Increase kasan instrumented kernel stack size from 32k to 64k. Other
architectures seems to get away with just doubling kernel stack size under
kasan, but on s390 this appears to be not enough due to bigger frame size.
The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE
vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting
stack overflow is fs sync on xfs filesystem:

 #0 [9a0681e8]  704 bytes  check_usage at 34b1fc
 #1 [9a0684a8]  432 bytes  check_usage at 34c710
 #2 [9a068658]  1048 bytes  validate_chain at 35044a
 #3 [9a068a70]  312 bytes  __lock_acquire at 3559fe
 #4 [9a068ba8]  440 bytes  lock_acquire at 3576ee
 #5 [9a068d60]  104 bytes  _raw_spin_lock at 21b44e0
 #6 [9a068dc8]  1992 bytes  enqueue_entity at 2dbf72
 #7 [9a069590]  1496 bytes  enqueue_task_fair at 2df5f0
 #8 [9a069b68]  64 bytes  ttwu_do_activate at 28f438
 #9 [9a069ba8]  552 bytes  try_to_wake_up at 298c4c
 #10 [9a069dd0]  168 bytes  wake_up_worker at 23f97c
 #11 [9a069e78]  200 bytes  insert_work at 23fc2e
 #12 [9a069f40]  648 bytes  __queue_work at 2487c0
 #13 [9a06a1c8]  200 bytes  __queue_delayed_work at 24db28
 #14 [9a06a290]  248 bytes  mod_delayed_work_on at 24de84
 #15 [9a06a388]  24 bytes  kblockd_mod_delayed_work_on at 153e2a0
 #16 [9a06a3a0]  288 bytes  __blk_mq_delay_run_hw_queue at 158168c
 #17 [9a06a4c0]  192 bytes  blk_mq_run_hw_queue at 1581a3c
 #18 [9a06a580]  184 bytes  blk_mq_sched_insert_requests at 15a2192
 #19 [9a06a638]  1024 bytes  blk_mq_flush_plug_list at 1590f3a
 #20 [9a06aa38]  704 bytes  blk_flush_plug_list at 1555028
 #21 [9a06acf8]  320 bytes  schedule at 219e476
 #22 [9a06ae38]  760 bytes  schedule_timeout at 21b0aac
 #23 [9a06b130]  408 bytes  wait_for_common at 21a1706
 #24 [9a06b2c8]  360 bytes  xfs_buf_iowait at fa1540
 #25 [9a06b430]  256 bytes  __xfs_buf_submit at fadae6
 #26 [9a06b530]  264 bytes  xfs_buf_read_map at fae3f6
 #27 [9a06b638]  656 bytes  xfs_trans_read_buf_map at 10ac9a8
 #28 [9a06b8c8]  304 bytes  xfs_btree_kill_root at e72426
 #29 [9a06b9f8]  288 bytes  xfs_btree_lookup_get_block at e7bc5e
 #30 [9a06bb18]  624 bytes  xfs_btree_lookup at e7e1a6
 #31 [9a06bd88]  2664 bytes  xfs_alloc_ag_vextent_near at dfa070
 #32 [9a06c7f0]  144 bytes  xfs_alloc_ag_vextent at dff3ca
 #33 [9a06c880]  1128 bytes  xfs_alloc_vextent at e05fce
 #34 [9a06cce8]  584 bytes  xfs_bmap_btalloc at e58342
 #35 [9a06cf30]  1336 bytes  xfs_bmapi_write at e618de
 #36 [9a06d468]  776 bytes  xfs_iomap_write_allocate at ff678e
 #37 [9a06d770]  720 bytes  xfs_map_blocks at f82af8
 #38 [9a06da40]  928 bytes  xfs_writepage_map at f83cd6
 #39 [9a06dde0]  320 bytes  xfs_do_writepage at f85872
 #40 [9a06df20]  1320 bytes  write_cache_pages at 73dfe8
 #41 [9a06e448]  208 bytes  xfs_vm_writepages at f7f892
 #42 [9a06e518]  88 bytes  do_writepages at 73fe6a
 #43 [9a06e570]  872 bytes  __writeback_single_inode at a20cb6
 #44 [9a06e8d8]  664 bytes  writeback_sb_inodes at a23be2
 #45 [9a06eb70]  296 bytes  __writeback_inodes_wb at a242e0
 #46 [9a06ec98]  928 bytes  wb_writeback at a2500e
 #47 [9a06f038]  848 bytes  wb_do_writeback at a260ae
 #48 [9a06f388]  536 bytes  wb_workfn at a28228
 #49 [9a06f5a0]  1088 bytes  process_one_work at 24a234
 #50 [9a06f9e0]  1120 bytes  worker_thread at 24ba26
 #51 [9a06fe40]  104 bytes  kthread at 26545a
 #52 [9a06fea8]             kernel_thread_starter at 21b6b62

To be able to increase the stack size to 64k reuse LLILL instruction
in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE
(65192) value as unsigned.
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Previously, the attribute entry for diagnostic sampling was added
if authorized.  Otherwise, the array of struct attribute contains
two NULL values.

Change this logic and reserve space for the attribute for diagnostic
sampling. If diagnostic sampling is authorized, add an entry in the
respective position in the array of struct attribute.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In case a fork or a clone system fails in copy_process and the error
handling does the mmput() at the bad_fork_cleanup_mm label, the
following warning messages will appear on the console:

  BUG: non-zero pgtables_bytes on freeing mm: 16384

The reason for that is the tricks we play with mm_inc_nr_puds() and
mm_inc_nr_pmds() in init_new_context().

