Use of kcore is predicated upon it matching the recorded data.  If the
kernel has been relocated at boot time (i.e. since the data was
recorded) then do not use kcore.

Note that it is possible to make a copy of kcore at the time the data is
recorded using 'perf buildid-cache'.  Then the perf tools will use the
copy because it does match the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-7-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now that ref_reloc_sym is set up when the kernel map is created,
'perf record' does not need to pass the symbol names to
perf_event__synthesize_kernel_mmap() which can read the values needed
from ref_reloc_sym directly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-6-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The ref_reloc_sym is always needed for the kernel map in order to check
for relocation.  Consequently set it up when the kernel map is created.
Otherwise it was only being set up by 'perf record'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-5-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Separate out the logic used to make the kallsyms full path name for a
machine.  It will be reused in a subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-4-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Separate out the logic used to find the start address of the reference
symbol used to track kernel relocation.  kallsyms__get_function_start()
is used in subsequent patches.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-3-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Kernel maps map memory addresses to file offsets.

For symbol annotation, objdump needs the object VMA addresses.  For an
unrelocated kernel, that is the same as the memory address.

The addresses passed to objdump for symbol annotation did not take into
account kernel relocation.

This patch fixes that.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1391004884-10334-2-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 71ae8aac ("lib: introduce arch optimized hash library") added an
include to <linux/hash.h> for setting up an architecture specific fast
hash.

Since perf includes directly the non-uapi kernel header, it cannot find
<asm/hash.h> on non-x86 and thus prevents perf to be compiled on every
architecture other than x86.

The problem is the inclusion of <asm/hash.h> in hash.h that results in
the following error originating from util/evlist.c:

  fatal error: asm/hash.h: No such file or directory

This commit simply adds an empty <asm/hash.h> stub/file to fix the
compile issue on non-x86 architectures.

As perf does not use any of these new functions, it fixes the
compilation and therefore seems to be the most appropriate solution to
go with.
Signed-off-by: Francesco Fusco <ffusco@redhat.com>
Link: http://lkml.kernel.org/r/2cf8143aad65a6aa6fe30325ef8a65847141afa2.1390829373.git.ffusco@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Someone got the load and store barriers mixed up for AAAAARGH64.  Turn
them the right side up.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Fixes: a94d342b ("tools/perf: Add required memory barriers")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20140124154002.GF31570@twins.programming.kicks-ass.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some kernels contain C++ code, and thus their symbols need to be
demangled.  This allows 'perf kvm top' to generate readable output.
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/26f71bf5bf7ee1408e3f1a803556d5df18223ef1.1390420726.git.avi@cloudius-systems.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

set_perf_event_pending() was removed in e360adbe ("irq_work: Add
generic hardirq context callbacks").
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/4c54761865d40210be0628cb84701afc5d57b5d8.1390686193.git.baruch@tkos.co.ilSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  * Fix traceevent plugin path definitions (Josh Boyer)

  * Load map before using map->map_ip() (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In map_groups__find_symbol() map->map_ip is used without ensuring the
map is loaded. Then the address passed to map->map_ip isn't mapped at
the first time.

E.g. below code always fails to get a symbol at the first call;

	addr = /* Somewhere in the kernel text */
	symbol_conf.try_vmlinux_path = true;
	symbol__init();
	host_machine = machine__new_host();
	sym = machine__find_kernel_function(host_machine,
					 addr, NULL, NULL);
	/* Note that machine__find_kernel_function calls
	   map_groups__find_symbol */

This ensures it by calling map__load before using it in
map_groups__find_symbol().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140123022950.7206.17357.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The plugindir_SQ definition contains $(prefix) which is not needed as
the $(libdir) definition already contains prefix in it.  This leads to
the path including an extra prefix in it, e.g. /usr/usr/lib64.

The -DPLUGIN_DIR defintion includes DESTDIR.  This is incorrect, as it
sets the plugin search path to include the value of DESTDIR.  DESTDIR is
a mechanism to install in a non-standard location such as a chroot or an
RPM build root.  In the RPM case, this leads to the search path being
incorrect after the resulting RPM is installed (or in some cases an RPM
build failure).

