These kind of registers include PMEVTYPERn, PMCCFILTR and PMXEVTYPER
which is mapped to PMEVTYPERn or PMCCFILTR.

The access handler translates all aarch32 register offsets to aarch64
ones and uses vcpu_sys_reg() to access their values to avoid taking care
of big endian.

When writing to these registers, create a perf_event for the selected
event type.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

When we use tools like perf on host, perf passes the event type and the
id of this event type category to kernel, then kernel will map them to
hardware event number and write this number to PMU PMEVTYPER<n>_EL0
register. When getting the event number in KVM, directly use raw event
type to create a perf_event for it.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use
reset_unknown for its reset handler. Add a handler to emulate writing
PMCNTENSET or PMCNTENCLR register.

When writing to PMCNTENSET, call perf_event_enable to enable the perf
event. When writing to PMCNTENCLR, call perf_event_disable to disable
the perf event.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which
is mapped to PMEVCNTRn.

The access handler translates all aarch32 register offsets to aarch64
ones and uses vcpu_sys_reg() to access their values to avoid taking care
of big endian.

When reading these registers, return the sum of register value and the
value perf event counts.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Add access handler which gets host value of PMCEID0 or PMCEID1 when
guest access these registers. Writing action to PMCEID0 or PMCEID1 is
UNDEFINED.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Since the reset value of PMSELR_EL0 is UNKNOWN, use reset_unknown for
its reset handler. When reading PMSELR, return the PMSELR.SEL field to
guest.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Add reset handler which gets host value of PMCR_EL0 and make writable
bits architecturally UNKNOWN except PMCR.E which is zero. Add an access
handler for PMCR.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Here we plan to support virtual PMU for guest by full software
emulation, so define some basic structs and functions preparing for
futher steps. Define struct kvm_pmc for performance monitor counter and
struct kvm_pmu for performance monitor unit for each vcpu. According to
ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS)
counters.

Since this only supports ARM64 (or PMUv3), add a separate config symbol
for it.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to merge the KVM/ARM PMU patches without creating a
conflict mess, let's have a temporary include file that won't
conflict with anything. Subsequent patches will clean that up.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to ease the merge with the rest of the arm64 tree, move the
definition of __cpu_init_stage2() after what will be the new kvm_call_hyp.
Hopefully the resolution of the merge conflict will be obvious.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Using the common HYP timer code is a bit more tricky, since we
use system register names. Nothing a set of macros cannot
work around...
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

No need to keep our own private version, the common one is
strictly identical.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to be able to use the code located in virt/kvm/arm/hyp,
we need to make the global hyp.h file accessible from include/asm,
similar to what we did for arm64.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

We already have virt/kvm/arm/ containing timer and vgic stuff.
Add yet another subdirectory to contain the hyp-specific files
(timer and vgic again).
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to be able to move code outside of kvm/hyp, we need to make
the global hyp.h file accessible from a standard location.

include/asm/kvm_hyp.h seems good enough.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With ARMv8.1 VHE, the architecture is able to (almost) transparently
run the kernel at EL2, despite being written for EL1.

This patch takes care of the "almost" part, mostly preventing the kernel
from dropping from EL2 to EL1, and setting up the HYP configuration.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With VHE, we place kernel {watch,break}-points at EL2 to get things
like kgdb and "perf -e mem:..." working.

This requires a bit of repainting in the low-level encore/decode,
but is otherwise pretty simple.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

When the kernel is running in HYP (with VHE), it is necessary to
include EL2 events if the user requests counting kernel or
hypervisor events.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The fault decoding process (including computing the IPA in the case
of a permission fault) would be much better done in C code, as we
have a reasonable infrastructure to deal with the VHE/non-VHE
differences.

Let's move the whole thing to C, including the workaround for
erratum 834220, and just patch the odd ESR_EL2 access remaining
in hyp-entry.S.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

As the kernel fully runs in HYP when VHE is enabled, we can
directly branch to the kernel's panic() implementation, and
not perform an exception return.

Add the alternative code to deal with this.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Despite the fact that a VHE enabled kernel runs at EL2, it uses
CPACR_EL1 to trap FPSIMD access. Add the required alternative
code to re-enable guest FPSIMD access when it has trapped to
EL2.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Switch the timer code to the unified sysreg accessors.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Running the kernel in HYP mode requires the HCR_E2H bit to be set
at all times, and the HCR_TGE bit to be set when running as a host
(and cleared when running as a guest). At the same time, the vector
 must be set to the current role of the kernel (either host or
hypervisor), and a couple of system registers differ between VHE
and non-VHE.

