- 02 Jun, 2015 40 commits
-
-
Tejun Heo authored
global_dirty_limits() calculates thresh and bg_thresh (confusingly called *pdirty and *pbackground in the function) assuming global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain_dirty_limits() which takes dirty_throttle_control out of global_dirty_limits(). As thresh and bg_thresh calculation needs the amount of dirtyable memory in the domain, dirty_throttle_control->avail is added. The new function calculates the two thresholds and store them directly in the dirty_throttle_control. Also, as memcg domains can't follow vm_dirty_bytes and dirty_background_bytes settings directly. If those are set and domain_dirty_limits() is invoked for a !global domain, the settings are translated to ratios by scaling them against globally available memory. dirty_throttle_control->gdtc is added to enable this when CONFIG_CGROUP_WRITEBACK. global_dirty_limits() is now a thin wrapper around domain_dirty_limits() and balance_dirty_pages() is updated to use the new function too. This patch doesn't introduce any behavioral changes. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Tejun Heo authored
Currently __wb_writeout_inc() and hard_dirty_limit() assume global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch separates out domain-specific part of __wb_writeout_inc() into wb_domain_writeout_inc() which takes wb_domain as a parameter and adds the parameter to hard_dirty_limit(). This will allow these two functions to handle per-memcg wb_domains. This patch doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
Currently all dirty throttle operations use global_wb_domain; however, cgroup writeback support requires considering per-memcg wb_domain too. This patch adds dirty_throttle_control->dom and updates functions which are directly using globabl_wb_domain to use it instead. As this makes global_update_bandwidth() a misnomer, the function is renamed to domain_update_bandwidth(). This patch doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
wb->completions measures the wb's proportional write bandwidth in global_wb_domain and thus naturally tied to the wb_domain. This patch adds dirty_throttle_control->wb_completions which is initialized to wb->completions by GDTC_INIT() and updates __wb_dirty_limits() to use it instead of dereferencing wb->completions directly. This will allow dirty_throttle_control to represent different wb_domains and the matching wb completions. This patch doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
wb_position_ratio() is used to calculate pos_ratio, which is used for two purposes. wb_update_dirty_ratelimit() uses it to adjust wb->[balanced_]dirty_ratelimit gradually and balance_dirty_pages() to immediately adjust dirty_ratelimit right before applying it to determine pause duration. While wb_update_dirty_ratelimit() is separately rate limited from balance_dirty_pages(), on the run where the ratelimit is updated, we end up calculating pos_ratio twice with the same parameters. This patch adds dirty_throttle_control->pos_ratio. balance_dirty_pages() calculates it once per run and wb_update_dirty_ratelimit() uses the value stored in dirty_throttle_control. This removes the duplicate calculation and also will help implementing memcg wb_domain. Signed-off-by:
-
Tejun Heo authored
wb_calc_thresh() calculates wb_thresh by scaling thresh according to the wb's portion in the system-wide write bandwidth. cgroup writeback support would need to calculate wb_thresh against memcg domain too. This patch renames wb_calc_thresh() to __wb_calc_thresh() and makes it take dirty_throttle_control so that the function can later be updated to calculate against different domains according to dirty_throttle_control. wb_calc_thresh() is now a thin wrapper around __wb_calc_thresh(). v2: The original version was incorrectly scaling dtc->dirty instead of dtc->thresh. This was due to the extremely confusing function and variable names. Added a rename patch and fixed this one. Signed-off-by: -
Tejun Heo authored
wb_bg_thresh is currently treated as a second-class citizen. It's only used when BDI_CAP_STRICTLIMIT is set and balance_dirty_pages() doesn't calculate it unless the cap is set. When the cap is set, the calculated value is not passed around but instead recalculated whenever it's used. wb_position_ratio() calculates it by scaling wb_thresh proportional to bg_thresh / thresh. wb_update_dirty_ratelimit() uses wb_dirty_limit() on bg_thresh, which should generally lead to a similar result as the proportional scaling but can also be way off in the presence of max/min_ratio settings. Avoiding wb_bg_thresh calculation saves us one u64 multiplication and divsion when BDI_CAP_STRICTLIMIT is not set. Given that balance_dirty_pages() is already ratelimited, this doesn't justify the incurred extra complexity. This patch adds wb_bg_thresh to dirty_throttle_control and makes wb_dirty_limits() always calculate it and updates the users to use the pre-calculated value. Signed-off-by:
-
Tejun Heo authored
