- 22 May, 2012 40 commits
-
-
Al Viro authored
Complete the move of sh64 to it, trim the crap from prototypes, tidy up a bit. Infrastructure in do_signal() had already been there, in signal_64 as well as in signal_32 (where it was already used). Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Oleg Nesterov authored
arch/hexagon/kernel/signal.c:do_notify_resume() forgets to call tracehook_notify_resume() if TIF_NOTIFY_RESUME is set. Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Cc: David Howells <dhowells@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Smith <dsmith@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Matt Fleming authored
Use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Oleg Nesterov authored
It is wrong to change ->blocked directly, see e6fa16ab. Change handle_signal() and sys_rt_sigreturn() to use the right helper, set_current_blocked(). Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by:
Havard Skinnemoen <hskinnemoen@gmail.com> Reviewed-by:
-
Matt Fleming authored
The current handle_signal() implementation is broken - it will mask signals if we fail to setup the signal stack frame, which isn't the desired behaviour, we should only be masking signals if we succeed in setting up the stack frame. It looks like this code was copied from the old (broken) arm implementation but wasn't updated when the arm code was fixed in commit a6c61e9d ("[ARM] 3168/1: Update ARM signal delivery and masking"). Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Matt Fleming authored
There are a couple of problems with the current signal code, 1. If we failed to setup the signal stack frame then we should not be masking any signals. 2. ka->sa.sa_mask is only added to the current blocked signals list if SA_NODEFER is set in ka->sa.sa_flags. If we successfully setup the signal frame and are going to run the handler then we must honour sa_mask. Acked-by:
-
Matt Fleming authored
get_signal_to_deliver() already resets the signal handler if SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again in handle_signal(). Furthermore, because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]) instead of sighand->action[] the original code actually had no effect on signal delivery. Acked-by:
-
Matt Fleming authored
Instead of open coding the sequence from force_sigsegv() just call it. This also fixes a bug because we were modifying ka->sa.sa_handler (which is a copy of sighand->action[]), whereas the intention of the code was to modify sighand->action[] directly. As the original code was working with a copy it had no effect on signal delivery. Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
If setup_rt_frame() returns -EFAULT then we must not block any signals in the current process. Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
Use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by:
-
Al Viro authored
guts of saved_sigmask-based sigsuspend/rt_sigsuspend. Takes kernel sigset_t *. Open-coded instances replaced with calling it. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp hotplug cleanups from Thomas Gleixner: "This series is merily a cleanup of code copied around in arch/* and not changing any of the real cpu hotplug horrors yet. I wish I'd had something more substantial for 3.5, but I underestimated the lurking horror..." Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and arch/sparc/include/asm/thread_info_32.h * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) um: Remove leftover declaration of alloc_task_struct_node() task_allocator: Use config switches instead of magic defines sparc: Use common threadinfo allocator score: Use common threadinfo allocator sh-use-common-threadinfo-allocator mn10300: Use common threadinfo allocator powerpc: Use common threadinfo allocator mips: Use common threadinfo allocator hexagon: Use common threadinfo allocator m32r: Use common threadinfo allocator frv: Use common threadinfo allocator cris: Use common threadinfo allocator x86: Use common threadinfo allocator c6x: Use common threadinfo allocator fork: Provide kmemcache based thread_info allocator tile: Use common threadinfo allocator fork: Provide weak arch_release_[task_struct|thread_info] functions fork: Move thread info gfp flags to header fork: Remove the weak insanity sh: Remove cpu_idle_wait() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU changes from Ingo Molnar: "This is the v3.5 RCU tree from Paul E. McKenney: 1) A set of improvements and fixes to the RCU_FAST_NO_HZ feature (with more on the way for 3.6). Posted to LKML: https://lkml.org/lkml/2012/4/23/324 (commits 1-3 and 5), https://lkml.org/lkml/2012/4/16/611 (commit 4), https://lkml.org/lkml/2012/4/30/390 (commit 6), and https://lkml.org/lkml/2012/5/4/410 (commit 7, combined with the other commits for the convenience of the tester). 2) Changes to make rcu_barrier() avoid disrupting execution of CPUs that have no RCU callbacks. Posted to LKML: https://lkml.org/lkml/2012/4/23/322. 3) A couple of commits that improve the efficiency of the interaction between preemptible RCU and the scheduler, these two being all that survived an abortive attempt to allow preemptible RCU's __rcu_read_lock() to be inlined. The full set was posted to LKML at https://lkml.org/lkml/2012/4/14/143, and the first and third patches of that set remain. 4) Lai Jiangshan's algorithmic implementation of SRCU, which includes call_srcu() and srcu_barrier(). A major feature of this new implementation is that synchronize_srcu() no longer disturbs the execution of other CPUs. This work is based on earlier implementations by Peter Zijlstra and Paul E. McKenney. Posted to LKML: https://lkml.org/lkml/2012/2/22/82. 