A normal 64-bit process has 3 levels of page table, the p4d level and
the pud level are folded. On process termination the free_pud_range()
function in mm/memory.c will subtract 16KB from pgtable_bytes with a
mm_dec_nr_puds() call, but there actually is not really a pud table.

One issue with this is the fact that pgtable_bytes is usually off
by a few kilobytes, but the more severe problem is that for a failed
fork or clone the free_pgtables() function is not called. In this case
there is no mm_dec_nr_puds() or mm_dec_nr_pmds() that go together with
the mm_inc_nr_puds() and mm_inc_nr_pmds in init_new_context().
The pgtable_bytes will be off by 16384 or 32768 bytes and we get the
BUG message. The message itself is purely cosmetic, but annoying.

To fix this override the mm_pmd_folded, mm_pud_folded and mm_p4d_folded
function to check for the true size of the address space.
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The common mm code calls mm_dec_nr_pmds() and mm_dec_nr_puds()
in free_pgtables() if the address range spans a full pud or pmd.
If mm_dec_nr_puds/mm_dec_nr_pmds are non-empty due to configuration
settings they blindly subtract the size of the pmd or pud table from
pgtable_bytes even if the pud or pmd page table layer is folded.

Add explicit mm_[pmd|pud]_folded checks to the four pgtable_bytes
accounting functions mm_inc_nr_puds, mm_inc_nr_pmds, mm_dec_nr_puds
and mm_dec_nr_pmds. As the check for folded page tables can be
overwritten by the architecture, this allows to keep a correct
pgtable_bytes value for platforms that use a dynamic number of
page table levels.
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add three architecture overrideable functions to test if the
p4d, pud, or pmd layer of a page table is folded or not.
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Change the currently empty defines for __PAGETABLE_PMD_FOLDED,
__PAGETABLE_PUD_FOLDED and __PAGETABLE_P4D_FOLDED to return 1.
This makes it possible to use __is_defined() to test if the
preprocessor define exists.
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Currently .vmlinux.info section of uncompressed vmlinux elf image is
included into the data segment and load address specified as 0. That
extends data segment to address 0 and makes "text" and "data" segments
overlap.
Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000001000 0x0000000000100000 0x0000000000100000
                 0x0000000000ead03c 0x0000000000ead03c  R E    0x1000
  LOAD           0x0000000000eaf000 0x0000000000000000 0x0000000000000000
                 0x0000000001a13400 0x000000000233b520  RWE    0x1000
  NOTE           0x0000000000eae000 0x0000000000fad000 0x0000000000fad000
                 0x000000000000003c 0x000000000000003c         0x4

 Section to Segment mapping:
  Segment Sections...
   00     .text .notes
   01     .rodata __ksymtab __ksymtab_gpl __ksymtab_strings __param
   __modver .data..ro_after_init __ex_table .data __bug_table .init.text
   .exit.text .exit.data .altinstructions .altinstr_replacement
   .nospec_call_table .nospec_return_table .boot.data .init.data
   .data..percpu .bss .vmlinux.info
   02     .notes

Later when vmlinux.bin is produced from vmlinux, .vmlinux.info section
is removed. But elf vmlinux file, even though it is not bootable anymore,
used for debugging and loadable segments overlap should be avoided.

Utilize special ":NONE" phdr specification to avoid adding .vmlinux.info
into loadable data segment. Also set .vmlinux.info section type to INFO,
which allows to get a not-loadable info CONTENTS section.

Since minimal supported version of binutils 2.20 does not have
--dump-section objcopy option, make .vmlinux.info section loadable during
info.bin creation to get actual section contents.
Reported-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

According to Documentation/kbuild/makefiles.txt all build targets
using if_changed should use FORCE as well. Add missing FORCE to make
sure vmlinux decompressor targets are rebuild properly when not just
immediate prerequisites have changed but also when build command differs.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull sparc fix from David Miller:
 "Build regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix VDSO build with older binutils.

Merge tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This patch set contains a lot (at least, for me) of improvements to
  the RISC-V kernel port:

   - The removal of some cacheinfo values that were bogus.

   - On systems with F but without D the kernel will not show the F
     extension to userspace, as it isn't actually supported.

   - Support for futexes.

   - Removal of some unused code.

   - Cleanup of some menuconfig entries.

   - Support for systems without a floating-point unit, and for building
     kernels that will never use the floating-point unit.

   - More fixes to the RV32I port, which regressed again. It's really
     time to get this into a regression test somewhere so I stop
     breaking it. Thanks to Zong for resurrecting it again!

   - Various fixes that resulted from a year old review of our original
     patch set that I finally got around to.

   - Various improvements to SMP support, largely based around having
     switched to logical hart numbering, as well as some interrupt
     improvements. This one is in the same patch set as above, thanks to
     Atish for sheparding everything though as my patch set was a bit of
     a mess.

  I'm pretty sure this is our largest patch set since the original
  kernel contribution, and it's certainly the one with the most
  contributors. While I don't have anything else I know I'm going to
  submit for the merge window, I would be somewhat surprised if I didn't
  screw anything up.

  Thanks for the help, everyone!"

* tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  RISC-V: Cosmetic menuconfig changes
  riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  RISC-V: remove the unused return_to_handler export
  RISC-V: Add futex support.
  RISC-V: Add FP register ptrace support for gdb.
  RISC-V: Mask out the F extension on systems without D
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Show IPI stats
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Use Linux logical CPU number instead of hartid
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Use mmgrab()
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  ...

