1. 02 May, 2017 6 commits
  2. 01 May, 2017 3 commits
    • Linus Torvalds's avatar
      Merge branch 'for-4.12/post-merge' of git://git.kernel.dk/linux-block · 08c521a2
      Linus Torvalds authored
      Pull second round of block layer updates from Jens Axboe:
      
       - Further fixups to the NVMe APST code, from Andy.
      
       - Various fixes for (mostly) nvme-fc, from Christoph and James.
      
       - NVMe scsi fixes from Jon and Christoph.
      
      * 'for-4.12/post-merge' of git://git.kernel.dk/linux-block: (39 commits)
        nvme-scsi: remove nvme_trans_security_protocol
        nvme-lightnvm: add missing endianess conversion in nvme_nvm_end_io
        nvme-scsi: Consider LBA format in IO splitting calculation
        nvme-fc: avoid memory corruption caused by calling nvmf_free_options() twice
        lpfc: Fix memory corruption of the lpfc_ncmd->list pointers
        nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
        nvme: Display raw APST configuration via DYNAMIC_DEBUG
        nvme: Fix APST comment
        lpfc revison 11.2.0.12
        Fix Express lane queue creation.
        Update ABORT processing for NVMET.
        Fix implicit logo and RSCN handling for NVMET
        Add Fabric assigned WWN support.
        Fix max_sgl_segments settings for NVME / NVMET
        Fix crash after issuing lip reset
        Fix driver load issues when MRQ=8
        Remove hba lock from NVMET issue WQE.
        Fix nvme initiator handling when not enabled.
        Fix driver usage of 128B WQEs when WQ_CREATE is V1.
        Fix driver unload/reload operation.
        ...
      08c521a2
    • Linus Torvalds's avatar
      Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block · 69475292
      Linus Torvalds authored
      Pull block layer updates from Jens Axboe:
      
       - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
         was initially a fork of CFQ, but subsequently changed to implement
         fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
         to be used on desktop type single drives, providing good fairness.
         From Paolo.
      
       - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
         using a scalable token based algorithm that throttles IO based on
         live completion IO stats, similary to blk-wbt. From Omar.
      
       - A series from Jan, moving users to separately allocated backing
         devices. This continues the work of separating backing device life
         times, solving various problems with hot removal.
      
       - A series of updates for lightnvm, mostly from Javier. Includes a
         'pblk' target that exposes an open channel SSD as a physical block
         device.
      
       - A series of fixes and improvements for nbd from Josef.
      
       - A series from Omar, removing queue sharing between devices on mostly
         legacy drivers. This helps us clean up other bits, if we know that a
         queue only has a single device backing. This has been overdue for
         more than a decade.
      
       - Fixes for the blk-stats, and improvements to unify the stats and user
         windows. This both improves blk-wbt, and enables other users to
         register a need to receive IO stats for a device. From Omar.
      
       - blk-throttle improvements from Shaohua. This provides a scalable
         framework for implementing scalable priotization - particularly for
         blk-mq, but applicable to any type of block device. The interface is
         marked experimental for now.
      
       - Bucketized IO stats for IO polling from Stephen Bates. This improves
         efficiency of polled workloads in the presence of mixed block size
         IO.
      
       - A few fixes for opal, from Scott.
      
       - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
         From a variety of folks, mostly Sagi and James Smart.
      
       - A series from Bart, improving our exposed info and capabilities from
         the blk-mq debugfs support.
      
       - A series from Christoph, cleaning up how handle WRITE_ZEROES.
      
       - A series from Christoph, cleaning up the block layer handling of how
         we track errors in a request. On top of being a nice cleanup, it also
         shrinks the size of struct request a bit.
      
       - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
         never used by platforms, and the latter has outlived it's usefulness.
      
       - Various little bug fixes and cleanups from a wide variety of folks.
      
      * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
        block: hide badblocks attribute by default
        blk-mq: unify hctx delay_work and run_work
        block: add kblock_mod_delayed_work_on()
        blk-mq: unify hctx delayed_run_work and run_work
        nbd: fix use after free on module unload
        MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
        blk-mq-sched: alloate reserved tags out of normal pool
        mtip32xx: use runtime tag to initialize command header
        scsi: Implement blk_mq_ops.show_rq()
        blk-mq: Add blk_mq_ops.show_rq()
        blk-mq: Show operation, cmd_flags and rq_flags names
        blk-mq: Make blk_flags_show() callers append a newline character
        blk-mq: Move the "state" debugfs attribute one level down
        blk-mq: Unregister debugfs attributes earlier
        blk-mq: Only unregister hctxs for which registration succeeded
        blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
        blk-mq: Let blk_mq_debugfs_register() look up the queue name
        blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
        ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
        ide-pm: always pass 0 error to __blk_end_request_all
        ..
      69475292
    • Linus Torvalds's avatar
      Linux 4.11 · a351e9b9
      Linus Torvalds authored
      a351e9b9
  3. 30 Apr, 2017 3 commits
  4. 29 Apr, 2017 3 commits
  5. 28 Apr, 2017 21 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 0e911788
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Just a couple more stragglers, I really hope this is it.
      
        1) Don't let frags slip down into the GRO segmentation handlers, from
           Steffen Klassert.
      
        2) Truesize under-estimation triggers warnings in TCP over loopback
           with socket filters, 2 part fix from Eric Dumazet.
      
        3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal,
           from Paolo Abeni.
      
        4) If we flush the XFRM policy after garbage collection, it doesn't
           work because stray entries can be created afterwards. Fix from Xin
           Long.
      
        5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan.
      
        6) Fix GRO regression with IPSEC when netfilter is disabled, from
           Sabrina Dubroca.
      
        7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        net: hso: register netdev later to avoid a race condition
        net: adjust skb->truesize in ___pskb_trim()
        tcp: do not underestimate skb->truesize in tcp_trim_head()
        bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
        ipv4: Don't pass IP fragments to upper layer GRO handlers.
        cpsw/netcp: refine cpts dependency
        tipc: close the connection if protocol messages contain errors
        tipc: improve error validations for sockets in CONNECTING state
        tipc: Fix missing connection request handling
        xfrm: fix GRO for !CONFIG_NETFILTER
        xfrm: do the garbage collection after flushing policy
      0e911788
    • Andreas Kemnade's avatar
      net: hso: register netdev later to avoid a race condition · 4c761daf
      Andreas Kemnade authored
      If the netdev is accessed before the urbs are initialized,
      there will be NULL pointer dereferences. That is avoided by
      registering it when it is fully initialized.
      
      This case occurs e.g. if dhcpcd is running in the background
      and the device is probed, either after insmod hso or
      when the device appears on the usb bus.
      
      A backtrace is the following:
      
      [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap
      [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
      [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
      [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem
      [ 1357.574096] usb 1-2: Manufacturer: Option N.V.
      [ 1357.685882] hso 1-2:1.5: Not our interface
      [ 1460.886352] hso: unloaded
      [ 1460.889984] usbcore: deregistering interface driver hso
      [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless
      [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030
      [ 1513.887664] hso 1-2:1.5: Not our interface
      [ 1513.906890] usbcore: registered new interface driver hso
      [ 1513.937988] pgd = ecdec000
      [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000
      [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
      [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007
      [ 1514.037384]  bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso]
      [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G        W       4.11.0-rc8-letux+ #1
      [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree)
      [ 1514.077758] task: ee748240 task.stack: ecdd6000
      [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso]
      [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso]
      [ 1514.093231] pc : [<bf79c304>]    lr : [<bf79ced8>]    psr: a00f0013
      sp : ecdd7e20  ip : 00000000  fp : ffffffff
      [ 1514.105316] r10: 00000000  r9 : ed0e080c  r8 : ecd8fe2c
      [ 1514.110839] r7 : bf79cef4  r6 : ecd8fe00  r5 : 00000000  r4 : ed0dbd80
      [ 1514.117706] r3 : 00000000  r2 : c0020c80  r1 : 00000000  r0 : ecdb7800
      [ 1514.124572] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
      [ 1514.132110] Control: 10c5387d  Table: acdec019  DAC: 00000051
      [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218)
      [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000)
      [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000
      [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958
      [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090
      [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800
      [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000
      [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914
      [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948
      [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654
      [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0
      [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240
      [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000
      [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4
      [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091
      [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858
      [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000
      [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso])
      [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4)
      [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130)
      [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48)
      [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714)
      [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308)
      [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34)
      [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c)
      [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74)
      [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c)
      [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030)
      [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]---
      Reported-by: default avatarH. Nikolaus Schaller <hns@goldelico.com>
      Signed-off-by: default avatarAndreas Kemnade <andreas@kemnade.info>
      Reviewed-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4c761daf
    • Eric Dumazet's avatar
      net: adjust skb->truesize in ___pskb_trim() · c21b48cc
      Eric Dumazet authored
      Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
      skb_try_coalesce() using syzkaller and a filter attached to a TCP
      socket.
      