Dirty throttling implemented in balance_dirty_pages() and its subroutines makes use of a number of parameters which are passed around individually. This renders these functions somewhat unwieldy and makes it difficult to add or change the involved parameters. Also some functions use different or conflicting naming schemes for the same parameters making the code confusing to follow. This patch consolidates the main parameters into struct dirty_throttle_control so that they can be passed around easily and adding new paramters isn't painful. This also unifies how a given parameter is named and accessed. The drawback of using this type of control structure rather than explicit paramters is that it isn't immediately obvious which function accesses and modifies what; however, it's fairly clear that the benefits outweigh in this case. GDTC_INIT() macro is provided to ease initializing dirty_throttle_control for the global_wb_domain and balance_dirty_pages() uses a separate pointer to point to its global dirty_throttle_control. This is to make it uniform with memcg domain handling which will be added later. This patch doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
This patch is a part of the series to define wb_domain which represents a domain that wb's (bdi_writeback's) belong to and are measured against each other in. This will enable IO backpressure propagation for cgroup writeback. global_dirty_limit exists to regulate the global dirty threshold which is a property of the wb_domain. This patch moves hard_dirty_limit, dirty_lock, and update_time into wb_domain. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
Dirtyable memory is distributed to a wb (bdi_writeback) according to the relative bandwidth the wb is writing out in the whole system. This distribution is global - each wb is measured against all other wb's and gets the proportinately sized portion of the memory in the whole system. For cgroup writeback, the amount of dirtyable memory is scoped by memcg and thus each wb would need to be measured and controlled in its memcg. IOW, a wb will belong to two writeback domains - the global and memcg domains. Currently, what constitutes the global writeback domain are scattered across a number of global states. This patch starts collecting them into struct wb_domain. * fprop_global which serves as the basis for proportional bandwidth measurement and its period timer are moved into struct wb_domain. * global_wb_domain hosts the states for the global domain. * While at it, flatten wb_writeout_fraction() into its callers. This thin wrapper doesn't provide any actual benefits while getting in the way. This is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
__wb_update_bandwidth() is called from two places - fs/fs-writeback.c::balance_dirty_pages() and mm/page-writeback.c::wb_writeback(). The latter updates only the write bandwidth while the former also deals with the dirty ratelimit. The two callsites are distinguished by whether @thresh parameter is zero or not, which is cryptic. In addition, the two files define their own different versions of wb_update_bandwidth() on top of __wb_update_bandwidth(), which is confusing to say the least. This patch cleans up [__]wb_update_bandwidth() in the following ways. * __wb_update_bandwidth() now takes explicit @update_ratelimit parameter to gate dirty ratelimit handling. * mm/page-writeback.c::wb_update_bandwidth() is flattened into its caller - balance_dirty_pages(). * fs/fs-writeback.c::wb_update_bandwidth() is moved to mm/page-writeback.c and __wb_update_bandwidth() is made static. * While at it, add a lockdep assertion to __wb_update_bandwidth(). Except for the lockdep addition, this is pure reorganization and doesn't introduce any behavioral changes. Signed-off-by:
-
Tejun Heo authored
The function name wb_dirty_limit(), its argument @dirty and the local variable @wb_dirty are mortally confusing given that the function calculates per-wb threshold value not dirty pages, especially given that @dirty and @wb_dirty are used elsewhere for dirty pages. Let's rename the function to wb_calc_thresh() and wb_dirty to wb_thresh. Signed-off-by:
-
Tejun Heo authored
cpu_possible_mask represents the CPUs which are actually possible during that boot instance. For systems which don't support CPU hotplug, this will match cpu_online_mask exactly in most cases. Even for systems which support CPU hotplug, the number of possible CPU slots is highly unlikely to diverge greatly from the number of online CPUs. The only cases where the difference between possible and online caused problems were when the boot code failed to initialize the possible mask and left it fully set at NR_CPUS - 1. As such, most per-cpu constructs allocate for all possible CPUs and often iterate over the possibles, which also has the benefit of avoiding the blocking CPU hotplug synchronization. memcg open codes per-cpu stat counting for mem_cgroup_read_stat() and mem_cgroup_read_events(), which iterates over online CPUs and handles CPU hotplug operations explicitly. This complexity doesn't actually buy anything. Switch to iterating over the possibles and drop the explicit CPU hotplug handling. Eventually, we want to convert memcg to use percpu_counter instead of its own custom implementation which also benefits from quick access w/o summing for cases where larger error margin is acceptable. This will allow mem_cgroup_read_stat() to be called from non-sleepable contexts which will be used by cgroup writeback. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Tejun Heo authored