Pull KVM updates from Radim Krčmář:
 "ARM:
   - Improved guest IPA space support (32 to 52 bits)

   - RAS event delivery for 32bit

   - PMU fixes

   - Guest entry hardening

   - Various cleanups

   - Port of dirty_log_test selftest

  PPC:
   - Nested HV KVM support for radix guests on POWER9. The performance
     is much better than with PR KVM. Migration and arbitrary level of
     nesting is supported.

   - Disable nested HV-KVM on early POWER9 chips that need a particular
     hardware bug workaround

   - One VM per core mode to prevent potential data leaks

   - PCI pass-through optimization

   - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base

  s390:
   - Initial version of AP crypto virtualization via vfio-mdev

   - Improvement for vfio-ap

   - Set the host program identifier

   - Optimize page table locking

  x86:
   - Enable nested virtualization by default

   - Implement Hyper-V IPI hypercalls

   - Improve #PF and #DB handling

   - Allow guests to use Enlightened VMCS

   - Add migration selftests for VMCS and Enlightened VMCS

   - Allow coalesced PIO accesses

   - Add an option to perform nested VMCS host state consistency check
     through hardware

   - Automatic tuning of lapic_timer_advance_ns

   - Many fixes, minor improvements, and cleanups"

* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
  Revert "kvm: x86: optimize dr6 restore"
  KVM: PPC: Optimize clearing TCEs for sparse tables
  x86/kvm/nVMX: tweak shadow fields
  selftests/kvm: add missing executables to .gitignore
  KVM: arm64: Safety check PSTATE when entering guest and handle IL
  KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
  arm/arm64: KVM: Enable 32 bits kvm vcpu events support
  arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
  KVM: arm64: Fix caching of host MDCR_EL2 value
  KVM: VMX: enable nested virtualization by default
  KVM/x86: Use 32bit xor to clear registers in svm.c
  kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
  kvm: vmx: Defer setting of DR6 until #DB delivery
  kvm: x86: Defer setting of CR2 until #PF delivery
  kvm: x86: Add payload operands to kvm_multiple_exception
  kvm: x86: Add exception payload fields to kvm_vcpu_events
  kvm: x86: Add has_payload and payload to kvm_queued_exception
  KVM: Documentation: Fix omission in struct kvm_vcpu_events
  KVM: selftests: add Enlightened VMCS test
  ...

Pull cgroup updates from Tejun Heo:
 "All trivial changes - simplification, typo fix and adding
  cond_resched() in a netclassid update loop"

* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, netclassid: add a preemption point to write_classid
  rdmacg: fix a typo in rdmacg documentation
  cgroup: Simplify cgroup_ancestor

Pull printk updates from Petr Mladek:

 - Fix two more locations where printf formatting leaked pointers

 - Better log_buf_len parameter handling

 - Add prefix to messages from printk code

 - Do not miss messages on other consoles when the log is replayed on a
   new one

 - Reduce race between console registration and panic() when the log
   might get replayed on all consoles

 - Some cont buffer code clean up

 - Call console only when there is something to do (log vs cont buffer)

* tag 'printk-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Hash printed address for netdev bits fallback
  lib/vsprintf: Hash legacy clock addresses
  lib/vsprintf: Prepare for more general use of ptr_to_id()
  lib/vsprintf: Make ptr argument conts in ptr_to_id()
  printk: fix integer overflow in setup_log_buf()
  printk: do not preliminary split up cont buffer
  printk: lock/unlock console only for new logbuf entries
  printk: keep kernel cont support always enabled
  printk: Give error on attempt to set log buffer length to over 2G
  printk: Add KBUILD_MODNAME and remove a redundant print prefix
  printk: Correct wrong casting
  printk: Fix panic caused by passing log_buf_len to command line
  printk: CON_PRINTBUFFER console registration is a bit racy
  printk: Do not miss new messages when replaying the log

Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...

Pull LoadPin updates from James Morris:
 "From Kees: This is a small reporting improvement and the param change
  needed for the ordering series (but since the loadpin change is
  desired and separable, I'm putting it here)"

* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LoadPin: Rename boot param "enabled" to "enforce"
  LoadPin: Report friendly block device name

Pull smack updates from James Morris:
 "From Casey: three patches for Smack for 4.20. Two clean up warnings
  and one is a rarely encountered ptrace capability check"

* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: Mark expected switch fall-through
  Smack: ptrace capability use fixes
  Smack: remove set but not used variable 'root_inode'

Pull TPM updates from James Morris:
 "From Jarkko: The only new feature is non-blocking operation for
  /dev/tpm0"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: Restore functionality to xen vtpm driver.
  tpm: add support for nonblocking operation
  tpm: add ptr to the tpm_space struct to file_priv
  tpm: Make SECURITYFS a weak dependency
  tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated
  tpm: fix response size validation in tpm_get_random()

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "From Mimi: This contains a couple of bug fixes, including one for a
  recent problem with calculating file hashes on overlayfs, and some
  code cleanup"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: add Jarkko as maintainer for trusted keys
  ima: open a new file instance if no read permissions
  ima: fix showing large 'violations' or 'runtime_measurements_count'
  security/integrity: remove unnecessary 'init_keyring' variable
  security/integrity: constify some read-only data
  vfs: require i_size <= SIZE_MAX in kernel_read_file()

Pull more ->lookup() cleanups from Al Viro:
 "Some ->lookup() instances are still overcomplicating the life
  for themselves, open-coding the stuff that would be handled by
  d_splice_alias() just fine.