      As we did recently in commit 158f323b ("net: adjust skb->truesize in
      pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(),
      via a call to skb_condense().
      
      If all frags were freed, then skb->truesize can be recomputed.
      
      This call can be done if skb is not yet owned, or destructor is
      sock_edemux().
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c21b48cc
    • Eric Dumazet's avatar
      tcp: do not underestimate skb->truesize in tcp_trim_head() · 7162fb24
      Eric Dumazet authored
      Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
      skb_try_coalesce() using syzkaller and a filter attached to a TCP
      socket over loopback interface.
      
      I believe one issue with looped skbs is that tcp_trim_head() can end up
      producing skb with under estimated truesize.
      
      It hardly matters for normal conditions, since packets sent over
      loopback are never truncated.
      
      Bytes trimmed from skb->head should not change skb truesize, since
      skb->head is not reallocated.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Tested-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7162fb24
    • Paolo Abeni's avatar
      bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal · 19cdead3
      Paolo Abeni authored
      On slave list updates, the bonding driver computes its hard_header_len
      as the maximum of all enslaved devices's hard_header_len.
      If the slave list is empty, e.g. on last enslaved device removal,
      ETH_HLEN is used.
      
      Since the bonding header_ops are set only when the first enslaved
      device is attached, the above can lead to header_ops->create()
      being called with the wrong skb headroom in place.
      
      If bond0 is configured on top of ipoib devices, with the
      following commands:
      
      ifup bond0
      for slave in $BOND_SLAVES_LIST; do
      	ip link set dev $slave nomaster
      done
      ping -c 1 <ip on bond0 subnet>
      
      we will obtain a skb_under_panic() with a similar call trace:
      	skb_push+0x3d/0x40
      	push_pseudo_header+0x17/0x30 [ib_ipoib]
      	ipoib_hard_header+0x4e/0x80 [ib_ipoib]
      	arp_create+0x12f/0x220
      	arp_send_dst.part.19+0x28/0x50
      	arp_solicit+0x115/0x290
      	neigh_probe+0x4d/0x70
      	__neigh_event_send+0xa7/0x230
      	neigh_resolve_output+0x12e/0x1c0
      	ip_finish_output2+0x14b/0x390
      	ip_finish_output+0x136/0x1e0
      	ip_output+0x76/0xe0
      	ip_local_out+0x35/0x40
      	ip_send_skb+0x19/0x40
      	ip_push_pending_frames+0x33/0x40
      	raw_sendmsg+0x7d3/0xb50
      	inet_sendmsg+0x31/0xb0
      	sock_sendmsg+0x38/0x50
      	SYSC_sendto+0x102/0x190
      	SyS_sendto+0xe/0x10
      	do_syscall_64+0x67/0x180
      	entry_SYSCALL64_slow_path+0x25/0x25
      
      This change addresses the issue avoiding updating the bonding device
      hard_header_len when the slaves list become empty, forbidding to
      shrink it below the value used by header_ops->create().
      
      The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large
      hard_header_len") but the panic can be triggered only since
      commit fc791b63 ("IB/ipoib: move back IB LL address into the hard
      header").
      Reported-by: default avatarNorbert P <noe@physik.uzh.ch>
      Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len")
      Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header")
      Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      19cdead3
    • Steffen Klassert's avatar
      ipv4: Don't pass IP fragments to upper layer GRO handlers. · 9b83e031
      Steffen Klassert authored
      Upper layer GRO handlers can not handle IP fragments, so
      exit GRO processing in this case.
      
      This fixes ESP GRO because the packet must be reassembled
      before we can decapsulate, otherwise we get authentication
      failures.
      
      It also aligns IPv4 to IPv6 where packets with fragmentation
      headers are not passed to upper layer GRO handlers.
      