Writeback now supports cgroup writeback and the generic writeback, buffer, libfs, and mpage helpers that ext2 uses are all updated to work with cgroup writeback. This patch enables cgroup writeback for ext2 by adding FS_CGROUP_WRITEBACK to its ->fs_flags. Signed-off-by:
-
Tejun Heo authored
__mpage_writepage() is used to implement mpage_writepages() which in turn is used for ->writepages() of various filesystems. All writeback logic is now updated to handle cgroup writeback and the block cgroup to issue IOs for is encoded in writeback_control and can be retrieved from the inode; however, __mpage_writepage() currently ignores the blkcg indicated by the inode and issues all bio's without explicit blkcg association. This patch updates __mpage_writepage() so that the issued bio's are associated with inode_to_writeback_blkcg_css(inode). v2: Updated for per-inode wb association. Signed-off-by:
-
Tejun Heo authored
[__]block_write_full_page() is used to implement ->writepage in various filesystems. All writeback logic is now updated to handle cgroup writeback and the block cgroup to issue IOs for is encoded in writeback_control and can be retrieved from the inode; however, [__]block_write_full_page() currently ignores the blkcg indicated by inode and issues all bio's without explicit blkcg association. This patch adds submit_bh_blkcg() which associates the bio with the specified blkio cgroup before issuing and uses it in __block_write_full_page() so that the issued bio's are associated with inode_to_wb_blkcg_css(inode). v2: Updated for per-inode wb association. Signed-off-by:
-
Tejun Heo authored
__mark_inode_dirty() always dirtied the inode against the root wb (bdi_writeback). The previous patches added all the infrastructure necessary to attribute an inode against the wb of the dirtying cgroup. This patch updates __mark_inode_dirty() so that it uses the wb associated with the inode instead of unconditionally using the root one. Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being dirtied against the root wb. v2: Updated for per-inode wb association. Signed-off-by:
-
Tejun Heo authored
[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only handle dirty inodes on the root wb (bdi_writeback) of the target bdi. This patch implements bdi_split_work_to_wbs() and use it to make these functions handle multiple wb's. bdi_split_work_to_wbs() takes a base wb_writeback_work and create clones of it and issue them to the wb's of the target bdi. The base work's nr_pages is distributed using wb_split_bdi_pages() - ie. according to each wb's write bandwidth's proportion in the bdi. Cloning a bdi involves memory allocation which may fail. In such cases, bdi_split_work_to_wbs() issues the base work directly and waits for its completion before proceeding to the next wb to guarantee forward progress and correctness under memory pressure. Signed-off-by:
-
Tejun Heo authored
try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it handles s_umount locking and skips if writeback is already in progress. The in progress test is performed on the root wb (bdi_writeback) which isn't sufficient for cgroup writeback support. The test must be done per-wb. To prepare for the change, this patch factors out __writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds @skip_if_busy and moves the in progress test right before queueing the wb_writeback_work. try_writeback_inodes_sb_nr() now just grabs s_umount and invokes __writeback_inodes_sb_nr() with asserted @skip_if_busy. This way, later addition of multiple wb handling can skip only the wb's which already have writeback in progress. This swaps the order between in progress test and s_umount test which can flip the return value when writeback is in progress and s_umount is being held by someone else but this shouldn't cause any meaningful difference. It's a fringe condition and the return value is an unsynchronized hint anyway. Signed-off-by:
-
Tejun Heo authored
For cgroup writeback, multiple wb_writeback_work items may need to be issuedto accomplish a single task. The previous patch updated the waiting mechanism such that wb_wait_for_completion() can wait for multiple work items. Issuing mulitple work items involves memory allocation which may fail. As most writeback operations can't fail or blocked on memory allocation, in such cases, we'll fall back to sequential issuing of an on-stack work item, which would need to be waited upon sequentially. This patch implements wb_wait_for_single_work() which waits for a single work item independently from wb_completion waiting so that such fallback mechanism can be used without getting tangled with the usual issuing / completion operation. Signed-off-by:
-
Tejun Heo authored
If the completion of a wb_writeback_work can be waited upon by setting its ->done to a struct completion and waiting on it; however, for cgroup writeback support, it's necessary to issue multiple work items to multiple bdi_writebacks and wait for the completion of all. This patch implements wb_completion which can wait for multiple work items and replaces the struct completion with it. It can be defined using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and waited for by wb_wait_for_completion(). Nobody currently issues multiple work items and this patch doesn't introduce any behavior changes. Signed-off-by:
-
Tejun Heo authored