5) A number of miscellaneous bug fixes and improvements which were posted to LKML at: https://lkml.org/lkml/2012/4/23/353 with subsequent updates posted to LKML." * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) rcu: Make rcu_barrier() less disruptive rcu: Explicitly initialize RCU_FAST_NO_HZ per-CPU variables rcu: Make RCU_FAST_NO_HZ handle timer migration rcu: Update RCU maintainership rcu: Make exit_rcu() more precise and consolidate rcu: Move PREEMPT_RCU preemption to switch_to() invocation rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU rcu: Add rcutorture test for call_srcu() rcu: Implement per-domain single-threaded call_srcu() state machine rcu: Use single value to handle expedited SRCU grace periods rcu: Improve srcu_readers_active_idx()'s cache locality rcu: Remove unused srcu_barrier() rcu: Implement a variant of Peter's SRCU algorithm rcu: Improve SRCU's wait_idx() comments rcu: Flip ->completed only once per SRCU grace period rcu: Increment upper bit only for srcu_read_lock() rcu: Remove fast check path from __synchronize_srcu() rcu: Direct algorithmic SRCU implementation rcu: Introduce rcutorture testing for rcu_barrier() timer: Fix mod_timer_pinned() header comment ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core locking updates from Ingo Molnar: "This update: - extends and simplifies x86 NMI callback handling code to enhance and fix the HP hw-watchdog driver - simplifies the x86 NMI callback handling code to fix a kmemcheck bug. - enhances the hung-task debugger" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Fix the type of the nmiaction.flags field x86/nmi: Fix page faults by nmiaction if kmemcheck is enabled x86/nmi: Add new NMI queues to deal with IO_CHK and SERR watchdog, hpwdt: Remove priority option for NMI callback hung task debugging: Inject NMI when hung and going to panic -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull iommu core changes from Ingo Molnar: "The IOMMU changes in this cycle are mostly about factoring out Intel-VT-d specific IRQ remapping details and introducing struct irq_remap_ops, in preparation for AMD specific hardware." * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: iommu: Fix off by one in dmar_get_fault_reason() irq_remap: Fix the 'sub_handle' uninitialized warning irq_remap: Fix UP build failure irq_remap: Fix compiler warning with CONFIG_IRQ_REMAP=y iommu: rename intr_remapping.[ch] to irq_remapping.[ch] iommu: rename intr_remapping references to irq_remapping x86, iommu/vt-d: Clean up interfaces for interrupt remapping iommu/vt-d: Convert MSI remapping setup to remap_ops iommu/vt-d: Convert free_irte into a remap_ops callback iommu/vt-d: Convert IR set_affinity function to remap_ops iommu/vt-d: Convert IR ioapic-setup to use remap_ops iommu/vt-d: Convert missing apic.c intr-remapping call to remap_ops iommu/vt-d: Make intr-remapping initialization generic iommu: Rename intr_remapping files to intel_intr_remapping
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core/debugobjects changes from Ingo Molnar: "Not much happened: it includes a cleanup and an irq latency reduction fixlet." * 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Fill_pool() returns void now debugobjects: printk with irqs enabled debugobjects: Remove unused return value from fill_pool()
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmwLinus Torvalds authored
Pull GFS2 changes from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits) GFS2: Fix quota adjustment return code GFS2: Add rgrp information to block_alloc trace point GFS2: Eliminate unused "new" parameter to gfs2_meta_indirect_buffer GFS2: Update glock doc to add new stats info GFS2: Update main gfs2 doc GFS2: Remove redundant metadata block type check GFS2: Fix sgid propagation when using ACLs GFS2: eliminate log elements and simplify GFS2: Eliminate vestigial sd_log_le_rg GFS2: Eliminate needless parameter from function gfs2_setbit GFS2: Log code fixes GFS2: Remove unused argument from gfs2_internal_read GFS2: Remove bd_list_tr GFS2: Remove duplicate log code GFS2: Clean up log write code path GFS2: Use variable rather than qa to determine if unstuff necessary GFS2: Change variable blk to biblk GFS2: Fix function parameter comments in rgrp.c GFS2: Eliminate offset parameter to gfs2_setbit GFS2: Use slab for block reservation memory ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu tree from Greg Ungerer: "More merge and clean up of MMU and non-MMU common files, namely signal.c and dma.c. There is also a simplification of the ColdFire GPIO setup tables. Using a couple of simple macros we make the init tables really small and easy to read, and save a couple of thousand lines of code. Also a move of all the ColdFire subarch support files into the existing coldfire directory. The sub-directories just ended up duplicating Makefiles and now only contain really simple pieces of code. This saves quite a few lines of code too. As always a couple of bugs fixes thrown in too. Oh and a new defconfig for the ColdFire platforms that support having the MMU enabled." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (39 commits) m68k: add a defconfig for the M5475EVB ColdFire with MMU board m68knommu: unaligned.h fix for M68000 core m68k: merge the MMU and non-MMU versions of the arch dma code m68knommu: reorganize the no-MMU cache flushing to match m68k m68knommu: move the 54xx platform code into the common ColdFire code directory m68knommu: move the 532x platform code into the common ColdFire code directory m68knommu: move the 5407 platform code into the common ColdFire code directory m68knommu: move the 5307 platform code into the common ColdFire code directory m68knommu: move the 528x platform code into the common ColdFire code directory m68knommu: move the 527x platform code into the common ColdFire code directory m68knommu: move the 5272 platform code into the common ColdFire code directory m68knommu: move the 5249 platform code into the common ColdFire code directory m68knommu: move the 523x platform code into the common ColdFire code directory m68knommu: move the 520x platform code into the common ColdFire code directory m68knommu: move the 5206 platform code into the common ColdFire code directory m68knommu: simplify the ColdFire 5407 GPIO struct setup m68knommu: simplify the ColdFire 532x GPIO struct setup m68knommu: simplify the ColdFire 5307 GPIO struct setup m68knommu: simplify the ColdFire 528x GPIO struct setup m68knommu: simplify the ColdFire 527x GPIO struct setup ...
