- 30 Nov, 2015 40 commits
-
-
Adam Ford authored
Setup UART2 for communication at 3MBps with flow control. Signed-off-by:
Adam Ford <adam.ford@logicpd.com> [tony@atomide.com: dropped the kim changes, that binding has been removed] Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Adam Ford authored
The development kit schematic expects VAUX1 to be 3.0V. Most users use the development kit as a reference. The development kit schematic expects VAUX4 to be 1.8V. VAUX4 powers VDDS_CSI2 on processor. If the voltage is too high it could damage the processor. If it's too low, it won't work. Signed-off-by: -
Adam Ford authored
When used with the Logic PD development kit, this makes the I2C buses match the BSP released by Logic PD. Signed-off-by: -
Adam Ford authored
Use the TWL4030 Codec with mcbsp2 on Torpedo. Signed-off-by:
-
Franklin S Cooper Jr authored
Add dma channel information to the gpmc. Although not enabled by default this will allow prefetch-dma to be used. Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by:
-
Neil Armstrong authored
Add dm816x DT entries for omap4-hwspinlock support as hwmod spinbox. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Remove invalid l3_main hwmod entry from dm816x DT ocp node. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
-
Neil Armstrong authored
Adds ti,timer-pwm property to timers 4 to 7 to permit usage of their PWM output fonctionnality via the dmtimer driver. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
-
Andrew F. Davis authored
Using constants for pinctrl allows better readability and removes redundancy with comments. AM33XX_IOPAD allows us to use part of the pinctrl physical address as in the TRM instead of an offset. Signed-off-by:
Andrew F. Davis <afd@ti.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macros to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by:
-
Javier Martinez Canillas authored
Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Also, use the mux defines instead of magic numbers for the padconf values when defining the pinctrl lines to make it more readable. Signed-off-by:
-
