- 22 Feb, 2022 5 commits
-
-
Ping-Ke Shih authored
Larry reported funny log entries [1] when he used rtl8821ce. These messages are not harmless, but not useful for users, so change them to rtw_dbg() level. By the way, I review all rtw_info() and change others to rtw_warn(). [1] https://lore.kernel.org/linux-wireless/c356d5ae-a7b3-3065-1121-64c446e70333@lwfinger.net/Reported-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220218035527.9835-1-pkshih@realtek.com
-
Yi-Tang Chiu authored
Set the boundaries of x'tal value to avoid extremely adjusted results, causing severely unexpected CFO. Signed-off-by:
Yi-Tang Chiu <chiuyitang@realtek.com> Signed-off-by:
Yuan-Han Zhang <yuanhan1020@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
Add handling to fill struct rtw89_txpwr_limit and rtw89_txpwr_limit_ru for 160Mhz bandwidth case. And enlarge RTW89_5G_BW_NUM because the chip under planning can support 160Mhz bandwidth on 5G band. Moreover, refine the filling of OFDM entry of struct rtw89_txpwr_limit by using the value corresponding to primary channel. E.g. center channel 38 (40Mhz bandwidth case) Originally OFDM entry was filled by value corresponding to 'ch - 2' (36) Now, we consider that it could be 36 or 40. E.g. cneter channel 42 (80Mhz bandwidth case) Originally OFDM entry was filled by value corresponding to 'ch - 6' (36) Now, we consider that it could be 36, 40, 44, or 48. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
Add declarations of 6G stuff and extend rtw89_channel_to_idx() to map 6G's channels to 6G channel indexes. While 6G, correspondingly read 6G's entry for tx power limit and limit_ru. After this, we should pay attention to chip_info::support_bands. If a chip declares 6G support, it must configure txpwr_lmt_6g and txpwr_lmt_ru_6g in case accessing NULL pointer while setting tx power limit/limit_ru on 6G band. Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2022-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.18 * Support UHB TAS enablement via BIOS; * Remove a bunch of W=1 warnings; * Add support for channel switch offload; * Support a new FW API command version; * Support 32 Rx AMPDU sessions in newer devices; * Support a few new FW API command versions; * Some debugging infra fixes; * A few fixes in the HE functionality; * Add a few new devices; * A bunch of fixes for W=1 and W=3 warnings; * Add support for a couple of new devices; * Fix a potential buffer underflow; * W=1 warnings clean up continues; * Some improvements and fixes in scanning; * More work on the Bz family of devices; * Add support for band disablement via BIOS; * Bump FW API version; * Fix config structure for one device; * Support a new FW API command version; * Support new queue allocation command; * Some more debugging improvements; * Some other small fixes, clean-ups and improvements.
-
- 21 Feb, 2022 10 commits
-
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
-
Tom Rix authored
Remove the second 'info'. Replacements 'adventages' with 'advantages' 'strenth' with 'strength' 'atleast' with 'at least' 'thr'u'' with 'through' 'capabilty' with 'capability' 'controll' with 'control' 'ourself' with 'ourselves' 'noone' with 'no one' 'cores' to 'core's' and 'core' Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jiri Kosina authored
ieee80211_tx_h_select_key() is performing a series of RCU dereferences, but rtw89_core_txq_push() is calling it (via ieee80211_tx_dequeue_ni()) without RCU read-side lock held; fix that. This addresses the splat below. ============================= WARNING: suspicious RCU usage 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E ----------------------------- net/mac80211/tx.c:593 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by kworker/u33:0/184: #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660 stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x2c0/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ============================= WARNING: suspicious RCU usage 5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E ----------------------------- net/mac80211/tx.c:607 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by kworker/u33:0/184: #0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660 stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x464/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Signed-off-by:Jiri Kosina <jkosina@suse.cz> Acked-by:
-
Ching-Te Ku authored
Enable Wi-Fi/BT mailbox 0x45 handshake and Wi-Fi MIMO power save mechanism for Bluetooth gaming controller. BTCOEX Version: 22020720-2020 Desired_BT_Coex_Ver: 0x20 Desired_WL_FW_Ver: 9.9.11 Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
In order to recognize the gaming controller HID, make a C2H/H2C/Mailbox handshake to collect all the connected information from BT. Signed-off-by:
-
Ching-Te Ku authored
To keep high sensitivity reaction, Bluetooth gaming controller will send packet very frequently, it will make WLAN performance very poor. To solve this situation, MIMO PS mechanism makes WLAN/BT own an antenna itself, WLAN quits 2SS performance but it can get a stable 1SS performance and Bluetooth gaming controller can keep sensitivity reaction at the same time. Signed-off-by:
-
Ching-Te Ku authored
If BT PTA counter can not update regularly, it will lead coex mechanism run into some unexpected state. Signed-off-by:
-
Ching-Te Ku authored
Disable power save TDMA mechanism under HFP COEX, so WLAN can TX/RX full time. Signed-off-by:
-
Chin-Yen Lee authored
In some case, wifi chip need to be configed to be TX/RX 1ss mode. For this mode, wifi components, such as MAC/BB/RF, need to be specially set, and driver need to send SMPS action frame to inform AP. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
- 18 Feb, 2022 25 commits
-
-
Kees Cook authored
To avoid a run-time false positive in the stricter FORTIFY_SOURCE memcpy() checks, split the memcpy() into the struct and the data. Additionally switch the data member to a flexible array to follow modern language conventions. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Dan Carpenter authored
