Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.

With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.

To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value.  In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.

For simplicity, the physical address of the save area is added to struct
svm_cpu_data.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet.  It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).

As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4f ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15).  The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.

The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/f571e404-e625-bae1-10e9-449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded.  Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b12 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value.  However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.

Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Continue moving accesses to struct vcpu_svm to vmenter.S.  Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.

32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.

In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi.  In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.

This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c.  The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes: a149180f ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

* Fix the pKVM stage-1 walker erronously using the stage-2 accessor

* Correctly convert vcpu->kvm to a hyp pointer when generating
  an exception in a nVHE+MTE configuration

* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

* Document the boot requirements for FGT when entering the kernel
  at EL1

x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

* Make argument order consistent for kvcalloc()

* Userspace API fixes for DEBUGCTL and LBRs

Swap the 1st and 2nd arguments to be consistent with the usage of
kvcalloc().

Fixes: c9b8fecd ("KVM: use kvcalloc for array allocations")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Message-Id: <20221103011749.139262-1-liaochang1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):

[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S        I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904]  dump_stack_lvl+0x84/0xaa
[ 1416.659910]  dump_stack+0x10/0x15
[ 1416.659913]  lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919]  kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926]  ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935]  __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940]  kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946]  kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955]  __se_sys_ioctl+0x77/0xc0
[ 1416.659962]  __x64_sys_ioctl+0x1d/0x20
[ 1416.659965]  do_syscall_64+0x3d/0x80
[ 1416.659969]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.

In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.

Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
	build. This patch causes the suspicious RCU warning to disappear.
	Note that the warning is hit in __kvm_zap_rmaps(), so
	kvm_memslots_have_rmaps() must return true in order for this to
	repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com>
Fixes: 36222b11 ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull parisc architecture fixes from Helge Deller:
 "This mostly handles oddities with the serial port 8250_gsc.c driver.

  Although the name suggests it's just for serial ports on the GSC bus
  (e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
  PCI devices (e.g. on the SuperIO chip) as well.

  Thus this renames the driver to 8250_parisc and fixes the config
  dependencies.

  The other change is a cleanup on how the device IDs of devices in a
  PA-RISC machine are shown at startup"

* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid printing the hardware path twice
  parisc: Export iosapic_serial_irq() symbol for serial port driver
  MAINTAINERS: adjust entry after renaming parisc serial driver
  parisc: Use signed char for hardware path in pdc.h
  parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
  parisc: Make 8250_gsc driver dependend on CONFIG_PARISC

Pull NFS client bugfixes from Anna Schumaker:

 - Fix some coccicheck warnings

 - Avoid memcpy() run-time warning

 - Fix up various state reclaim / RECLAIM_COMPLETE errors

 - Fix a null pointer dereference in sysfs

 - Fix LOCK races

 - Fix gss_unwrap_resp_integ() crasher

 - Fix zero length clones

 - Fix memleak when allocate slot fails

* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs4: Fix kmemleak when allocate slot failed
  NFSv4.2: Fixup CLONE dest file size for zero-length count
  SUNRPC: Fix crasher in gss_unwrap_resp_integ()
  NFSv4: Retry LOCK on OLD_STATEID during delegation return
  SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
  NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
  NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
  NFSv4: Fix a potential state reclaim deadlock
  NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
  nfs: Remove redundant null checks before kfree

Pull rdma fixes from Jason Gunthorpe:
 "Fix a few more of the usual sorts of bugs:

   - Another regression with source route validation in CMA, introduced
     this merge window

