copy of the Kconfig entry dependency as it takes on
      the ESWITCH dependency by one level of indirection which is
      what the 'net' conflicting change is trying to ensure.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1806c13d
  2. 31 May, 2020 10 commits