Currently, a wb_writeback_work is freed automatically on completion if it doesn't have ->done set. Add wb_writeback_work->auto_free to make the switch explicit. This will help cgroup writeback support where waiting for completion and whether to free automatically don't necessarily move together. Signed-off-by:
-
Tejun Heo authored
wakeup_dirtytime_writeback() currently only starts writeback on the root wb (bdi_writeback). For cgroup writeback support, update the function to check all wbs. Signed-off-by:
-
Tejun Heo authored
wakeup_flusher_threads() currently only starts writeback on the root wb (bdi_writeback). For cgroup writeback support, update the function to wake up all wbs and distribute the number of pages to write according to the proportion of each wb's write bandwidth, which is implemented in wb_split_bdi_pages(). Signed-off-by:
-
Tejun Heo authored
bdi_start_background_writeback() currently takes @bdi and kicks the root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. This patch doesn't make any functional difference. Signed-off-by:
-
Tejun Heo authored
writeback_in_progress() currently takes @bdi and returns whether writeback is in progress on its root wb (bdi_writeback). In preparation for cgroup writeback support, make it take wb instead. While at it, make it an inline function. This patch doesn't make any functional difference. Signed-off-by:
-
Tejun Heo authored
For cgroup writeback support, all bdi-wide operations should be distributed to all its wb's (bdi_writeback's). This patch updates laptop_mode_timer_fn() so that it invokes wb_start_writeback() on all wb's rather than just the root one. As the intent is writing out all dirty data, there's no reason to split the number of pages to write. Signed-off-by:
-
Tejun Heo authored
bdi_start_writeback() is a thin wrapper on top of __wb_start_writeback() which is used only by laptop_mode_timer_fn(). This patches removes bdi_start_writeback(), renames __wb_start_writeback() to wb_start_writeback() and makes laptop_mode_timer_fn() use it instead. This doesn't cause any functional difference and will ease making laptop_mode_timer_fn() cgroup writeback aware. Signed-off-by:
-
Tejun Heo authored
This will be used to implement bdi-wide operations which should be distributed across all its cgroup bdi_writebacks. Signed-off-by:
-
Tejun Heo authored
bdi->min/max_ratio are user-configurable per-bdi knobs which regulate dirty limit of each bdi. For cgroup writeback, they need to be further distributed across wb's (bdi_writeback's) belonging to the configured bdi. This patch introduces wb_min_max_ratio() which distributes bdi->min/max_ratio according to a wb's proportion in the total active bandwidth of its bdi. v2: Update wb_min_max_ratio() to fix a bug where both min and max were assigned the min value and avoid calculations when possible. Signed-off-by: -
Tejun Heo authored
There are several places in fs/fs-writeback.c which queues wb_writeback_work without checking whether the target wb (bdi_writeback) has dirty inodes or not. The only thing wb_writeback_work does is writing back the dirty inodes for the target wb and queueing a work item for a clean wb is essentially noop. There are some side effects such as bandwidth stats being updated and triggering tracepoints but these don't affect the operation in any meaningful way. This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb() skip wb_queue_work() if the target bdi is clean. Also, it moves dirtiness check from wakeup_flusher_threads() to __wb_start_writeback() so that all its callers benefit from the check. While the overhead incurred by scheduling a noop work isn't currently significant, the overhead may be higher with cgroup writeback support as we may end up issuing noop work items to a lot of clean wb's. Signed-off-by:
-
Tejun Heo authored
bdi_has_dirty_io() used to only reflect whether the root wb (bdi_writeback) has dirty inodes. For cgroup writeback support, it needs to take all active wb's into account. If any wb on the bdi has dirty inodes, bdi_has_dirty_io() should return true. To achieve that, as inode_wb_list_{move|del}_locked() now keep track of the dirty state transition of each wb, the number of dirty wbs can be counted in the bdi; however, bdi is already aggregating wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when there are any dirty inodes by ensuring wb->avg_write_bandwidth can't dip below 1. bdi_has_dirty_io() can simply test whether bdi->tot_write_bandwidth is zero or not. While this bumps the value of wb->avg_write_bandwidth to one when it used to be zero, this shouldn't cause any meaningful behavior difference. bdi_has_dirty_io() is made an inline function which tests whether ->tot_write_bandwidth is non-zero. Also, WARN_ON_ONCE()'s on its value are added to inode_wb_list_{move|del}_locked(). Signed-off-by: -
Tejun Heo authored
cgroup writeback support needs to keep track of the sum of avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to distribute write workload. This patch adds bdi->tot_write_bandwidth and updates inode_wb_list_move_locked(), inode_wb_list_del_locked() and wb_update_write_bandwidth() to adjust it as wb's gain and lose dirty inodes and its avg_write_bandwidth gets updated. As the update events are not synchronized with each other, bdi->tot_write_bandwidth is an atomic_long_t. Signed-off-by:
-