Return -ENODEV instead of success on this error path. Fixes: dd36a507 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210816183930.GA2068@kiliSigned-off-by:
-
Colin Ian King authored
Currently the error -EIO is being assinged to variable ret when the READY_BIT is not set but the function iwlagn_mac_start returns 0 rather than ret. Fix this by returning ret instead of 0. Addresses-Coverity: ("Unused value") Fixes: 7335613a ("iwlwifi: move all mac80211 related functions to one place") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.comSigned-off-by:
-
Bixuan Cui authored
Fix memdup.cocci warning: ./drivers/net/wireless/intel/iwlwifi/mvm/rfi.c:110:8-15: WARNING opportunity for kmemdup Signed-off-by:
Bixuan Cui <cuibixuan@linux.alibaba.com> Link: https://lore.kernel.org/r/1635317920-84725-1-git-send-email-cuibixuan@linux.alibaba.comSigned-off-by:
-
Xiang wangx authored
Delete the redundant word 'the'. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20211216085756.11053-1-wangxiang@cdjrlc.comSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kmalloc(). For example: struct iwl_wipan_noa_data { ... u8 data[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Reported-by:Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220210060926.1608378-1-chi.minghao@zte.com.cnSigned-off-by:
-
Minghao Chi (CGEL ZTE) authored
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kzalloc(). Reported-by:
-
Cai Huoqing authored
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220209032322.37472-1-cai.huoqing@linux.devSigned-off-by:
-
Dan Carpenter authored
Change the comparison from ">" to ">=" to avoid accessing one element beyond the end of the ->per_mac_stats[] array. Fixes: 6324c173 ("iwlwifi: mvm: add support for statistics update version 15") Signed-off-by:
-
Mukesh Sisodiya authored
Send a command to FW once the driver completes the dump collection for the timepoint which requires the command to be send. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Miri Korenblit authored
During disassociation we're decreasing the phy's ref count. If the ref count becomes 0, we're configuring the phy ctxt to the default channel (the lowest channel which the device can operate on). Currently we're not checking whether the the default channel is enabled or not. Fix it by configuring the phy ctxt to the lowest channel which is enabled. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Johannes Berg authored
Due to some issues found in integration, the command now has the (old) station mask and TID in modify/remove instead of the BAID, adjust accordingly. Since we don't use modify yet (and never will with v1 of the API), just add v1 remove inside the existing union, and use that, this way we don't have to duplicate everything, only the remove code. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
This doesn't really exist in the firmware, it's just some leftover from older versions. Remove it. Signed-off-by:
-
Johannes Berg authored
Newer firmware versions will support a new queue allocation command, in order to deal with MLD where multiple stations are used for a single queue. Add support for the new command. This requires some refactoring of the queue allocation API, which now gets - the station mask instead of the station ID - the flags without the "enable" flag, since that's no longer used in the new API Additionally, this new API now requires that we remove queues before removing a station, the firmware will no longer do that internally. Also add support for that. Signed-off-by:
-
Mukesh Sisodiya authored
Support dump size limitation based on the TLV by firmware. This is needed for limited memory systems so only the most important dumps are sent by driver. Signed-off-by:
-
Yaara Baruch authored
The device was defined under Ma instead of So, and add 2 missing killer devices from the 211 family. Signed-off-by:
Yaara Baruch <yaara.baruch@intel.com> Signed-off-by:
-
Abhishek Naik authored
Add logs in rs_fw_rate_init function. It helps in verifying TLC Configuration while debuging TLC related bugs. Update kernel doc for TLC_MNG_CONFIG_CMD with correct version of struct iwl_tlc_config_cmd. Signed-off-by:
Abhishek Naik <abhishek.naik@intel.com> Fixes: ae4c1bb0 ("iwlwifi: rs: add support for TLC config command ver 4") Signed-off-by:
-
Johannes Berg authored
It's always zero, just remove it. Signed-off-by:
-
Johannes Berg authored
The command ID here is always hard-coded to the same, so we can remove it. In the future we actually need to make this configurable, but that doesn't need to be on each call, it can be done through the transport configuration. Signed-off-by:
-
Johannes Berg authored
Use the ERR_PTR() machinery to return the queue or an error, instead of having a separate out parameter. Signed-off-by:
-
Luca Coelho authored
There was a small copy and paste mistake in the doc declaration of iwl_fw_ini_addr_val. Fix it. Signed-off-by:
-
Mordechay Goodstein authored
This info helps for additional info in case we have issues with HPM state at boot time. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
The firmware will soon stop removing the session protection for us after association. While this was convenient, it was not symmetric. Always remove the session protection after association, even for devices that support the new API. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
There's no need to have this in a different place, it's only used in a single C file (sta.c). Signed-off-by:
-
Miri Korenblit authored
We are setting the PPE Thresholds in STA_HE_CTXT_CMD according to HE PHY Capabilities IE. As EHT is introduced, we will have to set this thresholds according to EHT PHY Capabilities IE if we're in an EHT connection. Some parts of the code can be used for both HE and EHT. Put this parts in functions which will be used in the patch which adds support for EHT PPE. Signed-off-by:
-