Remove both of these unnecessary inclusions.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140122150147.GK16455@hansolo.jdub.homelinux.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf tooling fixes and updates from Arnaldo Carvalho de Melo:

 * Fix JIT symbol resolution on heap (Namhyung Kim)

 * Fix wrong SVG height in 'timechart' (Stanislav Fomichev)

 * Free temp cpu_map in perf_session__cpu_bitmap (Stanislav Fomichev)

 * Fix NULL pointer reference bug with event unit in 'stat' (Stephane Eranian)

 * Fix memory corruption of xyarray when cpumask is used (Stephane Eranian)

 * Ensure sscanf does not overrun the "mem" field (Alan Cox)

 * Add support for the xtensa architecture (Baruch Siach)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Gaurav reported that perf cannot profile JIT program if it executes the
code on heap.  This was because current map__new() only handle JIT on
anon mappings - extends it to handle no_dso (heap, stack) case too.

This patch assumes JIT profiling only provides dynamic function symbols
so check the mapping type to distinguish the case.  It'd provide no
symbols for data mapping - if we need to support symbols on data
mappings later it should be changed.
Reported-by: Gaurav Jain <gjain@fb.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Gaurav Jain <gjain@fb.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gaurav Jain <gjain@fb.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389836971-3549-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull x32 uapi changes from Peter Anvin:
 "This is the first few of a set of patches by H.J.  Lu to make the
  kernel uapi headers usable for x32, as required by some non-glibc
  libcs.

  These particular patches make the stat and statfs structures usable"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32: Use __kernel_long_t for __statfs_word
  x86, x32: Use __kernel_long_t/__kernel_ulong_t in x86-64 stat.h

Pull x86 cpufeature and mpx updates from Peter Anvin:
 "This includes the basic infrastructure for MPX (Memory Protection
  Extensions) support, but does not include MPX support itself.  It is,
  however, a prerequisite for KVM support for MPX, which I believe will
  be pushed later this merge window by the KVM team.

  This includes moving the functionality in
  futex_atomic_cmpxchg_inatomic() into a new function in uaccess.h so it
  can be reused - this will be used by the final MPX patches.

  The actual MPX functionality (map management and so on) will be pushed
  in a future merge window, when ready"

* 'x86/mpx' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel/mpx: Remove unused LWP structure
  x86, mpx: Add MPX related opcodes to the x86 opcode map
  x86: replace futex_atomic_cmpxchg_inatomic() with user_atomic_cmpxchg_inatomic
  x86: add user_atomic_cmpxchg_inatomic at uaccess.h
  x86, xsave: Support eager-only xsave features, add MPX support
  x86, cpufeature: Define the Intel MPX feature flag

Pull x86 kernel address space randomization support from Peter Anvin:
 "This enables kernel address space randomization for x86"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: Clarify RANDOMIZE_BASE_MAX_OFFSET
  x86, kaslr: Remove unused including <linux/version.h>
  x86, kaslr: Use char array to gain sizeof sanity
  x86, kaslr: Add a circular multiply for better bit diffusion
  x86, kaslr: Mix entropy sources together as needed
  x86/relocs: Add percpu fixup for GNU ld 2.23
  x86, boot: Rename get_flags() and check_flags() to *_cpuflags()
  x86, kaslr: Raise the maximum virtual address to -1 GiB on x86_64
  x86, kaslr: Report kernel offset on panic
  x86, kaslr: Select random position from e820 maps
  x86, kaslr: Provide randomness functions
  x86, kaslr: Return location from decompress_kernel
  x86, boot: Move CPU flags out of cpucheck
  x86, relocs: Add more per-cpu gold special cases

Pull leftover x86 fixes from Ingo Molnar:
 "Two leftover fixes that did not make it into v3.13"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add check for number of available vectors before CPU down
  x86, cpu, amd: Add workaround for family 16h, erratum 793

Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure

Pull Intel SoC changes from Ingo Molnar:
 "Improved Intel SoC platform support"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc, apic: Unbreak static (MSR) calibration when CONFIG_X86_LOCAL_APIC=n
  x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs
  arch: x86: New MailBox support driver for Intel SOC's

Pull x86 mm changes from Ingo Molnar:
 "A cleanup, a fix and ASLR support for hugetlb mappings"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/numa: Fix 32-bit kernel NUMA boot
  x86/mm: Implement ASLR for hugetlb mappings
  x86/mm: Unify pte_to_pgoff() and pgoff_to_pte() helpers

Pull x86 microcode loader updates from Ingo Molnar:
 "There are two main changes in this tree:

   - AMD microcode early loading fixes
   - some microcode loader source files reorganization"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Move to a proper location
  x86, microcode, AMD: Fix early ucode loading
  x86, microcode: Share native MSR accessing variants
  x86, ramdisk: Export relocated ramdisk VA

Pull Intel MID updates from Ingo Molnar:
 "This tree improves Intel MID (Mobile Internet Device) platform
  support:

   - Merrifield platform support (David Cohen)
   - Clovertrail platform support (Kuppuswamy Sathyanarayanan)
   - Various cleanups and fixes (David Cohen)"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel_mid: Replace memcpy with struct assignment
  x86, intel-mid: Return proper error code from get_gpio_by_name()
  x86, intel-mid: Check get_gpio_by_name() error code on platform code
  x86, intel-mid: sfi_handle_*_dev() should check for pdata error code
  x86, intel-mid: Remove deprecated X86_MDFLD and X86_WANT_INTEL_MID configs
  x86, intel-mid: Add Merrifield platform support
  x86, intel-mid: Add Clovertrail platform support
  x86, intel-mid: Move Medfield code out of intel-mid.c core file

Pull x86 EFI changes from Ingo Molnar:
 "This consists of two main parts:

   - New static EFI runtime services virtual mapping layout which is
     groundwork for kexec support on EFI (Borislav Petkov)

   - EFI kexec support itself (Dave Young)"

* 'x86-efi-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/efi: parse_efi_setup() build fix
  x86: ksysfs.c build fix
  x86/efi: Delete superfluous global variables
  x86: Reserve setup_data ranges late after parsing memmap cmdline
  x86: Export x86 boot_params to sysfs
  x86: Add xloadflags bit for EFI runtime support on kexec
  x86/efi: Pass necessary EFI data for kexec via setup_data
  efi: Export EFI runtime memory mapping to sysfs
  efi: Export more EFI table variables to sysfs
  x86/efi: Cleanup efi_enter_virtual_mode() function
  x86/efi: Fix off-by-one bug in EFI Boot Services reservation
  x86/efi: Add a wrapper function efi_map_region_fixed()
  x86/efi: Remove unused variables in __map_region()
  x86/efi: Check krealloc return value
  x86/efi: Runtime services virtual mapping
  x86/mm/cpa: Map in an arbitrary pgd
  x86/mm/pageattr: Add last levels of error path
  x86/mm/pageattr: Add a PUD error unwinding path
  x86/mm/pageattr: Add a PTE pagetable populating function
  x86/mm/pageattr: Add a PMD pagetable populating function
  ...

Pull x86 TLB detection update from Ingo Molnar:
 "A single change that extends our TLB cache size detection+reporting
  code"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Detect more TLB configuration

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu, amd: Fix a shadowed variable situation
  um, x86: Fix vDSO build
  x86: Delete non-required instances of include <linux/init.h>
  x86, realmode: Pointer walk cleanups, pull out invariant use of __pa()
  x86/traps: Clean up error exception handler definitions

Pull x86/build changes from Ingo Molnar:
 "Misc smaller improvements"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Move intcall() to the .inittext section
  x86, boot: Use .code16 instead of .code16gcc
  x86, sparse: Do not force removal of __user when calling copy_to/from_user_nocheck()

Pull x86/asm changes from Ingo Molnar:
 "Misc optimizations"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Slightly tweak the access_ok() C variant for better code
  x86: Replace assembly access_ok() with a C variant
  x86-64, copy_user: Use leal to produce 32-bit results
  x86-64, copy_user: Remove zero byte check before copy user buffer.

Pull x86/apic changes from Ingo Molnar:
 "Two main changes:

   - improve local APIC Error Status Register reporting robustness

   - add the 'disable_cpu_apicid=x' boot parameter for kexec booting"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
  x86, apic, kexec: Add disable_cpu_apicid kernel parameter
  x86/apic: Read Error Status Register correctly

Pull timer changes from Ingo Molnar:
  - ARM clocksource/clockevent improvements and fixes
  - generic timekeeping updates: TAI fixes/improvements, cleanups
  - Posix cpu timer cleanups and improvements
  - dynticks updates: full dynticks bugfixes, optimizations and cleanups

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  clocksource: Timer-sun5i: Switch to sched_clock_register()
  timekeeping: Remove comment that's mostly out of date
  rtc-cmos: Add an alarm disable quirk
  timekeeper: fix comment typo for tk_setup_internals()
  timekeeping: Fix missing timekeeping_update in suspend path
  timekeeping: Fix CLOCK_TAI timer/nanosleep delays
  tick/timekeeping: Call update_wall_time outside the jiffies lock
  timekeeping: Avoid possible deadlock from clock_was_set_delayed
  timekeeping: Fix potential lost pv notification of time change
  timekeeping: Fix lost updates to tai adjustment
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
  clocksource: vt8500: Remove deprecated IRQF_DISABLED
  clocksource: tegra: Remove deprecated IRQF_DISABLED
  clocksource: misc drivers: Remove deprecated IRQF_DISABLED
  clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
  clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
  clocksource: armada-370-xp: Enable timer divider only when needed
  clocksource: clksrc-of: Warn if no clock sources are found
  clocksource: orion: Switch to sched_clock_register()
  ...

