For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

There is no validation of 'e->no_of_channels' which can trigger an
out-of-bounds write in the following 'memset' call. Validate that the
number of channels does not extends beyond the size of the channel list
element.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com

Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains
enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too
small then it can trigger an out-of-bounds write later in the function.

'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len'
does not extend beyond the end of 'buf'.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com

Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains
enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is
too small then it triggers an out-of-bounds write later in the function.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com

There is no validation of 'offset' which can trigger an out-of-bounds
read when extracting RSN capabilities.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com

Neither Redpine Signals nor Silicon Labs seem to care about proper
maintenance of this driver, nor is there any help, documentation or
feedback on patches. The driver suffers from various problems and
subtle bugs. Mark it as orphaned.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221113185838.11643-1-marex@denx.de

Kalle Valo says:

====================
wireless fixes for v6.1

Second set of fixes for v6.1. Some fixes to char type usage in
drivers, memory leaks in the stack and also functionality fixes. The
rt2x00 char type fix is a larger (but still simple) commit, otherwise
the fixes are small in size.

* tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
  wifi: ath11k: Fix QCN9074 firmware boot on x86
  wifi: mac80211: Set TWT Information Frame Disabled bit as 1
  wifi: mac80211: Fix ack frame idr leak when mesh has no route
  wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()
  wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()
  wifi: airo: do not assign -1 to unsigned char
  wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
  wifi: cfg80211: Fix bitrates overflow issue
  wifi: cfg80211: fix memory leak in query_regdb_file()
  wifi: mac80211: fix memory free error when registering wiphy fail
  wifi: cfg80211: silence a sparse RCU warning
  wifi: rt2x00: use explicitly signed or unsigned types
====================

Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 3dcbdb13 ("net: gso: Fix skb_segment splat when
splitting gso_size mangled skb having linear-headed frag_list"), it is
allowed to change gso_size of a GRO packet. However, that commit assumes
that "checking the first list_skb member suffices; i.e if either of the
list_skb members have non head_frag head, then the first one has too".

It turns out this assumption does not hold. We've seen BUG_ON being hit
in skb_segment when skbs on the frag_list had differing head_frag with
the vmxnet3 driver. This happens because __netdev_alloc_skb and
__napi_alloc_skb can return a skb that is page backed or kmalloced
depending on the requested size. As the result, the last small skb in
the GRO packet can be kmalloced.

There are three different locations where this can be fixed:

(1) We could check head_frag in GRO and not allow GROing skbs with
    different head_frag. However, that would lead to performance
    regression on normal forward paths with unmodified gso_size, where
    !head_frag in the last packet is not a problem.

(2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating
    that NETIF_F_SG is undesirable. That would need to eat a bit in
    sk_buff. Furthermore, that flag can be unset when all skbs on the
    frag_list are page backed. To retain good performance,
    bpf_skb_net_grow/shrink would have to walk the frag_list.

(3) Walk the frag_list in skb_segment when determining whether
    NETIF_F_SG should be cleared. This of course slows things down.

This patch implements (3). To limit the performance impact in
skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set
that have gso_size changed. Normal paths thus will not hit it.

We could check only the last skb but since we need to walk the whole
list anyway, let's stay on the safe side.

Fixes: 3dcbdb13 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/e04426a6a91baf4d1081e1b478c82b5de25fdf21.1667407944.git.jbenc@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf 2022-11-04

We've added 8 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 113 insertions(+), 16 deletions(-).

The main changes are:

1) Fix memory leak upon allocation failure in BPF verifier's stack state
   tracking, from Kees Cook.

2) Fix address leakage when BPF progs release reference to an object,
   from Youlin Li.

3) Fix BPF CI breakage from buggy in.h uapi header dependency,
   from Andrii Nakryiko.

4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui.

5) Fix BPF sockmap lockdep warning by cancelling psock work outside
   of socket lock, from Cong Wang.

6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting,
   from Wang Yufen.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add verifier test for release_reference()
  bpf: Fix wrong reg type conversion in release_reference()
  bpf, sock_map: Move cancel_work_sync() out of sock lock
  tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI
  net/ipv4: Fix linux/in.h header dependencies
  bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
  bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
  bpf, verifier: Fix memory leak in array reallocation for stack state
====================

Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a test case to ensure that released pointer registers will not be
leaked into the map.

Before fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg FAIL
    Unexpected success to load!
    verification time 67 usec
    stack depth 4
    processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
    peak_states 2 mark_read 1
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 1 PASSED, 0 SKIPPED, 1 FAILED

After fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg OK
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com

Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.

When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply  __mark_reg_unknown() to each relevant register.

It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.

Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.

