WARNING: Possible unnecessary 'out of memory' message
+       if (!davinci_vc) {
+               dev_dbg(&pdev->dev,

total: 0 errors, 1 warnings, 154 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: space prohibited before that ',' (ctx:WxW)
+       da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);

total: 1 errors, 0 warnings, 290 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: suspect code indent for conditional statements (8, 24)
+       if (!i2c_safe_reg(reg))
+                       return regmap_read(da9052->regmap,

total: 0 errors, 1 warnings, 226 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

While we're at it, let's also match the MODULE_LICENSE with the header.

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: quoted string split across lines
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+             "Mike Rapoport <mike@compulab.co.il>");

total: 0 errors, 3 warnings, 574 lines checked

Cc: Support Opensource <support.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct resource *res;
+       res = platform_get_resource(pdev, IORESOURCE_IO, 0);

WARNING: char * array declaration might be better as static const
+       const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };

total: 0 errors, 2 warnings, 192 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

WARNING: Comparisons should place the constant on the right side of the test
+       BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);

total: 0 errors, 2 warnings, 731 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: code indent should use tabs where possible
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no space before tabs
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

WARNING: please, no spaces at the start of a line
+ ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$

total: 1 errors, 2 warnings, 366 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

ERROR: Macros with complex values should be enclosed in parentheses
+#define INIT_CDEX(_name, _rate)        \
+       [ASIC3_CLOCK_##_name] = {               \
+               .cdex = CLOCK_CDEX_##_name,     \
+               .rate = _rate,                  \
+       }

WARNING: line over 80 characters
+                                                           ASIC3_GPIO_INT_STATUS);

WARNING: void function return statements are not generally useful
+       return;
+}

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+       msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);
WARNING: line over 80 characters
+               asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p
r_err(...  to printk(KERN_ERR ...
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (asic == NULL) {
+               printk(KERN_ERR "kzalloc failed\n");

WARNING: Missing a blank line after declarations
+       int retval = 0;
+       retval = platform_driver_probe(&asic3_device_driver, asic3_probe);

total: 1 errors, 13 warnings, 1081 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+               if (!pdata) {
+                       dev_err(&client->dev, "Failed to allocate pdata\n");

WARNING: Possible unnecessary 'out of memory' message
+       if (!as3711) {
+               dev_err(&client->dev, "Memory allocation failed\n");

WARNING: line over 80 characters
+               dev_err(&client->dev, "regmap initialization failed: %d\n", ret);

WARNING: line over 80 characters
+       /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;

WARNING: line over 80 characters
+               as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);

total: 0 errors, 8 warnings, 236 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+       arizona_dev_exit(arizona);

total: 0 errors, 1 warnings, 120 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+                       msleep(5);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

total: 0 errors, 4 warnings, 1407 lines checked

Cc: patches@opensource.wolfsonmicro.com
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: please, no space before tabs
+ * ^IMike Rapoport <mike@compulab.co.il>$

WARNING: please, no space before tabs
+ * ^IEric Miao <eric.miao@marvell.com>$

WARNING: please, no space before tabs
+^I.id_table ^I= adp5520_id,$

total: 0 errors, 3 warnings, 365 lines checked

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: char * array declaration might be better as static const
+       static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then
 pr_info(...  to printk(KERN_INFO ...
+                       printk(KERN_INFO

WARNING: quoted string split across lines
+                              "Charger \"%s\" is connected with known battery."
+                              " Rebooting.\n",

WARNING: quoted string split across lines
+                                       "unable to set sysClkReq%dRfClkBuf: "
+                                       "%d\n", j + 1, ret);

total: 0 errors, 4 warnings, 199 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                        * not be accessed from here */

WARNING: Block comments use a trailing */ on a separate line
+                                * the output is wanted in any case */

WARNING: Consecutive strings are generally better as a single string
+               "  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",

total: 0 errors, 4 warnings, 3331 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Block comments use a trailing */ on a separate line
+        * */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 17))
+                       *offset = 24;

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 16))
+                       *offset = 25;

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((i == 3) && (*offset >= 24))
+                       *offset += 2;

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+               return -ENOSYS;

WARNING: static const char * array should probably be static const char * const
+       static const char *switch_off_status[] = {