   - Crash in hfi1 due to faulty list operations

   - PCI ID updates for EFA

   - Disable LOCAL_INV in hns because it causes a HW hang

   - Crash in hns due to missing initialization

   - Memory leak in rxe

   - Missing error unwind during ib_core module loading

   - Missing error handling in qedr around work queue creation during
     startup"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/qedr: clean up work queue on failure in qedr_alloc_resources()
  RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
  RDMA/rxe: Fix mr leak in RESPST_ERR_RNR
  RDMA/hns: Fix NULL pointer problem in free_mr_init()
  RDMA/hns: Disable local invalidate operation
  RDMA/efa: Add EFA 0xefa2 PCI ID
  IB/hfi1: Correctly move list in sc_disable()
  RDMA/cma: Use output interface for net_dev check

Ignore guest CPUID for host userspace writes to the DEBUGCTL MSR, KVM's
ABI is that setting CPUID vs. state can be done in any order, i.e. KVM
allows userspace to stuff MSRs prior to setting the guest's CPUID that
makes the new MSR "legal".

Keep the vmx_get_perf_capabilities() check for guest writes, even though
it's technically unnecessary since the vCPU's PERF_CAPABILITIES is
consulted when refreshing LBR support.  A future patch will clean up
vmx_get_perf_capabilities() to avoid the RDMSR on every call, at which
point the paranoia will incur no meaningful overhead.

Note, prior to vmx_get_perf_capabilities() checking that the host fully
supports LBRs via x86_perf_get_lbr(), KVM effectively relied on
intel_pmu_lbr_is_enabled() to guard against host userspace enabling LBRs
on platforms without full support.

Fixes: c6462363 ("KVM: vmx/pmu: Add PMU_CAP_LBR_FMT check when guest LBR is enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-5-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fold vmx_supported_debugctl() into vcpu_supported_debugctl(), its only
caller.  Setting bits only to clear them a few instructions later is
rather silly, and splitting the logic makes things seem more complicated
than they actually are.

Opportunistically drop DEBUGCTLMSR_LBR_MASK now that there's a single
reference to the pair of bits.  The extra layer of indirection provides
no meaningful value and makes it unnecessarily tedious to understand
what KVM is doing.

No functional change.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-4-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Advertise LBR support to userspace via MSR_IA32_PERF_CAPABILITIES if and
only if perf fully supports LBRs.  Perf may disable LBRs (by zeroing the
number of LBRs) even on platforms the allegedly support LBRs, e.g. if
probing any LBR MSRs during setup fails.

Fixes: be635e34 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Reported-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-3-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull documentation fixes from Jonathan Corbet:
 "Four small fixes for the docs tree"

* tag 'docs-6.1-fixes' of git://git.lwn.net/linux:
  docs/process/howto: Replace C89 with C11
  Documentation: Fix spelling mistake in hacking.rst
  Documentation: process: replace outdated LTS table w/ link
  tracing/histogram: Update document for KEYS_MAX size

Pull nfsd fix from Chuck Lever:

 - Fix a loop that occurs when using multiple net namespaces

* tag 'nfsd-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix net-namespace logic in __nfsd_file_cache_purge

If the namespace doesn't match the one in "net", then we'll continue,
but that doesn't cause another rhashtable_walk_next call, so it will
loop infinitely.

Fixes: ce502f81 ("NFSD: Convert the filecache to use rhashtable")
Reported-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/ltp/Y1%2FP8gDAcWC%2F+VR3@pevik/Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Merge tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull nolibc fixes from Paul McKenney:
 "This contains a couple of fixes for string-function bugs"

* tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/nolibc/string: Fix memcmp() implementation
  tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12

With SME we require that fine grained traps on access to TPIDR2_EL0 and
SMPRI_EL1 are disabled but did not document that fact. Add the relevant
register bits.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221101112716.52035-2-broonie@kernel.org

Pull kvm fixes from Paolo Bonzini:
 "x86:

   - fix lock initialization race in gfn-to-pfn cache (+selftests)

   - fix two refcounting errors

   - emulator fixes

   - mask off reserved bits in CPUID

   - fix bug with disabling SGX

  RISC-V:

   - update MAINTAINERS"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
  KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
  KVM: x86: emulator: update the emulation mode after CR0 write
  KVM: x86: emulator: update the emulation mode after rsm
  KVM: x86: emulator: introduce emulator_recalc_and_set_mode
  KVM: x86: emulator: em_sysexit should update ctxt->mode
  KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
  KVM: selftests: Add tests in xen_shinfo_test to detect lock races
  KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
  KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
  KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
  KVM: x86: Exempt pending triple fault from event injection sanity check
  MAINTAINERS: git://github -> https://github.com for kvm-riscv
  KVM: debugfs: Return retval of simple_attr_open() if it fails
  KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
  KVM: x86: Mask off reserved bits in CPUID.8000001FH
  KVM: x86: Mask off reserved bits in CPUID.8000001AH
  KVM: x86: Mask off reserved bits in CPUID.80000008H
  KVM: x86: Mask off reserved bits in CPUID.80000006H
  KVM: x86: Mask off reserved bits in CPUID.80000001H

Pull watchdog fixes from Wim Van Sebroeck:

 - fix use after free in exar driver

 - spelling fix in comment

* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
  drivers: watchdog: exar_wdt.c fix use after free
  watchdog: sp805_wdt: fix spelling typo in comment

The trapping of SMPRI_EL1 and TPIDR2_EL0 currently only really
work on nVHE, as only this mode uses the fine-grained trapping
that controls these two registers.

Move the trapping enable/disable code into
__{de,}activate_traps_common(), allowing it to be called when it
actually matters on VHE, and remove the flipping of EL2 control
for TPIDR2_EL0, which only affects the host access of this
register.

Fixes: 861262ab ("KVM: arm64: Handle SME host state when running guests")
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/86bkpqer4z.wl-maz@kernel.org

Pull btrfs fixes from David Sterba:
 "A few more fixes and regression fixes:

   - fix a corner case when handling tree-mod-log chagnes in reallocated
     notes

   - fix crash on raid0 filesystems created with <5.4 mkfs.btrfs that
     could lead to division by zero

   - add missing super block checksum verification after thawing
     filesystem

   - handle one more case in send when dealing with orphan files

   - fix parameter type mismatch for generation when reading dentry

   - improved error handling in raid56 code

   - better struct bio packing after recent cleanups"

* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't use btrfs_chunk::sub_stripes from disk
  btrfs: fix type of parameter generation in btrfs_get_dentry
  btrfs: send: fix send failure of a subcase of orphan inodes
  btrfs: make thaw time super block check to also verify checksum
  btrfs: fix tree mod log mishandling of reallocated nodes
  btrfs: reorder btrfs_bio for better packing
  btrfs: raid56: avoid double freeing for rbio if full_stripe_write() failed
  btrfs: raid56: properly handle the error when unable to find the missing stripe

Pull LSM fix from Paul Moore:
 "A single patch to the capabilities code to fix a potential memory leak
  in the xattr allocation error handling"

* tag 'lsm-pr-20221031' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  capabilities: fix potential memleak on error path from vfs_getxattr_alloc()

There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.

Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.

Fixes: 17601bfe ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com

Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.

Fixes: cab56b51 ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+

Pull fbdev fixes from Helge Deller:
 "A use-after-free bugfix in the smscufx driver and various minor error
  path fixes, smaller build fixes, sysfs fixes and typos in comments in
  the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
  drivers"

* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: cyber2000fb: fix missing pci_disable_device()
  fbdev: sisfb: use explicitly signed char
  fbdev: smscufx: Fix several use-after-free bugs
  fbdev: xilinxfb: Make xilinxfb_release() return void
  fbdev: sisfb: fix repeated word in comment
  fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
  fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
  fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
  fbdev: da8xx-fb: Fix error handling in .remove()
  fbdev: MIPS supports iomem addresses

Pull char/misc fixes from Greg KH:
 "Some small driver fixes for 6.1-rc3.  They include:

   - iio driver bugfixes

   - counter driver bugfixes

   - coresight bugfixes, including a revert and then a second fix to get
     it right.