      Fixes: 7785bba2 ("esp: Add a software GRO codepath")
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b83e031
    • Arnd Bergmann's avatar
      cpsw/netcp: refine cpts dependency · 504926df
      Arnd Bergmann authored
      Tony Lindgren reports a kernel oops that resulted from my compile-time
      fix on the default config. This shows two problems:
      
      a) configurations that did not already enable PTP_1588_CLOCK will
         now miss the cpts driver
      
      b) when cpts support is disabled, the driver crashes. This is a
         preexisting problem that we did not notice before my patch.
      
      While the second problem is still being investigated, this modifies
      the dependencies again, getting us back to the original state, with
      another 'select NET_PTP_CLASSIFY' added in to avoid the original
      link error we got, and the 'depends on POSIX_TIMERS' to hide
      the CPTS support when turning it on would be useless.
      
      Cc: stable@vger.kernel.org # 4.11 needs this
      Fixes: 07fef362 ("cpsw/netcp: cpts depends on posix_timers")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Tested-by: default avatarTony Lindgren <tony@atomide.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      504926df
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 5577e679
      David S. Miller authored
      Steffen Klassert says:
      
      ====================
      pull request (net): ipsec 2017-04-28
      
      1) Do garbage collecting after a policy flush to remove old
         bundles immediately. From Xin Long.
      
      2) Fix GRO if netfilter is not defined.
         From Sabrina Dubroca.
      
      Please pull or let me know if there are problems.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5577e679
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · affb852d
      Linus Torvalds authored
      Pull input fix from Dmitry Torokhov:
       "Yet another quirk to i8042 to get touchpad recognized on some laptops"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: i8042 - add Clevo P650RS to the i8042 reset list
      affb852d
    • Arnd Bergmann's avatar
      clk: sunxi-ng: always select CCU_GATE · 36c02d0b
      Arnd Bergmann authored
      When the base driver is enabled but all SoC specific drivers are turned
      off, we now get a build error after code was added to always refer to the
      clk gates:
      
      drivers/clk/built-in.o: In function `ccu_pll_notifier_cb':
      :(.text+0x154f8): undefined reference to `ccu_gate_helper_disable'
      :(.text+0x15504): undefined reference to `ccu_gate_helper_enable'
      
      This changes the Kconfig to always require the gate code to be built-in
      when CONFIG_SUNXI_CCU is set.
      
      Fixes: 02ae2bc6 ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
      Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      36c02d0b
    • Linus Torvalds's avatar
      Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · 28b20135
      Linus Torvalds authored
      Pull btrfs fix from Chris Mason:
       "We have one more fix for btrfs.
      
        This gets rid of a new WARN_ON from rc1 that ended up making more
        noise than we really want. The larger fix for the underflow got
        delayed a bit and it's better for now to put it under
        CONFIG_BTRFS_DEBUG"
      
      * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
        btrfs: qgroup: move noisy underflow warning to debugging build
      28b20135
    • David S. Miller's avatar
      Merge branch 'tipc-socket-connection-hangs' · c5184717
      David S. Miller authored
      Parthasarathy Bhuvaragan says:
      
      ====================
      tipc: fix hanging socket connections
      
      This patch series contains fixes for the socket layer to
      prevent hanging / stale connections.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c5184717
    • Parthasarathy Bhuvaragan's avatar
      tipc: close the connection if protocol messages contain errors · c1be7756
      Parthasarathy Bhuvaragan authored
      When a socket is shutting down, we notify the peer node about the
      connection termination by reusing an incoming message if possible.
      If the last received message was a connection acknowledgment
      message, we reverse this message and set the error code to
      TIPC_ERR_NO_PORT and send it to peer.
      
      In tipc_sk_proto_rcv(), we never check for message errors while
      processing the connection acknowledgment or probe messages. Thus
      this message performs the usual flow control accounting and leaves
      the session hanging.
      
      In this commit, we terminate the connection when we receive such
      error messages.
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c1be7756
    • Parthasarathy Bhuvaragan's avatar
      tipc: improve error validations for sockets in CONNECTING state · 4e0df495
      Parthasarathy Bhuvaragan authored
      Until now, the checks for sockets in CONNECTING state was based on
      the assumption that the incoming message was always from the
      peer's accepted data socket.
      