  Simplify a couple of such cases caught this cycle and document
  d_splice_alias() intended use"

* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Document d_splice_alias() calling conventions for ->lookup() users.
  simplify btrfs_lookup()
  clean erofs_lookup()

Pull alpha syscall glue updates from Al Viro:
 "Two old patches making alpha syscall glue a bit less mysterious"

* 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: unify the glue for sigreturn-like syscalls
  alpha: use alpha_ni_syscall only for syscall zero

Pull compat_ioctl fixes from Al Viro:
 "A bunch of compat_ioctl fixes, mostly in bluetooth.

  Hopefully, most of fs/compat_ioctl.c will get killed off over the next
  few cycles; between this, tty series already merged and Arnd's work
  this cycle ought to take a good chunk out of the damn thing..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hidp: fix compat_ioctl
  hidp: constify hidp_connection_add()
  cmtp: fix compat_ioctl
  bnep: fix compat_ioctl
  compat_ioctl: trim the pointless includes

Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...

Pull timekeeping updates from Thomas Gleixner:
 "The timers and timekeeping departement provides:

   - Another large y2038 update with further preparations for providing
     the y2038 safe timespecs closer to the syscalls.

   - An overhaul of the SHCMT clocksource driver

   - SPDX license identifier updates

   - Small cleanups and fixes all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  tick/sched : Remove redundant cpu_online() check
  clocksource/drivers/dw_apb: Add reset control
  clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
  clocksource/drivers: Unify the names to timer-* format
  clocksource/drivers/sh_cmt: Add R-Car gen3 support
  dt-bindings: timer: renesas: cmt: document R-Car gen3 support
  clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
  clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
  clocksource/drivers/sh_cmt: Fixup for 64-bit machines
  clocksource/drivers/sh_tmu: Convert to SPDX identifiers
  clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
  clocksource/drivers/sh_cmt: Convert to SPDX identifiers
  clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
  clocksource: Convert to using %pOFn instead of device_node.name
  tick/broadcast: Remove redundant check
  RISC-V: Request newstat syscalls
  y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
  y2038: socket: Change recvmmsg to use __kernel_timespec
  y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
  y2038: utimes: Rework #ifdef guards for compat syscalls
  ...

Older versions of bintutils do not allow symbol math across different
segments on sparc:

====================
Assembler messages:
99: Error: operation combines symbols in different segments
====================

This is controlled by whether or not DIFF_EXPR_OK is defined in
gas/config/tc-*.h and for sparc this was not the case until mid-2017.

So we have to patch between %stick and %tick another way.

Do what powerpc does and emit two versions of the relevant functions,
one using %tick and one using %stick, and patch the symbols in the
dynamic symbol table.

Fixes: 2f6c9bf3 ("sparc: Improve VDSO instruction patching.")
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound updates from Takashi Iwai:
 "There have been little changes in ALSA core stuff, but ASoC core still
  kept rolling for the continued restructuring. The rest are lots of
  small driver-specific changes and some minor API updates. Here are
  highlights:

  General:
  - Appropriate fall-through annotations everywhere
  - Some code cleanup in memalloc code, handling non-cacahed pages more
    commonly in the helper
  - Deployment of SNDRV_PCM_INFO_SYNC_APPLPTR flag consistently

  Drivers:
  - More HD-audio CA0132 codec improvement for supporting other Creative
    boards
  - Plumbing legacy HD-audio codecs as ASoC BE on Intel SST; this will
    give move support of existing HD-audio devices with DSP
  - A few device-specific HD-audio quirks as usual
  - New quirk for RME CC devices and correction for B&W PX for USB-audio
  - FireWire: code refactoring including devres usages

  ASoC Core:
  - Continued componentization works; it's almost done!
  - A bunch of new for_each_foo macros
  - Cleanups and fixes in DAPM code

  ASoC Drivers:
  - MCLK support for several different devices, including CS42L51, STM32
    SAI, and MAX98373
  - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
    MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
    TI PCM3060"

* tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
  ASoC: stm32: sai: fix master clock naming
  ASoC: stm32: add clock dependency for sai
  ALSA: hda/ca0132 - Actually fix microphone issue
  ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks
  ASoC: wm2000: Remove wm2000_read helper function
  ASoC: cs42l51: fix mclk support
  ASoC: wm_adsp: Log addresses as 8 digits in wm_adsp_buffer_populate
  ASoC: wm_adsp: Rename memory fields in wm_adsp_buffer
  ASoC: cs42l51: add mclk support
  ASoC: stm32: sai: set sai as mclk clock provider
  ASoC: dt-bindings: add mclk support to cs42l51
  ASoC: dt-bindings: add mclk provider support to stm32 sai
  ASoC: soc-core: fix trivial checkpatch issues
  ASoC: dapm: Add support for hw_free on CODEC to CODEC links
  ASoC: Intel: kbl_da7219_max98927: minor white space clean up
  ALSA: i2c/cs8427: Fix int to char conversion
  ALSA: doc: Brush up the old writing-an-alsa-driver
  ASoC: rsnd: tidyup SSICR::SWSP for TDM
  ASoC: rsnd: enable TDM settings for SSI parent
  ASoC: pcm3168a: add hw constraint for capture channel
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
  qla2xxx, lpfc, libsas, hisi_sas.