  All of these have been in linux-next with no reported problems"

* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  misc: sgi-gru: use explicitly signed char
  coresight: cti: Fix hang in cti_disable_hw()
  Revert "coresight: cti: Fix hang in cti_disable_hw()"
  counter: 104-quad-8: Fix race getting function mode and direction
  counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  coresight: cti: Fix hang in cti_disable_hw()
  coresight: Fix possible deadlock with lock dependency
  counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
  iio: bmc150-accel-core: Fix unsafe buffer attributes
  iio: adxl367: Fix unsafe buffer attributes
  iio: adxl372: Fix unsafe buffer attributes
  iio: at91-sama5d2_adc: Fix unsafe buffer attributes
  iio: temperature: ltc2983: allocate iio channels once
  tools: iio: iio_utils: fix digit calculation
  iio: adc: stm32-adc: fix channel sampling time init
  iio: adc: mcp3911: mask out device ID in debug prints
  iio: adc: mcp3911: use correct id bits
  iio: adc: mcp3911: return proper error code on failure to allocate trigger
  iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
  ...

Pull USB fixes from Greg KH:
 "A few small USB fixes for 6.1-rc3. Include in here are:

   - MAINTAINERS update, including a big one for the USB gadget
     subsystem. Many thanks to Felipe for all of the years of hard work
     he has done on this codebase, it was greatly appreciated.

   - dwc3 driver fixes for reported problems.

   - xhci driver fixes for reported problems.

   - typec driver fixes for minor issues

   - uvc gadget driver change, and then revert as it wasn't relevant for
     6.1-final, as it is a new feature and people are still reviewing
     and modifying it.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Don't set IMI for no_interrupt
  usb: dwc3: gadget: Stop processing more requests on IMI
  Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
  xhci: Remove device endpoints from bandwidth list when freeing the device
  xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
  xhci: Add quirk to reset host back to default state at shutdown
  usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
  usb: dwc3: st: Rely on child's compatible instead of name
  usb: gadget: uvc: limit isoc_sg to super speed gadgets
  usb: bdc: change state when port disconnected
  usb: typec: ucsi: acpi: Implement resume callback
  usb: typec: ucsi: Check the connection on resume
  usb: gadget: aspeed: Fix probe regression
  usb: gadget: uvc: fix sg handling during video encode
  usb: gadget: uvc: fix sg handling in error case
  usb: gadget: uvc: fix dropped frame after missed isoc
  usb: dwc3: gadget: Don't delay End Transfer on delayed_status
  usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  MAINTAINERS: Update maintainers for broadcom USB
  MAINTAINERS: move USB gadget and phy entries under the main USB entry

Pull gpio fixes from Bartosz Golaszewski:

 - convert gpio-tegra to using an immutable irqchip

 - MAINTAINERS update

* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: Change myself to a maintainer
  gpio: tegra: Convert to immutable irq chip

Pull perf fixes from Borislav Petkov:

 - Rename a perf memory level event define to denote it is of CXL type

 - Add Alder and Raptor Lakes support to RAPL

 - Make sure raw sample data is output with tracepoints

* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
  perf/x86/rapl: Add support for Intel Raptor Lake
  perf/x86/rapl: Add support for Intel AlderLake-N
  perf: Fix missing raw data on tracepoint events

Merge tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Remove unused kernel stack padding, fix some build errors/warnings and
  two bugs in laptop platform driver"

* tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
  platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
  LoongArch: BPF: Avoid declare variables in switch-case
  LoongArch: Use flexible-array member instead of zero-length array
  LoongArch: Remove unused kernel stack padding

Pull cifs fixes from Steve French:

 - use after free fix for reconnect race

 - two memory leak fixes

* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix use-after-free caused by invalid pointer `hostname`
  cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
  cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()