-
Linus Torvalds authored
This reverts commit 8c01a529. It turns out the d_unhashed() check isn't unnecessary after all: while it's true that unhashing will increment the sequence numbers, that does not necessarily invalidate the RCU lookup, because it might have seen the dentry pointer (before it got unhashed), but by the time it loaded the sequence number, it could have seen the *new* sequence number (after it got unhashed). End result: we might look up an unhashed dentry that is about to be freed, with the sequence number never indicating anything bad about it. So checking that the dentry is still hashed (*after* reading the sequence number) is indeed the proper fix, and was never unnecessary. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA changes from Roland Dreier: - Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters - Add generic and mlx4 support for "raw" QPs: allow suitably privileged applications to send and receive arbitrary packets directly to/from the hardware - Add "doorbell drop" handling to the cxgb4 driver - A fairly large batch of qib hardware driver changes - A few fixes for lockdep-detected issues - A few other miscellaneous fixes and cleanups Fix up trivial conflict in drivers/net/ethernet/emulex/benet/be.h. * tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (53 commits) RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree IB/mlx4: Fix mlx4_ib_add() error flow IB/core: Fix IB_SA_COMP_MASK macro IB/iser: Fix error flow in iser ep connection establishment IB/mlx4: Increase the number of vectors (EQs) available for ULPs RDMA/cxgb4: Add query_qp support RDMA/cxgb4: Remove kfifo usage RDMA/cxgb4: Use vmalloc() for debugfs QP dump RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queues RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch() RDMA/cxgb4: Add DB Overflow Avoidance RDMA/cxgb4: Add debugfs RDMA memory stats cxgb4: DB Drop Recovery for RDMA and LLD queues cxgb4: Common platform specific changes for DB Drop Recovery cxgb4: Detect DB FULL events and notify RDMA ULD RDMA/cxgb4: Drop peer_abort when no endpoint found RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr() mlx4_core: Change bitmap allocator to work in round-robin fashion RDMA/nes: Don't call event handler if pointer is NULL RDMA/nes: Fix for the ORD value of the connecting peer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI misc update from James Bottomley: "The patch contains the usual assortment of driver updates (be2iscsi, bfa, bnx2i, fcoe, hpsa, isci, lpfc, megaraid, mpt2sas, pm8001, sg) plus an assortment of other changes and fixes. Also new is the fact that the isci update is delivered as a git merge (with signed tag)." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (158 commits) isci: End the RNC resumption wait when the RNC is destroyed. isci: Fixed RNC bug that lost the suspension or resumption during destroy isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition. isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock. isci: Remove obviated host callback list. isci: Check IDEV_GONE before performing abort path operations. isci: Restore the ATAPI device RNC management code. isci: Don't wait for an RNC suspend if it's being destroyed. isci: Change the phy control and link reset interface for HW reasons. isci: Added timeouts to RNC suspensions in the abort path. isci: Add protocol indicator for TMF requests. isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs. isci: Wait for RNC resumption before leaving the abort path. isci: Fix RNC suspend call for SCI_RESUMING state. isci: Manage tag releases differently when aborting tasks. isci: Callbacks to libsas occur under scic_lock and are synchronized. isci: When in the abort path, defeat other resume calls until done. isci: Implement waiting for suspend in the abort path. isci: Make sure all TCs are terminated and cleaned in LUN reset. isci: Manage the LLHANG timer enable/disable per-device. ...
-