We implement these by using another set of alternate functions
that get dynamically patched.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

As non-VHE and VHE have different ways to express the trapping of
FPSIMD registers to EL2, make __fpsimd_enabled a patchable predicate
and provide a VHE implementation.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

We're now in a position where we can introduce VHE's minimal
save/restore, which is limited to the handful of shared sysregs.

Add the required alternative function calls that result in a
"do nothing" call on VHE, and the normal save/restore for non-VHE.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Use the recently introduced unified system register accessors for
those sysregs that behave differently depending on VHE being in
use or not.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

A handful of system registers are still shared between host and guest,
even while using VHE (tpidr*_el[01] and actlr_el1).

Also, some of the vcpu state (sp_el0, PC and PSTATE) must be
save/restored on entry/exit, as they are used on the host as well.

In order to facilitate the introduction of a VHE-specific sysreg
save/restore, make move the access to these registers to their
own save/restore functions.

No functional change.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With ARMv8, host and guest share the same system register file,
making the save/restore procedure completely symetrical.
With VHE, host and guest now have different requirements, as they
use different sysregs.

In order to prepare for this, add split sysreg save/restore functions
for both host and guest. No functional changes yet.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

VHE brings its own bag of new system registers, or rather system
register accessors, as it define new ways to access both guest
and host system registers. For example, from the host:

- The host TCR_EL2 register is accessed using the TCR_EL1 accessor
- The guest TCR_EL1 register is accessed using the TCR_EL12 accessor

Obviously, this is confusing. A way to somehow reduce the complexity
of writing code for both ARMv8 and ARMv8.1 is to use a set of unified
accessors that will generate the right sysreg, depending on the mode
the CPU is running in. For example:

- read_sysreg_el1(tcr) will use TCR_EL1 on ARMv8, and TCR_EL12 on
  ARMv8.1 with VHE.
- read_sysreg_el2(tcr) will use TCR_EL2 on ARMv8, and TCR_EL1 on
  ARMv8.1 with VHE.

We end up with three sets of accessors ({read,write}_sysreg_el[012])
that can be directly used from C code. We take this opportunity to
also add the definition for the new VHE sysregs.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The kern_hyp_va macro is pretty meaninless with VHE, as there is
only one mapping - the kernel one.

In order to keep the code readable and efficient, use runtime
patching to replace the 'and' instruction used to compute the VA
with a 'nop'.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With VHE, the host never issues an HVC instruction to get into the
KVM code, as we can simply branch there.

Use runtime code patching to simplify things a bit.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With the kernel running at EL2, there is no point trying to
configure page tables for HYP, as the kernel is already mapped.

Take this opportunity to refactor the whole init a bit, allowing
the various parts of the hypervisor bringup to be split across
multiple functions.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Add a new ARM64_HAS_VIRT_HOST_EXTN features to indicate that the
CPU has the ARMv8.1 VHE capability.

This will be used to trigger kernel patching in KVM.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With the ARMv8.1 VHE, the kernel can run in HYP mode, and thus
use the HYP timer instead of the normal guest timer in a mostly
transparent way, except for the interrupt line.

This patch reworks the arch timer code to allow the selection of
the HYP PPI, possibly falling back to the guest timer if not
available.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

With ARMv8.1 VHE extension, it will be possible to run the kernel
at EL2 (aka HYP mode). In order for the kernel to easily find out
where it is running, add a new predicate that returns whether or
not the kernel is in HYP mode.

For completeness, the 32bit code also get such a predicate (always
returning false) so that code common to both architecture (timers,
KVM) can use it transparently.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

There is no real need to leave the stage2 initialization as part
of the early HYP bootstrap, and we can easily postpone it to
the point where we can safely run C code.

This will help VHE, which doesn't need any of this bootstrap.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

So far, our handling of cache maintenance by VA has been pretty
simple: Either the access is in the guest RAM and generates a S2
fault, which results in the page being mapped RW, or we go down
the io_mem_abort() path, and nuke the guest.

The first one is fine, but the second one is extremely weird.
Treating the CM as an I/O is wrong, and nothing in the ARM ARM
indicates that we should generate a fault for something that
cannot end-up in the cache anyway (even if the guest maps it,
it will keep on faulting at stage-2 for emulation).

So let's just skip this instruction, and let the guest get away
with it.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

I have no idea what these were for - probably a leftover from an
early implementation. Good bye!
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

These are now handled as a panic, so there is little point in
keeping them around.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This field was never populated, and the panic code already
does something similar. Delete the related code.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>