  In addition there's a set of mostly small updates to the target
  subsystem a set of conversions to the generic DMA API, which do have
  some potential for issues in the older drivers but we'll handle those
  as case by case fixes.

  A new myrs driver for the DAC960/mylex raid controllers to replace the
  block based DAC960 which is also being removed by Jens in this merge
  window.

  Plus the usual slew of trivial changes"

[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
  wonder. There's also a "myrb" driver, where the 'b' stands for
  'block'. Truly, somebody has got mad naming skillz. - Linus ]

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
  scsi: myrs: Fix the processor absent message in processor_show()
  scsi: myrs: Fix a logical vs bitwise bug
  scsi: hisi_sas: Fix NULL pointer dereference
  scsi: myrs: fix build failure on 32 bit
  scsi: fnic: replace gross legacy tag hack with blk-mq hack
  scsi: mesh: switch to generic DMA API
  scsi: ips: switch to generic DMA API
  scsi: smartpqi: fully convert to the generic DMA API
  scsi: vmw_pscsi: switch to generic DMA API
  scsi: snic: switch to generic DMA API
  scsi: qla4xxx: fully convert to the generic DMA API
  scsi: qla2xxx: fully convert to the generic DMA API
  scsi: qla1280: switch to generic DMA API
  scsi: qedi: fully convert to the generic DMA API
  scsi: qedf: fully convert to the generic DMA API
  scsi: pm8001: switch to generic DMA API
  scsi: nsp32: switch to generic DMA API
  scsi: mvsas: fully convert to the generic DMA API
  scsi: mvumi: switch to generic DMA API
  scsi: mpt3sas: switch to generic DMA API
  ...

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...

Pull dmaengine updates from Vinod Koul:

 - Support for ColdFire mcf5441x edma controller

 - Support for link list mode in sprd dma

 - More users of managed dmaenginem_async_device_register API

 - Cyclic mode support in owl dma driver

 - DT updates for renesas drivers, dma-jz4780 updates and support for
   JZ4770, JZ4740 and JZ4725B controllers

 - Removal of deprecated dma_slave_config direction in dmaengine
   drivers, few more users will be removed in next cycle and eventually
   removed.

 - Minor updates to idma64, ioat, pxa, ppc drivers

* tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits)
  dmaengine: ppc4xx: fix off-by-one build failure
  dmaengine: owl: Fix warnings generated during build
  dmaengine: fsl-edma: remove dma_slave_config direction usage
  dmaengine: rcar-dmac: set scatter/gather max segment size
  dmaengine: mmp_tdma: remove dma_slave_config direction usage
  dmaengine: ep93xx_dma: remove dma_slave_config direction usage
  dmaengine: k3dma: remove dma_slave_config direction usage
  dmaengine: k3dma: dont use direction for memcpy
  dmaengine: imx-dma: remove dma_slave_config direction usage
  dmaengine: idma: remove dma_slave_config direction usage
  dmaengine: hsu: remove dma_slave_config direction usage
  dmaengine: dw: remove dma_slave_config direction usage
  dmaengine: jz4740: remove dma_slave_config direction usage
  dmaengine: coh901318: remove dma_slave_config direction usage
  dmaengine: bcm2835: remove dma_slave_config direction usage
  dmaengine: at_hdmac: remove dma_slave_config direction usage
  dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
  dmaengine: ioat: fix prototype of ioat_enumerate_channels
  dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
  dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
  ...

Pull EDAC updates from Borislav Petkov:
 "The EDAC tree was busier than usual this cycle as the shortlog below
  shows.

  Also, this pull request is carrying an ACPI DSM driver which is used
  to ask the platform to supply the DIMM location of a reported hardware
  error and thus simplify all the EDAC logic when trying to map the
  error address to the respective DIMM.

  Core EDAC updates:

   - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
     Hygon Dhyana support (Pu Wen)

   - sb_edac: New maintainer + fixes (Tony Luck) Error reporting
     improvements and fixes (Qiuxu Zhuo)

   - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
     error accounting (Fan Wu)

   - altera_edac: Stratix10 support and refactoring (Thor Thayer)

  Out of tree addition:

   - acpi_adxl: Address Translation interface using an ACPI DSM (Tony
     Luck)

   - the usual amount of other misc fixes and cleanups all over"

* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
  ACPI/ADXL: Add address translation interface using an ACPI DSM
  EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
  EDAC, skx_edac: Fix logical channel intermediate decoding
  EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
  EDAC, altera: Work around int-to-pointer-cast warnings
  EDAC, amd64: Add Hygon Dhyana support
  EDAC: Raise the maximum number of memory controllers
  arm64: dts: stratix10: Add peripheral EDAC nodes
  EDAC, altera: Add Stratix10 peripheral support
  EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
  arm64: dts: stratix10: Add SDRAM node
  EDAC, altera: Combine Stratix10 and Arria10 probe functions
  arm64: dts: stratix10: Additions to EDAC System Manager
  EDAC, i7core: Remove set but not used variable pvt
  EDAC, ghes: Use CPER module handles to locate DIMMs
  EDAC: Correct DIMM capacity unit symbol
  EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
  EDAC, sb_edac: Fix reporting for patrol scrubber errors
  EDAC, sb_edac: Return early on ADDRV bit and address type test
  MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
  ...

Pull libnvdimm updates from Dan Williams:

 - Improve the efficiency and performance of reading nvdimm-namespace
   labels. Reduce the amount of label data read at driver load time by a
   few orders of magnitude. Reduce heavyweight call-outs to
   platform-firmware routines.