Fixes: fd978bf7 ("bpf: Add reference tracking to verifier")
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - net: several zerocopy flags fixes

   - netfilter: fix possible memory leak in nf_nat_init()

   - openvswitch: add missing .resv_start_op

  Previous releases - regressions:

   - neigh: fix null-ptr-deref in neigh_table_clear()

   - sched: fix use after free in red_enqueue()

   - dsa: fall back to default tagger if we can't load the one from DT

   - bluetooth: fix use-after-free in l2cap_conn_del()

  Previous releases - always broken:

   - netfilter: netlink notifier might race to release objects

   - nfc: fix potential memory leak of skb

   - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu

   - bluetooth: use skb_put to set length

   - eth: tun: fix bugs for oversize packet when napi frags enabled

   - eth: lan966x: fixes for when MTU is changed

   - eth: dwmac-loongson: fix invalid mdio_node"

* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  vsock: fix possible infinite sleep in vsock_connectible_wait_data()
  vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
  ipv6: fix WARNING in ip6_route_net_exit_late()
  bridge: Fix flushing of dynamic FDB entries
  net, neigh: Fix null-ptr-deref in neigh_table_clear()
  net/smc: Fix possible leaked pernet namespace in smc_init()
  stmmac: dwmac-loongson: fix invalid mdio_node
  ibmvnic: Free rwi on reset success
  net: mdio: fix undefined behavior in bit shift for __mdiobus_register
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  isdn: mISDN: netjet: fix wrong check of device registration
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix an endian thinko in the asm-generic compat_arg_u64() which led to
   syscall arguments being swapped for some compat syscalls.

 - Fix syscall wrapper handling of syscalls with 64-bit arguments on
   32-bit kernels, which led to syscall arguments being misplaced.

 - A build fix for amdgpu on Book3E with AltiVec disabled.

Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.

* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Select ARCH_SPLIT_ARG64
  powerpc/32: fix syscall wrappers with 64-bit arguments
  asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
  powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec

Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:

psock->work.func = sk_psock_backlog()
  ACQUIRE psock->work_mutex
    sk_psock_handle_skb()
      skb_send_sock()
        __skb_send_sock()
          sendpage_unlocked()
            kernel_sendpage()
              sock->ops->sendpage = inet_sendpage()
                sk->sk_prot->sendpage = tcp_sendpage()
                  ACQUIRE sk->sk_lock
                    tcp_sendpage_locked()
                  RELEASE sk->sk_lock
  RELEASE psock->work_mutex

sock_map_close()
  ACQUIRE sk->sk_lock
  sk_psock_stop()
    sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
    cancel_work_sync()
      __cancel_work_timer()
        __flush_work()
          // wait for psock->work to finish
  RELEASE sk->sk_lock

We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.

Fixes: 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com

With recent sync of linux/in.h tools/include headers are now relying on
__DECLARE_FLEX_ARRAY macro, which isn't itself defined inside
tools/include headers anywhere and is instead assumed to be present in
system-wide UAPI header. This breaks isolated environments that don't
have kernel UAPI headers installed system-wide, like BPF CI ([0]).

To fix this, bring in include/uapi/linux/stddef.h into tools/include.
We can't just copy/paste it, though, it has to be processed with
scripts/headers_install.sh, which has a dependency on scripts/unifdef.
So the full command to (re-)generate stddef.h for inclusion into
tools/include directory is:

  $ make scripts_unifdef && \
    cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \
    scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h

This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds.

  [0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609

Fixes: 036b8f5b ("tools headers uapi: Update linux/in.h copy")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org

__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but
doesn't seem to be explicitly included from include/uapi/linux/in.h,
which breaks BPF selftests builds (once we sync linux/stddef.h into
tools/include directory in the next patch). Fix this by explicitly
including linux/stddef.h.

Given this affects BPF CI and bpf tree, targeting this for bpf tree.

Fixes: 5854a09b ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org

Dexuan Cui says:

====================
vsock: remove an unused variable and fix infinite sleep

Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================

Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().

Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().

Fixes: b3f7fd54 ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Remove the unused variable introduced by 19c1b90e.

Fixes: 19c1b90e ("af_vsock: separate receive data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.

The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>

Fixes: cdb18761 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.

After the fix:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:aa:bb:cc:dd:ee master br0 static
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

Fixes: 1f78ee14 ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:

KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
 <TASK>
 neigh_table_clear+0x94/0x2d0
 ndisc_cleanup+0x27/0x40 [ipv6]
 inet6_init+0x21c/0x2cb [ipv6]
 do_one_initcall+0xd3/0x4d0
 do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception

When ipv6 initialization fails, it will try to cleanup and calls:

neigh_table_clear()
  neigh_ifdown(tbl, NULL)
    pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
    # dev_net(NULL) triggers null-ptr-deref.

Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.

Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.

This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:

BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
  <TASK>
  register_pernet_subsys+0x29/0x40
  ebtables_init+0x58/0x1000 [ebtables]
  ...

Fixes: 194730a9 ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1f ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.

Fixes: 4f408e1f ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 __mdiobus_register+0x49d/0x4e0
 fixed_mdio_bus_init+0xd8/0x12d
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 4fd5f812 ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

1) netlink socket notifier might win race to release objects that are
   already pending to be released via commit release path, reported by
   syzbot.

2) No need to postpone flow rule release to commit release path, this
   triggered the syzbot report, complementary fix to previous patch.

3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.

4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.

5) Incorrect error path handling when BPF NAT fails to register, from
   Chen Zhongjin.

6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.

Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
  ipvs: fix WARNING in ip_vs_app_net_cleanup()
  ipvs: fix WARNING in __ip_vs_cleanup_batch()
  ipvs: use explicitly signed chars
  netfilter: nf_tables: release flow rule object from commit path
  netfilter: nf_tables: netlink notifier might race to release objects
====================

Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth 2022-11-02

 - Fix memory leak in hci_vhci driver
 - Fix handling of skb on virtio_bt driver
 - Fix accepting connection for invalid L2CAP PSM
 - Fix attemting to access uninitialized memory
 - Fix use-after-free in l2cap_reassemble_sdu
 - Fix use-after-free in l2cap_conn_del
 - Fix handling of destination address type for CIS
 - Fix not restoring ISO buffer count on disconnect

* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================

Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.

CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:

  BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
  page 1059:
  Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges

CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>

Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
  [...]
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
    [<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
    [<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
    [<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
    [<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
    [<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
    [<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
    [<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
    [<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
    [<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================

HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.

Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.

This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().

Fixes: 4d7ea8ee ("Bluetooth: L2CAP: Fix handling fragmented length")
Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/
Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
 l2cap_chan_unlock(chan) will trigger UAF issue.

The process is as follows:
Receive data:
l2cap_data_channel()
    a2mp_channel_create()  --->channel ref is 2
    l2cap_chan_put()       --->channel ref is 1

Triger event:
    hci_error_reset()
        hci_dev_do_close()
        ...
        l2cap_disconn_cfm()
            l2cap_conn_del()
                l2cap_chan_hold()    --->channel ref is 2
                l2cap_chan_del()     --->channel ref is 1
                a2mp_chan_close_cb() --->channel ref is 0, release channel
                l2cap_chan_unlock()  --->UAF of channel

The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
 <TASK>
 dump_stack_lvl+0xcd/0x134
 print_report.cold+0x2ba/0x719
 kasan_report+0xb1/0x1e0
 kasan_check_range+0x140/0x190
 __mutex_unlock_slowpath+0xa6/0x5e0
 l2cap_conn_del+0x404/0x7b0
 l2cap_disconn_cfm+0x8c/0xc0
 hci_conn_hash_flush+0x11f/0x260
 hci_dev_close_sync+0x5f5/0x11f0
 hci_dev_do_close+0x2d/0x70
 hci_error_reset+0x9e/0x140
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30
 </TASK>

Allocated by task 7593:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0xa9/0xd0
 l2cap_chan_create+0x40/0x930
 amp_mgr_create+0x96/0x990
 a2mp_channel_create+0x7d/0x150
 l2cap_recv_frame+0x51b8/0x9a70
 l2cap_recv_acldata+0xaa3/0xc00
 hci_rx_work+0x702/0x1220
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30

Freed by task 7593:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x167/0x1c0
 slab_free_freelist_hook+0x89/0x1c0
 kfree+0xe2/0x580
 l2cap_chan_put+0x22a/0x2d0
 l2cap_conn_del+0x3fc/0x7b0
 l2cap_disconn_cfm+0x8c/0xc0
 hci_conn_hash_flush+0x11f/0x260
 hci_dev_close_sync+0x5f5/0x11f0
 hci_dev_do_close+0x2d/0x70
 hci_error_reset+0x9e/0x140
 process_one_work+0x98a/0x1620
 worker_thread+0x665/0x1080
 kthread+0x2e4/0x3a0
 ret_from_fork+0x1f/0x30

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0xbe/0xd0
 call_rcu+0x99/0x740
 netlink_release+0xe6a/0x1cf0
 __sock_release+0xcd/0x280
 sock_close+0x18/0x20
 __fput+0x27c/0xa90
 task_work_run+0xdd/0x1a0
 exit_to_user_mode_prepare+0x23c/0x250
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x42/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
 kasan_save_stack+0x1e/0x40
 __kasan_record_aux_stack+0xbe/0xd0
 call_rcu+0x99/0x740
 netlink_release+0xe6a/0x1cf0
 __sock_release+0xcd/0x280
 sock_close+0x18/0x20
 __fput+0x27c/0xa90
 task_work_run+0xdd/0x1a0
 exit_to_user_mode_prepare+0x23c/0x250
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x42/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: d0be8347 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:

    BUG: unable to handle page fault for address: ffffed1021de29ff
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)

Fixes: afd2daa2 ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.

CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections.  Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Fix the race condition between the following two flows that run in
parallel:

1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
   __sock_queue_rcv_skb.

2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.

An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).

Fix it by keeping a local copy of struct l2cap_ctrl.

BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169

Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
 <TASK>
 dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
 print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
 ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
 ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
 l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
 ret_from_fork (arch/x86/entry/entry_64.S:306)
 </TASK>

Allocated by task 43169:
 kasan_save_stack (mm/kasan/common.c:39)
 __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
 kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
 __alloc_skb (net/core/skbuff.c:414)
 l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
 l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
 hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
 process_one_work (kernel/workqueue.c:2289)
 worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
 kthread (kernel/kthread.c:376)
 ret_from_fork (arch/x86/entry/entry_64.S:306)

Freed by task 27920:
 kasan_save_stack (mm/kasan/common.c:39)
 kasan_set_track (mm/kasan/common.c:45)
 kasan_set_free_info (mm/kasan/generic.c:372)
 ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
 slab_free_freelist_hook (mm/slub.c:1780)
 kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
 skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
 bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
 l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
 sock_read_iter (net/socket.c:1087)
 new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
 vfs_read (fs/read_write.c:482)
 ksys_read (fs/read_write.c:620)
 do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae9 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pull parisc architecture fixes from Helge Deller:
 "This mostly handles oddities with the serial port 8250_gsc.c driver.

  Although the name suggests it's just for serial ports on the GSC bus
  (e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
  PCI devices (e.g. on the SuperIO chip) as well.

  Thus this renames the driver to 8250_parisc and fixes the config
  dependencies.

  The other change is a cleanup on how the device IDs of devices in a
  PA-RISC machine are shown at startup"

* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid printing the hardware path twice
  parisc: Export iosapic_serial_irq() symbol for serial port driver
  MAINTAINERS: adjust entry after renaming parisc serial driver
  parisc: Use signed char for hardware path in pdc.h
  parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
  parisc: Make 8250_gsc driver dependend on CONFIG_PARISC

Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.

The quick reproducer is

$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done

The backtrace when vmalloc fails:

        [Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
        <...>
        [Tue Oct 25 00:13:08 2022] Call Trace:
        [Tue Oct 25 00:13:08 2022]  <TASK>
        [Tue Oct 25 00:13:08 2022]  dump_stack_lvl+0x48/0x60
        [Tue Oct 25 00:13:08 2022]  warn_alloc+0x155/0x180
        [Tue Oct 25 00:13:08 2022]  __vmalloc_node_range+0x72a/0x760
        [Tue Oct 25 00:13:08 2022]  ? hash_netiface4_add+0x7c0/0xb20
        [Tue Oct 25 00:13:08 2022]  ? __kmalloc_large_node+0x4a/0x90
        [Tue Oct 25 00:13:08 2022]  kvmalloc_node+0xa6/0xd0
        [Tue Oct 25 00:13:08 2022]  ? hash_netiface4_resize+0x99/0x710
        <...>

The fix is to enforce the limit documented in the ipset(8) manpage:

>  The internal restriction of the hash:net,iface set type is that the same
>  network prefix cannot be stored with more than 64 different interfaces
>  in a single set.

Fixes: ccf0a4b7 ("netfilter: ipset: Add bucketsize parameter to all hash types")
Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull NFS client bugfixes from Anna Schumaker:

 - Fix some coccicheck warnings

 - Avoid memcpy() run-time warning

 - Fix up various state reclaim / RECLAIM_COMPLETE errors

 - Fix a null pointer dereference in sysfs

 - Fix LOCK races

 - Fix gss_unwrap_resp_integ() crasher

 - Fix zero length clones

 - Fix memleak when allocate slot fails

* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs4: Fix kmemleak when allocate slot failed
  NFSv4.2: Fixup CLONE dest file size for zero-length count
  SUNRPC: Fix crasher in gss_unwrap_resp_integ()
  NFSv4: Retry LOCK on OLD_STATEID during delegation return
  SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
  NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
  NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
  NFSv4: Fix a potential state reclaim deadlock
  NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
  nfs: Remove redundant null checks before kfree