      However an application using a non-blocking socket sends an implicit
      connect, this socket which is in CONNECTING state can receive error
      messages from the peer's listening socket. As we discard these
      messages, the application socket hangs as there due to inactivity.
      In addition to this, there are other places where we process errors
      but do not notify the user.
      
      In this commit, we process such incoming error messages and notify
      our users about them using sk_state_change().
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e0df495
    • Parthasarathy Bhuvaragan's avatar
      tipc: Fix missing connection request handling · 42b531de
      Parthasarathy Bhuvaragan authored
      In filter_connect, we use waitqueue_active() to check for any
      connections to wakeup. But waitqueue_active() is missing memory
      barriers while accessing the critical sections, leading to
      inconsistent results.
      
      In this commit, we replace this with an SMP safe wq_has_sleeper()
      using the generic socket callback sk_data_ready().
      Signed-off-by: default avatarParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42b531de
    • Dan Williams's avatar
      block: hide badblocks attribute by default · 9438b3e0
      Dan Williams authored
      Commit 99e6608c "block: Add badblock management for gendisks"
      allowed for drivers like pmem and software-raid to advertise a list of
      bad media areas. However, it inadvertently added a 'badblocks' to all
      block devices. Lets clean this up by having the 'badblocks' attribute
      not be visible when the driver has not populated a 'struct badblocks'
      instance in the gendisk.
      
      Cc: Jens Axboe <axboe@fb.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Martin K. Petersen <martin.petersen@oracle.com>
      Reported-by: default avatarVishal Verma <vishal.l.verma@intel.com>
      Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Tested-by: default avatarVishal Verma <vishal.l.verma@intel.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      9438b3e0
    • Jens Axboe's avatar
      blk-mq: unify hctx delay_work and run_work · 21c6e939
      Jens Axboe authored
      The only difference between ->run_work and ->delay_work, is that
      the latter is used to defer running a queue. This is done by
      marking the queue stopped, and scheduling ->delay_work to run
      sometime in the future. While the queue is stopped, direct runs
      or runs through ->run_work will not run the queue.
      
      If we combine the handlers, then we need to handle two things:
      
      1) If a delayed/stopped run is scheduled, then we should not run
         the queue before that has been completed.
      2) If a queue is delayed/stopped, the handler needs to restart
         the queue. Normally a run of a queue with the stopped bit set
         would be a no-op.
      
      Case 1 is handled by modifying a currently pending queue run
      to the deadline set by the caller of blk_mq_delay_queue().
      Subsequent attempts to queue a queue run will find the work
      item already pending, and direct runs will see a stopped queue
      as before.
      
      Case 2 is handled by adding a new bit, BLK_MQ_S_START_ON_RUN,
      that tells the work handler that it should clear a stopped
      queue and run the handler.
      Reviewed-by: default avatarBart Van Assche <Bart.VanAssche@sandisk.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      21c6e939
    • Jens Axboe's avatar
      block: add kblock_mod_delayed_work_on() · 818cd1cb
      Jens Axboe authored
      This modifies (or adds, if not currently pending) an existing
      delayed work item.
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarBart Van Assche <Bart.VanAssche@sandisk.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      818cd1cb
    • Jens Axboe's avatar
      blk-mq: unify hctx delayed_run_work and run_work · 9f993737
      Jens Axboe authored
      They serve the exact same purpose. Get rid of the non-delayed
      work variant, and just run it without delay for the normal case.
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarBart Van Assche <Bart.VanAssche@sandisk.com>
      Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      9f993737
    • Josef Bacik's avatar
      nbd: fix use after free on module unload · 60ae36ad
      Josef Bacik authored
      list_for_each_entry() isn't super safe if we're freeing the objects
      while we traverse the list.  Also don't bother taking the extra
      reference, the module refcounting stuff will save us from having anybody
      messing with the device while we're trying to unload.
      Reported-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      60ae36ad
    • Ulf Hansson's avatar
      MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler · bf290f8f
      Ulf Hansson authored
      Seems like this was forgotten in the bfq-series from Paolo. Let's do it now
      so people don't miss out involving Paolo for any future changes or when
      reporting bugs.
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      bf290f8f
  6. 27 Apr, 2017 4 commits