 - Handle media errors located in the 'struct page' array stored on a
   persistent memory namespace. Let the kernel clear these errors rather
   than an awkward userspace workaround.

 - Fix Address Range Scrub (ARS) completion tracking. Correct occasions
   where the kernel indicates completion of ARS before submission.

 - Fix asynchronous device registration reference counting.

 - Add support for reporting an nvdimm dirty-shutdown-count via sysfs.

 - Fix various small libnvdimm core and uapi issues.

* tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
  acpi, nfit: Further restrict userspace ARS start requests
  acpi, nfit: Fix Address Range Scrub completion tracking
  UAPI: ndctl: Remove use of PAGE_SIZE
  UAPI: ndctl: Fix g++-unsupported initialisation in headers
  tools/testing/nvdimm: Populate dirty shutdown data
  acpi, nfit: Collect shutdown status
  acpi, nfit: Introduce nfit_mem flags
  libnvdimm, label: Fix sparse warning
  nvdimm: Use namespace index data to reduce number of label reads needed
  nvdimm: Split label init out from the logic for getting config data
  nvdimm: Remove empty if statement
  nvdimm: Clarify comment in sizeof_namespace_index
  nvdimm: Sanity check labeloff
  libnvdimm, dimm: Maximize label transfer size
  libnvdimm, pmem: Fix badblocks population for 'raw' namespaces
  libnvdimm, namespace: Drop the repeat assignment for variable dev->parent
  libnvdimm, region: Fail badblocks listing for inactive regions
  libnvdimm, pfn: during init, clear errors in the metadata area
  libnvdimm: Set device node in nd_device_register
  libnvdimm: Hold reference on parent while scheduling async init
  ...

Pull power supply and reset updates from Sebastian Reichel:

 - Add Spreadtrum SC2731 charger driver

 - bq25890-charger: Add BQ25896 support

 - bq27xxx-battery: Add support for BQ27411

 - qcom-pon: Add pms405 pon support

 - cros-charger: add support for dedicated port

 - misc fixes

* tag 'for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: max8925: mark expected switch fall-through
  power: supply: fix spelling mistake "Gauage" -> "Gauge"
  power: reset: qcom-pon: Add pms405 pon support
  power: supply: bq27xxx: Add support for BQ27411
  power: supply: Add Spreadtrum SC2731 charger support
  dt-bindings: power: Add Spreadtrum SC2731 charger documentation
  power: supply: twl4030_charger: disable eoc interrupt on linear charge
  power: supply: twl4030_charger: fix charging current out-of-bounds
  power: supply: bq25890_charger: fix semicolon.cocci warnings
  power: supply: max8998-charger: Fix platform data retrieval
  power: supply: cros: add support for dedicated port
  mfd: cros: add charger port count command definition
  power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
  power: reset: at91-poweroff: rename at91_shdwc_base member of struct shdwc
  power: reset: at91-poweroff: make sclk part of struct shdwc
  power: reset: at91-poweroff: make mpddrc_base part of struct shdwc
  power: reset: at91-poweroff: use only one poweroff function
  power: reset: at91-poweroff: switch to slow clock before shutdown
  power: reset: convert to SPDX identifiers
  power: supply: ab8500_fg: silence uninitialized variable warnings
  ...

Pull HID updates from Jiri Kosina:

 - rumble support for Xbox One S, from Andrey Smirnov

 - high-resolution support for Logitech mice, from Harry Cutts

 - support for recent devices requiring the HID parse to be able to cope
   with tag report sizes > 256

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits)
  HID: usbhid: Add quirk for Redragon/Dragonrise Seymur 2
  HID: wacom: Work around HID descriptor bug in DTK-2451 and DTH-2452
  HID: google: add dependency on Cros EC for Hammer
  HID: elan: fix spelling mistake "registred" -> "registered"
  HID: google: drop superfluous const before SIMPLE_DEV_PM_OPS()
  HID: google: add support tablet mode switch for Whiskers
  mfd: cros: add "base attached" MKBP switch definition
  Input: reserve 2 events code because of HID
  HID: magicmouse: add support for Apple Magic Trackpad 2
  HID: i2c-hid: override HID descriptors for certain devices
  HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad
  HID: logitech: fix a used uninitialized GCC warning
  HID: intel-ish-hid: using list_head for ipc write queue
  HID: intel-ish-hid: use resource-managed api
  HID: intel_ish-hid: Enhance API to get ring buffer sizes
  HID: intel-ish-hid: use helper function to search client id
  HID: intel-ish-hid: ishtp: add helper function for client search
  HID: intel-ish-hid: use helper function to access client buffer
  HID: intel-ish-hid: ishtp: add helper functions for client buffer operation
  HID: intel-ish-hid: use helper function for private driver data set/get
  ...