WARNING: static const char * array should probably be static const char * const
+       static const char *turn_on_status[] = {

total: 0 errors, 9 warnings, 1867 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!otp) {
+               dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");

total: 0 errors, 1 warnings, 250 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Missing a blank line after declarations
+       struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+       if (!ab3100->startup_events_read)

WARNING: Possible unnecessary 'out of memory' message
+       if (!ab3100) {
+               dev_err(&client->dev, "could not allocate AB3100 device\n");

WARNING: else is not generally useful after a break or return
+                               break;
+                       } else {

total: 0 errors, 3 warnings, 996 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

WARNING: Possible unnecessary 'out of memory' message
+       if (!aat2870) {
+               dev_err(&client->dev,

total: 0 errors, 1 warnings, 524 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Checkpatch output:

WARNING: Block comments use a trailing */ on a separate line
+        * - turn off */

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&pm860x_driver);

total: 0 errors, 2 warnings, 1283 lines checked
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Specify the device tree binding for the input clocks to Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The mfd/s2mpa01.txt duplicates some of the information about bindings
with old mfd/s2mps11.txt. Now common part exists entirely in
mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s2mpa01.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The regulator/s5m8767-regulator.txt duplicates some of the information
about bindings with old mfd/s2mps11.txt. Now common part exists entirely
in mfd/samsung,sec-core.txt so:
 - add company prefix to file name (regulator/samsung,s5m8767.txt),
 - remove duplicated information,
 - reorganize the contents to match style of
   regulator/samsung,s2mps11.txt.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Bindings for Samsung S2M and S5M family PMICs are in mess. They are
spread over different files and subdirectories in a non-consistent way.
The devices and respective drivers for them share a lot in common so
everything could be organized in a more readable way.

Reorganize the S2MPS11/13/14/15 Device Tree bindings to match the
drivers for this family of devices:
 - move mfd/s2mps11.txt to mfd/samsung,sec-core.txt for the main MFD
   driver (common for entire family),
 - split clock block to clock/samsung,s2mps11.txt,
 - split regulator block to regulator/samsung,s2mps11.txt.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

This also start to propagate the negative error code from the
smbus call if there is one, as the last commit of this series
will make the gpiolib core deal with that properly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Update the device tree binding documentation to include the wlf,out-mono
property that is used to specify whether each output is a mono or stereo
output.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Add device tree bindings to support specifying outputs from the chip as
mono outputs. Whilst we are doing it change the out_mono pdata from a
bool to an int, because Sparse gets upset about using ARRAY_SIZE on
bools.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Allow support for the DA9063 PMIC to be modular, cfr. DA9062, which
allows to decrease size of multi-platform kernels (e.g.
multi_v7_defconfig).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Currently the driver requests the boot done and control interface IRQs
before it has requested its own IRQ line. This can cause problems on
edge triggered IRQ systems as if an edge occurs before the parent IRQ is
enabled it will be missed. Whilst we are changing the error handling
remove an unused label as well.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The CS47L24 and WM1831 codecs only have two GPIO lines, but are
otherwise similar to the WM8280.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The newly introduced as3722_i2c_suspend/resume functions are built
unconditionally, but only used when power management is enabled,
so we get a warning otherwise:

drivers/mfd/as3722.c:427:12: warning: 'as3722_i2c_suspend' defined but not used [-Wunused-function]
drivers/mfd/as3722.c:438:12: warning: 'as3722_i2c_resume' defined but not used [-Wunused-function]

This marks them both as __maybe_unused, which avoids an ugly #ifdef
and gives us best compile-time coverage. When they are unused, the
compiler will silently drop the functions from its output.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 35deff7e ("mfd: as3722: Handle interrupts on suspend")
Signed-off-by: Lee Jones <lee.jones@linaro.org>

These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Revision ID registers are available only on devices with
Slave IDs that are even, so don't make access to unavailable
registers.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
[sboyd@codeaurora.org: Consider all slave ids that are even]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

wm831x_unique_id_show currently displays an interesting pattern of '0'
and '3' characters which isn't very useful (figuring out why is left
as an exercise for the reader). Presumably "buf[i]" should have been
"id[i] & 0xff".

But while there, it is much simpler to simply use %phN and do all the
formatting at once.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>