This patch fixes a memory corruption problem with the xyarray when the
evsel fds get closed at the end of the run_perf_stat() call.

It could be triggered with:

 # perf stat -a -e power/energy-cores/ ls

When cpumask are used by events (.e.g, RAPL or uncores) then the evsel
fds are allocated based on the actual number of CPUs monitored. That
number can be smaller than the total number of CPUs on the system.

The problem arises at the end by perf stat closes the fds twice. When
fds are closed, their entry in the xyarray are set to -1.

The first close() on the evsel is made from __run_perf_stat() and it
uses the actual number of CPUS for the event which is how the xyarray
was allocated for.

The second is from perf_evlist_close() but that one is on the total
number of CPUs in the system, so it assume the xyarray was allocated to
cover it. However it was not, and some writes corrupt memory.

The fix is in perf_evlist_close() is to first try with the evsel->cpus
if present, if not use the evlist->cpus. That fixes the problem.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389972846-6566-3-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

No need to set evsel->fd to NULL after calling perf_evsel__free_fd(), as
this method already does that.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-wu6kul8fpapr8iyqm685ewtf@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Make the parsing robust.

(perf has some other assumptions that BUFSIZE <= MAX_PATH which are
 not touched here)

Reported-by: Jackie Chang
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-g2uoiwbrpiimb63rx32qv8ne@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes a problem with the handling of the newly introduced
optional event unit. The following cmdline caused a segfault:

 $ perf stat -e cpu/event-0x3c/ ls

This patch fixes the problem with the default setting for alias->unit
which was eventually causing the segfault.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389972846-6566-2-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Tested using kernel tracepoints on a QEMU simulated environment.

Kernel support for perf depends on the patch "xtensa: enable
HAVE_PERF_EVENTS", which is scheduled for v3.14.

Hardware performance counters are not supported under xtensa yet.
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-xtensa@linux-xtensa.org
Link: http://lkml.kernel.org/r/aafcdb22f04e2d3188d2938528939481be56b649.1389608855.git.baruch@tkos.co.ilSigned-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This method uses a temporary struct cpu_map to figure out the cpus
present in the received cpu list in string form, but it failed to free
it after returning. Fix it.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1390217980-22424-3-git-send-email-stfomichev@yandex-team.ru
[ Use goto + err = -1 to do the delete just once, in the normal exit path ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If we call perf timechart with -p 0 arguments, it means we don't want
any tasks related data. It works, but space for tasks data is reserved
in the generated SVG. Remove this unused empty space via passing 0 as
count to the open_svg.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1390217980-22424-2-git-send-email-stfomichev@yandex-team.ruSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We don't support LWP yet, don't give the impression that we do:
represent the LWP state as opaque 128 bytes, the way Linux sees it
currently.

Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ecarmjtfKpanpAapfck6dj6g@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull scheduler changes from Ingo Molnar:

 - Add the initial implementation of SCHED_DEADLINE support: a real-time
   scheduling policy where tasks that meet their deadlines and
   periodically execute their instances in less than their runtime quota
   see real-time scheduling and won't miss any of their deadlines.
   Tasks that go over their quota get delayed (Available to privileged
   users for now)

 - Clean up and fix preempt_enable_no_resched() abuse all around the
   tree

 - Do sched_clock() performance optimizations on x86 and elsewhere

 - Fix and improve auto-NUMA balancing

 - Fix and clean up the idle loop

 - Apply various cleanups and fixes

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  sched: Fix __sched_setscheduler() nice test
  sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
  sched: Fix up attr::sched_priority warning
  sched: Fix up scheduler syscall LTP fails
  sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
  sched/core: Fix htmldocs warnings
  sched/deadline: No need to check p if dl_se is valid
  sched/deadline: Remove unused variables
  sched/deadline: Fix sparse static warnings
  m68k: Fix build warning in mac_via.h
  sched, thermal: Clean up preempt_enable_no_resched() abuse
  sched, net: Fixup busy_loop_us_clock()
  sched, net: Clean up preempt_enable_no_resched() abuse
  sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
  sched/preempt, locking: Rework local_bh_{dis,en}able()
  sched/clock, x86: Avoid a runtime condition in native_sched_clock()
  sched/clock: Fix up clear_sched_clock_stable()
  sched/clock, x86: Use a static_key for sched_clock_stable
  sched/clock: Remove local_irq_disable() from the clocks
  sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
  ...