Tejun Heo authored
Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback) has any dirty inode by testing all three IO lists on each invocation without actively keeping track. For cgroup writeback support, a single bdi will host multiple wb's each of which will host dirty inodes separately and we'll need to make bdi_has_dirty_io(), which currently only represents the root wb, aggregate has_dirty_io from all member wb's, which requires tracking transitions in has_dirty_io state on each wb. This patch introduces inode_wb_list_{move|del}_locked() to consolidate IO list operations leaving queue_io() the only other function which directly manipulates IO lists (via move_expired_inodes()). All three functions are updated to call wb_io_lists_[de]populated() which keep track of whether the wb has dirty inodes or not and record it using the new WB_has_dirty_io flag. inode_wb_list_moved_locked()'s return value indicates whether the wb had no dirty inodes before. mark_inode_dirty() is restructured so that the return value of inode_wb_list_move_locked() can be used for deciding whether to wake up the wb. While at it, change {bdi|wb}_has_dirty_io()'s return values to bool. These functions were returning 0 and 1 before. Also, add a comment explaining the synchronization of wb_state flags. v2: Updated to accommodate b_dirty_time. Signed-off-by: -
Tejun Heo authored
In several places, bdi_congested() and its wrappers are used to determine whether more IOs should be issued. With cgroup writeback support, this question can't be answered solely based on the bdi (backing_dev_info). It's dependent on whether the filesystem and bdi support cgroup writeback and the blkcg the inode is associated with. This patch implements inode_congested() and its wrappers which take @inode and determines the congestion state considering cgroup writeback. The new functions replace bdi_*congested() calls in places where the query is about specific inode and task. There are several filesystem users which also fit this criteria but they should be updated when each filesystem implements cgroup writeback support. v2: Now that a given inode is associated with only one wb, congestion state can be determined independent from the asking task. Drop @task. Spotted by Vivek. Also, converted to take @inode instead of @mapping and renamed to inode_congested(). Signed-off-by: -
Tejun Heo authored
Now that bdi layer can handle per-blkcg bdi_writeback_congested state, blk_{set|clear}_congested() can propagate non-root blkcg congestion state to them. This can be easily achieved by disabling the root_rl tests in blk_{set|clear}_congested(). Note that we still need those tests when !CONFIG_CGROUP_WRITEBACK as otherwise we'll end up flipping root blkcg wb's congestion state for events happening on other blkcgs. v2: Updated for bdi_writeback_congested. Signed-off-by: -
Tejun Heo authored
blk_{set|clear}_queue_congested() take @q and set or clear, respectively, the congestion state of its bdi's root wb. Because bdi used to be able to handle congestion state only on the root wb, the callers of those functions tested whether the congestion is on the root blkcg and skipped if not. This is cumbersome and makes implementation of per cgroup bdi_writeback congestion state propagation difficult. This patch renames blk_{set|clear}_queue_congested() to blk_{set|clear}_congested(), and makes them take request_list instead of request_queue and test whether the specified request_list is the root one before updating bdi_writeback congestion state. This makes the tests in the callers unnecessary and simplifies them. As there are no external users of these functions, the definitions are moved from include/linux/blkdev.h to block/blk-core.c. This patch doesn't introduce any noticeable behavior difference. Signed-off-by: -
Tejun Heo authored
Currently, all congestion functions take bdi (backing_dev_info) and always operate on the root wb (bdi->wb) and the congestion state from the block layer is propagated only for the root blkcg. This patch introduces {set|clear}_wb_congested() and wb_congested() which take a bdi_writeback_congested and bdi_writeback respectively. The bdi counteparts are now wrappers invoking the wb based functions on @bdi->wb. While converting clear_bdi_congested() to clear_wb_congested(), the local variable declaration order between @wqh and @bit is swapped for cosmetic reason. This patch just adds the new wb based functions. The following patches will apply them. v2: Updated for bdi_writeback_congested. Signed-off-by:Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tejun Heo authored
Currently, balance_dirty_pages() always work on bdi->wb. This patch updates it to work on the wb (bdi_writeback) matching memcg and blkcg of the current task as that's what the inode is being dirtied against. balance_dirty_pages_ratelimited() now pins the current wb and passes it to balance_dirty_pages(). As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by:
-
Tejun Heo authored
Until now, all WB_* stats were accounted against the root wb (bdi_writeback), now that multiple wb (bdi_writeback) support is in place, let's attributes the stats to the respective per-cgroup wb's. As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to visible behavior differences. v2: Updated for per-inode wb association. Signed-off-by:
-