Pull backlight updates from Lee Jones:
 "Old Drivers
   - Remove driver for S6E63M0
   - Remove driver for LD9040

  Fix-ups
   - Trivial (email address update); adp*_bl
   - Use 'atomic' PWM API; pwm_bl

  Bug Fixes
   - Remove pointless boolen '&ptr' check; lm3639_bl"

* tag 'backlight-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: Remove ld9040 driver
  backlight: Remove s6e63m0 driver
  backlight: lm3639: Unconditionally call led_classdev_unregister
  backlight: pwm_bl: Switch to using "atomic" PWM API
  backlight: Update MODULE AUTHOR email address

Pull MFD updates from Lee Jones:
 "New Drivers
   - Add support for USART SPI to AT91*

  New Functionality
   - Add support for Audio CODECs to motorola-cpcap

  Fix-ups
   - DT documentation fix-ups; atmel-usart
   - Staticise functions/structs; spi-at91-usart, arizona-core
   - Constify; ti-lmu
   - Fix memory leaks; menelaus
   - Change device 'wake-up' status; ti_am335x_tscadc, max8997
   - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997
   - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers),
   - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_*
   - Build as module; sec-irq
   - Use new %pOFn printk format for device_node.name; max77620
   - Remove unused code; madera
   - Use generic MACROs; intel_msic, intel_soc_pmic_crc
   - Move to GPIOD; ti-lmu
   - Use managed resources; ti-lmu

  Bug Fixes
   - Add missing headers; at91-usart
   - Prevent device from entering low-power mode; arizona-core
   - Poll for BOOT_DONE to avoid still-booting NACK; madera-core
   - Prevent ADC read from shutting down device; mc13xxx-core"

* tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: cros_ec: Avoid unneeded internal declaration warning
  mfd: ti-lmu: Use of_device_get_match_data() helper
  mfd: ti-lmu: Use managed resource for everything
  mfd: ti-lmu: Switch to GPIOD
  mfd: ti-lmu: constify mfd_cell tables
  mfd: max8997: Disable interrupt handling for suspend/resume cycle
  mfd: max8997: Enale irq-wakeup unconditionally
  mfd: arizona: Make array mclk_name static, shrinks object size
  MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC
  mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier.
  mfd: Sort headers alphabetically for Intel PMIC drivers
  mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well
  mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro
  mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro
  mfd: intel_msic: Use DEFINE_RES_IRQ() macro
  mfd: motorola-cpcap: Add audio-codec support
  mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values
  mfd: madera: Remove unused forward reference
  mfd: max77620: Convert to using %pOFn instead of device_node.name
  mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE
  ...

Pull documentation updates from Jonathan Corbet:
 "This is a fairly typical cycle for documentation. There's some welcome
  readability improvements for the formatted output, some LICENSES
  updates including the addition of the ISC license, the removal of the
  unloved and unmaintained 00-INDEX files, the deprecated APIs document
  from Kees, more MM docs from Mike Rapoport, and the usual pile of typo
  fixes and corrections"

* tag 'docs-4.20' of git://git.lwn.net/linux: (41 commits)
  docs: Fix typos in histogram.rst
  docs: Introduce deprecated APIs list
  kernel-doc: fix declaration type determination
  doc: fix a typo in adding-syscalls.rst
  docs/admin-guide: memory-hotplug: remove table of contents
  doc: printk-formats: Remove bogus kobject references for device nodes
  Documentation: preempt-locking: Use better example
  dm flakey: Document "error_writes" feature
  docs/completion.txt: Fix a couple of punctuation nits
  LICENSES: Add ISC license text
  LICENSES: Add note to CDDL-1.0 license that it should not be used
  docs/core-api: memory-hotplug: add some details about locking internals
  docs/core-api: rename memory-hotplug-notifier to memory-hotplug
  docs: improve readability for people with poorer eyesight
  yama: clarify ptrace_scope=2 in Yama documentation
  docs/vm: split memory hotplug notifier description to Documentation/core-api
  docs: move memory hotplug description into admin-guide/mm
  doc: Fix acronym "FEKEK" in ecryptfs
  docs: fix some broken documentation references
  iommu: Fix passthrough option documentation
  ...

Pull ext4 updates from Ted Ts'o:

 - further restructure ext4 documentation

 - fix up ext4's delayed allocation for bigalloc file systems

 - fix up some syzbot-detected races in EXT4_IOC_MOVE_EXT,
   EXT4_IOC_SWAP_BOOT, and ext4_remount

 - ... and a few other miscellaneous bugs and optimizations.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
  ext4: fix use-after-free race in ext4_remount()'s error path
  ext4: cache NULL when both default_acl and acl are NULL
  docs: promote the ext4 data structures book to top level
  docs: move ext4 administrative docs to admin-guide/
  jbd2: fix use after free in jbd2_log_do_checkpoint()
  ext4: propagate error from dquot_initialize() in EXT4_IOC_FSSETXATTR
  ext4: fix setattr project check in fssetxattr ioctl
  docs: make ext4 readme tables readable
  docs: fix ext4 documentation table formatting problems
  docs: generate a separate ext4 pdf file from the documentation
  ext4: convert fault handler to use vm_fault_t type
  ext4: initialize retries variable in ext4_da_write_inline_data_begin()
  ext4: fix EXT4_IOC_SWAP_BOOT
  ext4: fix build error when DX_DEBUG is defined
  ext4: fix argument checking in EXT4_IOC_MOVE_EXT
  ext4: fix reserved cluster accounting at page invalidation time
  ext4: adjust reserved cluster count when removing extents
  ext4: reduce reserved cluster count by number of allocated clusters
  ext4: fix reserved cluster accounting at delayed write time
  ext4: add new pending reservation mechanism
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added 1) superblock checksum feature, 2)
  implemented new mount option which we can disable/enable checkpoint to
  provide atomic updates of entire filesystem, 3) refactored quota
  operations to enhance its consistency along with checkpoint, 4) fixed
  subtle IO hang conditions and roll-forward recovery flow to resurrect
  any fsync'ed inode metadata.

  Enhancements:
   - add checksum to keep superblock contents more safe
   - add checkpoint=disable/enable to support A/B update of entire filesystem
   - use plug for readahead IO in readdir
   - add more IO counts to avoid block layer hacks

  Bug fixes:
   - prevent data corruption issue for hardware encryption
   - fix IO hang issues when GC is heavily triggered
   - add missing up_read in __write_node_page
   - recover inode metadata during roll-forward recovery flow
   - fix null pointer dereference issue in wrongly configured discard map

  There are some more sanity checks and minor bug fixes as well"

* tag 'f2fs-for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
  f2fs: fix to keep project quota consistent
  f2fs: guarantee journalled quota data by checkpoint
  f2fs: cleanup dirty pages if recover failed
  f2fs: fix data corruption issue with hardware encryption
  f2fs: fix to recover inode->i_flags of inode block during POR
  f2fs: spread f2fs_set_inode_flags()
  f2fs: fix to spread clear_cold_data()
  Revert "f2fs: fix to clear PG_checked flag in set_page_dirty()"
  f2fs: account read IOs and use IO counts for is_idle
  f2fs: fix to account IO correctly for cgroup writeback
  f2fs: fix to account IO correctly
  f2fs: remove request_list check in is_idle()
  f2fs: allow to mount, if quota is failed
  f2fs: update REQ_TIME in f2fs_cross_rename()
  f2fs: do not update REQ_TIME in case of error conditions
  f2fs: remove unneeded disable_nat_bits()
  f2fs: remove unused sbi->trigger_ssr_threshold
  f2fs: shrink sbi->sb_lock coverage in set_file_temperature()
  f2fs: use rb_*_cached friends
  f2fs: fix to recover cold bit of inode block during POR
  ...

Pul xfs updates from Dave Chinner:
 "There's not a huge amount of change in this cycle - Darrick has been
  out of action for a couple of months (hence me sending the last few
  pull requests), so we decided a quiet cycle mainly focussed on bug
  fixes was a good idea. Darrick will take the helm again at the end of
  this merge window.

  FYI, I may be sending another update later in the cycle - there's a
  pending rework of the clone/dedupe_file_range code that fixes numerous
  bugs that is spread amongst the VFS, XFS and ocfs2 code. It has been
  reviewed and tested, Al and I just need to work out the details of the
  merge, so it may come from him rather than me.

  Summary:

   - only support filesystems with unwritten extents

   - add definition for statfs XFS magic number

   - remove unused parameters around reflink code

   - more debug for dangling delalloc extents

   - cancel COW extents on extent swap targets

   - fix quota stats output and clean up the code

   - refactor some of the attribute code in preparation for parent
     pointers

   - fix several buffer handling bugs"

* tag 'xfs-4.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (21 commits)
  xfs: cancel COW blocks before swapext
  xfs: clear ail delwri queued bufs on unmount of shutdown fs
  xfs: use offsetof() in place of offset macros for __xfsstats
  xfs: Fix xqmstats offsets in /proc/fs/xfs/xqmstat
  xfs: fix use-after-free race in xfs_buf_rele
  xfs: Add attibute remove and helper functions
  xfs: Add attibute set and helper functions
  xfs: Add helper function xfs_attr_try_sf_addname
  xfs: Move fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h
  xfs: issue log message on user force shutdown
  xfs: fix buffer state management in xrep_findroot_block
  xfs: always assign buffer verifiers when one is provided
  xfs: xrep_findroot_block should reject root blocks with siblings
  xfs: add a define for statfs magic to uapi
  xfs: print dangling delalloc extents
  xfs: fix fork selection in xfs_find_trim_cow_extent
  xfs: remove the unused trimmed argument from xfs_reflink_trim_around_shared
  xfs: remove the unused shared argument to xfs_reflink_reserve_cow
  xfs: handle zeroing in xfs_file_iomap_begin_delay
  xfs: remove suport for filesystems without unwritten extent flag
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got 18 patches for this merge window, none of which are very
  major:

   - clean up the gfs2 block allocator to prepare for future performance
     enhancements (Andreas Gruenbacher)

   - fix a use-after-free problem (Andy Price)

   - patches that fix gfs2's broken rgrplvb mount option (me)

   - cleanup patches and error message improvements (me)

   - enable getlabel support (Steve Whitehouse and Abhi Das)

   - flush the glock delete workqueue at exit (Tim Smith)"

* tag 'gfs2-4.20.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix minor typo: couln't versus couldn't.
  gfs2: write revokes should traverse sd_ail1_list in reverse
  gfs2: Pass resource group to rgblk_free
  gfs2: Remove unnecessary gfs2_rlist_alloc parameter
  gfs2: Fix marking bitmaps non-full
  gfs2: Fix some minor typos
  gfs2: Rename bitmap.bi_{len => bytes}
  gfs2: Remove unused RGRP_RSRV_MINBYTES definition
  gfs2: Move rs_{sizehint, rgd_gh} fields into the inode
  gfs2: Clean up out-of-bounds check in gfs2_rbm_from_block
  gfs2: Always check the result of gfs2_rbm_from_block
  gfs2: getlabel support
  GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads
  gfs2: Don't leave s_fs_info pointing to freed memory in init_sbd
  gfs2: Use fs_* functions instead of pr_* function where we can
  gfs2: slow the deluge of io error messages
  gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
  gfs2: improve debug information when lvb mismatches are found